@ -226,7 +226,7 @@ Early initialization of `cgroups` starts from the call of the:
cgroup_init_early();
```
function in the [init/main.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/init/main.c) during early initialization of the Linux kernel. This function is defined in the [kernel/cgroup.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/kernel/cgroup.c) source code file and starts from the definition of two following local variables:
function in the [init/main.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/init/main.c) during early initialization of the Linux kernel. This function is defined in the [kernel/cgroup/cgroup.c](https://github.com/torvalds/linux/blob/master/kernel/cgroup/cgroup.c) source code file and starts from the definition of two following local variables:
```C
int __init cgroup_init_early(void)
@ -378,7 +378,7 @@ for_each_subsys(ss, i) {
}
```
The `for_each_subsys` here is a macro which is defined in the [kernel/cgroup.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/kernel/cgroup.c) source code file and just expands to the `for` loop over `cgroup_subsys` array. Definition of this array may be found in the same source code file and it looks in a little unusual way:
The `for_each_subsys` here is a macro which is defined in the [kernel/cgroup/cgroup.c](https://github.com/torvalds/linux/blob/master/kernel/cgroup/cgroup.c) source code file and just expands to the `for` loop over `cgroup_subsys` array. Definition of this array may be found in the same source code file and it looks in a little unusual way:
This works because of `#undef` statement after first definition of the `SUBSYS` macro. Look at the `&_x ## _cgrp_subsys` expression. The `##` operator concatenates right and left expression in a `C` macro. So as we passed `cpuset`, `cpu` and etc., to the `SUBSYS` macro, somewhere `cpuset_cgrp_subsys`, `cpu_cgrp_subsys` should be defined. And that's true. If you will look in the [kernel/cpuset.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/kernel/cpuset.c) source code file, you will see this definition:
This works because of `#undef` statement after first definition of the `SUBSYS` macro. Look at the `&_x ## _cgrp_subsys` expression. The `##` operator concatenates right and left expression in a `C` macro. So as we passed `cpuset`, `cpu` and etc., to the `SUBSYS` macro, somewhere `cpuset_cgrp_subsys`, `cpu_cgrp_subsys` should be defined. And that's true. If you will look in the [kernel/cgroup/cpuset.c](https://github.com/torvalds/linux/blob/master/kernel/cgroup/cpuset.c) source code file, you will see this definition:
more about credentials you can read in the [Documentation/security/credentials.txt](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/Documentation/security/credentials.txt). Next step is the `fork_init` function from the [kernel/fork.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/kernel/fork.c). The `fork_init` function allocates cache for the `task_struct`. Let's look on the implementation of the `fork_init`. First of all we can see definitions of the `ARCH_MIN_TASKALIGN` macro and creation of a slab where task_structs will be allocated:
more about credentials you can read in the [Documentation/security/credentials.txt](https://github.com/torvalds/linux/blob/master/Documentation/security/credentials.rst). Next step is the `fork_init` function from the [kernel/fork.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/kernel/fork.c). The `fork_init` function allocates cache for the `task_struct`. Let's look on the implementation of the `fork_init`. First of all we can see definitions of the `ARCH_MIN_TASKALIGN` macro and creation of a slab where task_structs will be allocated:
where `idle` class is a low task priority and tasks can be run only when the processor doesn't have anything to run besides this tasks. The second function `schedule_preempt_disabled` disables preempt in `idle` tasks. And the third function `cpu_startup_entry` is defined in the [kernel/sched/idle.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/sched/idle.c) and calls `cpu_idle_loop` from the [kernel/sched/idle.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/sched/idle.c). The `cpu_idle_loop` function works as process with `PID = 0` and works in the background. Main purpose of the `cpu_idle_loop` is to consume the idle CPU cycles. When there is no process to run, this process starts to work. We have one process with `idle` scheduling class (we just set the `current` task to the `idle` with the call of the `init_idle_bootup_task` function), so the `idle` thread does not do useful work but just checks if there is an active task to switch to:
where `idle` class is a low task priority and tasks can be run only when the processor doesn't have anything to run besides this tasks. The second function `schedule_preempt_disabled` disables preempt in `idle` tasks. And the third function `cpu_startup_entry` is defined in the [kernel/sched/idle.c](https://github.com/torvalds/linux/blob/master/kernel/sched/idle.c) and calls `cpu_idle_loop` from the [kernel/sched/idle.c](https://github.com/torvalds/linux/blob/master/kernel/sched/idle.c). The `cpu_idle_loop` function works as process with `PID = 0` and works in the background. Main purpose of the `cpu_idle_loop` is to consume the idle CPU cycles. When there is no process to run, this process starts to work. We have one process with `idle` scheduling class (we just set the `current` task to the `idle` with the call of the `init_idle_bootup_task` function), so the `idle` thread does not do useful work but just checks if there is an active task to switch to:
`memblock_reserve` function is defined at [mm/block.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/mm/block.c) and takes two parameters:
`memblock_reserve` function is defined at [mm/memblock.c](https://github.com/torvalds/linux/blob/master/mm/memblock.c) and takes two parameters:
The next step is architecture-specific initialization. The Linux kernel does it with the call of the `setup_arch` function. This is a very big function like `start_kernel` and we do not have time to consider all of its implementation in this part. Here we'll only start to do it and continue in the next part. As it is `architecture-specific`, we need to go again to the `arch/` directory. The `setup_arch` function defined in the [arch/x86/kernel/setup.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/kernel/setup.c) source code file and takes only one argument - address of the kernel command line.
The next step is architecture-specific initialization. The Linux kernel does it with the call of the `setup_arch` function. This is a very big function like `start_kernel` and we do not have time to consider all of its implementation in this part. Here we'll only start to do it and continue in the next part. As it is `architecture-specific`, we need to go again to the `arch/` directory. The `setup_arch` function defined in the [arch/x86/kernel/setup.c](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/setup.c) source code file and takes only one argument - address of the kernel command line.
This function starts from the reserving memory block for the kernel `_text` and `_data` which starts from the `_text` symbol (you can remember it from the [arch/x86/kernel/head_64.S](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/kernel/head_64.S#L46)) and ends before `__bss_stop`. We are using `memblock` for the reserving of memory block:
* paranoid - if this parameter = 1, switch to special stack (read above);
* shift_ist - stack to switch during interrupt.
Now let's look on `idtentry` macro implementation. This macro defined in the same assembly file and defines `debug` function with the `ENTRY` macro. For the start `idtentry` macro checks that given parameters are correct in case if need to switch to the special stack. In the next step it checks that give interrupt returns error code. If interrupt does not return error code (in our case `#DB` does not return error code), it calls `INTR_FRAME` or `XCPT_FRAME` if interrupt has error code. Both of these macros `XCPT_FRAME` and `INTR_FRAME` do nothing and need only for the building initial frame state for interrupts. They uses `CFI` directives and used for debugging. More info you can find in the [CFI directives](https://sourceware.org/binutils/docs/as/CFI-directives.html). As comment from the [arch/x86/kernel/entry_64.S](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/kernel/entry_64.S) says: `CFI macros are used to generate dwarf2 unwind information for better backtraces. They don't change any code.` so we will ignore them.
Now let's look on `idtentry` macro implementation. This macro defined in the same assembly file and defines `debug` function with the `ENTRY` macro. For the start `idtentry` macro checks that given parameters are correct in case if need to switch to the special stack. In the next step it checks that give interrupt returns error code. If interrupt does not return error code (in our case `#DB` does not return error code), it calls `INTR_FRAME` or `XCPT_FRAME` if interrupt has error code. Both of these macros `XCPT_FRAME` and `INTR_FRAME` do nothing and need only for the building initial frame state for interrupts. They uses `CFI` directives and used for debugging. More info you can find in the [CFI directives](https://sourceware.org/binutils/docs/as/CFI-directives.html). As comment from the [arch/x86/kernel/entry/entry_64.S](https://github.com/torvalds/linux/blob/master/arch/x86/entry/entry_64.S) says: `CFI macros are used to generate dwarf2 unwind information for better backtraces. They don't change any code.` so we will ignore them.
@ -126,7 +126,7 @@ We need to do it as `dummy` error code for stack consistency for all interrupts.
subq $ORIG_RAX-R15, %rsp
```
where `ORIRG_RAX`, `R15` and other macros defined in the [arch/x86/include/asm/calling.h](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/include/asm/calling.h) and `ORIG_RAX-R15` is 120 bytes. General purpose registers will occupy these 120 bytes because we need to store all registers on the stack during interrupt handling. After we set stack for general purpose registers, the next step is checking that interrupt came from userspace with:
where `ORIRG_RAX`, `R15` and other macros defined in the [arch/x86/entry/calling.h](https://github.com/torvalds/linux/blob/master/arch/x86/entry/calling.h) and `ORIG_RAX-R15` is 120 bytes. General purpose registers will occupy these 120 bytes because we need to store all registers on the stack during interrupt handling. After we set stack for general purpose registers, the next step is checking that interrupt came from userspace with:
```assembly
testl $3, CS(%rsp)
@ -466,7 +466,7 @@ We already know a little about `resource` structure (read above). Here we fills
01a11000-01ac3fff : Kernel bss
```
All of these structures are defined in the [arch/x86/kernel/setup.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/kernel/setup.c) and look like typical resource initialization:
All of these structures are defined in the [arch/x86/kernel/setup.c](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/setup.c) and look like typical resource initialization:
In the previous [part](https://0xax.gitbook.io/linux-insides/summary/initialization/linux-initialization-5) we saw architecture-specific (`x86_64` in our case) initialization stuff from the [arch/x86/kernel/setup.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/kernel/setup.c) and finished on `x86_configure_nx` function which sets the `_PAGE_NX` flag depends on support of [NX bit](http://en.wikipedia.org/wiki/NX_bit). As I wrote before `setup_arch` function and `start_kernel` are very big, so in this and in the next part we will continue to learn about architecture-specific initialization process. The next function after `x86_configure_nx` is `parse_early_param`. This function is defined in the [init/main.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/init/main.c) and as you can understand from its name, this function parses kernel command line and setups different services depends on the given parameters (all kernel command line parameters you can find are in the [Documentation/kernel-parameters.txt](https://github.com/torvalds/linux/blob/master/Documentation/admin-guide/kernel-parameters.rst)). You may remember how we setup `earlyprintk` in the earliest [part](https://0xax.gitbook.io/linux-insides/summary/booting/linux-bootstrap-2). On the early stage we looked for kernel parameters and their value with the `cmdline_find_option` function and `__cmdline_find_option`, `__cmdline_find_option_bool` helpers from the [arch/x86/boot/cmdline.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/boot/cmdline.c). There we're in the generic kernel part which does not depend on architecture and here we use another approach. If you are reading linux kernel source code, you already note calls like this:
In the previous [part](https://0xax.gitbook.io/linux-insides/summary/initialization/linux-initialization-5) we saw architecture-specific (`x86_64` in our case) initialization stuff from the [arch/x86/kernel/setup.c](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/setup.c) and finished on `x86_configure_nx` function which sets the `_PAGE_NX` flag depends on support of [NX bit](http://en.wikipedia.org/wiki/NX_bit). As I wrote before `setup_arch` function and `start_kernel` are very big, so in this and in the next part we will continue to learn about architecture-specific initialization process. The next function after `x86_configure_nx` is `parse_early_param`. This function is defined in the [init/main.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/init/main.c) and as you can understand from its name, this function parses kernel command line and setups different services depends on the given parameters (all kernel command line parameters you can find are in the [Documentation/kernel-parameters.txt](https://github.com/torvalds/linux/blob/master/Documentation/admin-guide/kernel-parameters.rst)). You may remember how we setup `earlyprintk` in the earliest [part](https://0xax.gitbook.io/linux-insides/summary/booting/linux-bootstrap-2). On the early stage we looked for kernel parameters and their value with the `cmdline_find_option` function and `__cmdline_find_option`, `__cmdline_find_option_bool` helpers from the [arch/x86/boot/cmdline.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/boot/cmdline.c). There we're in the generic kernel part which does not depend on architecture and here we use another approach. If you are reading linux kernel source code, you already note calls like this:
The `parse_early_param` function defines two static variables. First `done` check that `parse_early_param` already called and the second is temporary storage for kernel command line. After this we copy `boot_command_line` to the temporary command line which we just defined and call the `parse_early_options` function from the same source code `main.c` file. `parse_early_options` calls the `parse_args` function from the [kernel/params.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/) where `parse_args` parses given command line and calls `do_early_param` function. This [function](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/init/main.c#L413) goes from the ` __setup_start` to `__setup_end`, and calls the function from the `obs_kernel_param` if a parameter is early. After this all services which are depend on early command line parameters were setup and the next call after the `parse_early_param` is `x86_report_nx`. As I wrote in the beginning of this part, we already set `NX-bit` with the `x86_configure_nx`. The next `x86_report_nx` function from the [arch/x86/mm/setup_nx.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/mm/setup_nx.c) just prints information about the `NX`. Note that we call `x86_report_nx` not right after the `x86_configure_nx`, but after the call of the `parse_early_param`. The answer is simple: we call it after the `parse_early_param` because the kernel support `noexec` parameter:
The `parse_early_param` function defines two static variables. First `done` check that `parse_early_param` already called and the second is temporary storage for kernel command line. After this we copy `boot_command_line` to the temporary command line which we just defined and call the `parse_early_options` function from the same source code `main.c` file. `parse_early_options` calls the `parse_args` function from the [kernel/params.c](https://github.com/torvalds/linux) where `parse_args` parses given command line and calls `do_early_param` function. This [function](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/init/main.c#L413) goes from the ` __setup_start` to `__setup_end`, and calls the function from the `obs_kernel_param` if a parameter is early. After this all services which are depend on early command line parameters were setup and the next call after the `parse_early_param` is `x86_report_nx`. As I wrote in the beginning of this part, we already set `NX-bit` with the `x86_configure_nx`. The next `x86_report_nx` function from the [arch/x86/mm/setup_nx.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/mm/setup_nx.c) just prints information about the `NX`. Note that we call `x86_report_nx` not right after the `x86_configure_nx`, but after the call of the `parse_early_param`. The answer is simple: we call it after the `parse_early_param` because the kernel support `noexec` parameter:
```
noexec [X86]
@ -97,7 +97,7 @@ After this we can see call of the:
memblock_x86_reserve_range_setup_data();
```
function. This function is defined in the same [arch/x86/kernel/setup.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/kernel/setup.c) source code file and remaps memory for the `setup_data` and reserved memory block for the `setup_data` (more about `setup_data` you can read in the previous [part](https://0xax.gitbook.io/linux-insides/summary/initialization/linux-initialization-5) and about `ioremap` and `memblock` you can read in the [Linux kernel memory management](https://0xax.gitbook.io/linux-insides/summary/mm)).
function. This function is defined in the same [arch/x86/kernel/setup.c](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/setup.c) source code file and remaps memory for the `setup_data` and reserved memory block for the `setup_data` (more about `setup_data` you can read in the previous [part](https://0xax.gitbook.io/linux-insides/summary/initialization/linux-initialization-5) and about `ioremap` and `memblock` you can read in the [Linux kernel memory management](https://0xax.gitbook.io/linux-insides/summary/mm)).
In the next step we can see following conditional statement:
@ -222,7 +222,7 @@ if (boot_cpu_data.cpuid_level >= 0) {
}
```
The next function which you can see is `map_vsyscal` from the [arch/x86/kernel/vsyscall_64.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/kernel/vsyscall_64.c). This function maps memory space for [vsyscalls](https://lwn.net/Articles/446528/) and depends on `CONFIG_X86_VSYSCALL_EMULATION` kernel configuration option. Actually `vsyscall` is a special segment which provides fast access to the certain system calls like `getcpu`, etc. Let's look on implementation of this function:
The next function which you can see is `map_vsyscal` from the [arch/x86/entry/vsyscall/vsyscall_64.c](https://github.com/torvalds/linux/blob/master/arch/x86/entry/vsyscall/vsyscall_64.c). This function maps memory space for [vsyscalls](https://lwn.net/Articles/446528/) and depends on `CONFIG_X86_VSYSCALL_EMULATION` kernel configuration option. Actually `vsyscall` is a special segment which provides fast access to the certain system calls like `getcpu`, etc. Let's look on implementation of this function:
```C
void __init map_vsyscall(void)
@ -241,7 +241,7 @@ void __init map_vsyscall(void)
}
```
In the beginning of the `map_vsyscall` we can see definition of two variables. The first is extern variable `__vsyscall_page`. As a extern variable, it defined somewhere in other source code file. Actually we can see definition of the `__vsyscall_page` in the [arch/x86/kernel/vsyscall_emu_64.S](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/kernel/vsyscall_emu_64.S). The `__vsyscall_page` symbol points to the aligned calls of the `vsyscalls` as `gettimeofday`, etc.:
In the beginning of the `map_vsyscall` we can see definition of two variables. The first is extern variable `__vsyscall_page`. As a extern variable, it defined somewhere in other source code file. Actually we can see definition of the `__vsyscall_page` in the [arch/x86/entry/vsyscall/vsyscall_emu_64.S](https://github.com/torvalds/linux/blob/master/arch/x86/entry/vsyscall/vsyscall_emu_64.S). The `__vsyscall_page` symbol points to the aligned calls of the `vsyscalls` as `gettimeofday`, etc.:
@ -91,7 +91,7 @@ Here we can see the call of the `kmem_cache_create`. We already called the `kmem
* flags;
* constructor for the objects.
and it will create `kmem_cache` for the integer IDs. Integer `IDs` is commonly used pattern to map set of integer IDs to the set of pointers. We can see usage of the integer IDs in the [i2c](http://en.wikipedia.org/wiki/I%C2%B2C) drivers subsystem. For example [drivers/i2c/i2c-core.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/drivers/i2c/i2c-core.c) which represents the core of the `i2c` subsystem defines `ID` for the `i2c` adapter with the `DEFINE_IDR` macro:
and it will create `kmem_cache` for the integer IDs. Integer `IDs` is commonly used pattern to map set of integer IDs to the set of pointers. We can see usage of the integer IDs in the [i2c](http://en.wikipedia.org/wiki/I%C2%B2C) drivers subsystem. For example [drivers/i2c/i2c-core-base.c](https://github.com/torvalds/linux/blob/master/drivers/i2c/i2c-core-base.c) which represents the core of the `i2c` subsystem defines `ID` for the `i2c` adapter with the `DEFINE_IDR` macro:
@ -316,7 +316,7 @@ Here we iterate over all the cleared bit of the `used_vectors` bitmap starting a
int first_system_vector = FIRST_SYSTEM_VECTOR; // 0xef
```
and set interrupt gates with the `i` vector number and the `irq_entries_start + 8 * (i - FIRST_EXTERNAL_VECTOR)` start address. Only one thing is unclear here - the `irq_entries_start`. This symbol defined in the [arch/x86/entry/entry_64.S](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/entry_entry_64.S) assembly file and provides `irq` entries. Let's look at it:
and set interrupt gates with the `i` vector number and the `irq_entries_start + 8 * (i - FIRST_EXTERNAL_VECTOR)` start address. Only one thing is unclear here - the `irq_entries_start`. This symbol defined in the [arch/x86/entry/entry_64.S](https://github.com/torvalds/linux/blob/master/arch/x86/entry/entry_64.S) assembly file and provides `irq` entries. Let's look at it:
```assembly
.align 8
@ -413,7 +413,7 @@ We already know that when an `IRQ` finishes its work, deferred interrupts will b
Ok, the interrupt handler finished its execution and now we must return from the interrupt. When the work of the `do_IRQ` function will be finsihed, we will return back to the assembler code in the [arch/x86/entry/entry_64.S](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/entry_entry_64.S) to the `ret_from_intr` label. First of all we disable interrupts with the `DISABLE_INTERRUPTS` macro that expands to the `cli` instruction and decreases value of the `irq_count` [per-cpu](https://0xax.gitbook.io/linux-insides/summary/concepts/linux-cpu-1) variable. Remember, this variable had value - `1`, when we were in interrupt context:
Ok, the interrupt handler finished its execution and now we must return from the interrupt. When the work of the `do_IRQ` function will be finsihed, we will return back to the assembler code in the [arch/x86/entry/entry_64.S](https://github.com/torvalds/linux/blob/master/arch/x86/entry/entry_64.S) to the `ret_from_intr` label. First of all we disable interrupts with the `DISABLE_INTERRUPTS` macro that expands to the `cli` instruction and decreases value of the `irq_count` [per-cpu](https://0xax.gitbook.io/linux-insides/summary/concepts/linux-cpu-1) variable. Remember, this variable had value - `1`, when we were in interrupt context:
We already saw this code in the previous [part](https://0xax.gitbook.io/linux-insides/summary/interrupts/linux-interrupts-1). First of all pay attention on the last `wrmsr` instruction. This instruction writes data from the `edx:eax` registers to the [model specific register](http://en.wikipedia.org/wiki/Model-specific_register) specified by the `ecx` register. We can see that `ecx` contains `$MSR_GS_BASE` which is declared in the [arch/x86/include/uapi/asm/msr-index.h](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/include/uapi/asm/msr-index.h) and looks like:
We already saw this code in the previous [part](https://0xax.gitbook.io/linux-insides/summary/interrupts/linux-interrupts-1). First of all pay attention on the last `wrmsr` instruction. This instruction writes data from the `edx:eax` registers to the [model specific register](http://en.wikipedia.org/wiki/Model-specific_register) specified by the `ecx` register. We can see that `ecx` contains `$MSR_GS_BASE` which is declared in the [arch/x86/include/asm/msr-index.h](https://github.com/torvalds/linux/blob/master/arch/x86/include/asm/msr-index.h) and looks like:
```C
#define MSR_GS_BASE 0xc0000101
@ -149,7 +149,7 @@ where:
endif
```
So, we are accessing `gs:irq_stack_union` and getting its type which is `irq_union`. Ok, we defined the first variable and know its address, now let's look at the second `__per_cpu_load` symbol. There are a couple of `per-cpu` variables which are located after this symbol. The `__per_cpu_load` is defined in the [include/asm-generic/sections.h](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/include/asm-generic-sections.h):
So, we are accessing `gs:irq_stack_union` and getting its type which is `irq_union`. Ok, we defined the first variable and know its address, now let's look at the second `__per_cpu_load` symbol. There are a couple of `per-cpu` variables which are located after this symbol. The `__per_cpu_load` is defined in the [include/asm-generic/sections.h](https://github.com/torvalds/linux/blob/master/include/asm-generic/sections.h):
and just calls `trace_hardirqs_off_caller` function. The `trace_hardirqs_off_caller` checks the `hardirqs_enabled` field of the current process and increases the `redundant_hardirqs_off` if call of the `local_irq_disable` was redundant or the `hardirqs_off_events` if it was not. These two fields and other `lockdep` statistic related fields are defined in the [kernel/locking/lockdep_insides.h](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/kernel/locking/lockdep_insides.h) and located in the `lockdep_stats` structure:
and just calls `trace_hardirqs_off_caller` function. The `trace_hardirqs_off_caller` checks the `hardirqs_enabled` field of the current process and increases the `redundant_hardirqs_off` if call of the `local_irq_disable` was redundant or the `hardirqs_off_events` if it was not. These two fields and other `lockdep` statistic related fields are defined in the [kernel/locking/lockdep_internals.h](https://github.com/torvalds/linux/blob/master/kernel/locking/lockdep_internals.h) and located in the `lockdep_stats` structure:
The next functions after the `local_disable_irq` are `boot_cpu_init` and `page_address_init`, but they are not related to the interrupts and exceptions (more about this functions you can read in the chapter about Linux kernel [initialization process](https://0xax.gitbook.io/linux-insides/summary/initialization)). The next is the `setup_arch` function. As you can remember this function located in the [arch/x86/kernel/setup.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/kernel.setup.c) source code file and makes initialization of many different architecture-dependent [stuff](https://0xax.gitbook.io/linux-insides/summary/initialization/linux-initialization-4). The first interrupts related function which we can see in the `setup_arch` is the - `early_trap_init` function. This function defined in the [arch/x86/kernel/traps.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/kernel/traps.c) and fills `Interrupt Descriptor Table` with the couple of entries:
The next functions after the `local_disable_irq` are `boot_cpu_init` and `page_address_init`, but they are not related to the interrupts and exceptions (more about this functions you can read in the chapter about Linux kernel [initialization process](https://0xax.gitbook.io/linux-insides/summary/initialization)). The next is the `setup_arch` function. As you can remember this function located in the [arch/x86/kernel/setup.c](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/setup.c) source code file and makes initialization of many different architecture-dependent [stuff](https://0xax.gitbook.io/linux-insides/summary/initialization/linux-initialization-4). The first interrupts related function which we can see in the `setup_arch` is the - `early_trap_init` function. This function defined in the [arch/x86/kernel/traps.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/kernel/traps.c) and fills `Interrupt Descriptor Table` with the couple of entries:
Each exception handler may be consists from two parts. The first part is generic part and it is the same for all exception handlers. An exception handler should to save [general purpose registers](https://en.wikipedia.org/wiki/Processor_register) on the stack, switch to kernel stack if an exception came from userspace and transfer control to the second part of an exception handler. The second part of an exception handler does certain work depends on certain exception. For example page fault exception handler should find virtual page for given address, invalid opcode exception handler should send `SIGILL` [signal](https://en.wikipedia.org/wiki/Unix_signal) and etc.
As we just saw, an exception handler starts from definition of the `idtentry` macro from the [arch/x86/kernel/entry_64.S](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/kernel/entry_64.S) assembly source code file, so let's look at implementation of this macro. As we may see, the `idtentry` macro takes five arguments:
As we just saw, an exception handler starts from definition of the `idtentry` macro from the [arch/x86/entry/entry_64.S](https://github.com/torvalds/linux/blob/master/arch/x86/entry/entry_64.S) assembly source code file, so let's look at implementation of this macro. As we may see, the `idtentry` macro takes five arguments:
* `sym` - defines global symbol with the `.globl name` which will be an an entry of exception handler;
* `do_sym` - symbol name which represents a secondary entry of an exception handler;
When the `early_trap_pf_init` will be called, the `set_intr_gate` will be expanded to the call of the `_set_gate` which will fill the `IDT` with the handler for the page fault. Now let's look on the implementation of the `page_fault` handler. The `page_fault` handler defined in the [arch/x86/kernel/entry_64.S](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/kernel/entry_64.S) assembly source code file as all exceptions handlers. Let's look on it:
When the `early_trap_pf_init` will be called, the `set_intr_gate` will be expanded to the call of the `_set_gate` which will fill the `IDT` with the handler for the page fault. Now let's look on the implementation of the `page_fault` handler. The `page_fault` handler defined in the [arch/x86/entry/entry_64.S](https://github.com/torvalds/linux/blob/master/arch/x86/entry/entry_64.S) assembly source code file as all exceptions handlers. Let's look on it:
@ -99,7 +99,7 @@ do_page_fault(struct pt_regs *regs, unsigned long error_code)
}
```
This register contains a linear address which caused `page fault`. In the next step we make a call of the `exception_enter` function from the [include/linux/context_tracking.h](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/include/context_tracking.h). The `exception_enter` and `exception_exit` are functions from context tracking subsystem in the Linux kernel used by the [RCU](https://en.wikipedia.org/wiki/Read-copy-update) to remove its dependency on the timer tick while a processor runs in userspace. Almost in the every exception handler we will see similar code:
This register contains a linear address which caused `page fault`. In the next step we make a call of the `exception_enter` function from the [include/linux/context_tracking.h](https://github.com/torvalds/linux/blob/master/include/linux/context_tracking.h). The `exception_enter` and `exception_exit` are functions from context tracking subsystem in the Linux kernel used by the [RCU](https://en.wikipedia.org/wiki/Read-copy-update) to remove its dependency on the timer tick while a processor runs in userspace. Almost in the every exception handler we will see similar code:
where `INTERRUPT_RETURN` is defined in the [arch/x86/include/irqflags.h](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/include/irqflags.h) and just expands to the `iret` instruction. That's all.
where `INTERRUPT_RETURN` is defined in the [arch/x86/include/asm/irqflags.h](https://github.com/torvalds/linux/blob/master/arch/x86/include/asm/irqflags.h) and just expands to the `iret` instruction. That's all.
Now let's consider case when another `NMI` interrupt occurred when previous `NMI` interrupt didn't finish its execution. You can remember from the beginning of this part that we've made a check that we came from userspace and jump on the `first_nmi` in this case:
@ -301,7 +301,7 @@ In the end of the `early_irq_init` function we return the return value of the `a
return arch_early_irq_init();
```
This function defined in the [kernel/apic/vector.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/kernel/apic/vector.c) and contains only one call of the `arch_early_ioapic_init` function from the [kernel/apic/io_apic.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/kernel/apic/io_apic.c). As we can understand from the `arch_early_ioapic_init` function's name, this function makes early initialization of the [I/O APIC](https://en.wikipedia.org/wiki/Advanced_Programmable_Interrupt_Controller). First of all it make a check of the number of the legacy interrupts with the call of the `nr_legacy_irqs` function. If we have no legacy interrupts with the [Intel 8259](https://en.wikipedia.org/wiki/Intel_8259) programmable interrupt controller we set `io_apic_irqs` to the `0xffffffffffffffff`:
This function defined in the [kernel/apic/vector.c](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/apic/vector.c) and contains only one call of the `arch_early_ioapic_init` function from the [kernel/apic/io_apic.c](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/apic/io_apic.c). As we can understand from the `arch_early_ioapic_init` function's name, this function makes early initialization of the [I/O APIC](https://en.wikipedia.org/wiki/Advanced_Programmable_Interrupt_Controller). First of all it make a check of the number of the legacy interrupts with the call of the `nr_legacy_irqs` function. If we have no legacy interrupts with the [Intel 8259](https://en.wikipedia.org/wiki/Intel_8259) programmable interrupt controller we set `io_apic_irqs` to the `0xffffffffffffffff`:
@ -6,7 +6,7 @@ Non-early initialization of the IRQs
This is the eighth part of the Interrupts and Interrupt Handling in the Linux kernel [chapter](https://0xax.gitbook.io/linux-insides/summary/interrupts) and in the previous [part](https://0xax.gitbook.io/linux-insides/summary/interrupts/linux-interrupts-7) we started to dive into the external hardware [interrupts](https://en.wikipedia.org/wiki/Interrupt_request_%28PC_architecture%29). We looked on the implementation of the `early_irq_init` function from the [kernel/irq/irqdesc.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/kernel/irq/irqdesc.c) source code file and saw the initialization of the `irq_desc` structure in this function. Remind that `irq_desc` structure (defined in the [include/linux/irqdesc.h](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/include/linux/irqdesc.h#L46) is the foundation of interrupt management code in the Linux kernel and represents an interrupt descriptor. In this part we will continue to dive into the initialization stuff which is related to the external hardware interrupts.
Right after the call of the `early_irq_init` function in the [init/main.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/init/main.c) we can see the call of the `init_IRQ` function. This function is architecture-specific and defined in the [arch/x86/kernel/irqinit.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/kernel/irqinit.c). The `init_IRQ` function makes initialization of the `vector_irq` [percpu](https://0xax.gitbook.io/linux-insides/summary/concepts/linux-cpu-1) variable that defined in the same [arch/x86/kernel/irqinit.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/kernel/irqinit.c) source code file:
Right after the call of the `early_irq_init` function in the [init/main.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/init/main.c) we can see the call of the `init_IRQ` function. This function is architecture-specific and defined in the [arch/x86/kernel/irqinit.c](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/irqinit.c). The `init_IRQ` function makes initialization of the `vector_irq` [percpu](https://0xax.gitbook.io/linux-insides/summary/concepts/linux-cpu-1) variable that defined in the same [arch/x86/kernel/irqinit.c](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/irqinit.c) source code file:
Now, we are interesting in the `native_init_IRQ`. As we can note, the name of the `native_init_IRQ` function contains the `native_` prefix which means that this function is architecture-specific. It defined in the [arch/x86/kernel/irqinit.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/kernel/irqinit.c) and executes general initialization of the [Local APIC](https://en.wikipedia.org/wiki/Advanced_Programmable_Interrupt_Controller#Integrated_local_APICs) and initialization of the [ISA](https://en.wikipedia.org/wiki/Industry_Standard_Architecture) irqs. Let's look on the implementation of the `native_init_IRQ` function and will try to understand what occurs there. The `native_init_IRQ` function starts from the execution of the following function:
Now, we are interesting in the `native_init_IRQ`. As we can note, the name of the `native_init_IRQ` function contains the `native_` prefix which means that this function is architecture-specific. It defined in the [arch/x86/kernel/irqinit.c](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/irqinit.c) and executes general initialization of the [Local APIC](https://en.wikipedia.org/wiki/Advanced_Programmable_Interrupt_Controller#Integrated_local_APICs) and initialization of the [ISA](https://en.wikipedia.org/wiki/Industry_Standard_Architecture) irqs. Let's look on the implementation of the `native_init_IRQ` function and will try to understand what occurs there. The `native_init_IRQ` function starts from the execution of the following function:
```C
x86_init.irqs.pre_vector_init();
```
As we can see above, the `pre_vector_init` points to the `init_ISA_irqs` function that defined in the same [source code](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/kernel/irqinit.c) file and as we can understand from the function's name, it makes initialization of the `ISA` related interrupts. The `init_ISA_irqs` function starts from the definition of the `chip` variable which has a `irq_chip` type:
As we can see above, the `pre_vector_init` points to the `init_ISA_irqs` function that defined in the same [source code](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/irqinit.c) file and as we can understand from the function's name, it makes initialization of the `ISA` related interrupts. The `init_ISA_irqs` function starts from the definition of the `chip` variable which has a `irq_chip` type:
```C
void __init init_ISA_irqs(void)
@ -253,7 +253,7 @@ if (!test_bit(vector, used_vectors)) {
}
```
We already saw the `set_bit` macro, now let's look on the `test_bit` and the `first_system_vector`. The first `test_bit` macro defined in the [arch/x86/include/asm/bitops.h](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/include/bitops.h) and looks like this:
We already saw the `set_bit` macro, now let's look on the `test_bit` and the `first_system_vector`. The first `test_bit` macro defined in the [arch/x86/include/asm/bitops.h](https://github.com/torvalds/linux/blob/master/arch/x86/include/asm/bitops.h) and looks like this:
Where the `spurious_interrupt` function represent interrupt handler for the `spurious` interrupt. Here the `used_vectors` is the `unsigned long` that contains already initialized interrupt gates. We already filled first `32` interrupt vectors in the `trap_init` function from the [arch/x86/kernel/setup.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/kernel/setup.c) source code file:
Where the `spurious_interrupt` function represent interrupt handler for the `spurious` interrupt. Here the `used_vectors` is the `unsigned long` that contains already initialized interrupt gates. We already filled first `32` interrupt vectors in the `trap_init` function from the [arch/x86/kernel/setup.c](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/setup.c) source code file:
```C
for (i = 0; i <FIRST_EXTERNAL_VECTOR;i++)
@ -408,7 +408,7 @@ if (!acpi_ioapic && !of_ioapic && nr_legacy_irqs())
setup_irq(2, &irq2);
```
First of all let's deal with the condition. The `acpi_ioapic` variable represents existence of [I/O APIC](https://en.wikipedia.org/wiki/Advanced_Programmable_Interrupt_Controller#I.2FO_APICs). It defined in the [arch/x86/kernel/acpi/boot.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/kernel/acpi/boot.c). This variable set in the `acpi_set_irq_model_ioapic` function that called during the processing `Multiple APIC Description Table`. This occurs during initialization of the architecture-specific stuff in the [arch/x86/kernel/setup.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/kernel/setup.c) (more about it we will know in the other chapter about [APIC](https://en.wikipedia.org/wiki/Advanced_Programmable_Interrupt_Controller)). Note that the value of the `acpi_ioapic` variable depends on the `CONFIG_ACPI` and `CONFIG_X86_LOCAL_APIC` Linux kernel configuration options. If these options did not set, this variable will be just zero:
First of all let's deal with the condition. The `acpi_ioapic` variable represents existence of [I/O APIC](https://en.wikipedia.org/wiki/Advanced_Programmable_Interrupt_Controller#I.2FO_APICs). It defined in the [arch/x86/kernel/acpi/boot.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/kernel/acpi/boot.c). This variable set in the `acpi_set_irq_model_ioapic` function that called during the processing `Multiple APIC Description Table`. This occurs during initialization of the architecture-specific stuff in the [arch/x86/kernel/setup.c](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/setup.c) (more about it we will know in the other chapter about [APIC](https://en.wikipedia.org/wiki/Advanced_Programmable_Interrupt_Controller)). Note that the value of the `acpi_ioapic` variable depends on the `CONFIG_ACPI` and `CONFIG_X86_LOCAL_APIC` Linux kernel configuration options. If these options did not set, this variable will be just zero:
@ -256,7 +256,7 @@ e0000000-feafffff : PCI Bus 0000:00
...
```
Part of these addresses are from the call of the `e820_reserve_resources` function. We can find a call to this function in the [arch/x86/kernel/setup.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/kernel/setup.c) and the function itself is defined in [arch/x86/kernel/e820.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/kernel/e820.c). `e820_reserve_resources` goes through the [e820](http://en.wikipedia.org/wiki/E820) map and inserts memory regions into the root `iomem` resource structure. All `e820` memory regions which are inserted into the `iomem` resource have the following types:
Part of these addresses are from the call of the `e820_reserve_resources` function. We can find a call to this function in the [arch/x86/kernel/setup.c](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/setup.c) and the function itself is defined in [arch/x86/kernel/e820.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/kernel/e820.c). `e820_reserve_resources` goes through the [e820](http://en.wikipedia.org/wiki/E820) map and inserts memory regions into the root `iomem` resource structure. All `e820` memory regions which are inserted into the `iomem` resource have the following types:
The `pmd_populate_kernel` function is defined in the [arch/x86/include/asm/pgalloc.h](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/include/asm/pgalloc.) and populates the page middle directory (`pmd`) provided as an argument with the given page table entries (`bm_pte`):
The `pmd_populate_kernel` function is defined in the [arch/x86/include/asm/pgalloc.h](https://github.com/torvalds/linux/blob/master/arch/x86/include/asm/pgalloc.h) and populates the page middle directory (`pmd`) provided as an argument with the given page table entries (`bm_pte`):
@ -462,7 +462,7 @@ flags, so we call `set_pte` function to set the page table entry which works in
__flush_tlb_one(addr);
```
This function is defined in [arch/x86/include/asm/tlbflush.h](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973) and calls `__flush_tlb_single` or `__flush_tlb` depending on the value of `cpu_has_invlpg`:
This function is defined in [arch/x86/include/asm/tlbflush.h](https://github.com/torvalds/linux) and calls `__flush_tlb_single` or `__flush_tlb` depending on the value of `cpu_has_invlpg`:
```C
static inline void __flush_tlb_one(unsigned long addr)
in the [arch/x86/um/Kconfig](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/um/Kconfig) kernel configuration file. In this case, implementation of the `__init_rwsem` function will be located in the [kernel/locking/rwsem-xadd.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/locking/rwsem-xadd.c) source code file for us. Let's take a look at this function:
in the [arch/x86/um/Kconfig](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/um/Kconfig) kernel configuration file. In this case, implementation of the `__init_rwsem` function will be located in the [kernel/locking/rwsem.c](https://github.com/torvalds/linux/blob/master/kernel/locking/rwsem.c) source code file for us. Let's take a look at this function:
@ -249,7 +249,7 @@ As for other synchronization primitives which we saw in this chapter, usually `l
#define RWSEM_ACTIVE_BIAS 0x00000001L
```
or `0xffffffff00000001` to the `count` of the given `reader/writer semaphore` and returns previous value of it. After this we check the active mask in the `rw_semaphore->count`. If it was zero before, this means that there were no-one writer before, so we acquired a lock. In other way we call the `call_rwsem_down_write_failed` function from the [arch/x86/lib/rwsem.S](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/lib/rwsem.S) assembly file. The `call_rwsem_down_write_failed` function just calls the `rwsem_down_write_failed` function from the [kernel/locking/rwsem-xadd.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/locking/rwsem-xadd.c) source code file anticipatorily save general purpose registers:
or `0xffffffff00000001` to the `count` of the given `reader/writer semaphore` and returns previous value of it. After this we check the active mask in the `rw_semaphore->count`. If it was zero before, this means that there were no-one writer before, so we acquired a lock. In other way we call the `call_rwsem_down_write_failed` function from the [arch/x86/lib/rwsem.S](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/lib/rwsem.S) assembly file. The `call_rwsem_down_write_failed` function just calls the `rwsem_down_write_failed` function from the [kernel/locking/rwsem-xadd.c](https://github.com/torvalds/linux/blob/master/kernel/locking/rwsem.c) source code file anticipatorily save general purpose registers:
@ -126,7 +126,7 @@ SYSCALL invokes an OS system-call handler at privilege level 0.
It does so by loading RIP from the IA32_LSTAR MSR
```
it means that we need to put the system call entry in to the `IA32_LSTAR` [model specific register](https://en.wikipedia.org/wiki/Model-specific_register). This operation takes place during the Linux kernel initialization process. If you have read the fourth [part](https://0xax.gitbook.io/linux-insides/summary/interrupts/linux-interrupts-4) of the chapter that describes interrupts and interrupt handling in the Linux kernel, you know that the Linux kernel calls the `trap_init` function during the initialization process. This function is defined in the [arch/x86/kernel/setup.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/kernel/setup.c) source code file and executes the initialization of the `non-early` exception handlers like divide error, [coprocessor](https://en.wikipedia.org/wiki/Coprocessor) error etc. Besides the initialization of the `non-early` exceptions handlers, this function calls the `cpu_init` function from the [arch/x86/kernel/cpu/common.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/blob/arch/x86/kernel/cpu/common.c) source code file which besides initialization of `per-cpu` state, calls the `syscall_init` function from the same source code file.
it means that we need to put the system call entry in to the `IA32_LSTAR` [model specific register](https://en.wikipedia.org/wiki/Model-specific_register). This operation takes place during the Linux kernel initialization process. If you have read the fourth [part](https://0xax.gitbook.io/linux-insides/summary/interrupts/linux-interrupts-4) of the chapter that describes interrupts and interrupt handling in the Linux kernel, you know that the Linux kernel calls the `trap_init` function during the initialization process. This function is defined in the [arch/x86/kernel/setup.c](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/setup.c) source code file and executes the initialization of the `non-early` exception handlers like divide error, [coprocessor](https://en.wikipedia.org/wiki/Coprocessor) error etc. Besides the initialization of the `non-early` exceptions handlers, this function calls the `cpu_init` function from the [arch/x86/kernel/cpu/common.c](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/cpu/common.c) source code file which besides initialization of `per-cpu` state, calls the `syscall_init` function from the same source code file.
This function performs the initialization of the system call entry point. Let's look on the implementation of this function. It does not take parameters and first of all it fills two model specific registers:
After this, these system calls will be executed in userspace and this means that there will not be [context switching](https://en.wikipedia.org/wiki/Context_switch). Mapping of the `vsyscall` page occurs in the `map_vsyscall` function that is defined in the [arch/x86/entry/vsyscall/vsyscall_64.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/entry/vsyscall/vsyscall_64.c) source code file. This function is called during the Linux kernel initialization in the `setup_arch` function that is defined in the [arch/x86/kernel/setup.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/kernel/setup.c) source code file (we saw this function in the fifth [part](https://0xax.gitbook.io/linux-insides/summary/initialization/linux-initialization-5) of the Linux kernel initialization process chapter).
After this, these system calls will be executed in userspace and this means that there will not be [context switching](https://en.wikipedia.org/wiki/Context_switch). Mapping of the `vsyscall` page occurs in the `map_vsyscall` function that is defined in the [arch/x86/entry/vsyscall/vsyscall_64.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/entry/vsyscall/vsyscall_64.c) source code file. This function is called during the Linux kernel initialization in the `setup_arch` function that is defined in the [arch/x86/kernel/setup.c](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/setup.c) source code file (we saw this function in the fifth [part](https://0xax.gitbook.io/linux-insides/summary/initialization/linux-initialization-5) of the Linux kernel initialization process chapter).
Note that implementation of the `map_vsyscall` function depends on the `CONFIG_X86_VSYSCALL_EMULATION` kernel configuration option:
We need to call this function to eliminate potential leak of the execve'd binary's [file descriptor](https://en.wikipedia.org/wiki/File_descriptor). In the next step we start preparation of the `bprm` that represented by the `struct linux_binprm` structure (defined in the [include/linux/binfmts.h](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/linux/binfmts.h) header file). The `linux_binprm` structure is used to hold the arguments that are used when loading binaries. For example it contains `vma` field which has `vm_area_struct` type and represents single memory area over a contiguous interval in a given address space where our application will be loaded, `mm` field which is memory descriptor of the binary, pointer to the top of memory and many other different fields.
We need to call this function to eliminate potential leak of the execve'd binary's [file descriptor](https://en.wikipedia.org/wiki/File_descriptor). In the next step we start preparation of the `bprm` that represented by the `struct linux_binprm` structure (defined in the [include/linux/binfmts.h](https://github.com/torvalds/linux/blob/master/include/linux/binfmts.h) header file). The `linux_binprm` structure is used to hold the arguments that are used when loading binaries. For example it contains `vma` field which has `vm_area_struct` type and represents single memory area over a contiguous interval in a given address space where our application will be loaded, `mm` field which is memory descriptor of the binary, pointer to the top of memory and many other different fields.
First of all we allocate memory for this structure with the `kzalloc` function and check the result of the allocation:
@ -199,7 +199,7 @@ if (retval)
goto out_unmark;
```
The `bprm_mm_init` defined in the same source code file and as we can understand from the function's name, it makes initialization of the memory descriptor or in other words the `bprm_mm_init` function initializes `mm_struct` structure. This structure defined in the [include/linux/mm_types.h](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/include/mm_types.h) header file and represents address space of a process. We will not consider implementation of the `bprm_mm_init` function because we do not know many important stuff related to the Linux kernel memory manager, but we just need to know that this function initializes `mm_struct` and populate it with a temporary stack `vm_area_struct`.
The `bprm_mm_init` defined in the same source code file and as we can understand from the function's name, it makes initialization of the memory descriptor or in other words the `bprm_mm_init` function initializes `mm_struct` structure. This structure defined in the [include/linux/mm_types.h](https://github.com/torvalds/linux/blob/master/include/linux/mm_types.h) header file and represents address space of a process. We will not consider implementation of the `bprm_mm_init` function because we do not know many important stuff related to the Linux kernel memory manager, but we just need to know that this function initializes `mm_struct` and populate it with a temporary stack `vm_area_struct`.
After this we calculate the count of the command line arguments which are were passed to the our executable binary, the count of the environment variables and set it to the `bprm->argc` and `bprm->envc` respectively:
We assign `jiffies + 10*HZ` value to the `timeout` variable here. As I think you already understood, this means a ten seconds timeout. After this we are entering a loop where we use the `time_before` macro to compare the current `jiffies` value and our timeout.
Or for example if we look into the [sound/isa/sscape.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/sound/isa/sscape) source code file which represents the driver for the [Ensoniq Soundscape Elite](https://en.wikipedia.org/wiki/Ensoniq_Soundscape_Elite) sound card, we will see the `obp_startup_ack` function that waits upto a given timeout for the On-Board Processor to return its start-up acknowledgement sequence:
Or for example if we look into the [sound/isa/sscape.c](https://github.com/torvalds/linux/blob/master/sound/isa/sscape.c) source code file which represents the driver for the [Ensoniq Soundscape Elite](https://en.wikipedia.org/wiki/Ensoniq_Soundscape_Elite) sound card, we will see the `obp_startup_ack` function that waits upto a given timeout for the On-Board Processor to return its start-up acknowledgement sequence:
```C
static int obp_startup_ack(struct soundscape *s, unsigned timeout)
@ -70,7 +70,7 @@ By default, there is the `CONFIG_HZ_PERIODIC` kernel configuration option which
The first is to omit scheduling-clock ticks on idle processors. To enable this behaviour in the Linux kernel, we need to enable the `CONFIG_NO_HZ_IDLE` kernel configuration option. This option allows Linux kernel to avoid sending timer interrupts to idle processors. In this case periodic timer interrupts will be replaced with on-demand interrupts. This mode is called - `dyntick-idle` mode. But if the kernel does not handle interrupts of a system timer, how can the kernel decide if the system has nothing to do?
Whenever the idle task is selected to run, the periodic tick is disabled with the call of the `tick_nohz_idle_enter` function that defined in the [kernel/time/tick-sched.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/kernel/time/tich-sched.c) source code file and enabled with the call of the `tick_nohz_idle_exit` function. There is special concept in the Linux kernel which is called - `clock event devices` that are used to schedule the next interrupt. This concept provides API for devices which can deliver interrupts at a specific time in the future and represented by the `clock_event_device` structure in the Linux kernel. We will not dive into implementation of the `clock_event_device` structure now. We will see it in the next part of this chapter. But there is one interesting moment for us right now.
Whenever the idle task is selected to run, the periodic tick is disabled with the call of the `tick_nohz_idle_enter` function that defined in the [kernel/time/tick-sched.c](https://github.com/torvalds/linux/blob/master/kernel/time/tick-sched.c) source code file and enabled with the call of the `tick_nohz_idle_exit` function. There is special concept in the Linux kernel which is called - `clock event devices` that are used to schedule the next interrupt. This concept provides API for devices which can deliver interrupts at a specific time in the future and represented by the `clock_event_device` structure in the Linux kernel. We will not dive into implementation of the `clock_event_device` structure now. We will see it in the next part of this chapter. But there is one interesting moment for us right now.
The second way is to omit scheduling-clock ticks on processors that are either in `idle` state or that have only one runnable task or in other words busy processor. We can enable this feature with the `CONFIG_NO_HZ_FULL` kernel configuration option and it allows to reduce the number of timer interrupts significantly.
@ -168,7 +168,7 @@ enum tick_device_mode {
};
```
Each `clock events` device in the system registers itself by the call of the `clockevents_register_device` function or `clockevents_config_and_register` function during initialization process of the Linux kernel. During the registration of a new `clock events` device, the Linux kernel calls the `tick_check_new_device` function that defined in the [kernel/time/tick-common.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/kernel/tick-common.c) source code file and checks the given `clock events` device should be used by the Linux kernel. After all checks, the `tick_check_new_device` function executes a call of the:
Each `clock events` device in the system registers itself by the call of the `clockevents_register_device` function or `clockevents_config_and_register` function during initialization process of the Linux kernel. During the registration of a new `clock events` device, the Linux kernel calls the `tick_check_new_device` function that defined in the [kernel/time/tick-common.c](https://github.com/torvalds/linux/blob/master/kernel/time/tick-common.c) source code file and checks the given `clock events` device should be used by the Linux kernel. After all checks, the `tick_check_new_device` function executes a call of the:
First of all we get the current `clock event` device from the `tick_broadcast_device`. The `tick_broadcast_device` defined in the [kernel/time/tick-common.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/kernel/tick-common.c) source code file:
First of all we get the current `clock event` device from the `tick_broadcast_device`. The `tick_broadcast_device` defined in the [kernel/time/tick-common.c](https://github.com/torvalds/linux/blob/master/kernel/time/tick-common.c) source code file:
```C
static struct tick_device tick_broadcast_device;
@ -321,7 +321,7 @@ If you remember, we have started this part with the call of the `tick_init` func
We already saw some information about `dyntick` concept in this part and we know that this concept allows kernel to disable system timer interrupts in the `idle` state. The `tick_nohz_init` function makes initialization of the different data structures which are related to this concept. This function defined in the [kernel/time/tick-sched.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/kernel/time/tich-sched.c) source code file and starts from the check of the value of the `tick_nohz_full_running` variable which represents state of the tick-less mode for the `idle` state and the state when system timer interrups are disabled during a processor has only one runnable task:
We already saw some information about `dyntick` concept in this part and we know that this concept allows kernel to disable system timer interrupts in the `idle` state. The `tick_nohz_init` function makes initialization of the different data structures which are related to this concept. This function defined in the [kernel/time/tick-sched.c](https://github.com/torvalds/linux/blob/master/kernel/time/tick-sched.c) source code file and starts from the check of the value of the `tick_nohz_full_running` variable which represents state of the tick-less mode for the `idle` state and the state when system timer interrups are disabled during a processor has only one runnable task:
The seconds clock source is [ACPI Power Management Timer](http://uefi.org/sites/default/files/resources/ACPI_5.pdf). Implementation of this clock source is located in the [drivers/clocksource/acpi_pm.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/drivers/clocksource_acpi_pm.c) source code file and starts from the call of the `init_acpi_pm_clocksource` function during `fs` [initcall](https://kernelnewbies.org/Documents/InitcallMechanism).
The seconds clock source is [ACPI Power Management Timer](http://uefi.org/sites/default/files/resources/ACPI_5.pdf). Implementation of this clock source is located in the [drivers/clocksource/acpi_pm.c](https://github.com/torvalds/linux/blob/master/drivers/clocksource/acpi_pm.c) source code file and starts from the call of the `init_acpi_pm_clocksource` function during `fs` [initcall](https://kernelnewbies.org/Documents/InitcallMechanism).
If we will look at implementation of the `init_acpi_pm_clocksource` function, we will see that it starts from the check of the value of `pmtmr_ioport` variable:
0xAX
4 years ago
committed by
GitHub