# !/bin/bash
#
# Architect Installation Framework (2016-2017)
#
# Written by Carl Duff and @mandog for Archlinux
# Heavily modified and re-written by @Chrysostomus to install Manjaro instead
# Contributors: @papajoker, @oberon and the Manjaro-Community.
#
# This program is free software, provided under the GNU General Public License
# as published by the Free Software Foundation. So feel free to copy, distribute,
# or modify it as you wish.

setup_profiles() {
    # setup profiles with either git
    PROFILES="$DATADIR/profiles"
    clear
    # install git if not already installed
    inst_needed git
    # download manjaro-tools.-isoprofiles git repo
    if [[ -e $PROFILES ]]; then
        #git -C $PROFILES pull 2>$ERR
        profile-validate -r 2>$ERR
        check_for_error "pull profiles repo" $?
    else
        profile-validate -r 2>$ERR
        #git clone -b manjaro-architect --depth 1 https://gitlab.manjaro.org/profiles-and-settings/iso-profiles.git $PROFILES 2>$ERR
        check_for_error "clone profiles repo" $?
    fi
}

enable_services() {
    # Enable services in the chosen profile
    echo "Enabling services"
    source $profile
    [[ -z ${enable_systemd} ]] && \
      enable_systemd=('avahi-daemon' 'bluetooth' 'cronie' 'ModemManager' 'NetworkManager' 'org.cups.cupsd' 'tlp' 'haveged' 'ufw' 'apparmor' 'snapd.apparmor' 'snapd' 'fstrim.timer')
    echo "${enable_systemd[@]}" | xargs -n1 > /tmp/.services
    for service in $(cat /tmp/.services); do
        if [[ -e "/mnt/usr/lib/systemd/system/$service.service" ]]; then
            arch_chroot "systemctl enable $service" 2>$ERR && echo "enabled service $service"
        fi
    done
    check_for_error "enable $(cat /tmp/.services | tr '\n' ' ')" $?

    # enable display manager for systemd
    if [[ "$(cat /tmp/.display-manager)" == lightdm ]]; then
        if arch_chroot "pacman -Qq lightdm" > /dev/null; then
            set_lightdm_greeter
            arch_chroot "systemctl enable lightdm" 2>$ERR
            check_for_error "enable lightdm" "$?"
        else
            echo "lightdm was listed but not actually installed. No display-manager was enabled"
        fi
    elif [[ "$(cat /tmp/.display-manager)" == sddm ]]; then
        arch_chroot "systemctl enable sddm" 2>$ERR
        check_for_error "enable sddm" "$?"
    elif [[ "$(cat /tmp/.display-manager)" == gdm ]]; then
        arch_chroot "systemctl enable gdm" 2>$ERR
        check_for_error "enable gdm" "$?"
    else
        check_for_error "no DM installed."
        echo "no display manager was installed"
        sleep 2
    fi

    # if we are using a zfs we should enable the zfs services
    if [ $ZFS == 1 ]; then
        arch_chroot "systemctl enable zfs.target" 2>$ERR
        check_for_error "enable zfs.target" "$?"
        arch_chroot "systemctl enable zfs-import-cache" 2>$ERR
        check_for_error "enable zfs-import-cache" "$?"
        arch_chroot "systemctl enable zfs-mount" 2>$ERR
        check_for_error "enable zfs-mount" "$?"
        arch_chroot "systemctl enable zfs-import.target" 2>$ERR
        check_for_error "enable zfs-import.target" "$?"
        # we also need create the cachefile
        zpool set cachefile=/etc/zfs/zpool.cache $(findmnt ${MOUNTPOINT} -lno SOURCE | awk -F / '{print $1}') 2>$ERR
        check_for_error "create zpool cache" "$?"
        cp /etc/zfs/zpool.cache ${MOUNTPOINT}/etc/zfs/zpool.cache 2>$ERR
        check_for_error "copy cache file" "$?"
    fi
}

install_extra() {
    # Offer to install various "common" packages.
    local options=() nb=0
    cpkgs="manjaro-settings-manager pamac octopi pacli pacui fish fisherman zsh zsh-completions \
      manjaro-zsh-config mhwd-chroot bmenu clonezilla snapper snap-pac manjaro-tools-iso manjaro-tools-base manjaro-tools-pkg"
    for p in ${cpkgs}; do
        ! grep "$p" /mnt/.desktop && options+=("$p" "" off)
    done
    nb="$((${#options[@]}/3))"; (( nb>20 )) && nb=20 # if list too long limit
    DIALOG " $_InstComTitle " --checklist "\n$_InstComBody\n\n$_UseSpaceBar\n  " 0 50 $nb "${options[@]}" 2>${PACKAGES}

    # If at least one package, install.
    if [[ $(cat ${PACKAGES}) != "" ]]; then
        clear
        basestrap -i ${MOUNTPOINT} $(cat ${PACKAGES}) 2>$ERR
        check_for_error "basestrap -i ${MOUNTPOINT} $(cat ${PACKAGES})" "$?"
    fi
}

filter_packages() {
    DIALOG " $_PkgList " --infobox "\n$_PlsWaitBody\n " 0 0
    # Parse package list based on user input and remove parts that don't belong to pacman
    # If desktop is selected, add those packages to packages to be installed.
    if [[ -e /mnt/.desktop ]]; then
        cat "$pkgs_src" /mnt/.desktop >> $pkgs_target 2>$ERR
        check_for_error "$FUNCNAME" $?
    else
        cat "$pkgs_src" >> $pkgs_target 2>$ERR
        check_for_error "$FUNCNAME" $?
    fi

    # Remove any packages tagged with >openrc and remove >systemd tags
    sed -i '/>openrc/d' $pkgs_target
    sed -i 's/>systemd //g' $pkgs_target

    if [[ "$(uname -m)" == "x86_64" ]]; then
        # Remove any packages tagged with >i686 and remove >x86_64 tags
        sed -i '/>i686/d' $pkgs_target
        sed -i '/>nonfree_i686/d' $pkgs_target
        sed -i 's/>x86_64 //g' $pkgs_target
    else
        # Remove any packages tagged with >x86_64 and remove >i686 tags
        sed -i '/>x86_64/d' $pkgs_target
        sed -i '/>nonfree_x86_64/d' $pkgs_target
        sed -i 's/>i686 //g' $pkgs_target
    fi

    # If multilib repo is enabled, install multilib packages
    if grep -q "^[multilib]" /etc/pacman.conf; then
        # Remove >multilib tags
        sed -i 's/>multilib //g' $pkgs_target
        sed -i 's/>nonfree_multilib //g' $pkgs_target
    else
        # Remove lines with >multilib tag
        sed -i '/>multilib/d' $pkgs_target
        sed -i '/>nonfree_multilib/d' $pkgs_target
    fi

    if grep -q ">extra" $pkgs_target; then
        # User to select base|extra profile
        DIALOG " $_ExtraTitle " --no-cancel --menu "\n$_ExtraBody\n " 0 0 2 \
            "1" "full" \
            "2" "minimal" 2>/tmp/.version

        if [[ $(cat /tmp/.version) -eq 2 ]]; then
            check_for_error "selected 'minimal' profile"
            touch /tmp/.minimal
        else
            check_for_error "selected 'full' profile"
            [[ -e /tmp/.minimal ]] && rm /tmp/.minimal
        fi
    fi

    if [[ -e /tmp/.minimal ]]; then
        # Remove >extra tags
        sed -i 's/>basic //g' $pkgs_target
        sed -i '/>extra/d' $pkgs_target
    else
        # Remove >basic tags
        sed -i 's/>extra //g' $pkgs_target
        sed -i '/>basic/d' $pkgs_target
    fi
    # remove >manjaro flags and >sonar flags+pkgs until we support it properly
    sed -i '/>sonar/d' $pkgs_target
    sed -i 's/>manjaro //g' $pkgs_target

    # Does the system have a battery?
    if [[ -z "$(echo /sys/class/power_supply/BAT*)" ]]; then
        # No battery was detected. Remove TLP
        sed -i '/tlp/d' $pkgs_target
    fi
    # Remove commented lines
    # remove everything except the first word of every lines
    sed -i 's/\s.*$//' $pkgs_target
    # Remove lines with #
    sed -i '/#/d' $pkgs_target
    # remove KERNEL variable
    sed -i '/KERNEL/d' $pkgs_target
    # Remove empty lines
    sed -i '/^\s*$/d' $pkgs_target

    # Remove packages that have been dropped from repos
    pacman -Ssq > /tmp/.available_packages
    pacman -Sgq >> /tmp/.available_packages
    grep -f /tmp/.available_packages $pkgs_target > /tmp/.tmp
    mv /tmp/.tmp $pkgs_target
}

install_base() {
    if [[ -e /mnt/.base_installed ]]; then
        DIALOG " $_InstBseTitle " --yesno "\n$_WarnInstBase\n " 0 0 && rm /mnt/.base_installed || return 0
    fi
    # Prep variables
    setup_profiles
    pkgs_src=$PROFILES/shared/Packages-Root
    pkgs_target=/mnt/.base
    BTRF_CHECK=$(echo "btrfs-progs" "" off)
    F2FS_CHECK=$(echo "f2fs-tools" "" off)
    mhwd-kernel -l | awk '/linux/ {print $2}' > /tmp/.available_kernels
    kernels=$(cat /tmp/.available_kernels)

    # Create the base list of packages
    echo "" > /mnt/.base

    declare -i loopmenu=1
    while ((loopmenu)); do
        # Choose kernel and possibly base-devel
        DIALOG " $_InstBseTitle " --checklist "\n$_InstStandBseBody$_UseSpaceBar\n " 0 0 15 \
          "yay + base-devel" "-" off \
          $(cat /tmp/.available_kernels | awk '$0=$0" - off"') 2>${PACKAGES} || { loopmenu=0; return 0; }
        if [[ ! $(grep "linux" ${PACKAGES}) ]]; then
            # Check if a kernel is already installed
            ls ${MOUNTPOINT}/boot/*.img >/dev/null 2>&1
            if [[ $? == 0 ]]; then
                DIALOG " Check Kernel " --msgbox "\nlinux-$(ls ${MOUNTPOINT}/boot/*.img | cut -d'-' -f2 | grep -v ucode.img | sort -u) detected \n " 0 0
                check_for_error "linux-$(ls ${MOUNTPOINT}/boot/*.img | cut -d'-' -f2) already installed"
                loopmenu=0
            else
                DIALOG " $_ErrTitle " --msgbox "\n$_ErrNoKernel\n " 0 0
            fi
        else
            cat ${PACKAGES} | sed 's/+ \|\"//g' | tr ' ' '\n' | tr '+' '\n' >> /mnt/.base
            echo " " >> /mnt/.base
            grep -f /tmp/.available_kernels /mnt/.base > /tmp/.chosen_kernels
            check_for_error "selected: $(cat ${PACKAGES})"
            loopmenu=0
        fi
    done

    local zfs_is_checked
    [[ $ZFS == 1 ]] && zfs_is_checked="on" || zfs_is_checked="off"

    # Choose wanted kernel modules
    DIALOG " $_ChsAddPkgs " --checklist "\n$_UseSpaceBar\n " 0 0 12 \
      "KERNEL-headers" "-" off \
      "KERNEL-acpi_call" "-" off \
      "KERNEL-ndiswrapper" "-" off \
      "KERNEL-broadcom-wl" "-" off \
      "KERNEL-r8168" "-" off \
      "KERNEL-rt3562sta" "-" off \
      "KERNEL-tp_smapi" "-" off \
      "KERNEL-vhba-module" "-" off \
      "KERNEL-virtualbox-host-modules" "-" off \
      "KERNEL-spl" "-" $zfs_is_checked \
      "KERNEL-zfs" "-" $zfs_is_checked 2>/tmp/.modules || return 0

    if [[ $(cat /tmp/.modules) != "" ]]; then
        check_for_error "modules: $(cat /tmp/.modules)"
        for kernel in $(cat ${PACKAGES} | grep -vE '(yay|base-devel)'); do
            cat /tmp/.modules | sed "s/KERNEL/\n$kernel/g" >> /mnt/.base
        done
        echo " " >> /mnt/.base
    fi
    filter_packages
    # remove grub
    sed -i '/grub/d' /mnt/.base
    echo "nilfs-utils" >> /mnt/.base
    check_for_error "packages to install: $(cat /mnt/.base | sort | tr '\n' ' ')"
    clear
    set -o pipefail
    basestrap ${MOUNTPOINT} $(cat /mnt/.base) 2>$ERR |& tee /tmp/basestrap.log
    local err=$?
    set +o pipefail
    check_for_error "install basepkgs" $err || {
        DIALOG " $_InstBseTitle " --msgbox "\n$_InstFail\n " 0 0; HIGHLIGHT_SUB=2;
        if [[ $err == 255 ]]; then
            cat /tmp/basestrap.log
            read -n1 -s # or ? exit $err
        fi
        return 1;
    }

    # copy keymap and consolefont settings to target
    echo -e "KEYMAP=$(ini linux.keymap)\nFONT=$(ini linux.font)" > ${MOUNTPOINT}/etc/vconsole.conf
    check_for_error "configure vconsole"

    # mkinitcpio handling for specific filesystems
    case $(findmnt -ln -o FSTYPE ${MOUNTPOINT}) in
        btrfs)
            BTRFS_ROOT=1
            sed -e '/^HOOKS=/s/\ fsck//g' -e '/^MODULES=/s/"$/ btrfs"/g' -i ${MOUNTPOINT}/etc/mkinitcpio.conf
            check_for_error "root on btrfs volume. Amend mkinitcpio."
            ;;
        nilfs2)
            sed -e '/^HOOKS=/s/\ fsck//g' -i ${MOUNTPOINT}/etc/mkinitcpio.conf
            check_for_error "root on nilfs2 volume. Amend mkinitcpio."
            ;;
        zfs)
            ZFS_ROOT=1
            # the order is important here so strip out what we want changed and put it back in the correct order
            sed -e '/^HOOKS=/s/\ filesystems//g' -e '/^HOOKS=/s/\ keyboard/\ keyboard\ zfs\ filesystems/g' -e '/^HOOKS=/s/\ fsck//g' -e '/^FILES=/c\FILES=("/usr/lib/libgcc_s.so.1")' -i ${MOUNTPOINT}/etc/mkinitcpio.conf
            check_for_error "root on zfs volume. Amend mkinitcpio."
            ;;
        *)
            if $FSCK_HOOK; then
                # Remove fsck unless chosen otherwise
                sed -e '/^HOOKS=/s/\ fsck//g' -i ${MOUNTPOINT}/etc/mkinitcpio.conf
                check_for_error "no fsck specified. Removing fsck hook from mkinitcpio.conf."
            fi

            ;;
    esac


    # check to see if raid is needed for boot
    # if mount point is on raid then it is needed
    if [[ $(lsblk -lno TYPE,MOUNTPOINT | grep -E "raid.*${MOUNTPOINT}" | wc -l)> 0 ]]; then
        raid_needed=true

    # put all the lines of lsblk, before the mountpoint, into an array
    # iterate through the array backwards util a partition is reached
    # if raid was involved anywere between the mountpoint and partition,
    # then inital ramdisk configuration for raid is need
    else

        old_ifs="$IFS"
        IFS=$'\n'
        lsblk_lines=($(lsblk -lno TYPE,NAME,MOUNTPOINT | sed  "/\/${MOUNTPOINT:1}$/q"))
        IFS="$old_ifs"

        for (( i=${#lsblk_lines[@]}-1 ; i>=0 ; i-- )) ; do
            if [[ $(echo ${lsblk_lines[i]} | grep "^lvm" | wc -l) > 0 ]]; then
                    sed -i '/lvm2/b; s/\<block\>/& lvm2/' ${MOUNTPOINT}/etc/mkinitcpio.conf
                    continue
            fi
            if [[ $(echo ${lsblk_lines[i]} | grep "^crypt" | wc -l) > 0 ]]; then
                    sed -i '/encrypt/b; s/\<block\>/& encrypt/' ${MOUNTPOINT}/etc/mkinitcpio.conf
                    sed -i '/keymap/b; s/\<autodetect\>/& keymap/' ${MOUNTPOINT}/etc/mkinitcpio.conf
                    sed -i '/keyboard/b; s/\<autodetect\>/& keyboard/' ${MOUNTPOINT}/etc/mkinitcpio.conf
                    continue
            fi
            if [[ $(echo ${lsblk_lines[i]} | grep "^raid" | wc -l) > 0 ]]; then
                    raid_needed=true
                    raid_device_name=$(echo ${lsblk_lines[i]} | cut -f2 -d' ')
                    continue
            fi
            if [[ $(echo ${lsblk_lines[i]} | grep "^part" | wc -l) > 0 ]]; then
                    break
            fi
        done

    fi


    # add mkinitcpio raid binary and hook, if root partition is on raid
    if [ "$raid_needed" = true ]; then

        # auto assemble raid
        mdadm --detail --scan >> ${MOUNTPOINT}/etc/mdadm.conf

        # add raid initramfs hook
        sed -i 's/\<block\>/& mdadm_udev/' ${MOUNTPOINT}/etc/mkinitcpio.conf
        binaries_line_number=$(grep -n "^BINARIES=(" ${MOUNTPOINT}/etc/mkinitcpio.conf | cut -f1 -d':')
        sed -i "${binaries_line_number}s/^\(.\{10\}\)/\1mdmon/" ${MOUNTPOINT}/etc/mkinitcpio.conf

        # get newest kernel and initramfs
        newest_kernel=$(ls ${MOUNTPOINT}/lib/modules | grep '^[0-9]' | sort | tail -n 1)
        newest_initramfs=$(ls ${MOUNTPOINT}/boot | grep "initramfs" | grep -v "fallback"| sort | tail -n 1)

        # initramfs needs to be recomiled with raid support
        manjaro-chroot ${MOUNTPOINT} mkinitcpio -c /etc/mkinitcpio.conf -g /boot/${newest_initramfs} -k ${newest_kernel}

    fi

    recheck_luks

    # add luks and lvm hooks as needed
    ([[ $LVM -eq 1 ]] && [[ $LUKS -eq 0 ]]) && { sed -i 's/block filesystems/block lvm2 filesystems/g' ${MOUNTPOINT}/etc/mkinitcpio.conf 2>$ERR; check_for_error "add lvm2 hook" $?; }
    ([[ $LVM -eq 0 ]] && [[ $LUKS -eq 1 ]]) && { sed -i 's/block filesystems keyboard/block consolefont keymap keyboard encrypt filesystems/g' ${MOUNTPOINT}/etc/mkinitcpio.conf 2>$ERR; check_for_error "add luks hook" $?; }
    [[ $((LVM + LUKS)) -eq 2 ]] && { sed -i 's/block filesystems keyboard/block consolefont keymap keyboard encrypt lvm2 filesystems/g' ${MOUNTPOINT}/etc/mkinitcpio.conf 2>$ERR; check_for_error "add lvm/luks hooks" $?; }

    [[ $((LVM + LUKS + BTRFS_ROOT + ZFS_ROOT)) -gt 0 ]] && { arch_chroot "mkinitcpio -P" 2>$ERR; check_for_error "re-run mkinitcpio" $?; }


    # if we are using a zfs root we should enable the zfs services
    if [ $ZFS == 1 ]; then
        arch_chroot "systemctl enable zfs.target" 2>$ERR
        check_for_error "enable zfs.target" "$?"
        arch_chroot "systemctl enable zfs-import-cache" 2>$ERR
        check_for_error "enable zfs-import-cache" "$?"
        arch_chroot "systemctl enable zfs-mount" 2>$ERR
        check_for_error "enable zfs-mount" "$?"
        arch_chroot "systemctl enable zfs-import.target" 2>$ERR
        check_for_error "enable zfs-import.target" "$?"
        # we also need create the cachefile
        zpool set cachefile=/etc/zfs/zpool.cache $(findmnt ${MOUNTPOINT} -lno SOURCE | awk -F / '{print $1}') 2>$ERR
        check_for_error "create zpool cache" "$?"
        cp /etc/zfs/zpool.cache ${MOUNTPOINT}/etc/zfs/zpool.cache 2>$ERR
        check_for_error "copy cache file" "$?"
    fi

    # If specified, copy over the pacman.conf file to the installation
    if [[ $COPY_PACCONF -eq 1 ]]; then
        cp -f /etc/pacman.conf ${MOUNTPOINT}/etc/pacman.conf
        check_for_error "copy pacman.conf"
    fi

    # if branch was chosen, use that also in installed system. If not, use the system setting
    [[ -z $(ini branch) ]] && ini branch $(ini system.branch)
    sed -i "s/Branch =.*/Branch = $(ini branch)/;s/# //" ${MOUNTPOINT}/etc/pacman-mirrors.conf

    touch /mnt/.base_installed
    check_for_error "base installed succesfully."
    install_network_drivers
}

install_bootloader() {
    check_base
    if [[ $? -eq 0 ]]; then
        if [[ $SYSTEM == "BIOS" ]]; then
            bios_bootloader
        else
            uefi_bootloader
        fi
    else
        HIGHLIGHT_SUB=2
    fi

    # put all the lines of lsblk, before the mountpoint, into an array
    # iterate through the array backwards util a partition is reached
    # if luks and raid was involved anywere between the mountpoint and partition,
    # then grub configuration for raid and luks is needed

    old_ifs="$IFS"
    IFS=$'\n'
    lsblk_lines=($(lsblk -lno TYPE,NAME,MOUNTPOINT | sed  "/\/${MOUNTPOINT:1}$/q"))
    IFS="$old_ifs"

    for (( i=${#lsblk_lines[@]}-1 ; i>=0 ; i-- )) ; do
        if [[ $(echo ${lsblk_lines[i]} | grep "^crypt" | wc -l) > 0 ]]; then
                luks_device_name=$(echo ${lsblk_lines[i]} | cut -f2 -d' ')
                luks_needed=true
                continue
        fi
        if [[ $(echo ${lsblk_lines[i]} | grep "^raid" | wc -l) > 0 ]]; then
                raid_device_name=$(echo ${lsblk_lines[i]} | cut -f2 -d' ')
                raid_needed=true
                continue
        fi
        if [[ $(echo ${lsblk_lines[i]} | grep "^part" | wc -l) > 0 ]]; then
                break
        fi
    done

    # update grub for luks if needed
    if [ "$luks_needed" = true ] && [ "$raid_needed" = true ]; then
        sed -i "s/^GRUB_CMDLINE_LINUX=\"\"/GRUB_CMDLINE_LINUX=\"cryptdevice=\/dev\/md\/${raid_device_name}:${luks_device_name}\"/g" ${MOUNTPOINT}/etc/default/grub
        manjaro-chroot ${MOUNTPOINT} update-grub
    fi

}

uefi_bootloader() {
    #Ensure again that efivarfs is mounted
    [[ -z $(mount | grep /sys/firmware/efi/efivars) ]] && mount -t efivarfs efivarfs /sys/firmware/efi/efivars

    DIALOG " $_InstUefiBtTitle " --menu "\n$_bootloaderInfo\n " 23 60 3 \
      "1" "grub" \
      "2" "refind" \
      "3" "systemd-boot" 2>/tmp/.bootloader

        case $(cat /tmp/.bootloader) in
        "1") install_grub_uefi
            ;;
        "2") install_refind
            ;;
        "3") install_systemd_boot
            ;;
        esac
}

install_grub_uefi() {

    DIALOG " $_InstUefiBtTitle " --yesno "\n$_InstUefiBtBody\n " 0 0 || return 0
    if $(efibootmgr | cut -d\  -f2 | grep -q -o manjaro); then
        DIALOG " Bootloader id " --inputbox "\nInput the name identify your grub installation. Choosing an existing name overwrites it." 0 0 "manjaro" 2>/tmp/.bootid || return 0
        bootid=$(cat /tmp/.bootid)
    else
        bootid="manjaro"
    fi

    clear
    mkdir /mnt/hostlvm
    mount --bind /run/lvm /mnt/hostlvm

    # if root is encrypted, amend /etc/default/grub
    root_name=$(mount | awk '/\/mnt / {print $1}' | sed s~/dev/mapper/~~g | sed s~/dev/~~g)
    root_device=$(lsblk -i | tac | sed -r 's/^[^[:alnum:]]+//' | sed -n -e "/$root_name/,/disk/p" | awk '/disk/ {print $1}')
    root_part=$(lsblk -i | tac | sed -r 's/^[^[:alnum:]]+//' | sed -n -e "/$root_name/,/part/p" | awk '/part/ {print $1}' | tr -cd '[:alnum:]')
    boot_encrypted_setting

    # grub config changes for zfs root
    if [ $(findmnt -ln -o FSTYPE ${MOUNTPOINT}) == "zfs" ]; then
        # zfs needs ZPOOL_VDEV_NAME_PATH set to properly find the device
        echo ZPOOL_VDEV_NAME_PATH=YES >> ${MOUNTPOINT}/etc/environment
        export ZPOOL_VDEV_NAME_PATH=YES
        echo -e "# "'!'"/bin/bash
ln -s /hostlvm /run/lvm
export ZPOOL_VDEV_NAME_PATH=YES
pacman -S --noconfirm --needed grub efibootmgr dosfstools
# zfs is considered a sparse filesystem so we can't use SAVEDEFAULT
sed -e '/GRUB_SAVEDEFAULT/ s/^#*/#/' -i /etc/default/grub
# we need to tell grub where the zfs root is
zroot=\"zfs=$(findmnt -ln -o SOURCE ${MOUNTPOINT}) rw\"
sed -e '/^GRUB_CMDLINE_LINUX_DEFAULT=/s@\"\$@ '\"\${zroot}\"'\"@g' -e '/^GRUB_CMDLINE_LINUX=/s@\"\$@ '\"\${zroot}\"'\"@g' -i /etc/default/grub
sed -e '/GRUB_SAVEDEFAULT/ s/^#*/#/' -i /etc/default/grub
grub-install --target=x86_64-efi --efi-directory=${UEFI_MOUNT} --bootloader-id=${bootid} --recheck
pacman -S --noconfirm grub-theme-manjaro" > ${MOUNTPOINT}/usr/bin/grub_installer.sh
    else
        echo -e "# "'!'"/bin/bash
ln -s /hostlvm /run/lvm
pacman -S --noconfirm --needed grub efibootmgr dosfstools grub-btrfs
findmnt | awk '/^\/ / {print $3}' | grep -q btrfs && sed -e '/GRUB_SAVEDEFAULT/ s/^#*/#/' -i /etc/default/grub
lsblk -ino TYPE,MOUNTPOINT | grep " /$" | grep -q lvm && sed -e '/GRUB_SAVEDEFAULT/ s/^#*/#/' -i /etc/default/grub
grub-install --target=x86_64-efi --efi-directory=${UEFI_MOUNT} --bootloader-id=${bootid} --recheck
pacman -S --noconfirm grub-theme-manjaro" > ${MOUNTPOINT}/usr/bin/grub_installer.sh
    fi

    [[ -f ${MOUNTPOINT}/usr/bin/grub_installer.sh ]] && chmod a+x ${MOUNTPOINT}/usr/bin/grub_installer.sh

    # if the device is removable append removable to the grub-install
    if [[ "$(cat /sys/block/${root_device}/removable)" == 1 ]]; then
        sed -e '/^grub-install /s/$/ --removable/g' -i ${MOUNTPOINT}/usr/bin/grub_installer.sh
    fi
    # If the root is on btrfs-subvolume, amend grub installation
    if ! $(mount | awk '$3 == "/mnt" {print $0}' | grep btrfs | grep -qv subvolid=5) ; then
        sed -e 's/ grub-btrfs//g' -i ${MOUNTPOINT}/usr/bin/grub_installer.sh
    fi
    # If encryption used amend grub
    if [[ $(cat /tmp/.luks_dev) != "" ]]; then
        sed -i '/noconfirm grub-theme-manjaro/d' ${MOUNTPOINT}/usr/bin/grub_installer.sh
        echo "sed -i \"s~GRUB_CMDLINE_LINUX=.*~GRUB_CMDLINE_LINUX=\\\""$(cat /tmp/.luks_dev | awk '{print $1}')\\\"~g\"" /etc/default/grub" >> ${MOUNTPOINT}/usr/bin/grub_installer.sh && echo "adding kernel parameter $(cat /tmp/.luks_dev)"
        echo "pacman -S --noconfirm grub-theme-manjaro" >> ${MOUNTPOINT}/usr/bin/grub_installer.sh
    fi
    # If Full disk encryption is used, use a keyfile
    if $fde; then
        echo "Full disk encryption enabled"
        sed  -i '3a\grep -q "^GRUB_ENABLE_CRYPTODISK=y" /etc/default/grub || sed -i "s/#GRUB_ENABLE_CRYPTODISK=y/GRUB_ENABLE_CRYPTODISK=y/" /etc/default/grub' ${MOUNTPOINT}/usr/bin/grub_installer.sh
    fi
    #install grub
    arch_chroot "grub_installer.sh" 2>$ERR
    check_for_error "grub-install --target=x86_64-efi" $?
    umount /mnt/hostlvm
    rmdir /mnt/hostlvm
    # the grub_installer is no longer needed
    [[ -f ${MOUNTPOINT}/usr/bin/grub_installer.sh ]] && rm ${MOUNTPOINT}/usr/bin/grub_installer.sh

    # Ask if user wishes to set Grub as the default bootloader and act accordingly
    DIALOG " $_InstUefiBtTitle " --yesno "\n$_SetBootDefBody ${UEFI_MOUNT}/EFI/boot $_SetBootDefBody2\n " 0 0
    if [[ $? -eq 0 ]]; then
        arch_chroot "mkdir ${UEFI_MOUNT}/EFI/boot" 2>$ERR
        arch_chroot "cp -r ${UEFI_MOUNT}/EFI/manjaro/grubx64.efi ${UEFI_MOUNT}/EFI/boot/bootx64.efi" 2>$ERR
        check_for_error "Install GRUB" $?
        DIALOG " $_InstUefiBtTitle " --infobox "\nGrub $_SetDefDoneBody\n " 0 0
        sleep 2
    fi

}


install_refind() {
    DIALOG " $_InstUefiBtTitle " --yesno "\n$_InstRefindBody\n " 0 0 || return 0
    clear
    inst_needed refind
    inst_needed refind-drivers
    # Check if the volume is removable. If so, install all drivers
    root_name=$(mount | awk '/\/mnt / {print $1}' | sed s~/dev/mapper/~~g | sed s~/dev/~~g)
    root_device=$(lsblk -i | tac | sed -r 's/^[^[:alnum:]]+//' | sed -n -e "/$root_name/,/disk/p" | awk '/disk/ {print $1}')
    # Clean the configuration in case there is previous one because the configuration part is not idempotent
    [[ -e "/mnt/boot/refind_linux.conf" ]] && rm /mnt/boot/refind_linux.conf
    ## install refind
    if [[ "$(cat /sys/block/${root_device}/removable)" == 1 ]]; then
        refind-install --root /mnt --alldrivers --yes 2>$ERR
        check_for_error "refind-install --root /mnt --alldrivers --yes" $?
        # Remove autodetect hook
        sed -i -e '/^HOOKS=/s/\ autodetect//g' /mnt/etc/mkinitcpio.conf
    elif [[ $LUKS == 1 ]]; then
        refind-install --root /mnt --alldrivers --yes 2>$ERR
        check_for_error "refind-install --root /mnt --alldrivers --yes" $?
    else
        refind-install --root /mnt 2>$ERR
        check_for_error "refind-install --root /mnt" $?
    fi

    # If root is on exotic filesystem, add drivers
    rootfs=$(mount | awk '/\/mnt / {print $5}')
    case $rootfs in
        nilfs2|xfs|jfs) cp /usr/share/refind/drivers_x64/"$rootfs"_x64.efi ${MOUNTPOINT}${UEFI_MOUNT}/EFI/refind/drivers_x64/
            ;;
    esac
    # Mount as rw
    #sed -i 's/ro\ /rw\ \ /g' /mnt/boot/refind_linux.conf

    # Boot in graphics mode
    sed -i -e '/use_graphics_for/ s/^#*//' ${MOUNTPOINT}${UEFI_MOUNT}/EFI/refind/refind.conf
    # Set appropriate rootflags if installed on btrs subvolume
    if $(mount | awk '$3 == "/mnt" {print $0}' | grep btrfs | grep -qv subvolid=5) ; then
        rootflag="rootflags=$(mount | awk '$3 == "/mnt" {print $6}' | sed 's/^.*subvol=/subvol=/' | sed -e 's/,.*$/,/p' | sed 's/)//g')"
        sed -i "s|\"$|\ $rootflag\"|g" /mnt/boot/refind_linux.conf
    fi

    # LUKS and lvm with LUKS
    if [[ $LUKS == 1 ]]; then
        mapper_name="$(mount | awk '/\/mnt / {print $1}')"
        luks_opt=$(cat /tmp/.luks_dev)
        sed -i "s|root=.* |$luks_opt root=$mapper_name |g" /mnt/boot/refind_linux.conf
        sed -i '/Boot with minimal options/d' /mnt/boot/refind_linux.conf
    # Lvm without LUKS
    elif [[ $(lsblk -i | sed -r 's/^[^[:alnum:]]+//' | grep "/mnt$" | awk '{print $6}') == lvm ]]; then
        mapper_name="$(mount | awk '/\/mnt / {print $1}')"
        sed -i "s|root=.* |root=$mapper_name |g" /mnt/boot/refind_linux.conf
        sed -i '/Boot with minimal options/d' /mnt/boot/refind_linux.conf
    fi
    # Figure out microcode
    rootsubvol=$(findmnt -o TARGET,SOURCE | awk '/\/mnt / {print $2}' | grep -o "\[.*\]" | cut -d "[" -f2 | cut -d "]" -f1 | sed 's/^\///')
    UCODE=$(arch_chroot "pacman -Qqs ucode" 2>$ERR)
    if [[ $(echo ${UCODE} | wc -l) -gt 1 ]]; then
    # set microcode
        if findmnt -o TARGET,SOURCE | grep -q "/mnt/boot " ; then
            #there is a separate boot, path to microcode is at partition root
            sed -i "s|\"$| initrd=/intel-ucode.img initrd=/amd-ucode.img initrd=/initramfs-%v.img\"|g" /mnt/boot/refind_linux.conf
        elif [[ -n "$rootsubvol" ]]; then
            #Initramfs is on the root partition and root is on btrfs subvolume
            sed -i "s|\"$| initrd=$rootsubvol/boot/intel-ucode.img initrd=$rootsubvol/boot/amd-ucode.img initrd=$rootsubvol/boot/initramfs-%v.img\"|g" /mnt/boot/refind_linux.conf
        else
            #Initramfs is on the root partition
            sed -i "s|\"$| initrd=/boot/intel-ucode.img initrd=/boot/amd-ucode.img initrd=/boot/initramfs-%v.img\"|g" /mnt/boot/refind_linux.conf
        fi
    else
        if findmnt -o TARGET,SOURCE | grep -q "/mnt/boot " ; then
            #there is a separate boot, path to microcode is at partition root
            sed -i "s|\"$| initrd=/${UCODE}.img initrd=/initramfs-%v.img\"|g" /mnt/boot/refind_linux.conf
        elif [[ -n "$rootsubvol" ]]; then
            #Initramfs is on the root partition and root is on btrfs subvolume
            sed -i "s|\"$| initrd=$rootsubvol/boot/${UCODE}.img initrd=$rootsubvol/boot/initramfs-%v.img\"|g" /mnt/boot/refind_linux.conf
        else
            #Initramfs is on the root partition
            sed -i "s|\"$| initrd=/boot/${UCODE}.img initrd=/boot/initramfs-%v.img\"|g" /mnt/boot/refind_linux.conf
        fi
    fi

    basestrap ${MOUNTPOINT} refind-theme-maia
    DIALOG " $_InstUefiBtTitle " --infobox "\n$_RefindReady\n " 0 0
    sleep 2
}

install_systemd_boot() {
    DIALOG " $_InstUefiBtTitle " --yesno "\n$_InstSystdBBody\n " 0 0 || return 0
    clear

    arch_chroot "bootctl --esp-path=${UEFI_MOUNT} --boot-path=/boot install" 2>$ERR
    basestrap ${MOUNTPOINT} systemd-boot-manager
    arch_chroot "sdboot-manage gen" 2>$ERR
    check_for_error "systemd-boot" $?
    [[ $? -eq 0 ]] && touch /tmp/.newsystemdboot

    # Check if the volume is removable. If so, dont use autodetect
    root_name=$(mount | awk '/\/mnt / {print $1}' | sed s~/dev/mapper/~~g | sed s~/dev/~~g)
    root_device=$(lsblk -i | tac | sed -r 's/^[^[:alnum:]]+//' | sed -n -e "/$root_name/,/disk/p" | awk '/disk/ {print $1}')
    if [[ "$(cat /sys/block/${root_device}/removable)" == 1 ]]; then
        # Remove autodetect hook
        sed -i -e '/^HOOKS=/s/\ autodetect//g' /mnt/etc/mkinitcpio.conf
    fi
    DIALOG " $_InstUefiBtTitle " --infobox "\n$_SystdBReady\n " 0 0
    sleep 2
}


# Grub auto-detects installed kernels, etc. Syslinux does not, hence the extra code for it.
bios_bootloader() {
    DIALOG " $_InstBiosBtTitle " --menu "\n$_InstGrubBody\n " 0 0 2 \
      "grub" "" \
      "grub + os-prober" "" 2>${PACKAGES} || return 0
    clear

    # If something has been selected, act
    if [[ $(cat ${PACKAGES}) != "" ]]; then
        sed -i 's/+ \|\"//g' ${PACKAGES}
        #basestrap ${MOUNTPOINT} $(cat ${PACKAGES}) 2>$ERR
        check_for_error "$FUNCNAME" $? || return 1

        # If Grub, select device
        if [[ $(cat ${PACKAGES} | grep "grub") != "" ]]; then
            select_device
            # if root is encrypted, amend /etc/default/grub
            boot_encrypted_setting
            # If a device has been selected, configure
            if [[ $DEVICE != "" ]]; then
                # if /boot is LVM (whether using a seperate /boot mount or not), amend grub
                if ( [[ $LVM -eq 1 ]] && [[ $LVM_SEP_BOOT -eq 0 ]] ) || [[ $LVM_SEP_BOOT -eq 2 ]]; then
                    sed -i "s/GRUB_PRELOAD_MODULES=\"/GRUB_PRELOAD_MODULES=\"lvm /g" ${MOUNTPOINT}/etc/default/grub
                    sed -e '/GRUB_SAVEDEFAULT/ s/^#*/#/' -i ${MOUNTPOINT}/etc/default/grub
                fi

                # If root is on btrfs volume, amend grub
                [[ $(findmnt -no FSTYPE ${MOUNTPOINT}) == "btrfs" ]] && \
                  sed -e '/GRUB_SAVEDEFAULT/ s/^#*/#/' -i ${MOUNTPOINT}/etc/default/grub

                # Same setting is needed for LVM
                [[ LVM == 1 ]] && \
                  sed -e '/GRUB_SAVEDEFAULT/ s/^#*/#/' -i ${MOUNTPOINT}/etc/default/grub

                # grub config changes for zfs root
                if [ $(findmnt -ln -o FSTYPE ${MOUNTPOINT}) == "zfs" ]; then
                    # zfs needs ZPOOL_VDEV_NAME_PATH set to properly find the device
                    echo ZPOOL_VDEV_NAME_PATH=YES >> ${MOUNTPOINT}/etc/environment
                    export ZPOOL_VDEV_NAME_PATH=YES
                    # write this to a script so we can properly set ZPOOL_VDEV_NAME_PATH in the chroot
                    echo -e "# "'!'"/bin/bash
ln -s /hostlvm /run/lvm
export ZPOOL_VDEV_NAME_PATH=YES
pacman -S --noconfirm --needed grub os-prober
# zfs is considered a sparse filesystem so we can't use SAVEDEFAULT
sed -e '/GRUB_SAVEDEFAULT/ s/^#*/#/' -i /etc/default/grub
# we need to tell grub where the zfs root is
zroot=\"zfs=$(findmnt -ln -o SOURCE ${MOUNTPOINT}) rw\"
sed -e '/^GRUB_CMDLINE_LINUX_DEFAULT=/s@\"\$@ '\"\${zroot}\"'\"@g' -e '/^GRUB_CMDLINE_LINUX=/s@\"\$@ '\"\${zroot}\"'\"@g' -i /etc/default/grub
grub-install --target=i386-pc --recheck $DEVICE
pacman -S --noconfirm grub-theme-manjaro" > ${MOUNTPOINT}/usr/bin/grub_installer.sh
                else
                    echo -e "# "'!'"/bin/bash
ln -s /hostlvm /run/lvm
pacman -S --noconfirm --needed grub os-prober grub-btrfs
findmnt | awk '/^\/ / {print $3}' | grep -q btrfs && sed -e '/GRUB_SAVEDEFAULT/ s/^#*/#/' -i /etc/default/grub
grub-install --target=i386-pc --recheck $DEVICE
pacman -S --noconfirm grub-theme-manjaro" > ${MOUNTPOINT}/usr/bin/grub_installer.sh
                fi
                # If the root is on btrfs-subvolume, amend grub installation
                if ! $(mount | awk '$3 == "/mnt" {print $0}' | grep btrfs | grep -qv subvolid=5) ; then
                    sed -e 's/ grub-btrfs//g' -i ${MOUNTPOINT}/usr/bin/grub_installer.sh
                fi
                # If encryption used amend grub
                if [[ $(cat /tmp/.luks_dev) != "" ]]; then
                    sed -i '/noconfirm grub-theme-manjaro/d' ${MOUNTPOINT}/usr/bin/grub_installer.sh
                    echo "sed -i \"s~GRUB_CMDLINE_LINUX=.*~GRUB_CMDLINE_LINUX=\\\""$(cat /tmp/.luks_dev | awk '{print $1}')\\\"~g\"" /etc/default/grub" >> ${MOUNTPOINT}/usr/bin/grub_installer.sh && echo "adding kernel parameter $(cat /tmp/.luks_dev)"
                    echo "pacman -S --noconfirm grub-theme-manjaro" >> ${MOUNTPOINT}/usr/bin/grub_installer.sh
                fi
                # If Full disk encryption is used, use a keyfile
                if $fde; then
                    echo "Full disk encryption enabled"
                    sed  -i '3a\grep -q "^GRUB_ENABLE_CRYPTODISK=y" /etc/default/grub || sed -i "s/#GRUB_ENABLE_CRYPTODISK=y/GRUB_ENABLE_CRYPTODISK=y/" /etc/default/grub' ${MOUNTPOINT}/usr/bin/grub_installer.sh
                fi

                # Remove os-prober if not selected
                if ! cat ${PACKAGES} | grep -q os-prober ; then
                    sed -e 's/ os-prober//g' -i ${MOUNTPOINT}/usr/bin/grub_installer.sh
                fi
                [[ -f ${MOUNTPOINT}/usr/bin/grub_installer.sh ]] && chmod a+x ${MOUNTPOINT}/usr/bin/grub_installer.sh

                DIALOG " $_InstGrub " --infobox "\n$_PlsWaitBody\n " 0 0
                dd if=/dev/zero of=$DEVICE seek=1 count=2047
                mkdir /mnt/hostlvm
                mount --bind /run/lvm /mnt/hostlvm
                arch_chroot "grub_installer.sh" 2>$ERR
                check_for_error "grub-install --target=i386-pc" $?

                # the grub_installer is no longer needed - there still needs to be a better way to do this
                [[ -f ${MOUNTPOINT}/usr/bin/grub_installer.sh ]] && rm ${MOUNTPOINT}/usr/bin/grub_installer.sh

                #grub_mkconfig

                #basestrap ${MOUNTPOINT} grub-theme-manjaro 2>$ERR
                check_for_error "$FUNCNAME grub" $?
            fi
            umount /mnt/hostlvm
            rmdir /mnt/hostlvm
        else
            # Syslinux
            DIALOG " $_InstSysTitle " --menu "\n$_InstSysBody\n " 0 0 2 \
              "syslinux-install_update -iam" "[MBR]" "syslinux-install_update -i" "[/]" 2>${PACKAGES}

            # If an installation method has been chosen, run it
            if [[ $(cat ${PACKAGES}) != "" ]]; then
                arch_chroot "$(cat ${PACKAGES})" 2>$ERR
                check_for_error "syslinux-install" $?

                # Amend configuration file. First remove all existing entries, then input new ones.
                sed -i '/^LABEL.*$/,$d' ${MOUNTPOINT}/boot/syslinux/syslinux.cfg
                #echo -e "\n" >> ${MOUNTPOINT}/boot/syslinux/syslinux.cfg

                # First the "main" entries
                [[ -e ${MOUNTPOINT}/boot/initramfs-linux.img ]] && echo -e "\n\nLABEL arch\n\tMENU LABEL Manjaro Linux\n\tLINUX \
                  ../vmlinuz-linux\n\tAPPEND root=${ROOT_PART} rw\n\tINITRD ../initramfs-linux.img" >> ${MOUNTPOINT}/boot/syslinux/syslinux.cfg
                [[ -e ${MOUNTPOINT}/boot/initramfs-linux-grsec.img ]] && echo -e "\n\nLABEL arch\n\tMENU LABEL Manjaro Linux realtime\n\tLINUX \
                  ../vmlinuz-linux-grsec\n\tAPPEND root=${ROOT_PART} rw\n\tINITRD ../initramfs-linux-grsec.img" >> ${MOUNTPOINT}/boot/syslinux/syslinux.cfg
                [[ -e ${MOUNTPOINT}/boot/initramfs-linux-zen.img ]] && echo -e "\n\nLABEL arch\n\tMENU LABEL Manjaro Linux release candidate\n\tLINUX \
                  ../vmlinuz-linux-zen\n\tAPPEND root=${ROOT_PART} rw\n\tINITRD ../initramfs-linux-zen.img" >> ${MOUNTPOINT}/boot/syslinux/syslinux.cfg

                # Second the "fallback" entries
                [[ -e ${MOUNTPOINT}/boot/initramfs-linux.img ]] && echo -e "\n\nLABEL arch\n\tMENU LABEL Manjaro Linux Fallback\n\tLINUX \
                  ../vmlinuz-linux\n\tAPPEND root=${ROOT_PART} rw\n\tINITRD ../initramfs-linux-fallback.img" >> ${MOUNTPOINT}/boot/syslinux/syslinux.cfg
                [[ -e ${MOUNTPOINT}/boot/initramfs-linux-grsec.img ]] && echo -e "\n\nLABEL arch\n\tMENU LABEL Manjaro Linux Fallback realtime\n\tLINUX \
                  ../vmlinuz-linux-grsec\n\tAPPEND root=${ROOT_PART} rw\n\tINITRD ../initramfs-linux-grsec-fallback.img" \
                  >> ${MOUNTPOINT}/boot/syslinux/syslinux.cfg
                [[ -e ${MOUNTPOINT}/boot/initramfs-linux-zen.img ]] && echo -e "\n\nLABEL arch\n\tMENU LABEL Manjaro Linux Fallbacl Zen\n\tLINUX \
                  ../vmlinuz-linux-zen\n\tAPPEND root=${ROOT_PART} rw\n\tINITRD ../initramfs-linux-zen-fallback.img" >> ${MOUNTPOINT}/boot/syslinux/syslinux.cfg

                # Third, amend for LUKS
                [[ $LUKS_DEV != "" ]] && sed -i "s~rw~$LUKS_DEV rw~g" ${MOUNTPOINT}/boot/syslinux/syslinux.cfg

                # Finally, re-add the "default" entries
                echo -e "\n\nLABEL hdt\n\tMENU LABEL HDT (Hardware Detection Tool)\n\tCOM32 hdt.c32" >> ${MOUNTPOINT}/boot/syslinux/syslinux.cfg
                echo -e "\n\nLABEL reboot\n\tMENU LABEL Reboot\n\tCOM32 reboot.c32" >> ${MOUNTPOINT}/boot/syslinux/syslinux.cfg
                echo -e "\n\n#LABEL windows\n\t#MENU LABEL Windows\n\t#COM32 chain.c32\n\t#APPEND root=/dev/sda2 rw" \
                  >> ${MOUNTPOINT}/boot/syslinux/syslinux.cfg
                echo -e "\n\nLABEL poweroff\n\tMENU LABEL Poweroff\n\tCOM32 poweroff.c32" ${MOUNTPOINT}/boot/syslinux/syslinux.cfg
            fi
        fi
    fi
}

setup_luks_keyfile() {
    # Add keyfile to luks
    root_name=$(mount | awk '/\/mnt / {print $1}' | sed s~/dev/mapper/~~g | sed s~/dev/~~g)
    root_part=$(lsblk -i | tac | sed -r 's/^[^[:alnum:]]+//' | sed -n -e "/$root_name/,/part/p" | awk '/part/ {print $1}' | tr -cd '[:alnum:]')
    numberoflukskeys=$(cryptsetup luksDump /dev/"$root_part" | grep "ENABLED" | wc -l)
    if [[ "$numberoflukskeys" -lt 4 ]]; then
        # Create a keyfile
        [[ -e /mnt/crypto_keyfile.bin ]] || dd bs=512 count=4 if=/dev/urandom of=/mnt/crypto_keyfile.bin && echo "Generating a keyfile"
        chmod 000 /mnt/crypto_keyfile.bin
        echo "Adding the keyfile to the LUKS configuration"
        cryptsetup --pbkdf-force-iterations 200000 luksAddKey /dev/"$root_part" /mnt/crypto_keyfile.bin || echo "Something vent wrong with adding the LUKS key. Is /dev/$root_part the right partition?"
        # Add keyfile to initcpio
        grep -q '/crypto_keyfile.bin' /mnt/etc/mkinitcpio.conf || sed -i '/FILES/ s~)~/crypto_keyfile.bin)~' /mnt/etc/mkinitcpio.conf && echo "Adding keyfile to the initcpio"
        arch_chroot "mkinitcpio -P"
    fi
}

boot_encrypted_setting() {
    fde=false
    # Check if there is separate /boot partition
    if [[ $(lsblk | grep "/mnt/boot$") == "" ]]; then
        #There is no separate /boot parition
        root_name=$(mount | awk '/\/mnt / {print $1}' | sed s~/dev/mapper/~~g | sed s~/dev/~~g)
        # Check if root is encrypted
        if  [[ "$LUKS" == 1 ]]; then
            fde=true
            setup_luks_keyfile
        elif $(lsblk "/dev/mapper/$root_name" | grep -q 'crypt' ); then
            fde=true
            setup_luks_keyfile
        elif $(lsblk | grep "/mnt$" | grep -q 'crypt' ); then
            fde=true
            setup_luks_keyfile
        # Check if root is on encrypted lvm volume
        elif $(lsblk -i | tac | sed -r 's/^[^[:alnum:]]+//' | sed -n -e "/$root_name/,/disk/p" | awk '{print $6}' | grep -q crypt); then
            fde=true
            setup_luks_keyfile
        fi
    else
        # There is a separate /boot. Check if it is encrypted
        boot_name=$(mount | awk '/\/mnt\/boot / {print $1}' | sed s~/dev/mapper/~~g | sed s~/dev/~~g)
        if $(lsblk | grep '/mnt/boot' | grep -q 'crypt' ); then
            fde=true
            setup_luks_keyfile
        # Check if the /boot is inside encrypted lvm volume
        elif $(lsblk -i | tac | sed -r 's/^[^[:alnum:]]+//' | sed -n -e "/$boot_name/,/disk/p" | awk '{print $6}' | grep -q crypt); then
            fde=true
            setup_luks_keyfile
        elif $(lsblk "/dev/mapper/$boot_name" | grep -q 'crypt' ); then
            fde=true
            setup_luks_keyfile
        fi
    fi

}

recheck_luks() {
    # Check if there is separate encrypted /boot partition
    if $(lsblk | grep '/mnt/boot' | grep -q 'crypt' ); then
        LUKS=1
    # Check if root is encrypted and there is no separate /boot
    elif $(lsblk | grep "/mnt$" | grep -q 'crypt' ) && [[ $(lsblk | grep "/mnt/boot$") == "" ]]; then
        LUKS=1
    # Check if root is on encrypted lvm volume
    elif $(lsblk -i | tac | sed -r 's/^[^[:alnum:]]+//' | sed -n -e "/$root_name/,/disk/p" | awk '{print $6}' | grep -q crypt); then
        LUKS=1
    else
        true
    fi
}

# Function will not allow incorrect UUID type for installed system.
generate_fstab() {
    DIALOG " $_ConfBseFstab " --menu "\n$_FstabBody\n " 0 0 4 \
      "fstabgen -U -p" "$_FstabDevUUID" \
      "fstabgen -p" "$_FstabDevName" \
      "fstabgen -L -p" "$_FstabDevLabel" \
      "fstabgen -t PARTUUID -p" "$_FstabDevPtUUID" 2>${ANSWER}

    if [[ $(cat ${ANSWER}) != "" ]]; then
        if [[ $SYSTEM == "BIOS" ]] && [[ $(cat ${ANSWER}) == "fstabgen -t PARTUUID -p" ]]; then
            DIALOG " $_ErrTitle " --msgbox "\n$_FstabErr\n " 0 0
        else
            $(cat ${ANSWER}) ${MOUNTPOINT} > ${MOUNTPOINT}/etc/fstab 2>$ERR
            check_for_error "$FUNCNAME" $?
            [[ -f ${MOUNTPOINT}/swapfile ]] && sed -i "s/\\${MOUNTPOINT}//" ${MOUNTPOINT}/etc/fstab
        fi
    fi
    # Edit fstab in case of btrfs subvolumes
    sed -i "s/subvolid=.*,subvol=\/.*,//g" /mnt/etc/fstab

    # remove any zfs datasets that are mounted by zfs
    for MSOURCE in $(cat ${MOUNTPOINT}/etc/fstab | grep "^[a-z,A-Z]" | awk '{print $1}'); do
    if [ $(zfs list -H -o mountpoint,name | grep "^/"  | awk '{print $2}'   | grep "^${MSOURCE}$") ]; then
        sed -e "\|^${MSOURCE}[[:space:]]| s/^#*/#/" -i ${MOUNTPOINT}/etc/fstab
    fi
done
}

# locale array generation code adapted from the Manjaro 0.8 installer
set_locale() {
    LOCALES=""
    for i in $(cat /etc/locale.gen | grep -v "#  " | sed 's/#//g' | awk '/UTF-8/ {print $1}'); do
        LOCALES="${LOCALES} ${i} -"
    done

    # Set the system language
    DIALOG " $_ConfBseSysLang " --default-item "${CURR_LOCALE}" --menu "\n$_langBody\n " 0 0 12 ${LOCALES} 2>${ANSWER} || return 0

    LOCALE=$(cat ${ANSWER})
    echo "LANG=\"${LOCALE}\"" > ${MOUNTPOINT}/etc/locale.conf
    echo "LC_MESSAGES=\"${LOCALE}\"" >> ${MOUNTPOINT}/etc/locale.conf
    sed -i "s/#${LOCALE}/${LOCALE}/" ${MOUNTPOINT}/etc/locale.gen 2>$ERR
    # Set system measurements
    DIALOG " $_ConfBseSysLoc " --default-item "${LOCALE}" --menu "\n$_localeBody\n " 0 0 12 ${LOCALES} 2>${ANSWER} || return 0

    LOCALE2=$(cat ${ANSWER})
    echo "LC_MONETARY=\"${LOCALE2}\"" >> ${MOUNTPOINT}/etc/locale.conf
    echo "LC_PAPER=\"${LOCALE2}\"" >> ${MOUNTPOINT}/etc/locale.conf
    echo "LC_MEASUREMENT=\"${LOCALE2}\"" >> ${MOUNTPOINT}/etc/locale.conf
    echo "LC_ADDRESS=\"${LOCALE2}\"" >> ${MOUNTPOINT}/etc/locale.conf
    echo "LC_TIME=\"${LOCALE2}\"" >> ${MOUNTPOINT}/etc/locale.conf
    sed -i "s/#${LOCALE2}/${LOCALE2}/" ${MOUNTPOINT}/etc/locale.gen 2>$ERR

    # Generate locales
    arch_chroot "locale-gen" >/dev/null 2>$ERR &

    check_for_error "$FUNCNAME" "$?"
    ini linux.locale "$LOCALE"
}

# Set Zone and Sub-Zone
set_timezone() {
    ZONE=""
    for i in $(cat /usr/share/zoneinfo/zone.tab | awk '{print $3}' | grep "/" | sed "s/\/.*//g" | sort -ud); do
        ZONE="$ZONE ${i} -"
    done

    DIALOG " $_ConfBseTimeHC " --menu "\n$_TimeZBody\n " 0 0 10 ${ZONE} 2>${ANSWER} || return 1
    ZONE=$(cat ${ANSWER})

    SUBZONE=""
    for i in $(cat /usr/share/zoneinfo/zone.tab | awk '{print $3}' | grep "${ZONE}/" | sed "s/${ZONE}\///g" | sort -ud); do
        SUBZONE="$SUBZONE ${i} -"
    done

    DIALOG " $_ConfBseTimeHC " --menu "\n$_TimeSubZBody\n " 0 0 11 ${SUBZONE} 2>${ANSWER} || return 1
    SUBZONE=$(cat ${ANSWER})

    DIALOG " $_ConfBseTimeHC " --yesno "\n$_TimeZQ ${ZONE}/${SUBZONE}?\n " 0 0
    if (( $? == 0 )); then
        arch_chroot "ln -sf /usr/share/zoneinfo/${ZONE}/${SUBZONE} /etc/localtime" 2>$ERR
        check_for_error "$FUNCNAME ${ZONE}/${SUBZONE}" $?
        ini linux.zone "${ZONE}/${SUBZONE}"
    else
        return 1
    fi
}

set_hw_clock() {
    DIALOG " $_ConfBseTimeHC " --menu "\n$_HwCBody\n " 0 0 2 \
    "utc" "-" \
    "localtime" "-" 2>${ANSWER}

    if [[ $(cat ${ANSWER}) != "" ]]; then
        arch_chroot "hwclock --systohc --$(cat ${ANSWER})"  2>$ERR
        check_for_error "$FUNCNAME" "$?"
        ini linux.time "$ANSWER"
    fi
}

set_hostname() {
    DIALOG " $_ConfBseHost " --inputbox "\n$_HostNameBody\n " 0 0 "manjaro" 2>${ANSWER} || return 0

    echo "$(cat ${ANSWER})" > ${MOUNTPOINT}/etc/hostname 2>$ERR
    echo -e "#<ip-address>\t<hostname.domain.org>\t<hostname>\n127.0.0.1\tlocalhost.localdomain\tlocalhost\t$(cat \
      ${ANSWER})\n::1\tlocalhost.localdomain\tlocalhost\t$(cat ${ANSWER})" > ${MOUNTPOINT}/etc/hosts 2>$ERR
    check_for_error "$FUNCNAME"
    ini linux.hostname "$ANSWER"
}

# Adapted and simplified from the Manjaro 0.8 and Antergos 2.0 installers
set_root_password() {
    DIALOG " $_ConfUsrRoot " --clear --insecure --passwordbox "\n$_PassRtBody\n " 0 0 \
      2> ${ANSWER} || return 0
    PASSWD=$(cat ${ANSWER})

    DIALOG " $_ConfUsrRoot " --clear --insecure --passwordbox "\n$_PassReEntBody\n " 0 0 \
      2> ${ANSWER} || return 0
    PASSWD2=$(cat ${ANSWER})

    if [[ $PASSWD == $PASSWD2 ]]; then
        echo -e "${PASSWD}\n${PASSWD}" > /tmp/.passwd
        arch_chroot "passwd root" < /tmp/.passwd >/dev/null 2>$ERR
        check_for_error "$FUNCNAME" $?
        rm /tmp/.passwd
    else
        DIALOG " $_ErrTitle " --msgbox "\n$_PassErrBody\n " 0 0
        set_root_password
    fi
}

# Originally adapted from the Antergos 2.0 installer
create_new_user() {
    DIALOG " $_NUsrTitle " --inputbox "\n$_NUsrBody\n " 0 0 "" 2>${ANSWER} || return 0
    USER=$(cat ${ANSWER})

    # Loop while user name is blank, has spaces, or has capital letters in it.
    while [[ ${#USER} -eq 0 ]] || [[ $USER =~ \ |\' ]] || [[ $USER =~ [^a-z0-9\ ] ]]; do
        DIALOG " $_NUsrTitle " --inputbox "$_NUsrErrBody" 0 0 "" 2>${ANSWER} || return 0
        USER=$(cat ${ANSWER})
    done

    shell=""
    DIALOG " $_NUsrTitle " --radiolist "\n$_DefShell\n$_UseSpaceBar\n " 0 0 3 \
      "zsh" "-" on \
      "bash" "-" off \
      "fish" "-" off 2>/tmp/.shell
    shell_choice=$(cat /tmp/.shell)

    case ${shell_choice} in
        "zsh") [[ ! -e /mnt/etc/skel/.zshrc ]] && basestrap ${MOUNTPOINT} manjaro-zsh-config
            shell=/usr/bin/zsh
            ;;
        "fish") [[ ! -e /mnt/usr/bin/fish ]] && basestrap ${MOUNTPOINT} fish
            shell=/usr/bin/fish
            ;;
        "bash") shell=/bin/bash
            ;;
    esac
    check_for_error "default shell: [${shell}]"

    # Enter password. This step will only be reached where the loop has been skipped or broken.
    DIALOG " $_ConfUsrNew " --clear --insecure --passwordbox "\n$_PassNUsrBody $USER\n " 0 0 \
      2> ${ANSWER} || return 0
    PASSWD=$(cat ${ANSWER})

    DIALOG " $_ConfUsrNew " --clear --insecure --passwordbox "\n$_PassReEntBody\n " 0 0 \
      2> ${ANSWER} || return 0
    PASSWD2=$(cat ${ANSWER})

    # loop while passwords entered do not match.
    while [[ $PASSWD != $PASSWD2 ]]; do
        DIALOG " $_ErrTitle " --msgbox "\n$_PassErrBody\n " 0 0

        DIALOG " $_ConfUsrNew " --clear --insecure --passwordbox "\n$_PassNUsrBody $USER\n " 0 0 \
          2> ${ANSWER} || return 0
        PASSWD=$(cat ${ANSWER})

        DIALOG " $_ConfUsrNew " --clear --insecure --passwordbox "\n_PassReEntBody\n " 0 0 \
          2> ${ANSWER} || return 0
        PASSWD2=$(cat ${ANSWER})
    done

    # create new user. This step will only be reached where the password loop has been skipped or broken.
    DIALOG " $_ConfUsrNew " --infobox "\n$_NUsrSetBody\n " 0 0
    sleep 2

    local list=$(ini linux.users)
    [[ -n "$list" ]] && list="${list};"
    ini linux.users "${list}${USER}"
    list=$(ini linux.shells)
    [[ -n "$list" ]] && list="${list};"
    ini linux.shells "${list}${shell}"

    # Create the user, set password, then remove temporary password file
    arch_chroot "groupadd ${USER}"
    arch_chroot "useradd ${USER} -m -g ${USER} -G wheel,storage,power,network,video,audio,lp,sys,input -s $shell" 2>$ERR
    check_for_error "add user to groups" $?
    echo -e "${PASSWD}\n${PASSWD}" > /tmp/.passwd
    arch_chroot "passwd ${USER}" < /tmp/.passwd >/dev/null 2>$ERR
    check_for_error "create user pwd" $?
    rm /tmp/.passwd

    # Set up basic configuration files and permissions for user
    #arch_chroot "cp /etc/skel/.bashrc /home/${USER}"
    arch_chroot "chown -R ${USER}:${USER} /home/${USER}"
    [[ -e ${MOUNTPOINT}/etc/sudoers ]] && sed -i '/%wheel ALL=(ALL) ALL/s/^#//' ${MOUNTPOINT}/etc/sudoers
}