diff --git a/bin/check-translate.sh b/bin/check-translate.sh
new file mode 100755
index 0000000..d590571
--- /dev/null
+++ b/bin/check-translate.sh
@@ -0,0 +1,16 @@
+#!/usr/bin/bash
+
+fns=($(awk -F'=' '/^_/ {print $1}' "../data/translations/english.trans"))
+
+for lg in ../data/translations/*.trans ; do
+    trans=$(<"${lg}")
+    not=$(echo "${trans}" | grep -cE "#.*translate me")
+    echo -e "\n-- $(basename "${lg}") ${not} to translate --"
+    for key in "${fns[@]}"; do
+        if [[ ! $trans =~ $key ]]; then
+            echo -e "\t${key} not exist"
+        fi
+    done
+done
+
+#echo -e "${fns[*]}"
\ No newline at end of file
diff --git a/data/translations/danish.trans b/data/translations/danish.trans
index 6f0cd22..b0e442a 100644
--- a/data/translations/danish.trans
+++ b/data/translations/danish.trans
@@ -221,7 +221,7 @@ _FSBody="\nExt4 anbefales. Ikke alle filsystemer er brugbare til Root eller Boot
 _FSSkip="Spring over / Ingen"
 _FSMount="Monter"
 _FSWarn1="Alle data på"
-_FSWarn2="vil gå uigenkaldeligt tabt!"
+_FSWarn2="vil gå uigenkaldeligt tabt"
 
 # Select Root
 _SelRootBody="\nFørste parttion er ROOT ('/'). Dette er hvor Manjaro skal installeres."
@@ -293,6 +293,11 @@ _DEInfoBody="\nFlere miljøer kan installeres.\n\nGnome og LXDE installerer disp
 
 # Install DE Menu
 _InstDETitle="Installer Skrivebords Miljø(er)"
+_InstManDEBody="Please choose a Manjaro Environment.\n\nNote that the following are currently available for systemd base only:" # translate me !
+_ErrInit="Wrong init system" # translate me !
+_WarnInit="is currently available for systemd only\nPlease adjust your selection:" # translate me !
+_DiffPro="Select different profile" # translate me !
+_InstSystd="Install systemd base" # translate me !
 _InstDEBody="Skrivebords Miljøer og deres tilhørende pakkegrupper er listet først."
 _ExtraTitle=" Komplet eller minimum? "
 _ExtraBody="Denne udgave findes i to varianter"
@@ -396,3 +401,4 @@ _MMBody="\nHvert trin skal udføres i den angivne rækkefølge. Trin 4-8 er alle
 
 # Close Installer
 _CloseInstBody="Afslut installation?"
+_LogInfo="Would you like to keep the install-log?\nIt will be copied to /.m-a.log of the target install, accessible with root permissions only." # translate me !
diff --git a/data/translations/dutch.trans b/data/translations/dutch.trans
index f8dd390..119d8c4 100644
--- a/data/translations/dutch.trans
+++ b/data/translations/dutch.trans
@@ -220,7 +220,7 @@ _FSBody="\nExt4 is hier aanbevolen. Niet alle bestandsystemen zijn geschikt voor
 _FSSkip="Sla over / Geen"
 _FSMount="Mount"         # translate me !
 _FSWarn1="Data on"       # translate me !
-_FSWarn2="will be lost!" # translate me !
+_FSWarn2="will be lost"  # translate me !
 
 # Selecteer Root
 _SelRootBody="\nSelecteer de ROOT Partitie. Dit is waar Manjaro zal worden geïnstalleerd."
@@ -292,6 +292,11 @@ _DEInfoBody="\nmeerdere Desktop Suites kunnen worden geïnstalleerd.\n\nGnome en
 
 # Installeer DE Menu
 _InstDETitle="Installeer Desktop Suites"
+_InstManDEBody="Please choose a Manjaro Environment.\n\nNote that the following are currently available for systemd base only:" # translate me !
+_ErrInit="Wrong init system" # translate me !
+_WarnInit="is currently available for systemd only\nPlease adjust your selection:" # translate me !
+_DiffPro="Select different profile" # translate me !
+_InstSystd="Install systemd base" # translate me !
 _InstDEBody="Desktop Suites en hun verwante pakketten staan bovenaan de lijst."
 _ExtraTitle=" Full or minimal? "                     # translate me "
 _ExtraBody="This edition is offered in two versions" # translate me "
@@ -395,3 +400,4 @@ _MMBody="\nElke stap moet IN VOLGORDE uitgevoerd worden. Eenmaal alles is afgewe
 
 # Sluit Installer
 _CloseInstBody="Installatieprogramma Afsluiten?"
+_LogInfo="Would you like to keep the install-log?\nIt will be copied to /.m-a.log of the target install, accessible with root permissions only." # translate me !
diff --git a/data/translations/english.trans b/data/translations/english.trans
index b89dab2..57a75a8 100644
--- a/data/translations/english.trans
+++ b/data/translations/english.trans
@@ -219,7 +219,7 @@ _FSBody="\nExt4 is recommended. Not all filesystems are viable for Root or Boot
 _FSSkip="Skip / None"
 _FSMount="Mount"
 _FSWarn1="Data on"
-_FSWarn2="will be lost!"
+_FSWarn2="will be lost"
 
 # Select Root
 _SelRootBody="\nSelect ROOT Partition. This is where Manjaro will be installed."
@@ -291,6 +291,11 @@ _DEInfoBody="\nMultiple environments can be installed.\n\nGnome and LXDE come wi
 
 # Install DE Menu
 _InstDETitle="Install Desktop Environments"
+_InstManDEBody="Please choose a Manjaro Environment.\n\nNote that the following are currently available for systemd base only:"
+_ErrInit="Wrong init system"
+_WarnInit="is currently available for systemd only\nPlease adjust your selection:"
+_DiffPro="Select different profile"
+_InstSystd="Install systemd base"
 _InstDEBody="Desktop Environments and their related package groups are listed first."
 _ExtraTitle=" Full or minimal? "
 _ExtraBody="This edition is offered in two versions"
@@ -394,3 +399,4 @@ _MMBody="\nEach step must be followed IN ORDER. Steps 4-8 are all optional. Once
 
 # Close Installer
 _CloseInstBody="Close installer?"
+_LogInfo="Would you like to keep the install-log?\nIt will be copied to /.m-a.log of the target install, accessible with root permissions only."
diff --git a/data/translations/french.trans b/data/translations/french.trans
index 2e114f0..2ff8cf1 100644
--- a/data/translations/french.trans
+++ b/data/translations/french.trans
@@ -85,7 +85,7 @@ _LuksEncryptBody="\nSélectionner une partition à crypter."
 _LuksEncruptSucc="\nTerminé ! Ouvert et prêt pour LVM (recommandé) ou montage direct.\n"
 _LuksPartErrBody="\nUn minimum de deux partitions est nécessaire pour le cryptage :\n\n1. Root (/) - partition standard ou lvm.\n\n2. Boot (/boot ou /boot/efi) - partition standard uniquement (excepté lvm utilisant BIOS Grub).\n"
 _SelLuksRootBody="\nSélectionner la partition ROOT (/) à crypter. Manjaro sera installé dans cette partition.\n\n"
-_SelLuksRootBody="\nEntrer un mot de passe pour crypter/décrypter la partition. Le mot de passe ne doit pas être le même que celui du compte utilisateur ou administrateur.\n"
+_LuksPassBody="\nEntrer un mot de passe pour crypter/décrypter la partition. Le mot de passe ne doit pas être le même que celui du compte utilisateur ou administrateur.\n"
 _LuksWaitBody="\nCréation d'une partition Root crypté :"
 _LuksWaitBody2="Périphérique ou volume utilisé :"
 _LuksCipherKey="\nDès que les drapeaux spécifiés sont modifiés, ils peuvent être automatiquement utilisés avec la commande 'cryptsetup -q luksFormat /dev/...'.\n\nNOTE : Les fichiers de clé ne sont pas supportés ; Ils peuvent être ajoutés manuellement après l'installation. Ne spécifier aucuns drapeaux additionnels du genre -v (--verbose) ou -y (verify-passphrase).\n"
@@ -106,11 +106,11 @@ _LvmPvConfBody1="\nConfirmer la création du groupe de volume"
 _LvmPvConfBody2="avec les partitions suivantes :\n\n"
 _LvmPvActBody1="\nCréation et activation du groupe de volume"
 _LvmPvDoneBody1="\nLe groupe de volume"
-LvmPvDoneBody2="a été créé"
+_LvmPvDoneBody2="a été créé"
 _LvmLvNumBody1="\nUtiliser [barre espace] pour sélectionner le nombre de volumes logiques (LVs) à créer dans"
 _LvmLvNumBody2="\n\nLe dernier (ou seul) LV utilisera automatiquement 100% de l'espace restant dans le groupe de volume."
 _LvmLvNameBody1="\nEntrer le nom du volume logique (LV) à créer.\n\nCeci ressemble à une configuration de nom / d'étiquette pour une partition.\n"
-LvmLvNameBody2="\nNOTE : Ce LV utilisera automatiquement tout l'espace restant dans le groupe de volume"
+_LvmLvNameBody2="\nNOTE : Ce LV utilisera automatiquement tout l'espace restant dans le groupe de volume"
 _LvmLvNameErrBody="\nNom entré incorrect. Le nom du volume logique (LV) peut contenir des caractères alphanumériques, mais ne peut pas contenir d'espaces ou être précédé par un « / ».\n\n" 
 _LvmLvSizeBody1="restant"
 _LvmLvSizeBody2="\n\nEntrer la taille du volume logique (LV) en Mégaoctets (M) ou en Gigaoctets (G). Par exemple, 100M créera un VL de 100 Mégaoctets. 10G créera un VL de 10 Gigaoctets.\n"
@@ -221,7 +221,7 @@ _FSBody="\nExt4 est recommandé. Tous les systèmes de fichiers ne sont pas expl
 _FSSkip="Passer / Aucun"
 _FSMount="Monter"
 _FSWarn1="Données dans"
-_FSWarn2="seront perdues!"
+_FSWarn2="seront perdues"
 
 # Sélectionner Root
 _SelRootBody="\nSélectionner la partition racine (ROOT) où Manjaro sera installé."
@@ -293,6 +293,11 @@ _DEInfoBody="\nPlusieurs environnements peuvent être installés.\n\nGnome et LX
 
 # Menu d'installation DE
 _InstDETitle="Installer le ou les environnements de bureau"
+_InstManDEBody="Choisir un environnement Manjaro.\n\nNoter qu'ils sont disponibles en ce moment uniquement pour une base systemd:"
+_ErrInit="Mauvais système d'init"
+_WarnInit="est disponible avec systemd uniquement\nMerçi d'ajuster votre sélection:"
+_DiffPro="Sélectionner un autre profil"
+_InstSystd="Installer la base systemd"
 _InstDEBody="Les environnements de bureau ainsi que leurs groupes de paquets associés sont référencés en premier."
 _ExtraTitle=" Complète ou minimale? "
 _ExtraBody="Cette édition est disponible en deux versions"
@@ -396,3 +401,4 @@ _MMBody="\nChaque étape doit être suivie DANS L'ORDRE. Les étapes 4-8 sont to
 
 # Fermer l'installateur
 _CloseInstBody="Fermer l'installateur ?"
+_LogInfo="Would you like to keep the install-log?\nIt will be copied to /.m-a.log of the target install, accessible with root permissions only." # translate me !
diff --git a/data/translations/german.trans b/data/translations/german.trans
index 67eeda9..fc07287 100644
--- a/data/translations/german.trans
+++ b/data/translations/german.trans
@@ -219,7 +219,7 @@ _FSBody="\nExt4 is recommended. Not all filesystems are viable for Root or Boot
 _FSSkip="Skip / None"
 _FSMount="Mount"         # translate me !
 _FSWarn1="Data on"       # translate me !
-_FSWarn2="will be lost!" # translate me !
+_FSWarn2="will be lost" # translate me !
 
 # Select Root
 _SelRootBody="\nSelect ROOT Partition. This is where Manjaro will be installed."
@@ -291,6 +291,11 @@ _DEInfoBody="\nMultiple environments can be installed.\n\nGnome and LXDE come wi
 
 # Install DE Menu
 _InstDETitle="Install Desktop Environments"
+_InstManDEBody="Please choose a Manjaro Environment.\n\nNote that the following are currently available for systemd base only:" # translate me !
+_ErrInit="Wrong init system" # translate me !
+_WarnInit="is currently available for systemd only\nPlease adjust your selection:" # translate me !
+_DiffPro="Select different profile" # translate me !
+_InstSystd="Install systemd base" # translate me !
 _InstDEBody="Desktop Environments and their related package groups are listed first."
 _ExtraTitle=" Full or minimal? "                     # translate me "
 _ExtraBody="This edition is offered in two versions" # translate me "
@@ -394,3 +399,4 @@ _MMBody="\nEach step must be followed IN ORDER. Steps 4-8 are all optional. Once
 
 # Close Installer
 _CloseInstBody="Close installer?"
+_LogInfo="Would you like to keep the install-log?\nIt will be copied to /.m-a.log of the target install, accessible with root permissions only." # translate me !
diff --git a/data/translations/hungarian.trans b/data/translations/hungarian.trans
index 4877735..45ade8e 100644
--- a/data/translations/hungarian.trans
+++ b/data/translations/hungarian.trans
@@ -220,7 +220,7 @@ _FSBody="\nExt4 az ajánlott. Nem minden fájlrendszer alkalmas  Root vagy Boot
 _FSSkip="Kihagyás / egyik sem"
 _FSMount="Mount"         # translate me !
 _FSWarn1="Data on"       # translate me !
-_FSWarn2="will be lost!" # translate me !
+_FSWarn2="will be los" # translate me !
 
 # Gyökérpartíció (ROOT) kiválasztása
 _SelRootBody="\nVálassz gyökérpartíciót (ROOT). Ez lesz ahová az Archot telepítjük."
@@ -292,6 +292,11 @@ _DEInfoBody="\nTöbb környezetben is telepíthető.\n\nGnome és LXDE tartalmaz
 
 # Asztali környezetek telepítése menü
 _InstDETitle="Asztali környezetek telepítése "
+_InstManDEBody="Please choose a Manjaro Environment.\n\nNote that the following are currently available for systemd base only:" # translate me !
+_ErrInit="Wrong init system" # translate me !
+_WarnInit="is currently available for systemd only\nPlease adjust your selection:" # translate me !
+_DiffPro="Select different profile" # translate me !
+_InstSystd="Install systemd base" # translate me !
 _InstDEBody="Az asztali környezetek, és a hozzájuk tartozó programcsoportok lesznek listázva először."
 _ExtraTitle=" Full or minimal? "                     # translate me !
 _ExtraBody="This edition is offered in two versions" # translate me !
@@ -395,3 +400,4 @@ _MMBody="\nMinden szükséges lépést követned kell a telepítés érdekében.
 
 # Telepítő bezárása
 _CloseInstBody="Bezárod a telepítőt?"
+_LogInfo="Would you like to keep the install-log?\nIt will be copied to /.m-a.log of the target install, accessible with root permissions only." # translate me !
diff --git a/data/translations/italian.trans b/data/translations/italian.trans
index bfe861c..8bbfa1b 100644
--- a/data/translations/italian.trans
+++ b/data/translations/italian.trans
@@ -220,7 +220,7 @@ _FSBody="\nExt4 è la scelta consigliata. Non tutti i filesystem sono utilizzabi
 _FSSkip="Salta / Nessuno"
 _FSMount="Mount"         # translate me !
 _FSWarn1="Data on"       # translate me !
-_FSWarn2="will be lost!" # translate me !
+_FSWarn2="will be lost" # translate me !
 
 # Select Root
 _SelRootBody="\nSelezionare partizione ROOT. Manjaro sarà installata qui."
@@ -292,6 +292,11 @@ _DEInfoBody="\nPossono essere installati più ambienti.\n\nGnome e LXDE includon
 
 # Install DE Menu
 _InstDETitle="Installazione Ambiente Desktop"
+_InstManDEBody="Please choose a Manjaro Environment.\n\nNote that the following are currently available for systemd base only:" # translate me !
+_ErrInit="Wrong init system" # translate me !
+_WarnInit="is currently available for systemd only\nPlease adjust your selection:" # translate me !
+_DiffPro="Select different profile" # translate me !
+_InstSystd="Install systemd base" # translate me !
 _InstDEBody="Gli ambienti desktop e i pacchetti relativi sono indicati per primi."
 _ExtraTitle=" Full or minimal? "                     # translate me !
 _ExtraBody="This edition is offered in two versions" # translate me !
@@ -395,3 +400,4 @@ _MMBody="\nOgni passaggio deve essere eseguito IN ORDINE. I passaggi 4-8 sono op
 
 # Chiudere il programma di istallazione
 _CloseInstBody="Chiudere il programma di installazione?"
+_LogInfo="Would you like to keep the install-log?\nIt will be copied to /.m-a.log of the target install, accessible with root permissions only." # translate me !
diff --git a/data/translations/portuguese.trans b/data/translations/portuguese.trans
index 3da8e3c..a8a7b5e 100644
--- a/data/translations/portuguese.trans
+++ b/data/translations/portuguese.trans
@@ -220,7 +220,7 @@ _FSBody="\nExt4 é recomendado. Nem todos os sistemas de arquivos são viáveis
 _FSSkip="Saltar/ Nenhum"
 _FSMount="Mount"         # translate me !
 _FSWarn1="Data on"       # translate me !
-_FSWarn2="will be lost!" # translate me !
+_FSWarn2="will be lost"  # translate me !
 
 # Seleccionar Root
 _SelRootBody="\nSeleccione a partição ROOT. Este é o lugar onde Manjaro será instalado."
@@ -292,6 +292,11 @@ _DEInfoBody="\nVários ambientes podem ser instalados.\n\nGnome e LXDE vem com u
 
 # Menu de instalação dos Ambientes de Desktop
 _InstDETitle="Instalar os Ambientes de Desktop"
+_InstManDEBody="Please choose a Manjaro Environment.\n\nNote that the following are currently available for systemd base only:" # translate me !
+_ErrInit="Wrong init system" # translate me !
+_WarnInit="is currently available for systemd only\nPlease adjust your selection:" # translate me !
+_DiffPro="Select different profile" # translate me !
+_InstSystd="Install systemd base" # translate me !
 _InstDEBody="Ambientes de desktop e seus grupos de pacotes relacionados são listados primeiro."
 _ExtraTitle=" Full or minimal? "                     # translate me !
 _ExtraBody="This edition is offered in two versions" # translate me !
@@ -395,3 +400,4 @@ _MMBody="\nCada passo deve ser seguido NA ORDEM. Os passos 4-8 são todos opcion
 
 # Fechar o instalador
 _CloseInstBody="Fechar o instalador?"
+_LogInfo="Would you like to keep the install-log?\nIt will be copied to /.m-a.log of the target install, accessible with root permissions only." # translate me !
diff --git a/data/translations/portuguese_brasil.trans b/data/translations/portuguese_brasil.trans
index 3193d47..7c93afd 100644
--- a/data/translations/portuguese_brasil.trans
+++ b/data/translations/portuguese_brasil.trans
@@ -220,7 +220,7 @@ _FSBody="\nExt4 é recomendado. Nem todos os sistemas de arquivos são viáveis
 _FSSkip="Pular / Nenhum"
 _FSMount="Mount"         # translate me !
 _FSWarn1="Data on"       # translate me !
-_FSWarn2="will be lost!" # translate me !
+_FSWarn2="will be lost"  # translate me !
 
 # Selecionar Root
 _SelRootBody="\nSelecione a partição ROOT. Este é o lugar onde Manjaro será instalado."
@@ -292,6 +292,11 @@ _DEInfoBody="\nVários ambientes podem ser instalados.\n\nGnome e LXDE vem com u
 
 # Menu de instalação dos ambientes de desktop
 _InstDETitle="Instalar os ambientes de desktop"
+_InstManDEBody="Please choose a Manjaro Environment.\n\nNote that the following are currently available for systemd base only:" # translate me !
+_ErrInit="Wrong init system" # translate me !
+_WarnInit="is currently available for systemd only\nPlease adjust your selection:" # translate me !
+_DiffPro="Select different profile" # translate me !
+_InstSystd="Install systemd base" # translate me !
 _InstDEBody="Ambientes de desktop são listados primeiro, e podem ter múltiplas opções de download."
 _ExtraTitle=" Full or minimal? "                     # translate me !
 _ExtraBody="This edition is offered in two versions" # translate me !
@@ -395,3 +400,4 @@ _MMBody="\nCada passo deve ser seguido NA ORDEM. Os passos 4-8 são todos opcion
 
 # Fechar o instalador
 _CloseInstBody="Fechar o instalador?"
+_LogInfo="Would you like to keep the install-log?\nIt will be copied to /.m-a.log of the target install, accessible with root permissions only." # translate me !
diff --git a/data/translations/russian.trans b/data/translations/russian.trans
index 46cfeee..d0cab32 100644
--- a/data/translations/russian.trans
+++ b/data/translations/russian.trans
@@ -220,7 +220,7 @@ _FSBody="\nРекомендуется использовать Ext4. Не все
 _FSSkip="Пропустить / Ничего"
 _FSMount="Mount"         # translate me !
 _FSWarn1="Data on"       # translate me !
-_FSWarn2="will be lost!" # translate me !
+_FSWarn2="will be lost"  # translate me !
 
 # Select Root
 _SelRootBody="\nВыберите ROOT раздел. Это тот раздел куда будет устанавливаться Manjaro."
@@ -292,6 +292,11 @@ _DEInfoBody="\nМожно установить несколько окружен
 
 # Install DE Menu
 _InstDETitle="Установка окружения рабочего стола"
+_InstManDEBody="Please choose a Manjaro Environment.\n\nNote that the following are currently available for systemd base only:" # translate me !
+_ErrInit="Wrong init system" # translate me !
+_WarnInit="is currently available for systemd only\nPlease adjust your selection:" # translate me !
+_DiffPro="Select different profile" # translate me !
+_InstSystd="Install systemd base" # translate me !
 _InstDEBody="Окружения рабочего стола и связанные с ними группы пакетов отображаются в первую очередь."
 _ExtraTitle=" Full or minimal? "                     # translate me !
 _ExtraBody="This edition is offered in two versions" # translate me !
@@ -395,3 +400,4 @@ _MMBody="\nКаждый шаг должен идти ПО ПОРЯДКУ. Шаг
 
 # Close Installer
 _CloseInstBody="Закрыть установщик?"
+_LogInfo="Would you like to keep the install-log?\nIt will be copied to /.m-a.log of the target install, accessible with root permissions only." # translate me !
diff --git a/data/translations/spanish.trans b/data/translations/spanish.trans
index 3489356..0ca7292 100644
--- a/data/translations/spanish.trans
+++ b/data/translations/spanish.trans
@@ -220,7 +220,7 @@ _FSBody="\nSe recomienda el sistema de archivos Ext4. No todos los sistemas de a
 _FSSkip="Saltar / Ninguno"
 _FSMount="Mount"         # translate me !
 _FSWarn1="Data on"       # translate me !
-_FSWarn2="will be lost!" # translate me !
+_FSWarn2="will be lost"  # translate me !
 
 # Seleccionar raíz
 _SelRootBody="\nSeleccione la partición RAÍZ. Aquí es donde se instalará Manjaro."
@@ -292,6 +292,11 @@ _DEInfoBody="\nSe pueden instalar varios entornos de escritorio.\n\nGnome y LXDE
 
 # Menú de instalación de entornos de escritorio
 _InstDETitle="Instalar entornos de escritorio"
+_InstManDEBody="Please choose a Manjaro Environment.\n\nNote that the following are currently available for systemd base only:" # translate me !
+_ErrInit="Wrong init system" # translate me !
+_WarnInit="is currently available for systemd only\nPlease adjust your selection:" # translate me !
+_DiffPro="Select different profile" # translate me !
+_InstSystd="Install systemd base" # translate me !
 _InstDEBody="Primero se listan los entornos de escritorio y sus grupos de paquetes relacionados."
 _ExtraTitle=" Full or minimal? "                     # translate me !
 _ExtraBody="This edition is offered in two versions" # translate me !
@@ -395,3 +400,4 @@ _MMBody="\nCada paso se ha de seguir en ESTRICTO ORDEN. Los pasos 4 a 8 son opci
 
 # Cerrar instalador
 _CloseInstBody="¿Desea cerrar el instalador?"
+_LogInfo="Would you like to keep the install-log?\nIt will be copied to /.m-a.log of the target install, accessible with root permissions only." # translate me !
diff --git a/lib/util-base.sh b/lib/util-base.sh
index 0a61966..3605eae 100644
--- a/lib/util-base.sh
+++ b/lib/util-base.sh
@@ -74,11 +74,11 @@ set_timezone() {
     DIALOG " $_ConfBseTimeHC " --menu "$_TimeSubZBody" 0 0 11 ${SUBZONE} 2>${ANSWER} || config_base_menu
     SUBZONE=$(cat ${ANSWER})
 
-    DIALOG " $_ConfBseTimeHC " --yesno "$_TimeZQ ${ZONE}/${SUBZONE}?" 0 0
+    DIALOG " $_ConfBseTimeHC " --yesno "\n$_TimeZQ ${ZONE}/${SUBZONE}?\n" 0 0
 
     if (( $? != 0 )); then
         arch_chroot "ln -sf /usr/share/zoneinfo/${ZONE}/${SUBZONE} /etc/localtime" 2>$ERR
-        check_for_error "$FUNCNAME" $? config_base_menu
+        check_for_error "$FUNCNAME ${ZONE}/${SUBZONE}" $? config_base_menu
     else
         config_base_menu
     fi
@@ -239,7 +239,7 @@ install_base() {
     KERNEL="n"
     mhwd-kernel -l | awk '/linux/ {print $2}' > /tmp/.available_kernels
     kernels=$(cat /tmp/.available_kernels)
-    [[ -e /tmp/.base_installed ]] && rm /tmp/.base_installed
+    [[ -e /mnt/.base_installed ]] && rm /mnt/.base_installed
 
     # User to select initsystem
     DIALOG " $_ChsInit " --menu "$_WarnOrc" 0 0 2 \
@@ -249,10 +249,12 @@ install_base() {
         install_base_menu
     fi
     if [[ $(cat ${INIT}) -eq 2 ]]; then
-        touch /tmp/.openrc
+        check_for_error "init openrc"
+        touch /mnt/.openrc
         cat /usr/share/manjaro-architect/package-lists/base-openrc-manjaro > /tmp/.base
     else
-        [[ -e /tmp/.openrc ]] && rm /tmp/.openrc
+        check_for_error "init systemd"
+        [[ -e /mnt/.openrc ]] && rm /mnt/.openrc
         cat /usr/share/manjaro-architect/package-lists/base-systemd-manjaro > /tmp/.base
     fi
   
@@ -264,6 +266,8 @@ install_base() {
     if [[ $(cat ${PACKAGES}) == "" ]]; then
         install_base_menu
     fi
+    check_for_error "selected: $(cat ${PACKAGES})"
+
     # Choose wanted kernel modules
     DIALOG "$_ChsAddPkgs" --checklist "\n\n$_UseSpaceBar" 0 0 12 \
       "KERNEL-headers" "-" off \
@@ -281,6 +285,7 @@ install_base() {
     if [[ $(cat /tmp/.modules) == "" ]]; then
         install_base_menu
     fi
+    check_for_error "modules: $(cat /tmp/.modules)"    
     for kernel in $(cat ${PACKAGES} | grep -v "base-devel") ; do
         cat /tmp/.modules | sed "s/KERNEL/\ $kernel/g" >> /tmp/.base
     done    
@@ -290,6 +295,7 @@ install_base() {
         # Check to see if a kernel is already installed
         ls ${MOUNTPOINT}/boot/*.img >/dev/null 2>&1
         if [[ $? == 0 ]]; then
+            check_for_error "linux-$(ls ${MOUNTPOINT}/boot/*.img | cut -d'-' -f2) is already installed"
             KERNEL="y"
         else
             for i in $(cat /tmp/.available_kernels); do
@@ -300,19 +306,21 @@ install_base() {
         # If no kernel selected, warn and restart
         if [[ $KERNEL == "n" ]]; then
             DIALOG " $_ErrTitle " --msgbox "$_ErrNoKernel" 0 0
+            check_for_error "no kernel selected."
             install_base
         else
-
+            check_for_error "packages to install: $(cat /tmp/.base | tr '\n' ' ')"
             # If at least one kernel selected, proceed with installation.
             basestrap ${MOUNTPOINT} $(cat /tmp/.base) 2>$ERR
             check_for_error "install basepkgs" $? install_base
 
             # If root is on btrfs volume, amend mkinitcpio.conf
-            [[ $(lsblk -lno FSTYPE,MOUNTPOINT | awk '/ \/mnt$/ {print $1}') == btrfs ]] && sed -e '/^HOOKS=/s/\ fsck//g' -i ${MOUNTPOINT}/etc/mkinitcpio.conf
+            [[ $(lsblk -lno FSTYPE,MOUNTPOINT | awk '/ \/mnt$/ {print $1}') == btrfs ]] && sed -e '/^HOOKS=/s/\ fsck//g' -i ${MOUNTPOINT}/etc/mkinitcpio.conf && \
+              check_for_error "root on btrfs volume. amend mkinitcpio."
 
             # If root is on nilfs2 volume, amend mkinitcpio.conf
-            [[ $(lsblk -lno FSTYPE,MOUNTPOINT | awk '/ \/mnt$/ {print $1}') == nilfs2 ]] && sed -e '/^HOOKS=/s/\ fsck//g' -i ${MOUNTPOINT}/etc/mkinitcpio.conf
-
+            [[ $(lsblk -lno FSTYPE,MOUNTPOINT | awk '/ \/mnt$/ {print $1}') == nilfs2 ]] && sed -e '/^HOOKS=/s/\ fsck//g' -i ${MOUNTPOINT}/etc/mkinitcpio.conf && \
+              check_for_error "root on nilfs2 volume. amend mkinitcpio."
 
             # Use mhwd to install selected kernels with right kernel modules
             # This is as of yet untested
@@ -333,12 +341,13 @@ install_base() {
             # if branch was chosen, use that also in installed system. If not, use the system setting
             if [[ -e ${BRANCH} ]]; then
                 sed -i "/Branch =/c\Branch = $(cat ${BRANCH})/" ${MOUNTPOINT}/etc/pacman-mirrors.conf 2>$ERR
-                check_for_error "set target branch -> $(cat ${BRANCH})" $? install_base
+                check_for_error "set target branch $(cat ${BRANCH})" $? install_base
             else
                 sed -i "/Branch =/c$(grep "Branch =" /etc/pacman-mirrors.conf)" ${MOUNTPOINT}/etc/pacman-mirrors.conf 2>$ERR
                 check_for_error "use host branch \($(grep "Branch =" /etc/pacman-mirrors.conf)\)" $? install_base
             fi
-            touch /tmp/.base_installed
+            touch /mnt/.base_installed
+            check_for_error "base installed succesfully."
         fi
     fi
 }
@@ -568,8 +577,8 @@ install_cups() {
     if [[ $(cat ${PACKAGES} | grep "cups") != "" ]]; then
         DIALOG " $_InstNMMenuCups " --yesno "$_InstCupsQ" 0 0
         if [[ $? -eq 0 ]]; then
-            # Add openrc support. If openrcbase was installed, the file /tmp/.openrc should exist.
-            if [[ -e /tmp/.openrc ]]; then
+            # Add openrc support. If openrcbase was installed, the file /mnt/.openrc should exist.
+            if [[ -e /mnt/.openrc ]]; then
                 #statements
                 arch_chroot "rc-update add cupsd default" 2>$ERR
             else
diff --git a/lib/util-desktop.sh b/lib/util-desktop.sh
index 07137af..04495bf 100644
--- a/lib/util-desktop.sh
+++ b/lib/util-desktop.sh
@@ -77,12 +77,12 @@ install_manjaro_de_wm() {
     echo "" > /tmp/.desktop
 
     # DE/WM Menu
-    DIALOG " $_InstDETitle " --radiolist "$_InstDEBody\n\n$_UseSpaceBar" 0 0 12 \
+    DIALOG " $_InstDETitle " --radiolist "\n$_InstManDEBody\n$(evaluate_profiles)\n\n$_UseSpaceBar" 0 0 12 \
       $(echo $PROFILES/{manjaro,community}/* | xargs -n1 | cut -f7 -d'/' | grep -vE "netinstall|architect" | awk '$0=$0" - off"')  2> /tmp/.desktop
 
     # If something has been selected, install
     if [[ $(cat /tmp/.desktop) != "" ]]; then
-        check_for_error "manjaro_de_wm selected: $(cat /tmp/.desktop)"
+        check_for_error "selected: [Manjaro-$(cat /tmp/.desktop)]"
         clear
         # Source the iso-profile
         profile=$(echo $PROFILES/*/$(cat /tmp/.desktop)/profile.conf)
@@ -93,7 +93,8 @@ install_manjaro_de_wm() {
 
         # Parse package list based on user input and remove parts that don't belong to pacman
         cat $PROFILES/shared/Packages-Root "$target_desktop" > /tmp/.edition
-        if [[ -e /tmp/.openrc ]]; then
+        if [[ -e /mnt/.openrc ]]; then
+            evaluate_openrc
             # Remove any packages tagged with >systemd and remove >openrc tags
             sed -i '/>systemd/d' /tmp/.edition
             sed -i 's/>openrc //g' /tmp/.edition
@@ -133,8 +134,10 @@ install_manjaro_de_wm() {
               "2" "minimal" 2>/tmp/.version
 
             if [[ $(cat /tmp/.version) -eq 2 ]]; then
+                check_for_error "selected 'minimal' profile"
                 touch /tmp/.minimal
             else
+                check_for_error "selected 'full' profile"
                 [[ -e /tmp/.minimal ]] && rm /tmp/.minimal
             fi
         fi
@@ -172,6 +175,8 @@ install_manjaro_de_wm() {
             # remove zsh
             sed -i '/^zsh$/d' /tmp/.edition
 
+            check_for_error "packages to install: $(cat /tmp/.edition | tr '\n' ' ')"
+
             # basestrap the parsed package list to the new root
             basestrap -i ${MOUNTPOINT} $(cat /tmp/.edition /usr/share/manjaro-architect/package-lists/input-drivers | sort | uniq) 2>$ERR
             check_for_error "install pkgs: $(cat /tmp/.desktop)" "$?"
@@ -193,7 +198,7 @@ install_manjaro_de_wm() {
             fi
             # Enable services in the chosen profile
             echo "Enabling services"
-            if [[ -e /tmp/.openrc ]]; then
+            if [[ -e /mnt/.openrc ]]; then
                 eval $(grep -e "enable_openrc=" $profile | sed 's/# //g')
                 echo "${enable_openrc[@]}" | xargs -n1 > /tmp/.services
                 echo /mnt/etc/init.d/* | xargs -n1 | cut -d/ -f5 > /tmp/.available_services
@@ -287,7 +292,7 @@ install_manjaro_de_wm_pkg() {
     PROFILES="/usr/share/manjaro-tools/iso-profiles"
     # Only show this information box once
     if [[ $SHOW_ONCE -eq 0 ]]; then
-        DIALOG " $_InstDETitle " --msgbox "$_InstPBody" 0 0
+        DIALOG " $_InstDETitle " --msgbox "\n$_InstPBody\n\n" 0 0
         SHOW_ONCE=1
     fi
     clear
@@ -305,7 +310,7 @@ install_manjaro_de_wm_git() {
     PROFILES="$DATADIR/profiles"
     # Only show this information box once
     if [[ $SHOW_ONCE -eq 0 ]]; then
-        DIALOG " $_InstDETitle " --msgbox "$_InstPBody" 0 0
+        DIALOG " $_InstDETitle " --msgbox "\n$_InstPBody\n\n" 0 0
         SHOW_ONCE=1
     fi
     clear
@@ -325,7 +330,7 @@ install_manjaro_de_wm_git() {
 install_dm() {
     # Save repetition of code
     enable_dm() {
-        if [[ -e /tmp/.openrc ]]; then
+        if [[ -e /mnt/.openrc ]]; then
             sed -i "s/$(grep "DISPLAYMANAGER=" /mnt/etc/conf.d/xdm)/DISPLAYMANAGER=\"$(cat ${PACKAGES})\"/g" /mnt/etc/conf.d/xdm
             arch_chroot "rc-update add xdm default" 2>$ERR
             check_for_error "$FUNCNAME" "$?"
@@ -414,15 +419,15 @@ set_sddm_ck() {
 install_nm() {
     # Save repetition of code
     enable_nm() {
-        # Add openrc support. If openrcbase was installed, the file /tmp/.openrc should exist.
+        # Add openrc support. If openrcbase was installed, the file /mnt/.openrc should exist.
         if [[ $(cat ${PACKAGES}) == "NetworkManager" ]]; then
-            if [[ -e /tmp/.openrc ]]; then
+            if [[ -e /mnt/.openrc ]]; then
             arch_chroot "rc-update add NetworkManager default" 2>$ERR
             else
             arch_chroot "systemctl enable NetworkManager NetworkManager-dispatcher" >/tmp/.symlink 2>$ERR
             fi
         else
-            if [[ -e /tmp/.openrc ]]; then
+            if [[ -e /mnt/.openrc ]]; then
             arch_chroot "rc-update add $(cat ${PACKAGES}) default" 2>$ERR
             else            
             arch_chroot "systemctl enable $(cat ${PACKAGES})" 2>$ERR
diff --git a/lib/util-disk.sh b/lib/util-disk.sh
index c67b6c5..35e5312 100644
--- a/lib/util-disk.sh
+++ b/lib/util-disk.sh
@@ -328,18 +328,18 @@ mount_partitions() {
     mount_current_partition() {
         # Make the mount directory
         mkdir -p ${MOUNTPOINT}${MOUNT} 2>$ERR
+        check_for_error "create mountpoint" "$?"
 
         # Get mounting options for appropriate filesystems
         [[ $fs_opts != "" ]] && mount_opts
 
         # Use special mounting options if selected, else standard mount
         if [[ $(cat ${MOUNT_OPTS}) != "" ]]; then
-            mount -o $(cat ${MOUNT_OPTS}) ${PARTITION} ${MOUNTPOINT}${MOUNT} 2>$ERR
+            mount -o $(cat ${MOUNT_OPTS}) ${PARTITION} ${MOUNTPOINT}${MOUNT} 2>>$LOGFILE
         else
-            mount ${PARTITION} ${MOUNTPOINT}${MOUNT} 2>$ERR
+            mount ${PARTITION} ${MOUNTPOINT}${MOUNT} 2>>$LOGFILE
         fi
-
-        check_for_error "$FUNCNAME" "$?"
+        check_for_error "mount -o $(cat ${MOUNT_OPTS}) ${PARTITION} ${MOUNTPOINT}${MOUNT}"
         confirm_mount ${MOUNTPOINT}${MOUNT}
 
         # Identify if mounted partition is type "crypt" (LUKS on LVM, or LUKS alone)
diff --git a/lib/util-menu.sh b/lib/util-menu.sh
index e0cc709..0dfa4c5 100644
--- a/lib/util-menu.sh
+++ b/lib/util-menu.sh
@@ -46,8 +46,13 @@ main_menu_online() {
             ;;
         *) dialog --backtitle "$VERSION - $SYSTEM ($ARCHI)" --yesno "$_CloseInstBody" 0 0
             if [[ $? -eq 0 ]]; then
+                check_for_error "exit installer."
+                dialog --backtitle "$VERSION - $SYSTEM ($ARCHI)" --yesno "\n$_LogInfo\n" 0 0
+                if [[ $? -eq 0 ]]; then
+                  [[ -e /mnt/.m-a.log ]] && cat ${LOGFILE} >> /mnt/.m-a.log
+                  install -m700 ${LOGFILE} /mnt/.m-a.log
+                fi
                 umount_partitions
-                [[ -e /tmp/.openrc ]] && rm /tmp/.openrc
                 clear
                 exit 0
             fi
@@ -115,6 +120,7 @@ install_base_menu() {
              pacman-key --init
              pacman-key --populate archlinux manjaro
              pacman-key --refresh-keys
+             check_for_error "refresh pacman-keys"
              ;;
         "3") install_base
              ;;
diff --git a/lib/util.sh b/lib/util.sh
index 91fd5d0..44b2768 100644
--- a/lib/util.sh
+++ b/lib/util.sh
@@ -354,7 +354,7 @@ check_mount() {
 
 # Ensure that Manjaro has been installed
 check_base() {
-    if [[ ! -e /tmp/.base_installed ]]; then
+    if [[ ! -e /mnt/.base_installed ]]; then
         DIALOG " $_ErrTitle " --msgbox "$_ErrNoBase" 0 0
         install_base_menu
     fi
@@ -387,10 +387,11 @@ evaluate_profiles() {
 
 # verify if profile is available for openrc
 evaluate_openrc() {
-  if [[ ! $(grep ">openrc" /tmp/.edition) ]]; then
-      DIALOG "Wrong init system" --menu "Profile [$(cat /tmp/.desktop)] is currently not ready for openrc\nPlease adjust your selection:" 0 0 2 \
-        "1" "Select different profile" \
-        "2" "Install systemd base" 2>${ANSWER}
+  if [[ ! $(grep ">openrc" $PROFILES/*/$(cat /tmp/.desktop)/Packages-Desktop) ]]; then
+      DIALOG "$_ErrInit" --menu "\n[Manjaro-$(cat /tmp/.desktop)] $_WarnInit\n" 0 0 2 \
+        "1" "$_DiffPro" \
+        "2" "$_InstSystd" 2>${ANSWER}
+      check_for_error "selected systemd-only profile [$(cat /tmp/.desktop)] with openrc base. -> $(cat ${ANSWER})"
       case $(cat ${ANSWER}) in
           "1") install_desktop_menu
           ;;