Lots and lots of places in the code had broken < operators because they
are returning something like:
foo < other.foo or bar < other.bar;
but this breaks both the strict weak ordering requirements that are
required for the "Compare" requirement for things like
std::map/set/priority_queue.
For example:
a = {.foo=1, .bar=3}
b = {.foo=3, .bar=1}
does not have an ordering over a and b (both `a < b` and `b < a` are
satisfied at the same time).
This needs to be instead something like:
foo < other.foo or (foo == other.foo and bar < other.bar)
but that's a bit clunkier, and it is easier to use std::tie for tuple's
built-in < comparison which does the right thing:
std::tie(foo, bar) < std::tie(other.foo, other.bar)
(Initially I noticed this in SockAddr/sockaddr_in6, but upon further
investigation this extends to the major of multi-field `operator<`'s.)
This fixes it by using std::tie (or something similar) everywhere we are
doing multi-field inequalities.
Replaces custom logging system with spdlog-based oxen logging. This
commit mainly replaces the backend logging with the spdlog-based system,
but doesn't (yet) convert all the existing LogWarn, etc. to use the new
format-based logging.
New logging statements will look like:
llarp::log::warning(cat, "blah: {}", val);
where `cat` should be set up in each .cpp or cluster of .cpp files, as
described in the oxen-logging README.
As part of spdlog we get fmt, which gives us nice format strings, where
are applied generously in this commit.
Making types printable now requires two steps:
- add a ToString() method
- add this specialization:
template <>
constexpr inline bool llarp::IsToStringFormattable<llarp::Whatever> = true;
This will then allow the type to be printed as a "{}" value in a
fmt::format string. This is applied to all our printable types here,
and all of the `operator<<` are removed.
This commit also:
- replaces various uses of `operator<<` to ToString()
- replaces various uses of std::stringstream with either fmt::format or
plain std::string
- Rename some to_string and toString() methods to ToString() for
consistency (and to work with fmt)
- Replace `stringify(...)` and `make_exception` usage with fmt::format
(and remove stringify/make_exception from util/str.hpp).
if a pending inbound session did not complete a handshake after an unclean close from a previous session the
remote udp endpoint would remain stuck mapped as authed and thus any further attempts from the remote would
be silently dropped as it entered a stuck state in the state machine. this was happening as a small part
of the state machine was hidden in the implementation details of iwp, but instead should be in the super type
as it is logic exclusively outside the details which every dialect would have regardless of its details.
this commit will unmap the udp endpoint every time it needs to in the link layer state machine, independat of
the implementation details of the diact.
only send close packet once, before we were sending a close after we got a close causing excess log spam.
include handshake phase when checking for connection timeouts.
when we change our rc make sure to put it into nodedb too when we are a service node to prevent weirdness in dht lookups.
We have a few cases where we're making an extra shared_ptr which we copy
into a lambda, which then results in an extra unnecessary refcount
decrement in the parent; this changes them to give an rvalue reference
to the lambda to avoid the extra incr/decr instead.
The one in Session::Pump is particularly noticeable and shows up in
profiling.
We trigger a pump immediately, but this is racey because we add to our
plaintext data in a worker thread; if the worker thread runs after the
pump then it ends up leaving plaintext to be handled, but there's no
wakeup until the next one.
This was the cause of seeing a random +1s and bunching added to ping
responses sometimes: it wasn't until the *next* ping goes through the
network that the plaintext queue gets processed, at which point it
flushes the old one and often the new one together.
The fix here gets rid of the map of sessions needing wakeups and instead
adds an atomic flag to all of them to let us figure out which ones
need to be flushed.
* llarp::service::NameIsValid was not checking that the tld was .loki, add this check.
* make link layer initial connection timeout 5s not the session activity timeout which happens to be 60 god damn seconds.
All #ifndef guards on headers have been removed, I think,
in favor of #pragma once
Headers are now included as `#include "filename"` if the included file
resides in the same directory as the file including it, or any
subdirectory therein. Otherwise they are included as
`#include <project/top/dir/relative/path/filename>`
The above does not include system/os headers.
- removes all the llarp_ev_* functions, replacing with methods/classes/functions in the llarp
namespace.
- banish ev/ev.h to the void
- Passes various things by const lvalue ref, especially shared_ptr's that don't need to be copied
(to avoid an atomic refcount increment/decrement).
- Add a llarp::UDPHandle abstract class for UDP handling
- Removes the UDP tick handler; code that needs tick can just do a separate handler on the event
loop outside the UDP socket.
- Adds an "OwnedBuffer" which owns its own memory but is implicitly convertible to a llarp_buffer_t.
This is mostly needed to take over ownership of buffers from uvw without copying them as,
currently, uvw does its own allocation (pending some open upstream issues/PRs).
- Logic:
- add `make_caller`/`call_forever`/`call_every` utility functions to abstract Call wrapping and
dependent timed tasks.
- Add inLogicThread() so that code can tell its inside the logic thread (typically for
debugging assertions).
- get rid of janky integer returns and dealing with cancellations on call_later: the other methods
added here and the event loop code remove the need for them.
- Event loop:
- redo everything with uvw instead of libuv
- rename EventLoopWakeup::Wakeup to EventLoopWakeup::Trigger to better reflect what it does.
- add EventLoopRepeater for repeated events, and replace the code that reschedules itself every
time it is called with a repeater.
- Split up `EventLoop::run()` into a non-virtual base method and abstract `run_loop()` methods;
the base method does a couple extra setup/teardown things that don't need to be in the derived class.
- udp_listen is replaced with ev->udp(...) which returns a new UDPHandle object rather that
needing gross C-style-but-not-actually-C-compatible structs.
- Remove unused register_poll_fd_(un)readable
- Use shared_ptr for EventLoopWakeup rather than returning a raw pointer; uvw lets us not have to
worry about having the event loop class maintain ownership of it.
- Add factory EventLoop::create() function to create a default (uvw-based) event loop (previously
this was one of the llarp_ev_blahblah unnamespaced functions).
- ev_libuv: this is mostly rewritten; all of the glue code/structs, in particular, are gone as
they are no longer needed with uvw.
- DNS:
- Rename DnsHandler to DnsInterceptor to better describe what it does (this is the code that
intercepts all DNS to the tun IP range for Android).
- endpoint:
- remove unused "isolated network" code
- remove distinct (but actually always the same) variables for router/endpoint logic objects
- llarp_buffer_t
- make constructors type-safe against being called with points to non-size-1 values
- tun packet reading:
- read all available packets off the device/file descriptor; previously we were reading one packet
at a time then returning to the event loop to poll again.
- ReadNextPacket() now returns a 0-size packet if the read would block (so that we can implement
the previous point).
- ReadNextPacket() now throws on I/O error
- Miscellaneous code cleanups/simplifications
when retransmissions happen, they will be executed in a deterministic order by their delivery id.
this reduces the jitter from delayed message delivery on link layer as with an unordered map the order of iteration is "random",
so when we iterate all messages for retransmission we do it lowest id first (the messages queued first).
* Config file API/comment improvements
API improvements:
=================
Make the config API use position-independent tag parameters (Required,
Default{123}, MultiValue) rather than a sequence of bools with
overloads. For example, instead of:
conf.defineOption<int>("a", "b", false, true, 123, [] { ... });
you now write:
conf.defineOption<int>("a", "b", MultiValue, Default{123}, [] { ... });
The tags are:
- Required
- MultiValue
- Default{value}
plus new abilities (see below):
- Hidden
- RelayOnly
- ClientOnly
- Comment{"line1", "line2", "line3"}
Made option definition more powerful:
=====================================
- `Hidden` allows you to define an option that won't show up in the
generated config file if it isn't set.
- `RelayOnly`/`ClientOnly` sets up an option that is only accepted and
only shows up for relay or client configs. (If neither is specified
the option shows up in both modes).
- `Comment{...}` lets the option comments be specified as part of the
defineOption.
Comment improvements
====================
- Rewrote comments for various options to expand on details.
- Inlined all the comments with the option definitions.
- Several options that were missing comments got comments added.
- Made various options for deprecated and or internal options hidden by
default so that they don't show up in a default config file.
- show the section comment (but not option comments) *after* the
[section] tag instead of before it as it makes more sense that way
(particularly for the [bind] section which has a new long comment to
describe how it works).
Disable profiling by default
============================
We had this weird state where we use and store profiling by default but
never *load* it when starting up. This commit makes us just not use
profiling at all unless explicitly enabled.
Other misc changes:
===================
- change default worker threads to 0 (= num cpus) instead of 1, and fix
it to allow 0.
- Actually apply worker-threads option
- fixed default data-dir value erroneously having quotes around it
- reordered ifname/ifaddr/mapaddr (was previously mapaddr/ifaddr/ifname)
as mapaddr is a sort of specialization of ifaddr and so makes more
sense to come after it (particularly because it now references ifaddr
in its help message).
- removed peer-stats option (since we always require it for relays and
never use it for clients)
- removed router profiles filename option (this doesn't need to be
configurable)
- removed defunct `service-node-seed` option
- Change default logging output file to "" (which means stdout), and
also made "-" work for stdout.
* Router hive compilation fixes
* Comments for SNApp SRV settings in ini file
* Add extra blank line after section comments
* Better deprecated option handling
Allow {client,relay}-only options in {relay,client} configs to be
specified as implicitly deprecated options: they warn, and don't set
anything.
Add an explicit `Deprecated` tag and move deprecated option handling
into definition.cpp.
* Move backwards compat options into section definitions
Keep the "addBackwardsCompatibleConfigOptions" only for options in
sections that no longer exist.
* Fix INI parsing issues & C++17-ify
- don't allow inline comments because it seems they aren't allowed in
ini formats in general, and is going to cause problems if there is a
comment character in a value (e.g. an exit auth string). Additionally
it was breaking on a line such as:
# some comment; see?
because it was treating only `; see?` as the comment and then producing
an error message about the rest of the line being invalid.
- make section parsing stricter: the `[` and `]` have to be at the
beginning at end of the line now (after stripping whitespace).
- Move whitespace stripping to the top since everything in here does it.
- chop off string_view suffix/prefix rather than maintaining position
values
- fix potential infinite loop/segfault when given a line such as `]foo[`
* Make config parsing failure fatal
Load() LogError's and returns false on failure, so we weren't aborting
on config file errors.
* Formatting: allow `{}` for empty functions/structs
Instead of using two lines when empty:
{
}
* Make default dns bind 127.0.0.1 on non-Linux
* Don't show empty section; fix tests
We can conceivably have sections that only make sense for clients or
relays, and so want to completely omit that section if we have no
options for the type of config being generated.
Also fixes missing empty lines between tests.
Co-authored-by: Thomas Winget <tewinget@gmail.com>
* route poking:
* remove popen() call, replace with reading /proc/net/route for getting default route
* dynamically poke and unpoke routes on runtime
* swap intros and fix rpc endpoint for version to return what the ui expects
* use std::string::find_first_not_of instead of using a lambda
