* partial tun code refactor
* take out the trash
* move vpn platform code into llarp/vpn/platform.cpp
* fix hive build
* fix win32
* fix memory leak on win32
* reduce cpu use
* make macos compile
* win32 patches:
* use wepoll for zmq
* use all cores on windows iocp read loop
* fix zmq patch for windows
* clean up cmake for win32
* add uninstall before reinstall option to win32 installer
* more ipv6 stuff
* make it compile
* fix up route poker
* remove an unneeded code block in macos wtf
* always use call to system
* fix route poker behavior on macos
* disable ipv6 on windows for now
* cpu perf improvement:
* colease calls to Router::PumpLL to 1 per event loop wakeup
* set up THEN add addresses
* emulate proactor event loop on win32
* remove excessively verbose error message
* fix issue #1499
* exclude uv_poll from win32 so that it can start up
* update logtag to include directory
* create minidump on windows if there was a crash
* make windows happy
* use dmp suffix on minidump files
* typo fix
* address feedback from jason
* use PROJECT_SOURCE_DIR instead of CMAKE_SOURCE_DIR
* quote $@ in apply-patches in case path has spaces in it
* address feedback from tom
* remove llarp/ev/pipe
* add comments for clairification
* make event loop queue size constant named
this fixes the gui bug where it hangs on adding an exit becuase loopback gets routed over the exit.
before it was causing the lmq connection to hang becuase of that route change.
* fix deadlock in #1453
* remove use of shared_lock in profiling
* clean up Save and Load to acquire lock
* bencode and bdecode are now non locking
* remove all places using std::shared_lock
* bail if write fails
* deny message delivery from non registered nodes when whitelist is enabled and applicable
* use DoCallback and return true so that the event gets fired right
* add exit.localhost.loki cname record
* return cname in localhost.loki A/AAAA lookup reply
* correctly handle case where we have no exit
* typofix
* simplify logic
So apparently dnsConfig in Router was never set.
Router::networkConfig was set, but only used in the function
which set it and otherwise only passed to another function once.
dnsConfig was only used in one place.
both member variables have been removed in favor of just
referencing Router::m_Config.
Co-authored-by: Thomas Winget <tewinget@gmail.com>
* llarp::Config constructor can take an empty fs::path now and it will default to fs::current_path
* llarp::ensureConfig now throws on fs error
* updates to daemon/main.cpp to reflect changes to llarp::ensureConfig's new throwability
* dowse parts of the code with holy water for the 0.8.1 tag
* Update how we build libuv
- Update submoduled libuv to latest stable (1.40.0)
- Don't look for a system libuv if we're under BUILD_STATIC_DEPS
- Add a libuv interface library rather than using globals
- Make the windows build fall back to the submodule if not explicitly
given a LIBUV_ROOT
* Replace ${LIBS} global with `base_libs` interface
This simplifies linking and include handling a bit.
* Remove unneeded header
* Add missing csignal header
(This was previously being pulled in incredibly indirectly via some
stuff that eventually includes some other stuff that eventually included
uv.h)
* Use GNUInstallDirs to get lib dir instead of hard-coding lib
Fixes#1429
* enable client relay profiling by default
* macos dns fixes
* improve peer profiling algorithm to track timeouts vs failures
* remove debug ioctl call in tuntap code
* use ub_wait instead of ub_process as that was what was there before
* const correctness
* DRY out checking for SIIT
* typofix
* correct name
* more aggressive path building.
* do more than one in parallel path builds at a time
* correct last commit's logic
* rename numPaths -> numDesiredPaths to clarify intent
* revert string change as it will break a lot
* don't prematurly short circuit on snode builds
Co-authored-by: Thomas Winget <tewinget@gmail.com>
* Should fix some windows service issues
* fix return condition inversion
* Add some Trace level logging
also make the logger actually respect the log level you set.
* event loop should not queue things to itself...
at present, logic thread queue continues until it is empty, so
queueing things onto itself is just wasteful.
* call_later(foreach thing) is better than foreach thing (call later)
also if you already queued those things but they have not happened yet,
there is no sense to queue them to happen again.
* do not queue read on write finish, only on read finish
* failure to start DNS server should be proper startup failure.
without the DNS server working lokinet is...kinda pointless, right?
* format
* don't queue stuff to logic thread if in logic thread
the thing that clears the queue...clears it. So you're just delaying and adding overhead.
* windows unbound thread sleep instead of just busy-waiting
also clang-format decided I can't have a blank line for some reason...
* fix unbound async worker on windows
* add conf.d directory for config overrides
* refactor llarp::Config
* add explicit constructor with datadir as parameter
* have all config files be passed as std::optional
* make Config::LoadDefault private and use std::optional in Config::Load to remove ambiguity
* update rest of codebase to reflect above changes
* fix pybind
* rename bootstrap config skipBootstrap to seednode as it's more descriptive
* make seednode configurable
* make pybind layer compile
* make pybind layer run
If not using an exit, messing with the routing table is not good.
As such, the ability to keep track of routes we *might* want is good,
but the ability to set/unset those routes is necessary, to correspond
to enabling/disabling exit functionality.
* add some dns txt records for stuff we want to expose
* fix txt records
* txt records for snode info
* dont send cname as it mangles the response
* check for 3 parts not 3 characters
* Config file API/comment improvements
API improvements:
=================
Make the config API use position-independent tag parameters (Required,
Default{123}, MultiValue) rather than a sequence of bools with
overloads. For example, instead of:
conf.defineOption<int>("a", "b", false, true, 123, [] { ... });
you now write:
conf.defineOption<int>("a", "b", MultiValue, Default{123}, [] { ... });
The tags are:
- Required
- MultiValue
- Default{value}
plus new abilities (see below):
- Hidden
- RelayOnly
- ClientOnly
- Comment{"line1", "line2", "line3"}
Made option definition more powerful:
=====================================
- `Hidden` allows you to define an option that won't show up in the
generated config file if it isn't set.
- `RelayOnly`/`ClientOnly` sets up an option that is only accepted and
only shows up for relay or client configs. (If neither is specified
the option shows up in both modes).
- `Comment{...}` lets the option comments be specified as part of the
defineOption.
Comment improvements
====================
- Rewrote comments for various options to expand on details.
- Inlined all the comments with the option definitions.
- Several options that were missing comments got comments added.
- Made various options for deprecated and or internal options hidden by
default so that they don't show up in a default config file.
- show the section comment (but not option comments) *after* the
[section] tag instead of before it as it makes more sense that way
(particularly for the [bind] section which has a new long comment to
describe how it works).
Disable profiling by default
============================
We had this weird state where we use and store profiling by default but
never *load* it when starting up. This commit makes us just not use
profiling at all unless explicitly enabled.
Other misc changes:
===================
- change default worker threads to 0 (= num cpus) instead of 1, and fix
it to allow 0.
- Actually apply worker-threads option
- fixed default data-dir value erroneously having quotes around it
- reordered ifname/ifaddr/mapaddr (was previously mapaddr/ifaddr/ifname)
as mapaddr is a sort of specialization of ifaddr and so makes more
sense to come after it (particularly because it now references ifaddr
in its help message).
- removed peer-stats option (since we always require it for relays and
never use it for clients)
- removed router profiles filename option (this doesn't need to be
configurable)
- removed defunct `service-node-seed` option
- Change default logging output file to "" (which means stdout), and
also made "-" work for stdout.
* Router hive compilation fixes
* Comments for SNApp SRV settings in ini file
* Add extra blank line after section comments
* Better deprecated option handling
Allow {client,relay}-only options in {relay,client} configs to be
specified as implicitly deprecated options: they warn, and don't set
anything.
Add an explicit `Deprecated` tag and move deprecated option handling
into definition.cpp.
* Move backwards compat options into section definitions
Keep the "addBackwardsCompatibleConfigOptions" only for options in
sections that no longer exist.
* Fix INI parsing issues & C++17-ify
- don't allow inline comments because it seems they aren't allowed in
ini formats in general, and is going to cause problems if there is a
comment character in a value (e.g. an exit auth string). Additionally
it was breaking on a line such as:
# some comment; see?
because it was treating only `; see?` as the comment and then producing
an error message about the rest of the line being invalid.
- make section parsing stricter: the `[` and `]` have to be at the
beginning at end of the line now (after stripping whitespace).
- Move whitespace stripping to the top since everything in here does it.
- chop off string_view suffix/prefix rather than maintaining position
values
- fix potential infinite loop/segfault when given a line such as `]foo[`
* Make config parsing failure fatal
Load() LogError's and returns false on failure, so we weren't aborting
on config file errors.
* Formatting: allow `{}` for empty functions/structs
Instead of using two lines when empty:
{
}
* Make default dns bind 127.0.0.1 on non-Linux
* Don't show empty section; fix tests
We can conceivably have sections that only make sense for clients or
relays, and so want to completely omit that section if we have no
options for the type of config being generated.
Also fixes missing empty lines between tests.
Co-authored-by: Thomas Winget <tewinget@gmail.com>
If you specify upstream= then you get no upstream, if you give one then
you use that instead of the default, but you can still list multiple.
unbound doesn't support an upstream port, so bail if the user gives a
non-port-53 response.
0.7 supported both public-address and public-ip, but only the former was
being allowed in 0.8.
This makes `public-ip=...` work again, and makes it the canonical option
(because it makes a bit more sense than address when we also have the
public-port parameter), while making `public-address=` accepted with a
deprecation warning.
Also adds default descriptions for port and ip for the generated ini.
