Kernel initialization. Part 1. ================================================================================ First steps in the kernel code -------------------------------------------------------------------------------- The previous [post](https://0xax.gitbooks.io/linux-insides/content/Booting/linux-bootstrap-5.html) was a last part of the Linux kernel [booting process](https://0xax.gitbooks.io/linux-insides/content/Booting/index.html) chapter and now we are starting to dive into initialization process of the Linux kernel. After the image of the Linux kernel is decompressed and placed in a correct place in memory, it starts to work. All previous parts describe the work of the Linux kernel setup code which does preparation before the first bytes of the Linux kernel code will be executed. From now we are in the kernel and all parts of this chapter will be devoted to the initialization process of the kernel before it will launch process with [pid](https://en.wikipedia.org/wiki/Process_identifier) `1`. There are many things to do before the kernel will start first `init` process. Hope we will see all of the preparations before kernel will start in this big chapter. We will start from the kernel entry point, which is located in the [arch/x86/kernel/head_64.S](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/head_64.S) and will move further and further. We will see first preparations like early page tables initialization, switch to a new descriptor in kernel space and many many more, before we will see the `start_kernel` function from the [init/main.c](https://github.com/torvalds/linux/blob/master/init/main.c#L489) will be called. In the last [part](https://0xax.gitbooks.io/linux-insides/content/Booting/linux-bootstrap-5.html) of the previous [chapter](https://0xax.gitbooks.io/linux-insides/content/Booting/index.html) we stopped at the [jmp](https://github.com/torvalds/linux/blob/master/arch/x86/boot/compressed/head_64.S) instruction from the [arch/x86/boot/compressed/head_64.S](https://github.com/torvalds/linux/blob/master/arch/x86/boot/compressed/head_64.S) assembly source code file: ```assembly jmp *%rax ``` At this moment the `rax` register contains address of the Linux kernel entry point which that was obtained as a result of the call of the `decompress_kernel` function from the [arch/x86/boot/compressed/misc.c](https://github.com/torvalds/linux/blob/master/arch/x86/boot/compressed/misc.c) source code file. So, our last instruction in the kernel setup code is a jump on the kernel entry point. We already know where is defined the entry point of the linux kernel, so we are able to start to learn what does the Linux kernel does after the start. First steps in the kernel -------------------------------------------------------------------------------- Okay, we got the address of the decompressed kernel image from the `decompress_kernel` function into `rax` register and just jumped there. As we already know the entry point of the decompressed kernel image starts in the [arch/x86/kernel/head_64.S](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/head_64.S) assembly source code file and at the beginning of it, we can see following definitions: ```assembly __HEAD .code64 .globl startup_64 startup_64: ... ... ... ``` We can see definition of the `startup_64` routine that is defined in the `__HEAD` section, which is just a macro which expands to the definition of executable `.head.text` section: ```C #define __HEAD .section ".head.text","ax" ``` We can see definition of this section in the [arch/x86/kernel/vmlinux.lds.S](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/vmlinux.lds.S#L93) linker script: ``` .text : AT(ADDR(.text) - LOAD_OFFSET) { _text = .; ... ... ... } :text = 0x9090 ``` Besides the definition of the `.text` section, we can understand default virtual and physical addresses from the linker script. Note that address of the `_text` is location counter which is defined as: ``` . = __START_KERNEL; ``` for the [x86_64](https://en.wikipedia.org/wiki/X86-64). The definition of the `__START_KERNEL` macro is located in the [arch/x86/include/asm/page_types.h](https://github.com/torvalds/linux/blob/master/arch/x86/include/asm/page_types.h) header file and represented by the sum of the base virtual address of the kernel mapping and physical start: ```C #define __START_KERNEL (__START_KERNEL_map + __PHYSICAL_START) #define __PHYSICAL_START ALIGN(CONFIG_PHYSICAL_START, CONFIG_PHYSICAL_ALIGN) ``` Or in other words: * Base physical address of the Linux kernel - `0x1000000`; * Base virtual address of the Linux kernel - `0xffffffff81000000`. Now we know default physical and virtual addresses of the `startup_64` routine, but to know actual addresses we must to calculate it with the following code: ```assembly leaq _text(%rip), %rbp subq $_text - __START_KERNEL_map, %rbp ``` Yes, it defined as `0x1000000`, but it may be different, for example if [kASLR](https://en.wikipedia.org/wiki/Address_space_layout_randomization#Linux) is enabled. So our current goal is to calculate delta between `0x1000000` and where we actually loaded. Here we just put the `rip-relative` address to the `rbp` register and then subtract `$_text - __START_KERNEL_map` from it. We know that compiled virtual address of the `_text` is `0xffffffff81000000` and the physical address of it is `0x1000000`. The `__START_KERNEL_map` macro expands to the `0xffffffff80000000` address, so at the second line of the assembly code, we will get following expression: ``` rbp = 0x1000000 - (0xffffffff81000000 - 0xffffffff80000000) ``` So, after the calculation, the `rbp` will contain `0` which represents difference between addresses where we actually loaded and where the code was compiled. In our case `zero` means that the Linux kernel was loaded by default address and the [kASLR](https://en.wikipedia.org/wiki/Address_space_layout_randomization#Linux) was disabled. After we got the address of the `startup_64`, we need to do a check that this address is correctly aligned. We will do it with the following code: ```assembly testl $~PMD_PAGE_MASK, %ebp jnz bad_address ``` Here we just compare low part of the `rbp` register with the complemented value of the `PMD_PAGE_MASK`. The `PMD_PAGE_MASK` indicates the mask for `Page middle directory` (read [paging](http://0xax.gitbooks.io/linux-insides/content/Theory/Paging.html) about it) and defined as: ```C #define PMD_PAGE_MASK (~(PMD_PAGE_SIZE-1)) #define PMD_PAGE_SIZE (_AC(1, UL) << PMD_SHIFT) #define PMD_SHIFT 21 ``` As we can easily calculate, `PMD_PAGE_SIZE` is `2` megabytes. Here we use standard formula for checking alignment and if `text` address is not aligned for `2` megabytes, we jump to `bad_address` label. After this we check address that it is not too large by the checking of highest `18` bits: ```assembly leaq _text(%rip), %rax shrq $MAX_PHYSMEM_BITS, %rax jnz bad_address ``` The address must not be greater than `46`-bits: ```C #define MAX_PHYSMEM_BITS 46 ``` Okay, we did some early checks and now we can move on. Fix base addresses of page tables -------------------------------------------------------------------------------- The first step before we start to setup identity paging is to fixup following addresses: ```assembly addq %rbp, early_level4_pgt + (L4_START_KERNEL*8)(%rip) addq %rbp, level3_kernel_pgt + (510*8)(%rip) addq %rbp, level3_kernel_pgt + (511*8)(%rip) addq %rbp, level2_fixmap_pgt + (506*8)(%rip) ``` All of `early_level4_pgt`, `level3_kernel_pgt` and other address may be wrong if the `startup_64` is not equal to default `0x1000000` address. The `rbp` register contains the delta address so we add to the certain entries of the `early_level4_pgt`, the `level3_kernel_pgt` and the `level2_fixmap_pgt`. Let's try to understand what these labels mean. First of all let's look at their definition: ```assembly NEXT_PAGE(early_level4_pgt) .fill 511,8,0 .quad level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE NEXT_PAGE(level3_kernel_pgt) .fill L3_START_KERNEL,8,0 .quad level2_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE .quad level2_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE NEXT_PAGE(level2_kernel_pgt) PMDS(0, __PAGE_KERNEL_LARGE_EXEC, KERNEL_IMAGE_SIZE/PMD_SIZE) NEXT_PAGE(level2_fixmap_pgt) .fill 506,8,0 .quad level1_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE .fill 5,8,0 NEXT_PAGE(level1_fixmap_pgt) .fill 512,8,0 ``` Looks hard, but it isn't. First of all let's look at the `early_level4_pgt`. It starts with the (4096 - 8) bytes of zeros, it means that we don't use the first `511` entries. And after this we can see one `level3_kernel_pgt` entry. Note that we subtract `__START_KERNEL_map + _PAGE_TABLE` from it. As we know `__START_KERNEL_map` is a base virtual address of the kernel text, so if we subtract `__START_KERNEL_map`, we will get physical address of the `level3_kernel_pgt`. Now let's look at `_PAGE_TABLE`, it is just page entry access rights: ```C #define _PAGE_TABLE (_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | \ _PAGE_ACCESSED | _PAGE_DIRTY) ``` You can read more about it in the [paging](http://0xax.gitbooks.io/linux-insides/content/Theory/Paging.html) part. The `level3_kernel_pgt` - stores two entries which map kernel space. At the start of it's definition, we can see that it is filled with zeros `L3_START_KERNEL` or `510` times. Here the `L3_START_KERNEL` is the index in the page upper directory which contains `__START_KERNEL_map` address and it equals `510`. After this, we can see the definition of the two `level3_kernel_pgt` entries: `level2_kernel_pgt` and `level2_fixmap_pgt`. First is simple, it is page table entry which contains pointer to the page middle directory which maps kernel space and it has: ```C #define _KERNPG_TABLE (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | \ _PAGE_DIRTY) ``` access rights. The second - `level2_fixmap_pgt` is a virtual addresses which can refer to any physical addresses even under kernel space. They represented by the one `level2_fixmap_pgt` entry and `10` megabytes hole for the [vsyscalls](https://lwn.net/Articles/446528/) mapping. The next `level2_kernel_pgt` calls the `PDMS` macro which creates `512` megabytes from the `__START_KERNEL_map` for kernel `.text` (after these `512` megabytes will be modules memory space). Now, after we saw definitions of these symbols, let's get back to the code which is described at the beginning of the section. Remember that the `rbp` register contains delta between the address of the `startup_64` symbol which was got during kernel [linking](https://en.wikipedia.org/wiki/Linker_%28computing%29) and the actual address. So, for this moment, we just need to add this delta to the base address of some page table entries, that they'll have correct addresses. In our case these entries are: ```assembly addq %rbp, early_level4_pgt + (L4_START_KERNEL*8)(%rip) addq %rbp, level3_kernel_pgt + (510*8)(%rip) addq %rbp, level3_kernel_pgt + (511*8)(%rip) addq %rbp, level2_fixmap_pgt + (506*8)(%rip) ``` or the last entry of the `early_level4_pgt` which is the `level3_kernel_pgt`, last two entries of the `level3_kernel_pgt` which are the `level2_kernel_pgt` and the `level2_fixmap_pgt` and five hundreds seventh entry of the `level2_fixmap_pgt` which is `level1_fixmap_pgt` page directory. After all of this we will have: ``` early_level4_pgt[511] -> level3_kernel_pgt[0] level3_kernel_pgt[510] -> level2_kernel_pgt[0] level3_kernel_pgt[511] -> level2_fixmap_pgt[0] level2_kernel_pgt[0] -> 512 MB kernel mapping level2_fixmap_pgt[507] -> level1_fixmap_pgt ``` Note that we didn't fixup base address of the `early_level4_pgt` and some of other page table directories, because we will see this during of building/filling of structures for these page tables. As we corrected base addresses of the page tables, we can start to build it. Identity mapping setup -------------------------------------------------------------------------------- Now we can see the set up of identity mapping of early page tables. In Identity Mapped Paging, virtual addresses are mapped to physical addresses that have the same value, `1 : 1`. Let's look at it in detail. First of all we get the `rip-relative` address of the `_text` and `_early_level4_pgt` and put they into `rdi` and `rbx` registers: ```assembly leaq _text(%rip), %rdi leaq early_level4_pgt(%rip), %rbx ``` After this we store address of the `_text` in the `rax` and get the index of the page global directory entry which stores `_text` address, by shifting `_text` address on the `PGDIR_SHIFT`: ```assembly movq %rdi, %rax shrq $PGDIR_SHIFT, %rax leaq (4096 + _KERNPG_TABLE)(%rbx), %rdx movq %rdx, 0(%rbx,%rax,8) movq %rdx, 8(%rbx,%rax,8) ``` where `PGDIR_SHIFT` is `39`. `PGDIR_SHFT` indicates the mask for page global directory bits in a virtual address. There are macro for all types of page directories: ```C #define PGDIR_SHIFT 39 #define PUD_SHIFT 30 #define PMD_SHIFT 21 ``` After this we put the address of the first `level3_kernel_pgt` in the `rdx` with the `_KERNPG_TABLE` access rights (see above) and fill the `early_level4_pgt` with the 2 `level3_kernel_pgt` entries. After this we add `4096` (size of the `early_level4_pgt`) to the `rdx` (it now contains the address of the first entry of the `level3_kernel_pgt`) and put `rdi` (it now contains physical address of the `_text`) to the `rax`. And after this we write addresses of the two page upper directory entries to the `level3_kernel_pgt`: ```assembly addq $4096, %rdx movq %rdi, %rax shrq $PUD_SHIFT, %rax andl $(PTRS_PER_PUD-1), %eax movq %rdx, 4096(%rbx,%rax,8) incl %eax andl $(PTRS_PER_PUD-1), %eax movq %rdx, 4096(%rbx,%rax,8) ``` In the next step we write addresses of the page middle directory entries to the `level2_kernel_pgt` and the last step is correcting of the kernel text+data virtual addresses: ```assembly leaq level2_kernel_pgt(%rip), %rdi leaq 4096(%rdi), %r8 1: testq $1, 0(%rdi) jz 2f addq %rbp, 0(%rdi) 2: addq $8, %rdi cmp %r8, %rdi jne 1b ``` Here we put the address of the `level2_kernel_pgt` to the `rdi` and address of the page table entry to the `r8` register. Next we check the present bit in the `level2_kernel_pgt` and if it is zero we're moving to the next page by adding 8 bytes to `rdi` which contains address of the `level2_kernel_pgt`. After this we compare it with `r8` (contains address of the page table entry) and go back to label `1` or move forward. In the next step we correct `phys_base` physical address with `rbp` (contains physical address of the `_text`), put physical address of the `early_level4_pgt` and jump to label `1`: ```assembly addq %rbp, phys_base(%rip) movq $(early_level4_pgt - __START_KERNEL_map), %rax jmp 1f ``` where `phys_base` matches the first entry of the `level2_kernel_pgt` which is `512` MB kernel mapping. Last preparation before jump at the kernel entry point -------------------------------------------------------------------------------- After that we jump to the label `1` we enable `PAE`, `PGE` (Paging Global Extension) and put the physical address of the `phys_base` (see above) to the `rax` register and fill `cr3` register with it: ```assembly 1: movl $(X86_CR4_PAE | X86_CR4_PGE), %ecx movq %rcx, %cr4 addq phys_base(%rip), %rax movq %rax, %cr3 ``` In the next step we check that CPU supports [NX](http://en.wikipedia.org/wiki/NX_bit) bit with: ```assembly movl $0x80000001, %eax cpuid movl %edx,%edi ``` We put `0x80000001` value to the `eax` and execute `cpuid` instruction for getting the extended processor info and feature bits. The result will be in the `edx` register which we put to the `edi`. Now we put `0xc0000080` or `MSR_EFER` to the `ecx` and call `rdmsr` instruction for the reading model specific register. ```assembly movl $MSR_EFER, %ecx rdmsr ``` The result will be in the `edx:eax`. General view of the `EFER` is following: ``` 63 32 -------------------------------------------------------------------------------- | | | Reserved MBZ | | | -------------------------------------------------------------------------------- 31 16 15 14 13 12 11 10 9 8 7 1 0 -------------------------------------------------------------------------------- | | T | | | | | | | | | | | Reserved MBZ | C | FFXSR | LMSLE |SVME|NXE|LMA|MBZ|LME|RAZ|SCE| | | E | | | | | | | | | | -------------------------------------------------------------------------------- ``` We will not see all fields in details here, but we will learn about this and other `MSRs` in a special part about it. As we read `EFER` to the `edx:eax`, we check `_EFER_SCE` or zero bit which is `System Call Extensions` with `btsl` instruction and set it to one. By the setting `SCE` bit we enable `SYSCALL` and `SYSRET` instructions. In the next step we check 20th bit in the `edi`, remember that this register stores result of the `cpuid` (see above). If `20` bit is set (`NX` bit) we just write `EFER_SCE` to the model specific register. ```assembly btsl $_EFER_SCE, %eax btl $20,%edi jnc 1f btsl $_EFER_NX, %eax btsq $_PAGE_BIT_NX,early_pmd_flags(%rip) 1: wrmsr ``` If the [NX](https://en.wikipedia.org/wiki/NX_bit) bit is supported we enable `_EFER_NX` and write it too, with the `wrmsr` instruction. After the [NX](https://en.wikipedia.org/wiki/NX_bit) bit is set, we set some bits in the `cr0` [control register](https://en.wikipedia.org/wiki/Control_register), namely: * `X86_CR0_PE` - system is in protected mode; * `X86_CR0_MP` - controls interaction of WAIT/FWAIT instructions with TS flag in CR0; * `X86_CR0_ET` - on the 386, it allowed to specify whether the external math coprocessor was an 80287 or 80387; * `X86_CR0_NE` - enable internal x87 floating point error reporting when set, else enables PC style x87 error detection; * `X86_CR0_WP` - when set, the CPU can't write to read-only pages when privilege level is 0; * `X86_CR0_AM` - alignment check enabled if AM set, AC flag (in EFLAGS register) set, and privilege level is 3; * `X86_CR0_PG` - enable paging. by the execution following assembly code: ```assembly #define CR0_STATE (X86_CR0_PE | X86_CR0_MP | X86_CR0_ET | \ X86_CR0_NE | X86_CR0_WP | X86_CR0_AM | \ X86_CR0_PG) movl $CR0_STATE, %eax movq %rax, %cr0 ``` We already know that to run any code, and even more [C](https://en.wikipedia.org/wiki/C_%28programming_language%29) code from assembly, we need to setup a stack. As always, we are doing it by the setting of [stack pointer](https://en.wikipedia.org/wiki/Stack_register) to a correct place in memory and resetting [flags](https://en.wikipedia.org/wiki/FLAGS_register) register after this: ```assembly movq stack_start(%rip), %rsp pushq $0 popfq ``` The most interesting thing here is the `stack_start`. It defined in the same [source](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/head_64.S) code file and looks like: ```assembly GLOBAL(stack_start) .quad init_thread_union+THREAD_SIZE-8 ``` The `GLOBAL` is already familiar to us from. It defined in the [arch/x86/include/asm/linkage.h](https://github.com/torvalds/linux/blob/master/arch/x86/include/asm/linkage.h) header file expands to the `global` symbol definition: ```C #define GLOBAL(name) \ .globl name; \ name: ``` The `THREAD_SIZE` macro is defined in the [arch/x86/include/asm/page_64_types.h](https://github.com/torvalds/linux/blob/master/arch/x86/include/asm/page_64_types.h) header file and depends on value of the `KASAN_STACK_ORDER` macro: ```C #define THREAD_SIZE_ORDER (2 + KASAN_STACK_ORDER) #define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER) ``` We consider when the [kasan](http://lxr.free-electrons.com/source/Documentation/kasan.txt) is disabled and the `PAGE_SIZE` is `4096` bytes. So the `THREAD_SIZE` will expands to `16` kilobytes and represents size of the stack of a thread. Why is `thread`? You may already know that each [process](https://en.wikipedia.org/wiki/Process_%28computing%29) may have parent [processes](https://en.wikipedia.org/wiki/Parent_process) and [child](https://en.wikipedia.org/wiki/Child_process) processes. Actually, a parent process and child process differ in stack. A new kernel stack is allocated for a new process. In the Linux kernel this stack is represented by the [union](https://en.wikipedia.org/wiki/Union_type#C.2FC.2B.2B) with the `thread_info` structure. And as we can see the `init_thread_union` is represented by the `thread_union`, which defined as: ```C union thread_union { struct thread_info thread_info; unsigned long stack[THREAD_SIZE/sizeof(long)]; }; ``` and `init_thread_union` looks like: ```C union thread_union init_thread_union __init_task_data = { INIT_THREAD_INFO(init_task) }; ``` Where the `INIT_THREAD_INFO` macro takes `task_struct` structure which represents process descriptor in the Linux kernel and does some basic initialization of the given `task_struct` structure: ```C #define INIT_THREAD_INFO(tsk) \ { \ .task = &tsk, \ .flags = 0, \ .cpu = 0, \ .addr_limit = KERNEL_DS, \ } ``` So, the `thread_union` contains low-level information about a process and process's stack and placed in the bottom of stack: ``` +-----------------------+ | | | | | | | Kernel stack | | | | | | | |-----------------------| | | | struct thread_info | | | +-----------------------+ ``` Note that we reserve `8` bytes at the to of stack. This is necessary to guarantee illegal access of the next page memory. After the early boot stack is set, to update the [Global Descriptor Table](https://en.wikipedia.org/wiki/Global_Descriptor_Table) with `lgdt` instruction: ```assembly lgdt early_gdt_descr(%rip) ``` where the `early_gdt_descr` is defined as: ```assembly early_gdt_descr: .word GDT_ENTRIES*8-1 early_gdt_descr_base: .quad INIT_PER_CPU_VAR(gdt_page) ``` We need to reload `Global Descriptor Table` because now kernel works in the low userspace addresses, but soon kernel will work in its own space. Now let's look at the definition of `early_gdt_descr`. Global Descriptor Table contains `32` entries: ```C #define GDT_ENTRIES 32 ``` for kernel code, data, thread local storage segments and etc... it's simple. Now let's look at the `early_gdt_descr_base`. First of `gdt_page` defined as: ```C struct gdt_page { struct desc_struct gdt[GDT_ENTRIES]; } __attribute__((aligned(PAGE_SIZE))); ``` in the [arch/x86/include/asm/desc.h](https://github.com/torvalds/linux/blob/master/arch/x86/include/asm/desc.h). It contains one field `gdt` which is array of the `desc_struct` structure which is defined as: ```C struct desc_struct { union { struct { unsigned int a; unsigned int b; }; struct { u16 limit0; u16 base0; unsigned base1: 8, type: 4, s: 1, dpl: 2, p: 1; unsigned limit: 4, avl: 1, l: 1, d: 1, g: 1, base2: 8; }; }; } __attribute__((packed)); ``` and presents familiar to us `GDT` descriptor. Also we can note that `gdt_page` structure aligned to `PAGE_SIZE` which is `4096` bytes. It means that `gdt` will occupy one page. Now let's try to understand what is `INIT_PER_CPU_VAR`. `INIT_PER_CPU_VAR` is a macro which defined in the [arch/x86/include/asm/percpu.h](https://github.com/torvalds/linux/blob/master/arch/x86/include/asm/percpu.h) and just concats `init_per_cpu__` with the given parameter: ```C #define INIT_PER_CPU_VAR(var) init_per_cpu__##var ``` After the `INIT_PER_CPU_VAR` macro will be expanded, we will have `init_per_cpu__gdt_page`. We can see in the [linker script](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/vmlinux.lds.S): ``` #define INIT_PER_CPU(x) init_per_cpu__##x = x + __per_cpu_load INIT_PER_CPU(gdt_page); ``` As we got `init_per_cpu__gdt_page` in `INIT_PER_CPU_VAR` and `INIT_PER_CPU` macro from linker script will be expanded we will get offset from the `__per_cpu_load`. After this calculations, we will have correct base address of the new GDT. Generally per-CPU variables is a 2.6 kernel feature. You can understand what it is from its name. When we create `per-CPU` variable, each CPU will have will have its own copy of this variable. Here we creating `gdt_page` per-CPU variable. There are many advantages for variables of this type, like there are no locks, because each CPU works with its own copy of variable and etc... So every core on multiprocessor will have its own `GDT` table and every entry in the table will represent a memory segment which can be accessed from the thread which ran on the core. You can read in details about `per-CPU` variables in the [Theory/per-cpu](http://0xax.gitbooks.io/linux-insides/content/Concepts/per-cpu.html) post. As we loaded new Global Descriptor Table, we reload segments as we did it every time: ```assembly xorl %eax,%eax movl %eax,%ds movl %eax,%ss movl %eax,%es movl %eax,%fs movl %eax,%gs ``` After all of these steps we set up `gs` register that it post to the `irqstack` which represents special stack where [interrupts](https://en.wikipedia.org/wiki/Interrupt) will be handled on: ```assembly movl $MSR_GS_BASE,%ecx movl initial_gs(%rip),%eax movl initial_gs+4(%rip),%edx wrmsr ``` where `MSR_GS_BASE` is: ```C #define MSR_GS_BASE 0xc0000101 ``` We need to put `MSR_GS_BASE` to the `ecx` register and load data from the `eax` and `edx` (which are point to the `initial_gs`) with `wrmsr` instruction. We don't use `cs`, `fs`, `ds` and `ss` segment registers for addressing in the 64-bit mode, but `fs` and `gs` registers can be used. `fs` and `gs` have a hidden part (as we saw it in the real mode for `cs`) and this part contains descriptor which mapped to [Model Specific Registers](https://en.wikipedia.org/wiki/Model-specific_register). So we can see above `0xc0000101` is a `gs.base` MSR address. When a [system call](https://en.wikipedia.org/wiki/System_call) or [interrupt](https://en.wikipedia.org/wiki/Interrupt) occurred, there is no kernel stack at the entry point, so the value of the `MSR_GS_BASE` will store address of the interrupt stack. In the next step we put the address of the real mode bootparam structure to the `rdi` (remember `rsi` holds pointer to this structure from the start) and jump to the C code with: ```assembly movq initial_code(%rip),%rax pushq $0 pushq $__KERNEL_CS pushq %rax lretq ``` Here we put the address of the `initial_code` to the `rax` and push fake address, `__KERNEL_CS` and the address of the `initial_code` to the stack. After this we can see `lretq` instruction which means that after it return address will be extracted from stack (now there is address of the `initial_code`) and jump there. `initial_code` is defined in the same source code file and looks: ```assembly .balign 8 GLOBAL(initial_code) .quad x86_64_start_kernel ... ... ... ``` As we can see `initial_code` contains address of the `x86_64_start_kernel`, which is defined in the [arch/x86/kerne/head64.c](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/head64.c) and looks like this: ```C asmlinkage __visible void __init x86_64_start_kernel(char * real_mode_data) { ... ... ... } ``` It has one argument is a `real_mode_data` (remember that we passed address of the real mode data to the `rdi` register previously). This is first C code in the kernel! Next to start_kernel -------------------------------------------------------------------------------- We need to see last preparations before we can see "kernel entry point" - start_kernel function from the [init/main.c](https://github.com/torvalds/linux/blob/master/init/main.c#L489). First of all we can see some checks in the `x86_64_start_kernel` function: ```C BUILD_BUG_ON(MODULES_VADDR < __START_KERNEL_map); BUILD_BUG_ON(MODULES_VADDR - __START_KERNEL_map < KERNEL_IMAGE_SIZE); BUILD_BUG_ON(MODULES_LEN + KERNEL_IMAGE_SIZE > 2*PUD_SIZE); BUILD_BUG_ON((__START_KERNEL_map & ~PMD_MASK) != 0); BUILD_BUG_ON((MODULES_VADDR & ~PMD_MASK) != 0); BUILD_BUG_ON(!(MODULES_VADDR > __START_KERNEL)); BUILD_BUG_ON(!(((MODULES_END - 1) & PGDIR_MASK) == (__START_KERNEL & PGDIR_MASK))); BUILD_BUG_ON(__fix_to_virt(__end_of_fixed_addresses) <= MODULES_END); ``` There are checks for different things like virtual addresses of modules space is not fewer than base address of the kernel text - `__STAT_KERNEL_map`, that kernel text with modules is not less than image of the kernel and etc... `BUILD_BUG_ON` is a macro which looks as: ```C #define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)])) ``` Let's try to understand how this trick works. Let's take for example first condition: `MODULES_VADDR < __START_KERNEL_map`. `!!conditions` is the same that `condition != 0`. So it means if `MODULES_VADDR < __START_KERNEL_map` is true, we will get `1` in the `!!(condition)` or zero if not. After `2*!!(condition)` we will get or `2` or `0`. In the end of calculations we can get two different behaviors: * We will have compilation error, because try to get size of the char array with negative index (as can be in our case, because `MODULES_VADDR` can't be less than `__START_KERNEL_map` will be in our case); * No compilation errors. That's all. So interesting C trick for getting compile error which depends on some constants. In the next step we can see call of the `cr4_init_shadow` function which stores shadow copy of the `cr4` per cpu. Context switches can change bits in the `cr4` so we need to store `cr4` for each CPU. And after this we can see call of the `reset_early_page_tables` function where we resets all page global directory entries and write new pointer to the PGT in `cr3`: ```C for (i = 0; i < PTRS_PER_PGD-1; i++) early_level4_pgt[i].pgd = 0; next_early_pgt = 0; write_cr3(__pa_nodebug(early_level4_pgt)); ``` Soon we will build new page tables. Here we can see that we go through all Page Global Directory Entries (`PTRS_PER_PGD` is `512`) in the loop and make it zero. After this we set `next_early_pgt` to zero (we will see details about it in the next post) and write physical address of the `early_level4_pgt` to the `cr3`. `__pa_nodebug` is a macro which will be expanded to: ```C ((unsigned long)(x) - __START_KERNEL_map + phys_base) ``` After this we clear `_bss` from the `__bss_stop` to `__bss_start` and the next step will be setup of the early `IDT` handlers, but it's big concept so we will see it in the next part. Conclusion -------------------------------------------------------------------------------- This is the end of the first part about linux kernel initialization. If you have questions or suggestions, feel free to ping me in twitter [0xAX](https://twitter.com/0xAX), drop me [email](anotherworldofworld@gmail.com) or just create [issue](https://github.com/0xAX/linux-insides/issues/new). In the next part we will see initialization of the early interruption handlers, kernel space memory mapping and a lot more. **Please note that English is not my first language and I am really sorry for any inconvenience. If you found any mistakes please send me PR to [linux-insides](https://github.com/0xAX/linux-insides).** Links -------------------------------------------------------------------------------- * [Model Specific Register](http://en.wikipedia.org/wiki/Model-specific_register) * [Paging](http://0xax.gitbooks.io/linux-insides/content/Theory/Paging.html) * [Previous part - Kernel decompression](http://0xax.gitbooks.io/linux-insides/content/Booting/linux-bootstrap-5.html) * [NX](http://en.wikipedia.org/wiki/NX_bit) * [ASLR](http://en.wikipedia.org/wiki/Address_space_layout_randomization)