Memory management is one of the most complex (and I think that it is the most complex) parts of the operating system kernel. In the [last preparations before the kernel entry point](http://0xax.gitbooks.io/linux-insides/content/Initialization/linux-initialization-3.html) part we stopped right before call of the `start_kernel` function. This function initializes all the kernel features (including architecture-dependent features) before the kernel runs the first `init` process. You may remember as we built early page tables, identity page tables and fixmap page tables in the boot time. No complicated memory management is working yet. When the `start_kernel` function is called we will see the transition to more complex data structures and techniques for memory management. For a good understanding of the initialization process in the linux kernel we need to have a clear understanding of these techniques. This chapter will provide an overview of the different parts of the linux kernel memory management framework and its API, starting from the `memblock`.
Memblock is one of the methods of managing memory regions during the early bootstrap period while the usual kernel memory allocators are not up and
running yet. Previously it was called `Logical Memory Block`, but with the [patch](https://lkml.org/lkml/2010/7/13/68) by Yinghai Lu, it was renamed to the `memblock`. As Linux kernel for `x86_64` architecture uses this method. We already met `memblock` in the [Last preparations before the kernel entry point](http://0xax.gitbooks.io/linux-insides/content/Initialization/linux-initialization-3.html) part. And now time to get acquainted with it closer. We will see how it is implemented.
We will start to learn `memblock` from the data structures. Definitions of the all data structures can be found in the [include/linux/memblock.h](https://github.com/torvalds/linux/blob/master/include/linux/memblock.h) header file.
This structure contains five fields. First is `bottom_up` which allows allocating memory in bottom-up mode when it is `true`. Next field is `current_limit`. This field describes the limit size of the memory block. The next three fields describe the type of the memory block. It can be: reserved, memory and physical memory if the `CONFIG_HAVE_MEMBLOCK_PHYS_MAP` configuration option is enabled. Now we see yet another data structure - `memblock_type`. Let's look at its definition:
This structure provides information about memory type. It contains fields which describe the number of memory regions which are inside the current memory block, the size of all memory regions, the size of the allocated array of the memory regions and pointer to the array of the `memblock_region` structures. `memblock_region` is a structure which describes a memory region. Its definition is:
Also `memblock_region` provides integer field - [numa](http://en.wikipedia.org/wiki/Non-uniform_memory_access) node selector, if the `CONFIG_HAVE_MEMBLOCK_NODE_MAP` configuration option is enabled.
These three structures: `memblock`, `memblock_type` and `memblock_region` are main in the `Memblock`. Now we know about it and can look at Memblock initialization process.
As all API of the `memblock` described in the [include/linux/memblock.h](https://github.com/torvalds/linux/blob/master/include/linux/memblock.h) header file, all implementation of these function is in the [mm/memblock.c](https://github.com/torvalds/linux/blob/master/mm/memblock.c) source code file. Let's look at the top of the source code file and we will see the initialization of the `memblock` structure:
Here we can see initialization of the `memblock` structure which has the same name as structure - `memblock`. First of all note on `__initdata_memblock`. Defenition of this macro looks like:
```C
#ifdef CONFIG_ARCH_DISCARD_MEMBLOCK
#define __init_memblock __meminit
#define __initdata_memblock __meminitdata
#else
#define __init_memblock
#define __initdata_memblock
#endif
```
You can note that it depends on `CONFIG_ARCH_DISCARD_MEMBLOCK`. If this configuration option is enabled, memblock code will be put to the `.init` section and it will be released after the kernel is booted up.
Next we can see initialization of the `memblock_type memory`, `memblock_type reserved` and `memblock_type physmem` fields of the `memblock` structure. Here we are interested only in the `memblock_type.regions` initialization process. Note that every `memblock_type` field initialized by the arrays of the `memblock_region`:
Every array contains 128 memory regions. We can see it in the `INIT_MEMBLOCK_REGIONS` macro definition:
```C
#define INIT_MEMBLOCK_REGIONS 128
```
Note that all arrays are also defined with the `__initdata_memblock` macro which we already saw in the `memblock` strucutre initialization (read above if you've forgot).
The last two fields describe that `bottom_up` allocation is disabled and the limit of the current Memblock is:
```C
#define MEMBLOCK_ALLOC_ANYWHERE (~(phys_addr_t)0)
```
which is `0xffffffffffffffff`.
On this step initialization of the `memblock` structure finished and we can look on the Memblock API.
Ok we have finished with initilization of the `memblock` structure and now we can look on the Memblock API and its implementation. As I said above, all implementation of the `memblock` presented in the [mm/memblock.c](https://github.com/torvalds/linux/blob/master/mm/memblock.c). To understand how `memblock` works and is implemented, let's look at its usage first of all. There are a couple of [places](http://lxr.free-electrons.com/ident?i=memblock) in the linux kernel where memblock is used. For example let's take `memblock_x86_fill` function from the [arch/x86/kernel/e820.c](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/e820.c#L1061). This function goes through the memory map provided by the [e820](http://en.wikipedia.org/wiki/E820) and adds memory regions reserved by the kernel to the `memblock` with the `memblock_add` function. As we met `memblock_add` function first, let's start from it.
This function takes physical base address and size of the memory region and adds it to the `memblock`. `memblock_add` function does not do anything special in its body, but just calls:
function. We pass memory block type - `memory`, physical base address and size of the memory region, maximum number of nodes which are zero if `CONFIG_NODES_SHIFT` is not set in the configuration file or `CONFIG_NODES_SHIFT` if it is set, and flags. The `memblock_add_range` function adds new memory region to the memory block. It starts by checking the size of the given region and if it is zero it just returns. After this, `memblock_add_range` checks for existence of the memory regions in the `memblock` structure with the given `memblock_type`. If there are no memory regions, we just fill new `memory_region` with the given values and return (we already saw the implementation of this in the [First touch of the linux kernel memory manager framework](http://0xax.gitbooks.io/linux-insides/content/Initialization/linux-initialization-3.html)). If `memblock_type` is not empty, we start to add new memory region to the `memblock` with the given `memblock_type`.
After that we have the end address of the new memory region, `memblock_add_range` checks overlap and merge conditions with already added memory regions. Insertion of the new memory region to the `memblcok` consists of two steps:
If the new memory region does not overlap regions which are already stored in the `memblock`, insert this region into the memblock with and this is first step, we check that new region can fit into the memory block and call `memblock_double_array` in other way:
`memblock_double_array` doubles the size of the given regions array. Then we set `insert` to `true` and go to the `repeat` label. In the second step, starting from the `repeat` label we go through the same loop and insert the current memory region into the memory block with the `memblock_insert_region` function:
As we set `insert` to `true` in the first step, now `memblock_insert_region` will be called. `memblock_insert_region` has almost the same implementation that we saw when we insert new region to the empty `memblock_type` (see above). This function gets the last memory region:
After this fills `memblock_region` fields of the new memory region base, size and etc... and increase size of the `memblock_type`. In the end of the execution, `memblock_add_range` calls `memblock_merge_regions` which merges neighboring compatible regions in the second step.
In this case we insert `overlapping portion` (we insert only the higher portion, because the lower portion is already in the overlapped memory region), then the remaining portion and merge these portions with `memblock_merge_regions`. As I said above `memblock_merge_regions` function merges neighboring compatible regions. It goes through the all memory regions from the given `memblock_type`, takes two neighboring memory regions - `type->regions[i]` and `type->regions[i + 1]` and checks that these regions have the same flags, belong to the same node and that end address of the first regions is not equal to the base address of the second region:
As we update the size of the first memory region with the size of the next memory region, we copy every (in the loop) memory region which is after the current (`this`) memory region to the one index ago with the `memmove` function:
That's all. This is the whole principle of the work of the `memblock_add_range` function.
There is also `memblock_reserve` function which does the same as `memblock_add`, but only with one difference. It stores `memblock_type.reserved` in the memblock instead of `memblock_type.memory`.
First of all this function checks that `memblock` contains reserved memory regions. If `memblock` does not contain reserved memory regions we just return zero. Otherwise we write the physical address of the reserved memory regions array to the given address and return aligned size of the allocated array. Note that there is `PAGE_ALIGN` macro used for align. Actually it depends on size of page:
Implementation of the `get_allocated_memblock_memory_regions_info` function is the same. It has only one difference, `memblock_type.memory` used instead of `memblock_type.reserved`.
There are many calls to `memblock_dbg` in the memblock implementation. If you pass the `memblock=debug` option to the kernel command line, this function will be called. Actually `memblock_dbg` is just a macro which expands to `printk`:
This is the end of the first part about linux kernel memory management. If you have questions or suggestions, ping me on twitter [0xAX](https://twitter.com/0xAX), drop me an [email](anotherworldofworld@gmail.com) or just create an [issue](https://github.com/0xAX/linux-insides/issues/new).
**Please note that English is not my first language and I am really sorry for any inconvenience. If you found any mistakes please send me a PR to [linux-insides](https://github.com/0xAX/linux-insides).**
