lnav/docs/source/ui.rst

.. _ui:

User Interface
==============

The **lnav** TUI displays the content of the current "view" in the middle,
with status bars above and below, and the interactive prompt as the last line.

.. figure:: lnav-ui.png
   :align: center
   :alt: Screenshot of lnav showing a mix of syslog and web access_log messages.

   Screenshot of **lnav** viewing syslog and web access_log messages.

The default view shows the log messages from the log files that have been
loaded.  There are other views for displaying content like plaintext files
and SQL results.  The :ref:`ui_views` section describes the characteristics of
each view in more detail.  You can switch to the different views using the
hotkeys described in the :ref:`hotkeys_display` section or by pressing
:kbd:`ENTER` to activate the breadcrumb bar, moving to the first crumb, and
then selecting the desired view.  You can switch back to the previous view by
pressing :kbd:`q`.  You can switch forward to the new view by pressing
:kbd:`a`.  If the views are time-based (e.g. log and histogram), pressing
:kbd:`Shift` + :kbd:`q` and :kbd:`Shift` + :kbd:`a` will synchronize the top
times in the views.

The right side of the display has a proportionally sized 'scrollbar' that
shows:

* the current position in the file;
* the locations of errors/warnings in the log files by using red or yellow
  coloring;
* the locations of search hits by using a tick-mark pointing to the left;
* the locations of bookmarks by using a tick-mark pointing to the right.

Top Status Bar
--------------

The top status bar shows the current time and messages stored in the
:ref:`table_lnav_user_notifications` table.

Below the top status bar is the breadcrumb bar that displays the semantic
location of the top line in the main view.  For example, within a
pretty-printed JSON document, it will show the path to property at the top
of the view.  The actual content of the bar depends on the current view and
will be updated as you navigate around the main view.  The bar can also be
used to navigate around the document by focusing on it.

Breadcrumb Bar
--------------

.. figure:: lnav-breadcrumbs-help.png
   :align: center
   :figwidth: 90%

   Screenshot of the breadcrumb bar focused and navigating the help text

To focus on the breadcrumb bar, press :kbd:`ENTER`.  The :kbd:`←`/:kbd:`→`
cursor keys can be used to select a crumb and the :kbd:`↑`/:kbd:`↓` keys can
be used select a value of that crumb.  To accept a value and drop focus on the
bar, press :kbd:`ENTER`.  To accept a value and move to the next crumb, press
:kbd:`→`.  Using :kbd:`→` makes it quicker to drill down into a document
without having to constantly switch focus.  To drop focus on the bar without
accepting anything, press :kbd:`Escape`.

There are three types of crumbs:

* a dropdown where one of a limited set of values can be selected;
* a combobox where a value can be entered directly or selected;
* a numeric input for entering array indexes.

When a dropdown or combobox is selected, you can type part of the desired value
to filter the list of values.  For example, the first crumb is always the
current view, typing in "hi" will filter the list down to the "HIST" value.

Configuration Panels
--------------------

.. figure:: lnav-config-header.png
   :align: center
   :figwidth: 90%

   Screenshot of the header for the configuration panels when they are hidden.

After the main view content, there is a header bar for two configuration
panels: Files and Filters.  These panels provide visual access to parts of
lnav's configuration.  To access the panels, press the :kbd:`TAB` key.
To hide the panels again, press :kbd:`q`.

.. figure:: lnav-files-panel.png
   :align: center
   :figwidth: 90%

   Screenshot of the files panel showing the loaded files.

The Files panel is open initially to display progress in loading files.
The following information can be displayed for each file:

* the "unique" portion of the path relative to the other files;
* the amount of data that has been indexed;
* the date range of log messages contained in the file;
* the errors that were encountered while trying to index the file;
* the notes recorded for files where some automatic action was taken,
  like hiding the file if it was seen as a duplicate of another file.

.. figure:: lnav-filters-panel.png
   :align: center
   :figwidth: 90%

   Screenshot of the filters panel showing an OUT and a disabled IN filter.

If the view supports filtering, there will be a status line showing the
following:

* the number of enabled filters and the total number of filters;
* the number of lines that are **not** displayed because of filtering.

To edit the filters, you can press TAB to change the focus from the main
view to the filter editor.  The editor allows you to create, enable/disable,
and delete filters easily.

Bottom Status Bar
-----------------

The second to last line is the bottom status bar, which shows the following:

* the line number of the top line, starting from zero;
* the location within the view, as a percentage;
* the current search hit, the total number of hits, and the search term;
* the loading indicator.

When the interactive prompt is active, this bar can show the prompt
description, help text, or error message.

Prompt
------

Finally, the last line on the display is where you can enter search
patterns and execute internal commands, such as converting a
unix-timestamp into a human-readable date.  The following key-presses
will activate a corresponding prompt:

* :kbd:`/` - The search prompt.  You can enter a PCRE-flavored regular
  expression to search for in the current view.
* :kbd:`:` - The command prompt.  Commands are used to perform common
  operations.
* :kbd:`;` - The SQL prompt.  SQL queries can be used for log analysis
  and manipulating **lnav**'s state.
* :kbd:`|` - The script prompt.  Enter a path to the lnav script to
  execute, along with the arguments to pass in.

The command-line is by the readline library, so the usual set of keyboard
shortcuts can be used for editing and moving within the command-line.

.. _ui_views:

Views
-----

The accessible content within lnav is separated into the following views.

LOG
^^^

The log view displays the log messages from any loaded log files in time
order.  This view will be shown by default if any log messages are available.

On color displays, the log messages will be highlighted as follows:

* Errors will be colored in red;
* warnings will be yellow;
* search hits are reverse video;
* various color highlights will be applied to: IP addresses, SQL keywords,
  XML tags, file and line numbers in Java backtraces, and quoted strings;
* "identifiers" in the messages will be randomly assigned colors based on their
  content (works best on "xterm-256color" terminals).

.. note::

  If the coloring is too much for your tastes, you can change to the
  "grayscale" theme by entering the following command:

  .. code-block::  lnav

    :config /ui/theme grayscale

The breadcrumb bar will show the following crumbs:

* the timestamp for the top line;
* the log format for the top line;
* the name of the file the top line was pulled from;
* the "operation ID" of the top log message, if it is supported by the log
  format.

These crumbs are interactive and can be used to navigate to different parts
of the log view.  For example, selecting a different value in the log format
crumb will jump to the first message with that format.

TEXT
^^^^

The text view displays files for which lnav could not detect any log messages.

Files with an :code:`.md` extension will be treated as Markdown files and
rendered separately.

DB
^^

The DB view shows the results of queries done through the SQLite interface.
You can execute a query by pressing :kbd:`;` and then entering a SQL statement.
You can switch to the SQL view by pressing :kbd:`v`.

HELP
^^^^

The help view displays the builtin help text.  Press :kbd:`?` to switch to the
help view at any time.  While in the help view, the breadcrumb bar can be used
to navigate to different sections of the document.

HIST
^^^^

The histogram view displays a stacked bar chart of messages over time
classified by their log level and whether they've been bookmarked.  Press
:kbd:`i` to switch back and forth to the histogram view.  You can also press
:kbd:`Shift`+:kbd:`i` to toggle the histogram view while synchronizing the top
time.  While in the histogram view, pressing :kbd:`z`/:kbd:`Shift`+:kbd:`z`
will zoom in/out.

PRETTY
^^^^^^

The pretty-print view takes the text displayed in the current view and shows
the result of a pretty-printer run on that text.  For example, if a log
message contained an XML message on a single line, the pretty-printer would
break the XML across multiple lines with appropriate indentation.

SCHEMA
^^^^^^

The schema view displays the current schema of the builtin SQLite database.

SPECTRO
^^^^^^^

The spectrogram view is a "three"-dimensional display of data points of a log
field or a SQL query column.  The dimensions are time on the Y axis, the range
of data point values on the X axis, and the number of data points as a color.
For example, if you were to visualize process CPU usage over time, the range
of values on the X axis would be CPU percentages and there would be colored
blocks at each point on the line where a process had that CPU percentage, like
so

.. figure:: lnav-spectro-cpu-pct.png
   :align: center

   Screenshot of the **lnav** spectrogram view showing CPU usage of processes.

The colors correspond to the relative number of data points in a bucket.
The legend overlaid at the top line in the view shows the counts of data
points that are in a particular color, with green having the fewest number of
data points, yellow the middle, and red the most.  You can select a particular
bucket using the cursor keys to see the exact number of data points and the
range of values.  The panel at the bottom of the view shows the data points
themselves from the original source, the log file or the SQL query results.
You can press :kbd:`TAB` to focus on the details panel so you can scroll
around and get a closer look at the values.