* add lokinet_add_bootstrap_rc function for adding an rc from memory
* prevent stack overflow on error closing connection in quic
* add in memory nodedb
* refactor how convotags are set as active
* add initial stubs for endpoint statistics
* refactor time stuff to be a bit cleaner
* update lnproxy script with more arguments
Refactors how quic packets get handled: the actual tunnels now live in
tunnel.hpp's TunnelManager which holds and manages all the quic<->tcp
tunnelling. service::Endpoint now holds a TunnelManager rather than a
quic::Server. We only need one quic server, but we need a separate quic
client instance per outgoing quic tunnel, and TunnelManager handles all
that glue now.
Adds QUIC packet handling to get to the right tunnel code. This
required multiplexing incoming quic packets, as follows:
Adds a very small quic tunnel packet header of 4 bytes:
[1, SPORT, ECN] for client->server packets, where SPORT is our
source "port" (really: just a uint16_t unique quic instance
identifier)
or
[2, DPORT, ECN] for server->client packets where the DPORT is the SPORT
from above.
(This also reworks ECN bits to get properly carried over lokinet.)
We don't need a destination/source port for the server-side because
there is only ever one quic server (and we know we're going to it when
the first byte of the header is 1).
Removes the config option for quic exposing ports; a full lokinet will
simply accept anything incoming on quic and tunnel it to the requested
port on the the local endpoint IP (this handler will come in a following
commit).
Replace ConvoTags with full addresses: we need to carry the port, as
well, which the ConvoTag can't give us, so change those to more general
SockAddrs from which we can extract both the ConvoTag *and* the port.
Add a pending connection queue along with new quic-side handlers to call
when a stream becomes available (TunnelManager uses this to wire up
pending incoming conns with quic streams as streams open up).
Completely get rid of tunnel_server/tunnel_client.cpp code; it is now
moved to tunnel.hpp.
Add listen()/forget() methods in TunnelManager for setting up quic
listening sockets (for liblokinet usage).
Add open()/close() methods in TunnelManager for spinning up new quic
clients for outgoing quic connections.
* add ip6-range option to network section to control which range we want to use for ipv6 traffic
* make ip6-range able to disable ipv6 exits ( i dont like this but eh )
All #ifndef guards on headers have been removed, I think,
in favor of #pragma once
Headers are now included as `#include "filename"` if the included file
resides in the same directory as the file including it, or any
subdirectory therein. Otherwise they are included as
`#include <project/top/dir/relative/path/filename>`
The above does not include system/os headers.
- Previous android java and jni code updated to work, but with much love
still needed to make it work nicely, e.g. handling when the VPN is
turned off.
- DNS handling refactored to allow android to intercept and handle DNS
requests as we can't set the system DNS to use a high port
(and apparently Chrome ignores system DNS settings anyway)
- add packet router structure to allow separate handling of specific
intercepted traffic, e.g. UDP traffic to port 53 gets handled by our
DNS handler rather than being naively forwarded as exit traffic.
- For now, android lokinet is exit-only and hard-coded to use exit.loki
as its exit. The exit will be configurable before release, but
allowing to not use exit-only mode is more of a challenge.
- some old gitignore remnants which were matching to things we don't
want them to (and are no longer relevant) removed
- some minor changes to CI configuration
* bump zmq static dep
* lokimq -> oxenmq
* llarp_nodedb -> llarp::NodeDB
* remove all crufty api parts of NodeDB
* make NodeDB rc selection api not suck
* make path builder api not suck
* propagate all above changes so that unit tests work and it all compiles
* llarp::Config constructor can take an empty fs::path now and it will default to fs::current_path
* llarp::ensureConfig now throws on fs error
* updates to daemon/main.cpp to reflect changes to llarp::ensureConfig's new throwability
* dowse parts of the code with holy water for the 0.8.1 tag
* enable client relay profiling by default
* macos dns fixes
* improve peer profiling algorithm to track timeouts vs failures
* remove debug ioctl call in tuntap code
* use ub_wait instead of ub_process as that was what was there before
* const correctness
* DRY out checking for SIIT
* typofix
* correct name
* add conf.d directory for config overrides
* refactor llarp::Config
* add explicit constructor with datadir as parameter
* have all config files be passed as std::optional
* make Config::LoadDefault private and use std::optional in Config::Load to remove ambiguity
* update rest of codebase to reflect above changes
* fix pybind
* rename bootstrap config skipBootstrap to seednode as it's more descriptive
* make seednode configurable
* make pybind layer compile
* make pybind layer run
* Config file API/comment improvements
API improvements:
=================
Make the config API use position-independent tag parameters (Required,
Default{123}, MultiValue) rather than a sequence of bools with
overloads. For example, instead of:
conf.defineOption<int>("a", "b", false, true, 123, [] { ... });
you now write:
conf.defineOption<int>("a", "b", MultiValue, Default{123}, [] { ... });
The tags are:
- Required
- MultiValue
- Default{value}
plus new abilities (see below):
- Hidden
- RelayOnly
- ClientOnly
- Comment{"line1", "line2", "line3"}
Made option definition more powerful:
=====================================
- `Hidden` allows you to define an option that won't show up in the
generated config file if it isn't set.
- `RelayOnly`/`ClientOnly` sets up an option that is only accepted and
only shows up for relay or client configs. (If neither is specified
the option shows up in both modes).
- `Comment{...}` lets the option comments be specified as part of the
defineOption.
Comment improvements
====================
- Rewrote comments for various options to expand on details.
- Inlined all the comments with the option definitions.
- Several options that were missing comments got comments added.
- Made various options for deprecated and or internal options hidden by
default so that they don't show up in a default config file.
- show the section comment (but not option comments) *after* the
[section] tag instead of before it as it makes more sense that way
(particularly for the [bind] section which has a new long comment to
describe how it works).
Disable profiling by default
============================
We had this weird state where we use and store profiling by default but
never *load* it when starting up. This commit makes us just not use
profiling at all unless explicitly enabled.
Other misc changes:
===================
- change default worker threads to 0 (= num cpus) instead of 1, and fix
it to allow 0.
- Actually apply worker-threads option
- fixed default data-dir value erroneously having quotes around it
- reordered ifname/ifaddr/mapaddr (was previously mapaddr/ifaddr/ifname)
as mapaddr is a sort of specialization of ifaddr and so makes more
sense to come after it (particularly because it now references ifaddr
in its help message).
- removed peer-stats option (since we always require it for relays and
never use it for clients)
- removed router profiles filename option (this doesn't need to be
configurable)
- removed defunct `service-node-seed` option
- Change default logging output file to "" (which means stdout), and
also made "-" work for stdout.
* Router hive compilation fixes
* Comments for SNApp SRV settings in ini file
* Add extra blank line after section comments
* Better deprecated option handling
Allow {client,relay}-only options in {relay,client} configs to be
specified as implicitly deprecated options: they warn, and don't set
anything.
Add an explicit `Deprecated` tag and move deprecated option handling
into definition.cpp.
* Move backwards compat options into section definitions
Keep the "addBackwardsCompatibleConfigOptions" only for options in
sections that no longer exist.
* Fix INI parsing issues & C++17-ify
- don't allow inline comments because it seems they aren't allowed in
ini formats in general, and is going to cause problems if there is a
comment character in a value (e.g. an exit auth string). Additionally
it was breaking on a line such as:
# some comment; see?
because it was treating only `; see?` as the comment and then producing
an error message about the rest of the line being invalid.
- make section parsing stricter: the `[` and `]` have to be at the
beginning at end of the line now (after stripping whitespace).
- Move whitespace stripping to the top since everything in here does it.
- chop off string_view suffix/prefix rather than maintaining position
values
- fix potential infinite loop/segfault when given a line such as `]foo[`
* Make config parsing failure fatal
Load() LogError's and returns false on failure, so we weren't aborting
on config file errors.
* Formatting: allow `{}` for empty functions/structs
Instead of using two lines when empty:
{
}
* Make default dns bind 127.0.0.1 on non-Linux
* Don't show empty section; fix tests
We can conceivably have sections that only make sense for clients or
relays, and so want to completely omit that section if we have no
options for the type of config being generated.
Also fixes missing empty lines between tests.
Co-authored-by: Thomas Winget <tewinget@gmail.com>
If you specify upstream= then you get no upstream, if you give one then
you use that instead of the default, but you can still list multiple.
unbound doesn't support an upstream port, so bail if the user gives a
non-port-53 response.
0.7 supported both public-address and public-ip, but only the former was
being allowed in 0.8.
This makes `public-ip=...` work again, and makes it the canonical option
(because it makes a bit more sense than address when we also have the
public-port parameter), while making `public-address=` accepted with a
deprecation warning.
Also adds default descriptions for port and ip for the generated ini.
* serialize auth codes in rpc
* format
* format
* config and route fixups
* bump lokimq
* fix compile
* discard unknown members in service keys
* format
* Add ignored [dns]no-resolvconf option for deb backwards compat
The debs hack a `#no-resolvconf=1` into the config file in 0.7 to allow
a user to disable resolvconf setup during startup by uncommenting it.
That doesn't work anymore since 0.8 errors on invalid config options, so
add it as an ignored option so that 0.7 deb config files can still be
compatible.
* Fix `[dns]upstream` comment not being produced in generated conf file
* fix test
Co-authored-by: Jeff <jeff@i2p.rocks>