* add exit.localhost.loki cname record
* return cname in localhost.loki A/AAAA lookup reply
* correctly handle case where we have no exit
* typofix
* simplify logic
* Should fix some windows service issues
* fix return condition inversion
* Add some Trace level logging
also make the logger actually respect the log level you set.
* event loop should not queue things to itself...
at present, logic thread queue continues until it is empty, so
queueing things onto itself is just wasteful.
* call_later(foreach thing) is better than foreach thing (call later)
also if you already queued those things but they have not happened yet,
there is no sense to queue them to happen again.
* do not queue read on write finish, only on read finish
* failure to start DNS server should be proper startup failure.
without the DNS server working lokinet is...kinda pointless, right?
* format
* don't queue stuff to logic thread if in logic thread
the thing that clears the queue...clears it. So you're just delaying and adding overhead.
* windows unbound thread sleep instead of just busy-waiting
also clang-format decided I can't have a blank line for some reason...
* fix unbound async worker on windows
* add some dns txt records for stuff we want to expose
* fix txt records
* txt records for snode info
* dont send cname as it mangles the response
* check for 3 parts not 3 characters
* Config file API/comment improvements
API improvements:
=================
Make the config API use position-independent tag parameters (Required,
Default{123}, MultiValue) rather than a sequence of bools with
overloads. For example, instead of:
conf.defineOption<int>("a", "b", false, true, 123, [] { ... });
you now write:
conf.defineOption<int>("a", "b", MultiValue, Default{123}, [] { ... });
The tags are:
- Required
- MultiValue
- Default{value}
plus new abilities (see below):
- Hidden
- RelayOnly
- ClientOnly
- Comment{"line1", "line2", "line3"}
Made option definition more powerful:
=====================================
- `Hidden` allows you to define an option that won't show up in the
generated config file if it isn't set.
- `RelayOnly`/`ClientOnly` sets up an option that is only accepted and
only shows up for relay or client configs. (If neither is specified
the option shows up in both modes).
- `Comment{...}` lets the option comments be specified as part of the
defineOption.
Comment improvements
====================
- Rewrote comments for various options to expand on details.
- Inlined all the comments with the option definitions.
- Several options that were missing comments got comments added.
- Made various options for deprecated and or internal options hidden by
default so that they don't show up in a default config file.
- show the section comment (but not option comments) *after* the
[section] tag instead of before it as it makes more sense that way
(particularly for the [bind] section which has a new long comment to
describe how it works).
Disable profiling by default
============================
We had this weird state where we use and store profiling by default but
never *load* it when starting up. This commit makes us just not use
profiling at all unless explicitly enabled.
Other misc changes:
===================
- change default worker threads to 0 (= num cpus) instead of 1, and fix
it to allow 0.
- Actually apply worker-threads option
- fixed default data-dir value erroneously having quotes around it
- reordered ifname/ifaddr/mapaddr (was previously mapaddr/ifaddr/ifname)
as mapaddr is a sort of specialization of ifaddr and so makes more
sense to come after it (particularly because it now references ifaddr
in its help message).
- removed peer-stats option (since we always require it for relays and
never use it for clients)
- removed router profiles filename option (this doesn't need to be
configurable)
- removed defunct `service-node-seed` option
- Change default logging output file to "" (which means stdout), and
also made "-" work for stdout.
* Router hive compilation fixes
* Comments for SNApp SRV settings in ini file
* Add extra blank line after section comments
* Better deprecated option handling
Allow {client,relay}-only options in {relay,client} configs to be
specified as implicitly deprecated options: they warn, and don't set
anything.
Add an explicit `Deprecated` tag and move deprecated option handling
into definition.cpp.
* Move backwards compat options into section definitions
Keep the "addBackwardsCompatibleConfigOptions" only for options in
sections that no longer exist.
* Fix INI parsing issues & C++17-ify
- don't allow inline comments because it seems they aren't allowed in
ini formats in general, and is going to cause problems if there is a
comment character in a value (e.g. an exit auth string). Additionally
it was breaking on a line such as:
# some comment; see?
because it was treating only `; see?` as the comment and then producing
an error message about the rest of the line being invalid.
- make section parsing stricter: the `[` and `]` have to be at the
beginning at end of the line now (after stripping whitespace).
- Move whitespace stripping to the top since everything in here does it.
- chop off string_view suffix/prefix rather than maintaining position
values
- fix potential infinite loop/segfault when given a line such as `]foo[`
* Make config parsing failure fatal
Load() LogError's and returns false on failure, so we weren't aborting
on config file errors.
* Formatting: allow `{}` for empty functions/structs
Instead of using two lines when empty:
{
}
* Make default dns bind 127.0.0.1 on non-Linux
* Don't show empty section; fix tests
We can conceivably have sections that only make sense for clients or
relays, and so want to completely omit that section if we have no
options for the type of config being generated.
Also fixes missing empty lines between tests.
Co-authored-by: Thomas Winget <tewinget@gmail.com>
* initial relay side lns
* fix typo
* add reserved names and refactor test for dns
* lns name decryption
* all wired up (allegedly)
* refact to use service::EncryptedName for LNS responses to include nonce with ciphertext
* fully rwemove tag_lookup_job
* replace lns cache with DecayingHashTable
* check for lns name validity against the following rules:
* not localhost.loki, loki.loki, or snode.loki
* if it contains no dash then max 32 characters long, not including the .loki tld (and also assuming a leading subdomain has been stripped)
* These are from general DNS requirements, and also enforced in
registrations:
* Must be all [A-Za-z0-9-]. (A-Z will be lower-cased by the RPC call).
* cannot start or end with a -
* max 63 characters long if it does contain a dash
* cannot contain -- in the third and fourth characters unless it starts with xn--
* handle timeout in name lookup job by calling the right handler with std::nullopt
* fix up macos route poker logic
* fix typo
* use string_view
* add forgotten header
* full paths
* add debugging
* catch exception on adding route
* workarround for macos
* typofix
* typofix
* fix for macos
* fix command for macos
* because we autopoke remove explicit route poking in rpc
* probably final fix of macos route poking
* split routes instead of deleting them
* dynamic route poking
* move log statement for introset lookup and dont consider bad sessions as able to send
* send convotag reset frame when we have no session
* add exit map to rpc
* use split_any
* update loki-mq submodule for tuple support
* srv record reply implementation
still need to encode srv records into intro sets / router contacts
as well as decode from them and match against queried service.proto
* inverted condition fix in config code
* SRV record struct (de-)serialization for intro sets
* parsing and using srv records from config (for/in introsets)
* adopt str utils from core and use for srv parsing
* changes to repeat requests
no longer drop repeat requests on the floor, but do not make
an *actual* request for them if one is in progress.
do not call reply hook for each reply for a request, as
each userland request is actually made into several lokinet
requests and this would result in duplicate replies.
* fetch SRVs from introsets for .loki
* make format
* dns and srv fixes, srv appears to be working
* use exceptions when fetching identity key instead of std::optional, will throw on fail
* fix up config options for endpoint auth and add better docs
* add llarp::serive::AuthType enum for controlling what kind of endpoint auth to use
* rework net code for ip ranges to be cleaner
* clean up endpoint auth code
* refactor config to validate network configs before setting up endpoints
* remove buildone from path/pathbuilder.cpp so we don't spam connection attempts
It was a workaround for pre-C++17 std::string which didn't support
passing a string_view to various functions/operators. There's only one
place left that needs an explicit conversion, and that's where it is
used as a map key; so just be explicit there and remove llarp::str()
everywhere else.
- Move IPRange into its own net/ip_range.hpp
- Move the static net::IPPacket::TruncateV6, etc. functions to free
net::TruncateV6, etc. functions (now from net/ip.hpp instead of
net/ip_packet.hpp).
- Make net::TruncateV6 and net::ExpandV4 constexpr.
- Add IPRange::FromIPv4 factory function (to replace the iprange_ipv4
free function)
Rename net/ip.{cpp,hpp} to net/ip_packet.{cpp,hpp}.
(Doing this in two commits because I want to repurpose ip.hpp/ip.cpp,
and want git to figure out the history properly).
llarp/config/config.cpp:
respect [network]:type option
llarp/handlers/exit.cpp:
when [network]:type is null dont init tun interface
llarp/service/context.cpp:
respect [network]:type option
change endpoint name back to "default"
llarp/tooling/router_hive.cpp:
dont use LogicCall for obtaining RCs from underlying relays, it crashes the mainloop and it's probably safe to readonly access RCs.
pybind/common.hpp:
remove typecasters as we use C++17 now
pybind/llarp/config.cpp:
remove SnappConfig
wire up NetworkConfig
pybind/llarp/handlers/pyhandler.hpp:
remove SnappConfig from constructor
pybind/llarp/handlers/pyhandler.cpp:
update constructor implementation to match header
test/hive/hive.py:
remove broke endpoint related code
wire up null endpoint option using NetworkConfig
use index at 0 for relays and clients instead of 1
dont add a python endpoint to all clients
This commit reflects changes to clang-format rules. Unfortunately,
these rule changes create a massive change to the codebase, which
causes an apparent rewrite of git history.
Git blame's --ignore-rev flag can be used to ignore this commit when
attempting to `git blame` some code.
The logic here wasn't quite right and was returning an A record in
response to an AAAA lookup.
This returns nothing, which is better, but not quite enough: this gives
empty responses, which produces warnings in host/dig.
