warn before removing .base_installed

data/translations/danish.trans

@@ -256,6 +256,7 @@ _ExtPartBody1="\nAngiv partitionens placering. Skal begynde med skråstreg (/).
 _ExtErrBody="\nPartitionen kan ikke monteres - kontroller navnet. Der skal angives navn efter skråstregen (/).\n\n"
 
 # Install Base
+_WarnInstBase="A Manjaro Base has already been installed on this partition.\nProceed anyway?"       # translate me !
 _InstBseTitle="Installer Base"
 _InstBseBody="\nStandard: anbefalet for uerfarne. Vælg op til to kerner (linux and linux-lts) og om nødvendigt pakke-gruppen base-devel. Programmerne sudo, btrfs-progs, f2fs-tools installeres også.\n\nAvanceret: Vælg op til fire kerner (linux, lts, grsec, zen) og udvælg individuelle pakker fra base/base-devev gruppen. Yderligere opsætning af grsec og zen kan være nødvendig for Virtualbox and NVIDIA.\n\nBEMÆRK: Med untagelse af allerede installerede kerner, skal mindst en kerne vælges."
 _InstStandBseBody="\nPakke-gruppen base installeres automatisk. Pakke-gruppen base-devel er nødvendig hvis det er hensigten at anvende Arch User Repository (AUR) .\n\n"

data/translations/dutch.trans

@@ -255,6 +255,7 @@ _ExtPartBody1="\nBepaal een partitie aankoppelpunt. Verzeker je ervan dat de naa
 _ExtErrBody="\nPartitie kan niet worden aangekoppeld wegens een probleem met de aankoppelnaam. De naam moet achter een voorwaartse slash komen.\n\n"
 
 # Installeer Basissysteem
+_WarnInstBase="A Manjaro Base has already been installed on this partition.\nProceed anyway?"       # translate me !
 _InstBseTitle="Installeer Basissysteem"
 _InstBseBody="\nStandaard: Aanbevolen voor beginners. Keuze tot twee kernels (linux en linux-lts) en optioneel kunnen de base-devel pakket groep. sudo, btrfs-progs, f2fs-tools ook worden geïnstalleerd.\n\nGevorderden: Keuze tot vier kernels (linux, lts, grsec, zen) en controle over individuele base en base-devel pakketten. Bijkomende configuratie van vgrsec en zen kan nodig zijn voor Virtualbox en NVIDIA.\n\nNOTE: Tenzij er reeds een kernel geïnstalleerd is, moet er tenminste een kernel worden geselecteerd."
 _InstStandBseBody="\nDe base package group zal automatisch worden geïnstalleerd. The base-devel package group is nodig voor de Arch User Repository (AUR).\n\n"

data/translations/english.trans

@@ -254,6 +254,7 @@ _ExtPartBody1="\nSpecify partition mountpoint. Ensure the name begins with a for
 _ExtErrBody="\nPartition cannot be mounted due to a problem with the mountpoint name. A name must be given after a forward slash.\n\n"
 
 # Install Base
+_WarnInstBase="A Manjaro Base has already been installed on this partition.\nProceed anyway?"
 _InstBseTitle="Install Base"
 _InstBseBody="\nStandard: Recommended for beginners. Choose up to two kernels (linux and linux-lts) and optionally the base-devel package group. sudo, btrfs-progs, f2fs-tools will also be installed.\n\nAdvanced: Choose up to four kernels (linux, lts, grsec, zen) and control individual base and base-devel packages. Additional configuration for grsec and zen may be required for Virtualbox and NVIDIA.\n\nNOTE: Unless already installed, at least one kernel must be selected."
 _InstStandBseBody="\nThe base package group will be installed automatically. The base-devel package group is required to use the Arch User Repository (AUR).\n\n"
@@ -379,7 +380,7 @@ _InstGrMenuDM="Install Display Manager"
 # Networking Menu
 _InstNMMenuTitle="Install Networking Capabilties"
 _InstNWDrv="Install Network Drivers"
-_InfoNWKernel="Support for your network card is built into the kernel, \nno need to install anything."
+_InfoNWKernel="Support for your network card is built into the kernel,\nno need to install anything."
 _InstNMMenuBody="\nSupplementary packages may be required for networking and wireless devices. Some wireless devices may also require additional firmware to function.\n\n"
 _InstNMMenuPkg="Install Wireless Device Packages"
 _InstNMMenuNM="Install Network Connection Manager"

data/translations/french.trans

@@ -256,6 +256,7 @@ _ExtPartBody1="\nSpécifier le point de montage de la partition. Assurez-vous qu
 _ExtErrBody="\nLa partition ne peut être montée, cela est dû à un problème avec le nom du point de montage. Un nom doit être déterminé après la barre oblique.\n\n"
 
 # Installer Base
+_WarnInstBase="A Manjaro Base has already been installed on this partition.\nProceed anyway?"       # translate me !
 _InstBseTitle="Installer la Base"
 _InstBseBody="\nStandard : Recommandé pour les débutants. Choix entre 2 noyaux (linux et linux-lts) et choix optionnel du groupe de paquets 'base-devel'. sudo, btrfs-progs, f2fs-tools seront également installés.\n\nAvancé : Choix entre 4 noyaux (linux, lts, grsec, zen) et contrôle individuel des paquets de 'base' et 'base-devel'. Une configuration additionnelle de grsec et zen peut être requise pour NVIDIA et Virtualbox.\n\nNOTE : Sauf si déjà installé, au moins un noyau doit être sélectionné."
 _InstStandBseBody="\nLe groupe de paquets 'base' va être installé automatiquement. Le groupe de paquets 'base-devel' est nécessaire afin d'utiliser le dépôt AUR (Arch User Repository ).\n\n"

data/translations/german.trans

@@ -254,6 +254,7 @@ _ExtPartBody1="\nSpecify partition mountpoint. Ensure the name begins with a for
 _ExtErrBody="\nPartition cannot be mounted due to a problem with the mountpoint name. A name must be given after a forward slash.\n\n"
 
 # Install Base
+_WarnInstBase="A Manjaro Base has already been installed on this partition.\nProceed anyway?"       # translate me !
 _InstBseTitle="Install Base"
 _InstBseBody="\nStandard: Recommended for beginners. Choose up to two kernels (linux and linux-lts) and optionally the base-devel package group. sudo, btrfs-progs, f2fs-tools will also be installed.\n\nAdvanced: Choose up to four kernels (linux, lts, grsec, zen) and control individual base and base-devel packages. Additional configuration for grsec and zen may be required for Virtualbox and NVIDIA.\n\nNOTE: Unless already installed, at least one kernel must be selected."
 _InstStandBseBody="\nThe base package group will be installed automatically. The base-devel package group is required to use the Arch User Repository (AUR).\n\n"

data/translations/hungarian.trans

@@ -250,6 +250,7 @@ _ExtPartBody1="\nAdj meg partíció csatolási pontot. Figyelj arra, hogy a név
 _ExtErrBody="\nA partíció nem csatolható a csatolási pont nevének hibája miatt. A nevet per (/) jel után add meg.\n\n"
 
 # Alaprendszer telepítése
+_WarnInstBase="A Manjaro Base has already been installed on this partition.\nProceed anyway?"       # translate me !
 _InstBseTitle="Alaprendszer telepítése"
 _InstBseBody="\nNormál: a kezdőknek ajánlott. Válassz maximum két kernelt (linux and linux-lts). A 'base-devel' csomagcsoport opcionális. A 'sudo’, ‘btrfs-progs’, ‘f2fs-tools' csomagok is telepítve lesznek.\n\nHaladó: Válassz ki legfeljebb négy kernelt (linux, lts, grsec, zen) és egyedi 'base' és 'base-devel' csomagokat. A  'grsec' és 'zen' kerneleknél további konfigurációra lehet szükség a 'Virtualbox' és NVIDIA használatához.\n\nMegjegyzés: Ha nincs még kernel telepítve, akkor legalább egy kernelt választanod kell."
 _InstStandBseBody="\nA telepítő a következő lépésben a telepíteni fogja az alapcsomagokat. A 'base-devel' csomagcsoport az Arch User Repository (AUR) használatához szükséges.\n\n"

data/translations/italian.trans

@@ -255,6 +255,7 @@ _ExtPartBody1="\nSpecificare mountpoint partizione. Assicurarsi che il nome comi
 _ExtErrBody="\nImpossibile montare la partizione a case di un problema con il nome mountpoint. Deve essere indicato un nome dopo lo slash.\n\n"
 
 # Install Base
+_WarnInstBase="A Manjaro Base has already been installed on this partition.\nProceed anyway?"       # translate me !
 _InstBseTitle="Installazione di base"
 _InstBseBody="\nStandard: Raccomandata per i principianti. Scegliere fino a due kernels (linux and linux-lts) e volendo il gruppo pacchetti base-devel. In aggiunta, verranno installati sudo, btrfs-progs, f2fs-tools.\n\nAvanzato: Selezionare fino a 4 kernels (linux, lts, grsec, zen) e controllare pacchetti base e base-devel individualmente. Potrebbe essere richiesta configurazione aggiuntiva con grsec e zen per Virtualbox e NVIDIA.\n\nNOTA: a meno di installazioni precedenti, è necessario selezionare almeno un kernel."
 _InstStandBseBody="\nIl gruppo di pacchetti base verrà installato automaticamente. Il gruppo di pacchetti base-devel è richiesto per utilizzare l'Arch User Repository (AUR).\n\n"

data/translations/portuguese.trans

@@ -254,6 +254,7 @@ _ExtPartBody1="\nEspecifique o ponto de montagem da partição. Verifique se o n
 _ExtErrBody="\nA partição não pode ser montada devido a um problema com o nome do ponto de montagem. Um nome deve ser dado depois da barra.\n\n"
 
 # Instalar Base
+_WarnInstBase="A Manjaro Base has already been installed on this partition.\nProceed anyway?"       # translate me !
 _InstBseTitle="Instalar Base"
 _InstBseBody="\nPadrão: Recomendado para iniciantes. Escolha até dois kernels (linux e linux-lts) e opcionalmente o grupo de pacotes base-devel. O sudo, btrfs-progs, f2fs-tools também serão instalados.\n\nAvançado: Escolha até quatro kernels (linux, lts, grsec, zen) e controle individualmente os pacotes base e base-devel. O Virtualbox e a NVIDIA podem precisar de configuração adicional com o grsec e zen.\n\nNOTA: Ao menos que já instalado, um kernel deve ser seleccionado."
 _InstStandBseBody="\nO grupo pacote básico será instalado automaticamente. O grupo pacote base-devel é necessário para usar o repositório do usuário Manjaro (AUR).\n\n"

data/translations/portuguese_brasil.trans

@@ -255,6 +255,7 @@ _ExtPartBody1="\nEspecifique o ponto de montagem da partição. Certifique-se qu
 _ExtErrBody="\nA partição não pode ser montada devido a um problema com o nome do ponto de montagem. Um nome deve ser dado depois da barra.\n\n"
 
 # Instalar Base
+_WarnInstBase="A Manjaro Base has already been installed on this partition.\nProceed anyway?"       # translate me !
 _InstBseTitle="Instalar Base"
 _InstBseBody="\nPadrão: Recomendado para iniciantes. Escolha até dois kernels (linux e linux-lts) e opcionalmente o grupo de pacotes base-devel. O sudo, btrfs-progs, f2fs-tools também serão instalados.\n\nAvançada: Escolha até quatro kernels (linux, lts, grsec, zen) e controle individualmente os pacotes base e base-devel. O Virtualbox e a NVIDIA podem precisar de configuração adicional com o grsec e zen.\n\nNOTA: Ao menos que já instalado, um kernel deve ser selecionado."
 _InstStandBseBody="\nO grupo de pacote base será instalado automaticamente. The base package group will be installed automatically. O grupo de pacote base-devel é necessário para utilizar o AUR (Arch User Repository).\n\n"

data/translations/russian.trans

@@ -255,6 +255,7 @@ _ExtPartBody1="\nУкажите точку монтирования. Убеди
 _ExtErrBody="\nРаздел не может быть смонтирован из-за проблем с именем точки монтирования. Имя должно быть введено после косой черты.\n\n"
 
 # Install Base
+_WarnInstBase="A Manjaro Base has already been installed on this partition.\nProceed anyway?"       # translate me !
 _InstBseTitle="Установка базовой системы"
 _InstBseBody="\nСтандартная: Рекомендуется для новичов. Выберите до двух ядер (linux и linux-lts) и опциональную группу пакетов base-devel. Пакеты sudo, btrfs-progs, f2fs-tools также будут установлены.\n\nРасширенная: Выберите до четырех ядер (linux, lts, grsec, zen) и индивидуально настройте пакеты base и base-devel. Дополнительная настройка grsec и zen может быть необходимой для Virtualbox и NVIDIA.\n\nПРИМЕЧАНИЕ: Необходимо выбрать как минимум одно ядро, если оно еще не установлено."
 _InstStandBseBody="\nГруппа пакетов base будет установлена автоматически. Группа пакетов base-devel требуется для использования Arch User Repository (AUR).\n\n"

data/translations/spanish.trans

@@ -255,6 +255,7 @@ _ExtPartBody1="\nPunto de montaje de partición específica. Asegúrese de que e
 _ExtErrBody="\nLa partición no se puede montar debido a un problema con el nombre del punto de montaje. Se debe indicar un nombre después de una barra inclinada (/).\n\n"
 
 # Instalar sistema base
+_WarnInstBase="A Manjaro Base has already been installed on this partition.\nProceed anyway?"       # translate me !
 _InstBseTitle="Instalar sistema base"
 _InstBseBody="\nEstándar: Recomendado para principiantes. Elija hasta dos núcleos (linux y linux-lts) y opcionalmente el grupo de paquetes 'base-devel'. También se instalará sudo, btrfs-progs y f2fs-tools.\n\nAvanzado: Elija hasta cuatro núcleos (linux, lts, grsec, zen) y controle de forma individual los paquetes de 'base' y 'base-devel'. VirtualBox y NVIDIA pueden requerir configuración adicional con grsec y zen.\n\nNOTA: A menos que ya esté instalado, se necesita seleccionar al menos un núcleo."
 _InstStandBseBody="\nSe instalará de forma automática el grupo de paquetes 'base'. El grupo de paquetes 'base-devel' es necesario para poder usar el Arch User Repository (AUR).\n\n"

lib/util-base.sh

@@ -209,6 +209,9 @@ filter_packages() {
 }
 
 install_base() {
+    if [[ -e /mnt/.base_installed ]]; then
+        DIALOG " $_InstBseTitle " --yesno "\n\n$_WarnInstBase\n\n" 0 0 && rm /mnt/.base_installed || return 0
+    fi
     # Prep variables
     setup_profiles
     echo "" > ${PACKAGES}
@@ -218,7 +221,6 @@ install_base() {
     KERNEL="n"
     mhwd-kernel -l | awk '/linux/ {print $2}' > /tmp/.available_kernels
     kernels=$(cat /tmp/.available_kernels)
-    [[ -e /mnt/.base_installed ]] && rm /mnt/.base_installed
 
     # User to select initsystem
     DIALOG " $_ChsInit " --menu "\n$_WarnOrc\n" 0 0 2 \

lib/util-desktop.sh

@@ -38,7 +38,7 @@ setup_graphics_card() {
 
 setup_network_drivers() {
     if [[ $(mhwd -l | awk '/network-/' | wc -l) -eq 0 ]]; then 
-        DIALOG " $_InstNWDrv " --msgbox "$_InfoNWKernel" 0 0
+        DIALOG " $_InstNWDrv " --msgbox "\n\n$_InfoNWKernel\n\n" 0 0
     else
         DIALOG " $_InstGrDrv " --radiolist "\n$_UseSpaceBar" 0 0 12 \
           $(mhwd -l | awk '/network-/{print $1}' |awk '$0=$0" - off"')  2> /tmp/.network_driver || return 0