- Previous android java and jni code updated to work, but with much love
still needed to make it work nicely, e.g. handling when the VPN is
turned off.
- DNS handling refactored to allow android to intercept and handle DNS
requests as we can't set the system DNS to use a high port
(and apparently Chrome ignores system DNS settings anyway)
- add packet router structure to allow separate handling of specific
intercepted traffic, e.g. UDP traffic to port 53 gets handled by our
DNS handler rather than being naively forwarded as exit traffic.
- For now, android lokinet is exit-only and hard-coded to use exit.loki
as its exit. The exit will be configurable before release, but
allowing to not use exit-only mode is more of a challenge.
- some old gitignore remnants which were matching to things we don't
want them to (and are no longer relevant) removed
- some minor changes to CI configuration
* bump zmq static dep
* lokimq -> oxenmq
* llarp_nodedb -> llarp::NodeDB
* remove all crufty api parts of NodeDB
* make NodeDB rc selection api not suck
* make path builder api not suck
* propagate all above changes so that unit tests work and it all compiles
* add conf.d directory for config overrides
* refactor llarp::Config
* add explicit constructor with datadir as parameter
* have all config files be passed as std::optional
* make Config::LoadDefault private and use std::optional in Config::Load to remove ambiguity
* update rest of codebase to reflect above changes
* fix pybind
* rename bootstrap config skipBootstrap to seednode as it's more descriptive
* make seednode configurable
* make pybind layer compile
* make pybind layer run
* Config file API/comment improvements
API improvements:
=================
Make the config API use position-independent tag parameters (Required,
Default{123}, MultiValue) rather than a sequence of bools with
overloads. For example, instead of:
conf.defineOption<int>("a", "b", false, true, 123, [] { ... });
you now write:
conf.defineOption<int>("a", "b", MultiValue, Default{123}, [] { ... });
The tags are:
- Required
- MultiValue
- Default{value}
plus new abilities (see below):
- Hidden
- RelayOnly
- ClientOnly
- Comment{"line1", "line2", "line3"}
Made option definition more powerful:
=====================================
- `Hidden` allows you to define an option that won't show up in the
generated config file if it isn't set.
- `RelayOnly`/`ClientOnly` sets up an option that is only accepted and
only shows up for relay or client configs. (If neither is specified
the option shows up in both modes).
- `Comment{...}` lets the option comments be specified as part of the
defineOption.
Comment improvements
====================
- Rewrote comments for various options to expand on details.
- Inlined all the comments with the option definitions.
- Several options that were missing comments got comments added.
- Made various options for deprecated and or internal options hidden by
default so that they don't show up in a default config file.
- show the section comment (but not option comments) *after* the
[section] tag instead of before it as it makes more sense that way
(particularly for the [bind] section which has a new long comment to
describe how it works).
Disable profiling by default
============================
We had this weird state where we use and store profiling by default but
never *load* it when starting up. This commit makes us just not use
profiling at all unless explicitly enabled.
Other misc changes:
===================
- change default worker threads to 0 (= num cpus) instead of 1, and fix
it to allow 0.
- Actually apply worker-threads option
- fixed default data-dir value erroneously having quotes around it
- reordered ifname/ifaddr/mapaddr (was previously mapaddr/ifaddr/ifname)
as mapaddr is a sort of specialization of ifaddr and so makes more
sense to come after it (particularly because it now references ifaddr
in its help message).
- removed peer-stats option (since we always require it for relays and
never use it for clients)
- removed router profiles filename option (this doesn't need to be
configurable)
- removed defunct `service-node-seed` option
- Change default logging output file to "" (which means stdout), and
also made "-" work for stdout.
* Router hive compilation fixes
* Comments for SNApp SRV settings in ini file
* Add extra blank line after section comments
* Better deprecated option handling
Allow {client,relay}-only options in {relay,client} configs to be
specified as implicitly deprecated options: they warn, and don't set
anything.
Add an explicit `Deprecated` tag and move deprecated option handling
into definition.cpp.
* Move backwards compat options into section definitions
Keep the "addBackwardsCompatibleConfigOptions" only for options in
sections that no longer exist.
* Fix INI parsing issues & C++17-ify
- don't allow inline comments because it seems they aren't allowed in
ini formats in general, and is going to cause problems if there is a
comment character in a value (e.g. an exit auth string). Additionally
it was breaking on a line such as:
# some comment; see?
because it was treating only `; see?` as the comment and then producing
an error message about the rest of the line being invalid.
- make section parsing stricter: the `[` and `]` have to be at the
beginning at end of the line now (after stripping whitespace).
- Move whitespace stripping to the top since everything in here does it.
- chop off string_view suffix/prefix rather than maintaining position
values
- fix potential infinite loop/segfault when given a line such as `]foo[`
* Make config parsing failure fatal
Load() LogError's and returns false on failure, so we weren't aborting
on config file errors.
* Formatting: allow `{}` for empty functions/structs
Instead of using two lines when empty:
{
}
* Make default dns bind 127.0.0.1 on non-Linux
* Don't show empty section; fix tests
We can conceivably have sections that only make sense for clients or
relays, and so want to completely omit that section if we have no
options for the type of config being generated.
Also fixes missing empty lines between tests.
Co-authored-by: Thomas Winget <tewinget@gmail.com>
* initial work for RC SRVs.
Needs tests for new RC format.
Needs SRVs added to new RC, and associated tests.
* convert rc sign/verify test to catch2, add test for new rc
Also fixes a mistake in new rc serialization
* bump loki-mq submodule
need support for viewing bt deserialize consumer buffer so we
know how much it has consumed.
* fix some behavior errors
need to advance llarp_buffer_t after consuming data from it
only rewind and modify size of llarp_buffer_t in owning context.
* Add test for router contact (de-)serialization
Adds a test that makes a list of RouterContact with mixed
versions and ensures it serializes and deserializes correctly.
* Add ignored [dns]no-resolvconf option for deb backwards compat
The debs hack a `#no-resolvconf=1` into the config file in 0.7 to allow
a user to disable resolvconf setup during startup by uncommenting it.
That doesn't work anymore since 0.8 errors on invalid config options, so
add it as an ignored option so that 0.7 deb config files can still be
compatible.
* Fix `[dns]upstream` comment not being produced in generated conf file
* fix test
Co-authored-by: Jeff <jeff@i2p.rocks>
* initial relay side lns
* fix typo
* add reserved names and refactor test for dns
* lns name decryption
* all wired up (allegedly)
* refact to use service::EncryptedName for LNS responses to include nonce with ciphertext
* fully rwemove tag_lookup_job
* replace lns cache with DecayingHashTable
* check for lns name validity against the following rules:
* not localhost.loki, loki.loki, or snode.loki
* if it contains no dash then max 32 characters long, not including the .loki tld (and also assuming a leading subdomain has been stripped)
* These are from general DNS requirements, and also enforced in
registrations:
* Must be all [A-Za-z0-9-]. (A-Z will be lower-cased by the RPC call).
* cannot start or end with a -
* max 63 characters long if it does contain a dash
* cannot contain -- in the third and fourth characters unless it starts with xn--
* handle timeout in name lookup job by calling the right handler with std::nullopt
* route poking:
* remove popen() call, replace with reading /proc/net/route for getting default route
* dynamically poke and unpoke routes on runtime
* swap intros and fix rpc endpoint for version to return what the ui expects
* use std::string::find_first_not_of instead of using a lambda
These variables need to persist past the end of the lambda and weren't;
release builds didn't seem to mind access the freed memory, but Debug
builds triggered failures.
* rework net code for ip ranges to be cleaner
* clean up endpoint auth code
* refactor config to validate network configs before setting up endpoints
* remove buildone from path/pathbuilder.cpp so we don't spam connection attempts
It was a workaround for pre-C++17 std::string which didn't support
passing a string_view to various functions/operators. There's only one
place left that needs an explicit conversion, and that's where it is
used as a map key; so just be explicit there and remove llarp::str()
everywhere else.
This replaces all use of std::optional's `opt.value()` with `*opt`
because macOS is great and the ghost of Steve Jobs says that actually
supporting std::optional's value() method is not for chumps before macOS
10.14. So don't use it because Apple is great.
Pretty much all of our use of it actually is done better with operator*
anyway (since operator* doesn't do a check that the optional has a
value).
Also replaced *most* of the `has_value()` calls with direct bool
context, except for one in the config section which looked really
confusing at a glance without a has_value().
- Move IPRange into its own net/ip_range.hpp
- Move the static net::IPPacket::TruncateV6, etc. functions to free
net::TruncateV6, etc. functions (now from net/ip.hpp instead of
net/ip_packet.hpp).
- Make net::TruncateV6 and net::ExpandV4 constexpr.
- Add IPRange::FromIPv4 factory function (to replace the iprange_ipv4
free function)
Refactors many things in cmake to improve and simplify:
- don't use variable indirection for target names; target names are
*already* a variable of sorts. (e.g. ${UTIL_LIB} is now just
lokinet-util). cmake/basic_definitions.cmake is now gone.
- fix LTO enabling to use the standard cmake (3.9+) LTO mechanism rather
than shoving a bunch of flag hacks through link_libraries and
add_compile_options. This also now enables LTO when building a shared
library (because previously the -flto hacks were only turned on in the
static code for some reason).
- build liblokinet as *either* shared library or static library, but not
both. Building both makes things more complicated because they had
different names (lokinet-shared or lokinet-static) and seems pointless:
you generally want one or the other. Now there is just the liblokinet
target, which will be shared or static depending on the value of
BUILD_SHARED_LIBS.
- Simplify lokinet-cryptography AVX2 code: just build *one* library, and
add in the additional AVX2 files when possible, rather than building two
and needing to merge them.
- Compress STATIC_LINK and STATIC_LINK_RUNTIME into just STATIC_LINK.
It makes no sense to use one of these (_RUNTIME) on Windows and the
other on non-Windows when they appear to try to do the same thing.
- remove a bunch of annotations from `endif(FOO)` -> `endif()`.
- move all the tuntap compilation code (including OS-specific source
file selection) into vendor/CMakeLists.txt and build tuntap as an
intermediate OBJECT library rather than keeping a global variable in 5
different files.
- move release motto define to root cmake; it made no sense being
duplicated in both unix.cmake and win32.cmake
- fix add_log_tag to not stomp on any existing source compile flags with
its definition. Also use proper compile definition property instead of
cramming it into compile flags.
- make optimization/linker flags less hacky. There's no reason for us
to force particular optimization flags because the cmake build type
already does that (e.g. -DCMAKE_BUILD_TYPE=Release does -O3). Not doing
that also silences a bunch of cmake warnings because it thinks "-O0 -g3"
etc. are link libraries (which is reasonable: that's what the code was
telling cmake they are).
- sets the default build type to RelWithDebInfo which gives us `-O2 -g`
if you don't specify a build type.
- Move PIC up (so that the things loaded in unix.cmake, notably libuv,
have it set).
- Add a custom `curl` interface library that carries the correct link
target and include paths for curl (system or bundled).
llarp/config/config.cpp:
respect [network]:type option
llarp/handlers/exit.cpp:
when [network]:type is null dont init tun interface
llarp/service/context.cpp:
respect [network]:type option
change endpoint name back to "default"
llarp/tooling/router_hive.cpp:
dont use LogicCall for obtaining RCs from underlying relays, it crashes the mainloop and it's probably safe to readonly access RCs.
pybind/common.hpp:
remove typecasters as we use C++17 now
pybind/llarp/config.cpp:
remove SnappConfig
wire up NetworkConfig
pybind/llarp/handlers/pyhandler.hpp:
remove SnappConfig from constructor
pybind/llarp/handlers/pyhandler.cpp:
update constructor implementation to match header
test/hive/hive.py:
remove broke endpoint related code
wire up null endpoint option using NetworkConfig
use index at 0 for relays and clients instead of 1
dont add a python endpoint to all clients
lyyn
Jeff Becker
Thomas Winget
Jason Rhinelander
Stephen Shelton
Rick V