lnav/docs/source/usage.rst

.. _usage:

Usage
=====

This chapter contains an overview of how to use **lnav**.


Basic Controls
--------------

Like most file viewers, scrolling through files can be done with the usual
:ref:`hotkeys<hotkeys>`.  For non-trivial operations, you can enter the
:ref:`command<commands>` prompt by pressing :kbd:`:`.  To analyze data in a
log file, you can enter the :ref:`SQL prompt<sql-ext>` by pressing :kbd:`;`.

.. tip::

  Check the bottom right corner of the screen for tips on hotkeys that might
  be useful in the current context.

  .. figure:: hotkey-tips.png
     :align: center

     When **lnav** is first open, it suggests using :kbd:`e` and
     :kbd:`Shift` + :kbd:`e` to jump to error messages.


Viewing Files
-------------

The files to view in **lnav** can be given on the command-line or passed to the
:ref:`:open<open>` command.  A
`glob pattern <https://en.wikipedia.org/wiki/Glob_(programming)>`_ can be given
to watch for files with a common name.  If the path is a directory, all of the
files in the directory will be opened and the directory will be monitored for
files to be added or removed from the view.  If the path is an archive or
compressed file (and lnav was built with libarchive), the archive will be
extracted to a temporary location and the files within will be loaded.  The
files that are found will be scanned to identify their file format.  Files
that match a log format will be collated by time and displayed in the LOG
view.  Plain text files can be viewed in the TEXT view, which can be accessed
by pressing :kbd:`t`.


Archive Support
^^^^^^^^^^^^^^^

If **lnav** is compiled with `libarchive <https://www.libarchive.org>`_,
any files to be opened will be examined to see if they are a supported archive
type.  If so, the contents of the archive will be extracted to the
:code:`$TMPDIR/lnav-user-${UID}-work/archives/` directory.  Once extracted, the
files within will be loaded into lnav.  To speed up opening large amounts of
files, any file that meets the following conditions will be automatically
hidden and not indexed:

* Binary files
* Plain text files that are larger than 128KB
* Duplicate log files

The unpacked files will be left in the temporary directory after exiting
**lnav** so that opening the same archive again will be faster.  Unpacked
archives that have not been accessed in the past two days will be automatically
deleted the next time **lnav** is started.


Remote Files
^^^^^^^^^^^^

Files on remote machines can be viewed and tailed if you have access to the
machines via SSH.  First, make sure you can SSH into the remote machine without
any interaction by: 1) accepting the host key as known and 2) copying your
identity's public key to the :file:`.ssh/authorized_keys` file on the remote
machine.  Once the setup is complete, you can open a file on a remote host
using the same syntax as :command:`scp(1)` where the username and host are
given, followed by a colon, and then the path to the files, like so::

    [user@]host:/path/to/logs

For example, to open :file:`/var/log/syslog.log` on "host1.example.com" as the
user "dean", you would write:

.. prompt:: bash

   lnav dean@host1.example.com:/var/log/syslog.log

Remote files can also be opened using the :ref:`:open<open>` command.  Opening
a remote file in the TUI has the advantage that the file path can be
:kbd:`TAB`-completed and a preview is shown of the first few lines of the
file.


Searching
---------

Any log messages that are loaded into **lnav** are indexed by time and log
level (e.g. error, warning) to make searching quick and easy with
:ref:`hotkeys<hotkeys>`.  For example, pressing :kbd:`e` will jump to the
next error in the file and pressing :kbd:`Shift` + :kbd:`e` will jump to
the previous error.  Plain text searches can be done by pressing :kbd:`/`
to enter the search prompt.  A regular expression can be entered into the
prompt to start a search through the current view.


.. _filtering:

Filtering
---------

To reduce the amount of noise in a log file, **lnav** can hide log messages
that match certain criteria.  The following sub-sections explain ways to go
about that.


Regular Expression Match
^^^^^^^^^^^^^^^^^^^^^^^^

If there are log messages that you are not interested in, you can do a
"filter out" to hide messages that match a pattern.  A filter can be created
using the interactive editor, the :ref:`:filter-out<filter_out>` command, or
by doing an :code:`INSERT` into the
:ref:`lnav_view_filters<table_lnav_view_filters>` table.

If there are log messages that you are only interested in, you can do a
"filter in" to only show messages that match a pattern.  The filter can be
created using the interactive editor, the :ref:`:filter-in<filter_in>` command,
or by doing an :code:`INSERT` into the
:ref:`lnav_view_filters<table_lnav_view_filters>` table.


SQLite Expression
^^^^^^^^^^^^^^^^^

Complex filtering can be done by passing a SQLite expression to the
:ref:`:filter-expr<filter_expr>` command.  The expression will be executed for
every log message and if it returns true, the line will be shown in the log
view.


Time
^^^^

To limit log messages to a given time frame, the
:ref:`:hide-lines-before<hide_lines_before>` and
:ref:`:hide-lines-after<hide_lines_after>` commands can be used to specify
the beginning and end of the time frame.


Log level
^^^^^^^^^

To hide messages below a certain log level, you can use the
:ref:`:set-min-log-level<set_min_log_level>`.

.. _search_tables:

Search Tables
-------------

TBD


.. _taking_notes:

Taking Notes
------------

A few of the columns in the log tables can be updated on a row-by-row basis to
allow you to take notes.  The majority of the columns in a log table are
read-only since they are backed by the log files themselves.  However, the
following columns can be changed by an :code:`UPDATE` statement:

* **log_part** - The "partition" the log message belongs to.  This column can
  also be changed by the :ref:`:partition-name<partition_name>` command.
* **log_mark** - Indicates whether the line has been bookmarked.
* **log_comment** - A free-form text field for storing commentary.  This
  column can also be changed by the :ref:`:comment<comment>` command.
* **log_tags** - A JSON list of tags associated with the log message.  This
  column can also be changed by the :ref:`:tag<tag>` command.

While these columns can be updated by through other means, using the SQL
interface allows you to make changes automatically and en masse.  For example,
to bookmark all lines that have the text "something interesting" in the log
message body, you can execute:

.. code-block:: custsqlite

   ;UPDATE all_logs SET log_mark = 1 WHERE log_body LIKE '%something interesting%'

As a more advanced example of the power afforded by SQL and **lnav**'s virtual
tables, we will tag log messages where the IP address bound by dhclient has
changed.  For example, if dhclient reports "bound to 10.0.0.1" initially and
then reports "bound to 10.0.0.2", we want to tag only the messages where the
IP address was different from the previous message.  While this can be done
with a single SQL statement [#]_, we will break things down into a few steps for
this example.  First, we will use the :ref:`:create-search-table<create_search_table>`
command to match the dhclient message and extract the IP address:

.. code-block:: lnav

   :create-search-table dhclient_ip bound to (?<ip>[^ ]+)

The above command will create a new table named :code:`dhclient_ip` with the
standard log columns and an :code:`ip` column that contains the IP address.
Next, we will create a view over the :code:`dhclient_ip` table that returns
the log message line number, the IP address from the current row and the IP
address from the previous row:

.. code-block:: custsqlite

   ;CREATE VIEW IF NOT EXISTS dhclient_ip_changes AS SELECT log_line, ip, lag(ip) OVER (ORDER BY log_line) AS prev_ip FROM dhclient_ip

Finally, the following :code:`UPDATE` statement will concatenate the tag
"#ipchanged" onto the :code:`log_tags` column for any rows in the view where
the current IP is different from the previous IP:

.. code-block:: custsqlite

   ;UPDATE syslog_log SET log_tags = json_concat(log_tags, '#ipchanged') WHERE log_line IN (SELECT log_line FROM dhclient_ip_changes WHERE ip != prev_ip)

Since the above can be a lot to type out interactively, you can put these
commands into a :ref:`script<scripts>` and execute that script with the
:kbd:`\|` hotkey.

.. [#] The expression :code:`regexp_match('bound to ([^ ]+)', log_body) as ip`
   can be used to extract the IP address from the log message body.