koreader/frontend/device/cervantes/powerd.lua

local BasePowerD = require("device/generic/powerd")
local SysfsLight = require ("device/sysfs_light")
local PluginShare = require("pluginshare")

local battery_sysfs = "/sys/devices/platform/pmic_battery.1/power_supply/mc13892_bat/"

local CervantesPowerD = BasePowerD:new{
    fl = nil,
    fl_warmth = nil,
    auto_warmth = false,
    max_warmth_hour = 23,

    fl_min = 0,
    fl_max = 100,
    fl_warmth_min = 0,
    fl_warmth_max = 100,
    capacity_file = battery_sysfs .. 'capacity',
    status_file = battery_sysfs .. 'status'
}

function CervantesPowerD:_syncLightOnStart()
    -- We can't read value from the OS or hardware.
    -- Use last values stored in koreader settings.
    local new_intensity = G_reader_settings:readSetting("frontlight_intensity") or nil
    local is_frontlight_on = G_reader_settings:readSetting("is_frontlight_on") or nil
    local new_warmth, auto_warmth = nil

    if self.fl_warmth ~= nil then
        new_warmth = G_reader_settings:readSetting("frontlight_warmth") or nil
        auto_warmth = G_reader_settings:readSetting("frontlight_auto_warmth") or nil
    end

    if new_intensity ~= nil then
        self.hw_intensity = new_intensity
    end

    if is_frontlight_on ~= nil then
        self.initial_is_fl_on = is_frontlight_on
    end

    local max_warmth_hour =
        G_reader_settings:readSetting("frontlight_max_warmth_hour")
    if max_warmth_hour then
        self.max_warmth_hour = max_warmth_hour
    end
    if auto_warmth then
        self.auto_warmth = true
        self:calculateAutoWarmth()
    elseif new_warmth ~= nil then
        self.fl_warmth = new_warmth
    end

    if self.initial_is_fl_on == false and self.hw_intensity == 0 then
        self.hw_intensity = 1
    end
end

function CervantesPowerD:init()
    -- Default values in case self:_syncLightOnStart() does not find
    -- any previously saved setting (and for unit tests where it will
    -- not be called)
    self.hw_intensity = 20
    self.initial_is_fl_on = true
    self.autowarmth_job_running = false

    if self.device:hasFrontlight() then
        if self.device:hasNaturalLight() then
            local nl_config = G_reader_settings:readSetting("natural_light_config")
            if nl_config then
                for key,val in pairs(nl_config) do
                    self.device.frontlight_settings[key] = val
                end
            end
            -- If this device has a mixer, we can use the ioctl for brightness control, as it's much lower latency.
            if self.device:hasNaturalLightMixer() then
                local kobolight = require("ffi/kobolight")
                local ok, light = pcall(kobolight.open)
                if ok then
                    self.device.frontlight_settings.frontlight_ioctl = light
                end
            end
            self.fl = SysfsLight:new(self.device.frontlight_settings)
            self.fl_warmth = 0
            self:_syncLightOnStart()
        else
            local kobolight = require("ffi/kobolight")
            local ok, light = pcall(kobolight.open)
            if ok then
                self.fl = light
                self:_syncLightOnStart()
            end
        end
    end
end

function CervantesPowerD:saveSettings()
    if self.device:hasFrontlight() then
        -- Store BasePowerD values into settings (and not our hw_intensity, so
        -- that if frontlight was toggled off, we save and restore the previous
        -- untoggled intensity and toggle state at next startup)
        local cur_intensity = self.fl_intensity
        local cur_is_fl_on = self.is_fl_on
        local cur_warmth = self.fl_warmth
        local cur_auto_warmth = self.auto_warmth
        local cur_max_warmth_hour = self.max_warmth_hour
        -- Save intensity to koreader settings
        G_reader_settings:saveSetting("frontlight_intensity", cur_intensity)
        G_reader_settings:saveSetting("is_frontlight_on", cur_is_fl_on)
        if cur_warmth ~= nil then
            G_reader_settings:saveSetting("frontlight_warmth", cur_warmth)
            G_reader_settings:saveSetting("frontlight_auto_warmth", cur_auto_warmth)
            G_reader_settings:saveSetting("frontlight_max_warmth_hour", cur_max_warmth_hour)
        end
    end
end

function CervantesPowerD:frontlightIntensityHW()
    return self.hw_intensity
end

function CervantesPowerD:isFrontlightOnHW()
    if self.initial_is_fl_on ~= nil then -- happens only once after init()
        -- give initial state to BasePowerD, which will
        -- reset our self.hw_intensity to 0 if self.initial_is_fl_on is false
        local ret = self.initial_is_fl_on
        self.initial_is_fl_on = nil
        return ret
    end
    return self.hw_intensity > 0
end

function CervantesPowerD:setIntensityHW(intensity)
    if self.fl == nil then return end
    self.fl:setBrightness(intensity)
    self.hw_intensity = intensity
    -- Now that we have set intensity, we need to let BasePowerD
    -- know about possibly changed frontlight state (if we came
    -- from light toggled off to some intensity > 0).
    self:_decideFrontlightState()
end

function CervantesPowerD:setWarmth(warmth)
    if self.fl == nil then return end
    if not warmth and self.auto_warmth then
        self:calculateAutoWarmth()
    end
    self.fl_warmth = warmth or self.fl_warmth
    self.fl:setWarmth(self.fl_warmth)
    self:stateChanged()
end

function CervantesPowerD:getWarmth()
    if self.fl == nil then return end
    return self.fl_warmth
end

function CervantesPowerD:calculateAutoWarmth()
    local current_time = os.date("%H") + os.date("%M")/60
    local max_hour = self.max_warmth_hour
    local diff_time = max_hour - current_time
    if diff_time < 0 then
        diff_time = diff_time + 24
    end
    if diff_time < 12 then
        -- We are before bedtime. Use a slower progression over 5h.
        self.fl_warmth = math.max(20 * (5 - diff_time), 0)
    elseif diff_time > 22 then
        -- Keep warmth at maximum for two hours after bedtime.
        self.fl_warmth = 100
    else
        -- Between 2-4h after bedtime, return to zero.
        self.fl_warmth = math.max(100 - 50 * (22 - diff_time), 0)
    end
    self.fl_warmth = math.floor(self.fl_warmth + 0.5)

    -- Enable background job for setting Warmth, if not already done.
    if not self.autowarmth_job_running then
        table.insert(PluginShare.backgroundJobs, {
                         when = 180,
                         repeated = true,
                         executable = function()
                             if self.auto_warmth then
                                 self:setWarmth()
                             end
                         end,
        })
        if package.loaded["ui/uimanager"] ~= nil then
            local Event = require("ui/event")
            local UIManager = require("ui/uimanager")
            UIManager:broadcastEvent(Event:new("BackgroundJobsUpdated"))
        end
        self.autowarmth_job_running = true
    end
end

function CervantesPowerD:getCapacityHW()
    return self:read_int_file(self.capacity_file)
end

function CervantesPowerD:isChargingHW()
    return self:read_str_file(self.status_file) == "Charging"
end

function CervantesPowerD:beforeSuspend()
    if self.fl == nil then return end
    -- just turn off frontlight without remembering its state
    self.fl:setBrightness(0)
end

function CervantesPowerD:afterResume()
    if self.fl == nil then return end
    -- just re-set it to self.hw_intensity that we haven't change on Suspend
    if self.fl_warmth == nil then
        self.fl:setBrightness(self.hw_intensity)
    else
        if self.auto_warmth then
            self:calculateAutoWarmth()
        end
        self.fl:setNaturalBrightness(self.hw_intensity, self.fl_warmth)
    end
end

return CervantesPowerD