# !/bin/bash
#
# Architect Installation Framework (2016-2017)
#
# Written by Carl Duff and @mandog for Archlinux
# Heavily modified and re-written by @Chrysostomus to install Manjaro instead
# Contributors: @papajoker, @oberon and the Manjaro-Community.
#
# This program is free software, provided under the GNU General Public License
# as published by the Free Software Foundation. So feel free to copy, distribute,
# or modify it as you wish.

# scan and update btrfs devices
btrfs_scan(){
	btrfs device scan >/dev/null 2>&1
}

# mount btrfs for checks
mount_btrfs(){
	btrfs_scan
	BTRFSMP="$(mktemp -d /tmp/brtfsmp.XXXX)"
	mount ${PART} ${BTRFSMP}
}

# unmount btrfs after checks done
umount_btrfs(){
	umount ${BTRFSMP}
	rm -r ${BTRFSMP}
}

# Set BTRFS_DEVICES on detected btrfs devices
find_btrfs_raid_devices(){
	btrfs_scan
	if [[ "${DETECT_CREATE_FILESYSTEM}" = "no" && "${FSTYPE}" = "btrfs" ]]; then
		for i in $(btrfs filesystem show ${PART} | cut -d " " -f 11); do
			BTRFS_DEVICES="${BTRFS_DEVICES}#${i}"
		done
	fi
}

find_btrfs_raid_bootloader_devices(){
	btrfs_scan
	BTRFS_COUNT=1
	if [[ "$(${_BLKID} -p -i  ${bootdev} -o value -s TYPE)" = "btrfs" ]]; then
		BTRFS_DEVICES=""
		for i in $(btrfs filesystem show ${bootdev} | cut -d " " -f 11); do
			BTRFS_DEVICES="${BTRFS_DEVICES}#${i}"
			BTRFS_COUNT=$((${BTRFS_COUNT}+1))
		done
	fi
}

# find btrfs subvolume
find_btrfs_subvolume(){
	if [[ "${DETECT_CREATE_FILESYSTEM}" = "no" ]]; then
		# existing btrfs subvolumes
		mount_btrfs
		for i in $(btrfs subvolume list ${BTRFSMP} | cut -d " " -f 7); do
			echo ${i}
			[[ "${1}" ]] && echo ${1}
		done
		umount_btrfs
	fi
}

find_btrfs_bootloader_subvolume(){
	BTRFS_SUBVOLUME_COUNT=1
	if [[ "$(${_BLKID} -p -i ${bootdev} -o value -s TYPE)" = "btrfs" ]]; then
		BTRFS_SUBVOLUMES=""
		PART="${bootdev}"
		mount_btrfs
		for i in $(btrfs subvolume list ${BTRFSMP} | cut -d " " -f 7); do
			BTRFS_SUBVOLUMES="${BTRFS_SUBVOLUMES}#${i}"
			BTRFS_SUBVOLUME_COUNT=$((${BTRFS_COUNT}+1))
		done
		umount_btrfs
	fi
}

# subvolumes already in use
subvolumes_in_use(){
	SUBVOLUME_IN_USE=""
	for i in $(grep ${PART}[:#] /tmp/.parts); do
		if [[ "$(echo ${i} | grep ":btrfs:")" ]]; then
			SUBVOLUME_IN_USE="${SUBVOLUME_IN_USE} $(echo ${i} | cut -d: -f 9)"
		fi
	done
}

# ask for btrfs compress option
btrfs_compress(){
	BTRFS_COMPRESS="NONE"
	BTRFS_COMPRESSLEVELS="lzo - zlib -"
	if [[ "${BTRFS_SUBVOLUME}" = "NONE" ]]; then
		DIALOG --defaultno --yesno "Would you like to compress the data on ${PART}?" 0 0 && BTRFS_COMPRESS="compress"
	else
		DIALOG --defaultno --yesno "Would you like to compress the data on ${PART} subvolume=${BTRFS_SUBVOLUME}?" 0 0 && BTRFS_COMPRESS="compress"
	fi
	if [[ "${BTRFS_COMPRESS}" = "compress" ]]; then
		DIALOG --menu "Select the compression method you want to use" 21 50 9 ${BTRFS_COMPRESSLEVELS} 2>${ANSWER} || return 1
		BTRFS_COMPRESS="compress=$(cat ${ANSWER})"
	fi
}

# ask for btrfs ssd option
btrfs_ssd(){
	BTRFS_SSD="NONE"
	if [[ "${BTRFS_SUBVOLUME}" = "NONE" ]]; then
		DIALOG --defaultno --yesno "Would you like to optimize the data for ssd disk usage on ${PART}?" 0 0 && BTRFS_SSD="ssd"
	else
		DIALOG --defaultno --yesno "Would you like to optimize the data for ssd disk usage on ${PART} subvolume=${BTRFS_SUBVOLUME}?" 0 0 && BTRFS_SSD="ssd"
	fi
}

# values that are only needed for btrfs creation
clear_btrfs_values(){
	: >/tmp/.btrfs-devices
	LABEL_NAME=""
	FS_OPTIONS=""
	BTRFS_DEVICES=""
	BTRFS_LEVEL=""
}

# do not ask for btrfs filesystem creation, if already prepared for creation!
check_btrfs_filesystem_creation(){
	DETECT_CREATE_FILESYSTEM="no"
	SKIP_FILESYSTEM="no"
	SKIP_ASK_SUBVOLUME="no"
	for i in $(grep ${PART}[:#] /tmp/.parts); do
		if [[ "$(echo ${i} | grep ":btrfs:")" ]]; then
			FSTYPE="btrfs"
			SKIP_FILESYSTEM="yes"
			# check on filesystem creation, skip subvolume asking then!
			[[ "$(echo ${i} | cut -d: -f 4 | grep yes)" ]] && DETECT_CREATE_FILESYSTEM="yes"
			[[ "${DETECT_CREATE_FILESYSTEM}" = "yes" ]] && SKIP_ASK_SUBVOLUME="yes"
		fi
	done
}

# remove devices with no subvolume from list and generate raid device list
btrfs_parts(){
	if [[ -s /tmp/.btrfs-devices ]]; then
		BTRFS_DEVICES=""
		for i in $(cat /tmp/.btrfs-devices); do
			BTRFS_DEVICES="${BTRFS_DEVICES}#${i}"
			# remove device if no subvolume is used!
			[[ "${BTRFS_SUBVOLUME}" = "NONE"  ]] && PARTS="$(echo ${PARTS} | sed -e "s#${i}\ _##g")"
		done
	else
		[[ "${BTRFS_SUBVOLUME}" = "NONE"  ]] && PARTS="$(echo ${PARTS} | sed -e "s#${PART}\ _##g")"
	fi
}

# choose raid level to use on btrfs device
btrfs_raid_level(){
	BTRFS_RAIDLEVELS="NONE - raid0 - raid1 - raid10 - single -"
	BTRFS_RAID_FINISH=""
	BTRFS_LEVEL=""
	BTRFS_DEVICE="${PART}"
	: >/tmp/.btrfs-devices
	DIALOG --msgbox "BTRFS RAID OPTIONS:\n\nBTRFS has options to control the raid configuration for data and metadata.\nValid choices are raid0, raid1, raid10 and single.\nsingle means that no duplication of metadata is done, which may be desired when using hardware raid. raid10 requires at least 4 devices.\n\nIf you don't need this feature select NONE." 0 0
	while [[ "${BTRFS_RAID_FINISH}" != "DONE" ]]; do
		DIALOG --menu "Select the raid level you want to use" 21 50 9 ${BTRFS_RAIDLEVELS} 2>${ANSWER} || return 1
		BTRFS_LEVEL=$(cat ${ANSWER})
		if [[ "${BTRFS_LEVEL}" = "NONE" ]]; then
			echo "${BTRFS_DEVICE}" >>/tmp/.btrfs-devices
			break
		else
			# take selected device as 1st device, add additional devices in part below.
			select_btrfs_raid_devices
		fi
	done
}

# select btrfs raid devices
select_btrfs_raid_devices (){
	# show all devices with sizes
	# DIALOG --msgbox "DISKS:\n$(_getavaildisks)\n\nPARTITIONS:\n$(_getavailpartitions)" 0 0
	# select the second device to use, no missing option available!
	: >/tmp/.btrfs-devices
	BTRFS_PART="${BTRFS_DEVICE}"
	BTRFS_PARTS="${PARTS}"
	echo "${BTRFS_PART}" >>/tmp/.btrfs-devices
	BTRFS_PARTS="$(echo ${BTRFS_PARTS} | sed -e "s#${BTRFS_PART}\ _##g")"
	RAIDNUMBER=2
	DIALOG --menu "Select device ${RAIDNUMBER}" 21 50 13 ${BTRFS_PARTS} 2>${ANSWER} || return 1
	BTRFS_PART=$(cat ${ANSWER})
	echo "${BTRFS_PART}" >>/tmp/.btrfs-devices
	while [[ "${BTRFS_PART}" != "DONE" ]]; do
		BTRFS_DONE=""
		RAIDNUMBER=$((${RAIDNUMBER} + 1))
		# RAID10 need 4 devices!
		[[ "${RAIDNUMBER}" -ge 3 && ! "${BTRFS_LEVEL}" = "raid10" ]] && BTRFS_DONE="DONE _"
		[[ "${RAIDNUMBER}" -ge 5 && "${BTRFS_LEVEL}" = "raid10" ]] && BTRFS_DONE="DONE _"
		# clean loop from used partition and options
		BTRFS_PARTS="$(echo ${BTRFS_PARTS} | sed -e "s#${BTRFS_PART}\ _##g")"
		# add more devices
		DIALOG --menu "Select device ${RAIDNUMBER}" 21 50 13 ${BTRFS_PARTS} ${BTRFS_DONE} 2>${ANSWER} || return 1
		BTRFS_PART=$(cat ${ANSWER})
		[[ "${BTRFS_PART}" = "DONE" ]] && break
		echo "${BTRFS_PART}" >>/tmp/.btrfs-devices
	done
	# final step ask if everything is ok?
	DIALOG --yesno "Would you like to create btrfs raid like this?\n\nLEVEL:\n${BTRFS_LEVEL}\n\nDEVICES:\n$(for i in $(cat /tmp/.btrfs-devices); do echo "${i}\n"; done)" 0 0 && BTRFS_RAID_FINISH="DONE"
}

# prepare new btrfs device
prepare_btrfs(){
	btrfs_raid_level || return 1
	prepare_btrfs_subvolume || return 1
}

# prepare btrfs subvolume
prepare_btrfs_subvolume(){
	DOSUBVOLUME="no"
	BTRFS_SUBVOLUME="NONE"
	if [[ "${SKIP_ASK_SUBVOLUME}" = "no" ]]; then
		DIALOG --defaultno --yesno "Would you like to create a new subvolume on ${PART}?" 0 0 && DOSUBVOLUME="yes"
	else
		DOSUBVOLUME="yes"
	fi
	if [[ "${DOSUBVOLUME}" = "yes" ]]; then
		BTRFS_SUBVOLUME="NONE"
		while [[ "${BTRFS_SUBVOLUME}" = "NONE" ]]; do
			DIALOG --inputbox "Enter the SUBVOLUME name for the device, keep it short\nand use no spaces or special\ncharacters." 10 65 2>${ANSWER} || return 1
			BTRFS_SUBVOLUME=$(cat ${ANSWER})
			check_btrfs_subvolume
		done
	else
		BTRFS_SUBVOLUME="NONE"
	fi
}

# check btrfs subvolume
check_btrfs_subvolume(){
	[[ "${DOMKFS}" = "yes" && "${FSTYPE}" = "btrfs" ]] && DETECT_CREATE_FILESYSTEM="yes"
	if [[ "${DETECT_CREATE_FILESYSTEM}" = "no" ]]; then
		mount_btrfs
		for i in $(btrfs subvolume list ${BTRFSMP} | cut -d " " -f 7); do
			if [[ "$(echo ${i} | grep "${BTRFS_SUBVOLUME}"$)" ]]; then
				DIALOG --msgbox "ERROR: You have defined 2 identical SUBVOLUME names or an empty name! Please enter another name." 8 65
				BTRFS_SUBVOLUME="NONE"
			fi
		done
		umount_btrfs
	else
		subvolumes_in_use
		if [[ "$(echo ${SUBVOLUME_IN_USE} | egrep "${BTRFS_SUBVOLUME}")" ]]; then
			DIALOG --msgbox "ERROR: You have defined 2 identical SUBVOLUME names or an empty name! Please enter another name." 8 65
			BTRFS_SUBVOLUME="NONE"
		fi
	fi
}

# create btrfs subvolume
create_btrfs_subvolume(){
	mount_btrfs
	btrfs subvolume create ${BTRFSMP}/${_btrfssubvolume} >${LOG}
	# change permission from 700 to 755
	# to avoid warnings during package installation
	chmod 755 ${BTRFSMP}/${_btrfssubvolume}
	umount_btrfs
}

# choose btrfs subvolume from list
choose_btrfs_subvolume (){
	BTRFS_SUBVOLUME="NONE"
	SUBVOLUMES_DETECTED="no"
	SUBVOLUMES=$(find_btrfs_subvolume _)
	# check if subvolumes are present
	[[ -n "${SUBVOLUMES}" ]] && SUBVOLUMES_DETECTED="yes"
	subvolumes_in_use
	for i in ${SUBVOLUME_IN_USE}; do
		SUBVOLUMES=$(echo ${SUBVOLUMES} | sed -e "s#${i}\ _##g")
	done
	if [[ -n "${SUBVOLUMES}" ]]; then
		DIALOG --menu "Select the subvolume to mount" 21 50 13 ${SUBVOLUMES} 2>${ANSWER} || return 1
		BTRFS_SUBVOLUME=$(cat ${ANSWER})
	else
		if [[ "${SUBVOLUMES_DETECTED}" = "yes" ]]; then
			DIALOG --msgbox "ERROR: All subvolumes of the device are already in use. Switching to create a new one now." 8 65
			SKIP_ASK_SUBVOLUME=yes
			prepare_btrfs_subvolume || return 1
		fi
	fi
}

# boot on btrfs subvolume is not supported
check_btrfs_boot_subvolume(){
	if [[ "${MP}" = "/boot" && "${FSTYPE}" = "btrfs" && ! "${BTRFS_SUBVOLUME}" = "NONE" ]]; then
		DIALOG --msgbox "ERROR: \n/boot on a btrfs subvolume is not supported by any bootloader yet!" 8 65
		FILESYSTEM_FINISH="no"
	fi
}

# btrfs subvolume menu
btrfs_subvolume(){
	FILESYSTEM_FINISH=""
	if [[ "${FSTYPE}" = "btrfs" && "${DOMKFS}" = "no" ]]; then
		if [[ "${ASK_MOUNTPOINTS}" = "1" ]]; then
			# create subvolume if requested
			# choose btrfs subvolume if present
			prepare_btrfs_subvolume || return 1
			if [[ "${BTRFS_SUBVOLUME}" = "NONE" ]]; then
				choose_btrfs_subvolume || return 1
			fi
		else
			# use device if no subvolume is present
			choose_btrfs_subvolume || return 1
		fi
		btrfs_compress
		btrfs_ssd
	fi
	FILESYSTEM_FINISH="yes"
}

select_filesystem(){
	FILESYSTEM_FINISH=""
	# don't allow vfat as / filesystem, it will not work!
	# don't allow ntfs as / filesystem, this is stupid!
	FSOPTS=""
	[[ "$(which mkfs.ext2 2>/dev/null)" ]] && FSOPTS="${FSOPTS} ext2 Ext2"
	[[ "$(which mkfs.ext3 2>/dev/null)" ]] && FSOPTS="${FSOPTS} ext3 Ext3"
	[[ "$(which mkfs.ext4 2>/dev/null)" ]] && FSOPTS="${FSOPTS} ext4 Ext4"
	[[ "$(which mkfs.btrfs 2>/dev/null)" ]] && FSOPTS="${FSOPTS} btrfs Btrfs-(Experimental)"
	[[ "$(which mkfs.nilfs2 2>/dev/null)" ]] && FSOPTS="${FSOPTS} nilfs2 Nilfs2-(Experimental)"
	[[ "$(which mkreiserfs 2>/dev/null)" ]] && FSOPTS="${FSOPTS} reiserfs Reiser3"
	[[ "$(which mkfs.xfs 2>/dev/null)" ]] && FSOPTS="${FSOPTS} xfs XFS"
	[[ "$(which mkfs.jfs 2>/dev/null)" ]] && FSOPTS="${FSOPTS} jfs JFS"
	[[ "$(which mkfs.ntfs 2>/dev/null)" && "${DO_ROOT}" = "DONE" ]] && FSOPTS="${FSOPTS} ntfs-3g NTFS"
	[[ "$(which mkfs.vfat 2>/dev/null)" && "${DO_ROOT}" = "DONE" ]] && FSOPTS="${FSOPTS} vfat VFAT"
	DIALOG --menu "Select a filesystem for ${PART}" 21 50 13 ${FSOPTS} 2>${ANSWER} || return 1
	FSTYPE=$(cat ${ANSWER})
}

enter_mountpoint(){
	FILESYSTEM_FINISH=""
	MP=""
	while [[ "${MP}" = "" ]]; do
		DIALOG --inputbox "Enter the mountpoint for ${PART}" 8 65 "/boot" 2>${ANSWER} || return 1
		MP=$(cat ${ANSWER})
		if grep ":${MP}:" /tmp/.parts; then
			DIALOG --msgbox "ERROR: You have defined 2 identical mountpoints! Please select another mountpoint." 8 65
			MP=""
		fi
	done
}

# set sane values for paramaters, if not already set
check_mkfs_values(){
	# Set values, to not confuse mkfs call!
	[[ "${FS_OPTIONS}" = "" ]] && FS_OPTIONS="NONE"
	[[ "${BTRFS_DEVICES}" = "" ]] && BTRFS_DEVICES="NONE"
	[[ "${BTRFS_LEVEL}" = "" ]] && BTRFS_LEVEL="NONE"
	[[ "${BTRFS_SUBVOLUME}" = "" ]] && BTRFS_SUBVOLUME="NONE"
	[[ "${DOSUBVOLUME}" = "" ]] && DOSUBVOLUME="no"
	[[ "${LABEL_NAME}" = "" && -n "$(${_BLKID} -p -i -o value -s LABEL ${PART})" ]] && LABEL_NAME="$(${_BLKID} -p -i -o value -s LABEL ${PART})"
	[[ "${LABEL_NAME}" = "" ]] && LABEL_NAME="NONE"
}

create_filesystem(){
	FILESYSTEM_FINISH=""
	LABEL_NAME=""
	FS_OPTIONS=""
	BTRFS_DEVICES=""
	BTRFS_LEVEL=""
	DIALOG --yesno "Would you like to create a filesystem on ${PART}?\n\n(This will overwrite existing data!)" 0 0 && DOMKFS="yes"
	if [[ "${DOMKFS}" = "yes" ]]; then
		while [[ "${LABEL_NAME}" = "" ]]; do
			DIALOG --inputbox "Enter the LABEL name for the device, keep it short\n(not more than 12 characters) and use no spaces or special\ncharacters." 10 65 \
			"$(${_BLKID} -p -i -o value -s LABEL ${PART})" 2>${ANSWER} || return 1
			LABEL_NAME=$(cat ${ANSWER})
			if grep ":${LABEL_NAME}$" /tmp/.parts; then
				DIALOG --msgbox "ERROR: You have defined 2 identical LABEL names! Please enter another name." 8 65
				LABEL_NAME=""
			fi
		done
		if [[ "${FSTYPE}" = "btrfs" ]]; then
			prepare_btrfs || return 1
			btrfs_compress
			btrfs_ssd
		fi
		DIALOG --inputbox "Enter additional options to the filesystem creation utility.\nUse this field only, if the defaults are not matching your needs,\nelse just leave it empty." 10 70  2>${ANSWER} || return 1
		FS_OPTIONS=$(cat ${ANSWER})
	fi
	FILESYSTEM_FINISH="yes"
}

mountpoints(){
	NAME_SCHEME_PARAMETER_RUN=""
	while [[ "${PARTFINISH}" != "DONE" ]]; do
		activate_special_devices
		: >/tmp/.device-names
		: >/tmp/.fstab
		: >/tmp/.parts
		#
		# Select mountpoints
		#
		DIALOG --msgbox "Available partitions:\n\n$(_getavailpartitions)\n" 0 0
		PARTS=$(findpartitions _)
		DO_SWAP=""
		while [[ "${DO_SWAP}" != "DONE" ]]; do
			FSTYPE="swap"
			DIALOG --menu "Select the partition to use as swap" 21 50 13 NONE - ${PARTS} 2>${ANSWER} || return 1
			PART=$(cat ${ANSWER})
			if [[ "${PART}" != "NONE" ]]; then
				DOMKFS="no"
				if [[ "${ASK_MOUNTPOINTS}" = "1" ]]; then
					create_filesystem
				else
					FILESYSTEM_FINISH="yes"
				fi
			else
				FILESYSTEM_FINISH="yes"
			fi
			[[ "${FILESYSTEM_FINISH}" = "yes" ]] && DO_SWAP=DONE
		done
		check_mkfs_values
		if [[ "${PART}" != "NONE" ]]; then
			PARTS="$(echo ${PARTS} | sed -e "s#${PART}\ _##g")"
			echo "${PART}:swap:swap:${DOMKFS}:${LABEL_NAME}:${FS_OPTIONS}:${BTRFS_DEVICES}:${BTRFS_LEVEL}:${BTRFS_SUBVOLUME}:${DOSUBVOLUME}:${BTRFS_COMPRESS}:${BTRFS_SSD}" >>/tmp/.parts
		fi
		DO_ROOT=""
		while [[ "${DO_ROOT}" != "DONE" ]]; do
			DIALOG --menu "Select the partition to mount as /" 21 50 13 ${PARTS} 2>${ANSWER} || return 1
			PART=$(cat ${ANSWER})
			PART_ROOT=${PART}
			# Select root filesystem type
			FSTYPE="$(${_BLKID} -p -i -o value -s TYPE ${PART})"
			DOMKFS="no"
			# clear values first!
			clear_btrfs_values
			check_btrfs_filesystem_creation
			if [[ "${ASK_MOUNTPOINTS}" = "1" && "${SKIP_FILESYSTEM}" = "no" ]]; then
				select_filesystem && create_filesystem && btrfs_subvolume
			else
				btrfs_subvolume
			fi
			[[ "${FILESYSTEM_FINISH}" = "yes" ]] && DO_ROOT=DONE
		done
		find_btrfs_raid_devices
		btrfs_parts
		check_mkfs_values
		echo "${PART}:${FSTYPE}:/:${DOMKFS}:${LABEL_NAME}:${FS_OPTIONS}:${BTRFS_DEVICES}:${BTRFS_LEVEL}:${BTRFS_SUBVOLUME}:${DOSUBVOLUME}:${BTRFS_COMPRESS}:${BTRFS_SSD}" >>/tmp/.parts
		! [[ "${FSTYPE}" = "btrfs" ]] && PARTS="$(echo ${PARTS} | sed -e "s#${PART}\ _##g")"
		#
		# Additional partitions
		#
		while [[ "${PART}" != "DONE" ]]; do
			DO_ADDITIONAL=""
			while [[ "${DO_ADDITIONAL}" != "DONE" ]]; do
				DIALOG --menu "Select any additional partitions to mount under your new root (select DONE when finished)" 21 52 13 ${PARTS} DONE _ 2>${ANSWER} || return 1
				PART=$(cat ${ANSWER})
				if [[ "${PART}" != "DONE" ]]; then
					FSTYPE="$(${_BLKID} -p -i  -o value -s TYPE ${PART})"
					DOMKFS="no"
					# clear values first!
					clear_btrfs_values
					check_btrfs_filesystem_creation
					# Select a filesystem type
					if [[ "${ASK_MOUNTPOINTS}" = "1" && "${SKIP_FILESYSTEM}" = "no" ]]; then
						enter_mountpoint && select_filesystem && create_filesystem && btrfs_subvolume
					else
						enter_mountpoint
						btrfs_subvolume
					fi
					check_btrfs_boot_subvolume
				else
					FILESYSTEM_FINISH="yes"
				fi
				[[ "${FILESYSTEM_FINISH}" = "yes" ]] && DO_ADDITIONAL="DONE"
			done
			if [[ "${PART}" != "DONE" ]]; then
				find_btrfs_raid_devices
				btrfs_parts
				check_mkfs_values
				echo "${PART}:${FSTYPE}:${MP}:${DOMKFS}:${LABEL_NAME}:${FS_OPTIONS}:${BTRFS_DEVICES}:${BTRFS_LEVEL}:${BTRFS_SUBVOLUME}:${DOSUBVOLUME}:${BTRFS_COMPRESS}:${BTRFS_SSD}" >>/tmp/.parts
				! [[ "${FSTYPE}" = "btrfs" ]] && PARTS="$(echo ${PARTS} | sed -e "s#${PART}\ _##g")"
			fi
		done
		DIALOG --yesno "Would you like to create and mount the filesytems like this?\n\nSyntax\n------\nDEVICE:TYPE:MOUNTPOINT:FORMAT:LABEL:FSOPTIONS:BTRFS_DETAILS\n\n$(for i in $(cat /tmp/.parts | sed -e 's, ,#,g'); do echo "${i}\n";done)" 0 0 && PARTFINISH="DONE"
	done
	# disable swap and all mounted partitions
	_umountall
	if [[ "${NAME_SCHEME_PARAMETER_RUN}" = "" ]]; then
		set_device_name_scheme || return 1
	fi
	printk off
	for line in $(cat /tmp/.parts); do
		PART=$(echo ${line} | cut -d: -f 1)
		FSTYPE=$(echo ${line} | cut -d: -f 2)
		MP=$(echo ${line} | cut -d: -f 3)
		DOMKFS=$(echo ${line} | cut -d: -f 4)
		LABEL_NAME=$(echo ${line} | cut -d: -f 5)
		FS_OPTIONS=$(echo ${line} | cut -d: -f 6)
		BTRFS_DEVICES=$(echo ${line} | cut -d: -f 7)
		BTRFS_LEVEL=$(echo ${line} | cut -d: -f 8)
		BTRFS_SUBVOLUME=$(echo ${line} | cut -d: -f 9)
		DOSUBVOLUME=$(echo ${line} | cut -d: -f 10)
		BTRFS_COMPRESS=$(echo ${line} | cut -d: -f 11)
		BTRFS_SSD=$(echo ${line} | cut -d: -f 12)
		if [[ "${DOMKFS}" = "yes" ]]; then
			if [[ "${FSTYPE}" = "swap" ]]; then
				DIALOG --infobox "Creating and activating swapspace on ${PART}" 0 0
			else
				DIALOG --infobox "Creating ${FSTYPE} on ${PART},\nmounting to ${DESTDIR}${MP}" 0 0
			fi
			_mkfs yes ${PART} ${FSTYPE} ${DESTDIR} ${MP} ${LABEL_NAME} ${FS_OPTIONS} ${BTRFS_DEVICES} ${BTRFS_LEVEL} ${BTRFS_SUBVOLUME} ${DOSUBVOLUME} ${BTRFS_COMPRESS} ${BTRFS_SSD} || return 1
		else
			if [[ "${FSTYPE}" = "swap" ]]; then
				DIALOG --infobox "Activating swapspace on ${PART}" 0 0
			else
				DIALOG --infobox "Mounting ${FSTYPE} on ${PART} to ${DESTDIR}${MP}" 0 0
			fi
			_mkfs no ${PART} ${FSTYPE} ${DESTDIR} ${MP} ${LABEL_NAME} ${FS_OPTIONS} ${BTRFS_DEVICES} ${BTRFS_LEVEL} ${BTRFS_SUBVOLUME} ${DOSUBVOLUME} ${BTRFS_COMPRESS} ${BTRFS_SSD} || return 1
		fi
		sleep 1
	done
	printk on
	DIALOG --msgbox "Partitions were successfully mounted." 0 0
	NEXTITEM="5"
	S_MKFS=1
}

# _mkfs()
# Create and mount filesystems in our destination system directory.
#
# args:
#  domk: Whether to make the filesystem or use what is already there
#  device: Device filesystem is on
#  fstype: type of filesystem located at the device (or what to create)
#  dest: Mounting location for the destination system
#  mountpoint: Mount point inside the destination system, e.g. '/boot'

# returns: 1 on failure
_mkfs(){
	local _domk=${1}
	local _device=${2}
	local _fstype=${3}
	local _dest=${4}
	local _mountpoint=${5}
	local _labelname=${6}
	local _fsoptions=${7}
	local _btrfsdevices="$(echo ${8} | sed -e 's|#| |g')"
	local _btrfslevel=${9}
	local _btrfssubvolume=${10}
	local _dosubvolume=${11}
	local _btrfscompress=${12}
	local _btrfsssd=${13}
	# correct empty entries
	[[ "${_fsoptions}" = "NONE" ]] && _fsoptions=""
	[[ "${_btrfsssd}" = "NONE" ]] && _btrfsssd=""
	[[ "${_btrfscompress}" = "NONE" ]] && _btrfscompress=""
	[[ "${_btrfssubvolume}" = "NONE" ]] && _btrfssubvolume=""
	# add btrfs raid level, if needed
	[[ ! "${_btrfslevel}" = "NONE" && "${_fstype}" = "btrfs" ]] && _fsoptions="${_fsoptions} -d ${_btrfslevel}"
	# we have two main cases: "swap" and everything else.
	if [[ "${_fstype}" = "swap" ]]; then
		swapoff ${_device} >/dev/null 2>&1
		if [[ "${_domk}" = "yes" ]]; then
			mkswap -L ${_labelname} ${_device} >${LOG} 2>&1
			if [[ $? != 0 ]]; then
				DIALOG --msgbox "Error creating swap: mkswap ${_device}" 0 0
				return 1
			fi
		fi
		swapon ${_device} >${LOG} 2>&1
		if [[ $? != 0 ]]; then
			DIALOG --msgbox "Error activating swap: swapon ${_device}" 0 0
			return 1
		fi
	else
		# make sure the fstype is one we can handle
		local knownfs=0
		for fs in xfs jfs reiserfs ext2 ext3 ext4 btrfs nilfs2 ntfs-3g vfat; do
			[[ "${_fstype}" = "${fs}" ]] && knownfs=1 && break
		done
		if [[ ${knownfs} -eq 0 ]]; then
			DIALOG --msgbox "unknown fstype ${_fstype} for ${_device}" 0 0
			return 1
		fi
		# if we were tasked to create the filesystem, do so
		if [[ "${_domk}" = "yes" ]]; then
			local ret
			case ${_fstype} in
				xfs) mkfs.xfs ${_fsoptions} -L ${_labelname} -f ${_device} >${LOG} 2>&1; ret=$? ;;
				jfs) yes | mkfs.jfs ${_fsoptions} -L ${_labelname} ${_device} >${LOG} 2>&1; ret=$? ;;
				reiserfs) yes | mkreiserfs ${_fsoptions} -l ${_labelname} ${_device} >${LOG} 2>&1; ret=$? ;;
				ext2) mkfs.ext2 ${_fsoptions} -F -L ${_labelname} ${_device} >${LOG} 2>&1; ret=$? ;;
				ext3) mke2fs ${_fsoptions} -F -L ${_labelname} -t ext3 ${_device} >${LOG} 2>&1; ret=$? ;;
				ext4) mke2fs ${_fsoptions} -F -L ${_labelname} -t ext4 ${_device} >${LOG} 2>&1; ret=$? ;;
				btrfs) mkfs.btrfs ${_fsoptions} -L ${_labelname} ${_btrfsdevices} >${LOG} 2>&1; ret=$? ;;
				nilfs2) mkfs.nilfs2 ${_fsoptions} -L ${_labelname} ${_device} >${LOG} 2>&1; ret=$? ;;
				ntfs-3g) mkfs.ntfs ${_fsoptions} -L ${_labelname} ${_device} >${LOG} 2>&1; ret=$? ;;
				vfat) mkfs.vfat ${_fsoptions} -n ${_labelname} ${_device} >${LOG} 2>&1; ret=$? ;;
				# don't handle anything else here, we will error later
			esac
			if [[ ${ret} != 0 ]]; then
				DIALOG --msgbox "Error creating filesystem ${_fstype} on ${_device}" 0 0
				return 1
			fi
			sleep 2
		fi
		if [[ "${_fstype}" = "btrfs" && -n "${_btrfssubvolume}" && "${_dosubvolume}" = "yes" ]]; then
			create_btrfs_subvolume
		fi
		btrfs_scan
		sleep 2
		# create our mount directory
		mkdir -p ${_dest}${_mountpoint}
		# prepare btrfs mount options
		_btrfsmountoptions=""
		[[ -n "${_btrfssubvolume}" ]] && _btrfsmountoptions="subvol=${_btrfssubvolume}"
		[[ -n "${_btrfscompress}" ]] && _btrfsmountoptions="${_btrfsmountoptions} ${_btrfscompress}"
		[[ -n "${_btrfsssd}" ]] && _btrfsmountoptions="${_btrfsmountoptions} ${_btrfsssd}"
		_btrfsmountoptions="$(echo ${_btrfsmountoptions} | sed -e 's#^ ##g' | sed -e 's# #,#g')"
		# mount the bad boy
		if [[ "${_fstype}" = "btrfs" && -n "${_btrfsmountoptions}" ]]; then
			mount -t ${_fstype} -o ${_btrfsmountoptions} ${_device} ${_dest}${_mountpoint} >${LOG} 2>&1
		else
			mount -t ${_fstype} ${_device} ${_dest}${_mountpoint} >${LOG} 2>&1
		fi
		if [[ $? != 0 ]]; then
			DIALOG --msgbox "Error mounting ${_dest}${_mountpoint}" 0 0
			return 1
		fi
		# change permission of base directories to correct permission
		# to avoid btrfs issues
		if [[ "${_mountpoint}" = "/tmp" ]]; then
			chmod 1777 ${_dest}${_mountpoint}
		elif [[ "${_mountpoint}" = "/root" ]]; then
			chmod 750 ${_dest}${_mountpoint}
		else
			chmod 755 ${_dest}${_mountpoint}
		fi
	fi
	# add to .device-names for config files
	local _fsuuid="$(getfsuuid ${_device})"
	local _fslabel="$(getfslabel ${_device})"

	if [[ "${GUID_DETECTED}" == "1" ]]; then
		local _partuuid="$(getpartuuid ${_device})"
		local _partlabel="$(getpartlabel ${_device})"

		echo "# DEVICE DETAILS: ${_device} PARTUUID=${_partuuid} PARTLABEL=${_partlabel} UUID=${_fsuuid} LABEL=${_fslabel}" >> /tmp/.device-names
	else
		echo "# DEVICE DETAILS: ${_device} UUID=${_fsuuid} LABEL=${_fslabel}" >> /tmp/.device-names
	fi

	# add to temp fstab
	if [[ "${NAME_SCHEME_PARAMETER}" == "FSUUID" ]]; then
		if [[ -n "${_fsuuid}" ]]; then
			_device="UUID=${_fsuuid}"
		fi
	elif [[ "${NAME_SCHEME_PARAMETER}" == "FSLABEL" ]]; then
		if [[ -n "${_fslabel}" ]]; then
			_device="LABEL=${_fslabel}"
		fi
	else
		if [[ "${GUID_DETECTED}" == "1" ]]; then
		if [[ "${NAME_SCHEME_PARAMETER}" == "PARTUUID" ]]; then
			if [[ -n "${_partuuid}" ]]; then
				_device="PARTUUID=${_partuuid}"
			fi
		elif [[ "${NAME_SCHEME_PARAMETER}" == "PARTLABEL" ]]; then
			if [[ -n "${_partlabel}" ]]; then
				_device="PARTLABEL=${_partlabel}"
			fi
		fi
		fi
	fi

	if [[ "${_fstype}" = "btrfs" && -n "${_btrfsmountoptions}" ]]; then
		echo -n "${_device} ${_mountpoint} ${_fstype} defaults,${_btrfsmountoptions} 0 " >>/tmp/.fstab
	else
		echo -n "${_device} ${_mountpoint} ${_fstype} defaults 0 " >>/tmp/.fstab
	fi
	if [[ "${_fstype}" = "swap" ]]; then
		echo "0" >>/tmp/.fstab
	else
		echo "1" >>/tmp/.fstab
	fi
}

# auto_fstab()
# preprocess fstab file
# comments out old fields and inserts new ones
# according to partitioning/formatting stage
#
auto_fstab(){
	# Modify fstab
	if [[ "${S_MKFS}" = "1" || "${S_MKFSAUTO}" = "1" ]]; then
		if [[ -f /tmp/.device-names ]]; then
			sort /tmp/.device-names >>${DESTDIR}/etc/fstab
		fi
		if [[ -f /tmp/.fstab ]]; then
			# clean fstab first from /dev entries
			sed -i -e '/^\/dev/d' ${DESTDIR}/etc/fstab
			sort /tmp/.fstab >>${DESTDIR}/etc/fstab
		fi
	fi
}

# check for btrfs bootpart and abort if detected
abort_btrfs_bootpart(){
	FSTYPE="$(${_BLKID} -p -i ${bootdev} -o value -s TYPE)"
	if [[ "${FSTYPE}" = "btrfs" ]]; then
		DIALOG --msgbox "Error:\nYour selected bootloader cannot boot from btrfs partition with /boot on it." 0 0
		return 1
	fi
}