ktweak/ktweak

#!/usr/bin/env bash
# Written by Draco (tytydraco @ GitHub)

# Log in red and exit
err() {
	echo -e "\e[91m[!] $@\e[39m"
}

# Log in white and continue (unnecessary)
dbg() {
	echo -e "[*] $@"
}

# Safely write value to file
_write() {
	# Bail out if file does not exist
	if [[ ! -f "$1" ]]
	then
		err "File $1 does not exist. Skipping."
		return 1
	fi

	# Fetch the current key value
	local curval=`cat "$1" 2> /dev/null`

	# Bail out if value is already set
	if [[ "$curval" == "$2" ]]
	then
		dbg "File $1 is already set to $2. Skipping."
		return 0
	fi

	# Write the new value
	echo "$2" > "$1" 2> /dev/null

	# Bail out if write fails
	if [[ $? -ne 0 ]]
	then
		err "Failed to write $2 to $1. Skipping."
		return 1
	fi

	dbg "Wrote $1: $curval --> $2"
}

# Background fork write function
write() {
	if [[ "$SYNC" -eq 1 ]]
	then
		_write "$@"
	else
		_write "$@" &
	fi
}

# Setup ZRAM to half of the available RAM (sync)
setup_zram() {
	memsize=`cat /proc/meminfo | grep "MemTotal" | awk '{print $2}'`
	halfmemsize=`echo "$(($memsize/2))"`

	swapoff /dev/block/zram0
	_write /sys/block/zram0/reset 1
	_write /sys/block/zram0/disksize "${halfmemsize}KB"

	avail_algs=`cat /sys/block/zram0/comp_algorithm`
	for alg in lz4 zstd lzo deflate
	do
		if [[ "$avail_algs" == *"$alg"* ]]
		then
			_write "${queue}scheduler" "$alg"
			break
		fi
	
	done

	mkswap /dev/block/zram0
	swapon /dev/block/zram0
}

usage() {
	echo -n "Usage: `basename $0` [OPTIONS]
Options:
  -s			Synchronous mode
  -h			Show usage
"
}

# Check for root permissions
if [[ `id -u` -ne 0 ]]
then
	err "No root permissions. Exiting."
	exit 1
fi

while getopts ":sh" opt; do
	case $opt in
		s)
			SYNC=1
			;;
		h)
			usage
			exit 0
			;;
		*)
			usage
			exit 1
			;;
	esac
done
shift $((OPTIND-1))

# Print device information prior to execution

# Kernel and device information
dbg `uname -a`

# Scheduler feature check
[[ -f "/sys/kernel/debug/sched_features" ]] && dbg "Scheduler features exposed."

# CPU boost check
[[ -d "/sys/module/cpu_boost" ]] && dbg "CAF CPU boost detected."

# ZRAM support state
[[ -d "/sys/block/zram0" ]] && dbg "ZRAM supported."

# Kernel
write /proc/sys/kernel/perf_cpu_time_max_percent 5
write /proc/sys/kernel/sched_autogroup_enabled 1
write /proc/sys/kernel/sched_enable_thread_grouping 1
write /proc/sys/kernel/sched_child_runs_first 1
write /proc/sys/kernel/sched_tunable_scaling 0
write /proc/sys/kernel/sched_latency_ns 5000000
write /proc/sys/kernel/sched_min_granularity_ns 500000
write /proc/sys/kernel/sched_wakeup_granularity_ns 1000000
write /proc/sys/kernel/sched_migration_cost_ns 1000000
write /proc/sys/kernel/sched_min_task_util_for_colocation 0
write /proc/sys/kernel/sched_nr_migrate 16
write /proc/sys/kernel/sched_schedstats 0

# VM
write /proc/sys/vm/dirty_background_ratio 10
write /proc/sys/vm/dirty_ratio 30
write /proc/sys/vm/dirty_expire_centisecs 1000
write /proc/sys/vm/dirty_writeback_centisecs 1000
write /proc/sys/vm/page-cluster 0
write /proc/sys/vm/reap_mem_on_sigkill 1
write /proc/sys/vm/stat_interval 10
write /proc/sys/vm/swappiness 100
write /proc/sys/vm/vfs_cache_pressure 60

# Scheduler features
if [[ -f "/sys/kernel/debug/sched_features" ]]
then
	write /sys/kernel/debug/sched_features NEXT_BUDDY
	write /sys/kernel/debug/sched_features TTWU_QUEUE
fi

# CPU
for cpu in /sys/devices/system/cpu/cpu*/cpufreq/
do
	avail_govs=`cat "${cpu}scaling_available_governors"`
	if [[ "$avail_govs" == *"schedutil"* ]]
	then
		_write "${cpu}scaling_governor" schedutil
		write "${cpu}schedutil/up_rate_limit_us" 10000
		write "${cpu}schedutil/down_rate_limit_us" 10000
		write "${cpu}schedutil/rate_limit_us" 10000
		write "${cpu}schedutil/hispeed_load" 80 
		write "${cpu}schedutil/hispeed_freq" `cat "${cpu}cpuinfo_max_freq"`
	elif [[ "$avail_govs" == *"interactive"* ]]
	then
		_write "${cpu}scaling_governor" interactive
		write "${cpu}interactive/min_sample_time" 10000
		write "${cpu}interactive/go_hispeed_load" 80
		write "${cpu}interactive/hispeed_freq" `cat "${cpu}cpuinfo_max_freq"`
	fi
done

# I/O
for queue in /sys/block/*/queue/
do
	avail_scheds=`cat "${queue}scheduler"`
	for sched in cfq noop kyber bfq mq-deadline none
	do
		if [[ "$avail_scheds" == *"$sched"* ]]
		then
			_write "${queue}scheduler" "$sched"
			break
		fi
	done
	write "${queue}iostats" 0
	write "${queue}read_ahead_kb" 64
	write "${queue}nr_requests" 64
done

# ZRAM
[[ -d "/sys/block/zram0" ]] && setup_zram &> /dev/null &

exit 0