In some versions of the /ebrmain/config/extensions.cfg file there is a
comment #ebrcfg. This will not match the regex and crashes koreader as
the table is empty.
Add a check to ensure the table is not empty while reading extensions
from the default file.
This is useful for the sysstat plugin not to have 00:00 for suspend time :)
Something similar should probably be done for the other canSuspend platforms.
* AutoSuspend: Use the canSuspend devcap check instead of reinventing the wheel.
* Device & UIManager: Cleanup canSuspend devcap check related stuff to avoid boilerplate code.
(It also now defaults to no, and is explicitly set by device implementations where supported).
* AutoSuspend: Re-engage suspend/shutdown timers when fully charged.
This restores the existing behavior pre #9036
(c.f., https://github.com/koreader/koreader/pull/9258#issuecomment-1167672356)
* SDL: Unbreak the fake suspend behavior so that it actually works.
Tweak the default screensaver message to remind users that Power is bound to F2.
(Fix#9262)
* AutoSuspend: Re-engage suspend/shutdown timers on unplug.
This matters on Kobo, because the unexpected wakeup guard might have stopped the suspend timer.
Schedule wifi keep-alive on wifi start but do not reschedule when
connection is lost. This will make sure this code is not run when
wifi is disabled again saving some battery and cpu cycles.
Commonize fullscreen code across different devices.
Add fullscreen toggle on SDL desktop targets.
Expose the toggle to the dispatcher and map it to F11.
Hide touchmenu when resizing.
* GestureDetector: Downgrade probeClockSource log messages to debug
We're seeing a bit more of 'em between autostandby and inhibitInput now,
and the whole thing was implemented long enough ago that it's no longer
critical to see this in random non-debug logs ;).
* Input: Reset gesture state in inhibitInput
Should prevent bogus gestures when re-enabling the handlers if we were
called in the middle of gesture detection.
Long story short: the LeaveStandby event is sent via `tickAfterNext`, so if we tear down the plugin right after calling it (in this case, that means that the very input event that wakes the device up from suspend is one that kills ReaderUI or FileManager), what's in UIManager's task queue isn't the actual function, but the anonymous nextTick wrapper constructed by `tickAfterNext` (c.f.,
https://github.com/koreader/koreader/issues/9112#issuecomment-1133999385).
Tweak `UIManager:tickAfterNext` to return a reference to said wrapper, so that we can store it and unschedule that one, too, in `AutoSuspend:onCloseWidget`.
Fix#9112 (many thanks to [@boredhominid](https://github.com/boredhominid) for his help in finding a repro for this ;)).
Re: #8638, as the extra debugging facilities (i.e., ebb81b9845) added during testing might help pinpoint the root issue for that one, too.
Also includes a minor simplification to `UIManager:_checkTasks`, and various other task queue related codepaths (e.g., `WakeupMgr`) ;).
The change from timeval to time completely broke reMarkable.
frontend/device/remarkable/device.lua was using TimeVal:now() to manually overwrite event time values, as noted in the code comments.
Input:handleTouchEv is expecting those event time values to be timevals, not integer times.
So as soon as the user touches the screen, crash.
* Disable all non power management related input during suspend. (This prevents wonky touch events from being tripped when closing a sleep cover on an already-in-suspend device, among other things).
* Kobo: Use our WakeupMgr instance, not the class.
* WakupMgr: split `removeTask` in two:
* `removeTask`, which *only* takes a queue index as input, and only removes a single task. Greatly simplifies the function (i.e., it's just a `table.remove`).
* `removeTasks`, which takes an epoch or a cb ref, and removes *every* task that matches.
* Both of these will also *always* re-schedule the next task (if any) on exit, since we can have multiple WakeupMgr tasks queued, but we can only have a single RTC wake alarm set ;).
* `wakeupAction` now takes a `proximity` argument, which it passes on to its `validateWakeupAlarmByProximity` call, allowing call sites to avoir having to duplicate that call themselves when they want to use a custom proximity window.
* `wakeupAction` now re-schedules the next task (if any) on exit.
* Simplify `Kobo:checkUnexpectedWakeup`, by removing the duplicate `WakerupMgr:validateWakeupAlarmByProximity` call, now that we can pass a proximity window to `WakeuoMgr:wakeupAction`.
* The various network activity timeouts are now halved when autostandby is enabled.
* Autostandby: get rid of the dummy deadline_guard task, as it's no longer necessary since #9009.
* UIManager: The previous change allows us to simplify `getNextTaskTimes` into a simpler `getNextTaskTime` variant, getting rid of a table & a loop.
* ReaderFooter & ReaderHeader: Make sure we only perform a single refresh when exiting standby.
* Kobo: Rewrite sysfs writes to use ANSI C via FFI instead of stdio via Lua, as it obscured some common error cases (e.g., EBUSY on /sys/power/state).
* Kobo: Simplify `suspend`, now that we have sane error handling in sysfs writes.
* Kobo.powerd: Change `isCharging` & `isAuxCharging` behavior to match the behavior of the NTX ioctl (i.e., Charging == Plugged-in). This has the added benefit of making the AutoSuspend checks behave sensibly in the "fully-charged but still plugged in" scenario (because being plugged in is enough to break PM on `!canPowerSaveWhileCharging` devices).
* AutoSuspend: Disable our `AllowStandby` handler when auto standby is disabled, so as to not interfere with other modules using `UIManager:allowStandby` (fix#9038).
* PowerD: Allow platforms to implement `isCharged`, indicating that the battery is full while still plugged in to a power source (battery icon becomes a power plug icon).
* Kobo.powerd: Implement `isCharged`, and kill charging LEDs once battery is full.
* Kindle.powerd: Implement `isCharged` on post-Wario devices. (`isCharging` is still true in that state, as it ought to).
* Make sure AutoStandby cohabitates nicely with AutoSuspend (regression since #8985), specifically:
* Disable standby during suspend.
* Ensure that leaving standby restores the scheduled suspend properly, with the appropriate remaining amount of time based on the last user input.
* Handle devices with an auxiliary battery better when scheduling suspend (assume it's only charging when the aux battery is charging, not the ereader's).
* Tweak debug logging to be able to remote debug corner-cases more easily without requiring code changes.
* Fix erroneous behavior when awoken from standby by something that doesn't trigger an InputEvent Event (e.g., rtc alarm, gyro, or random bullshit).
Specifically, don't forcibly unschedule/schedule on every input event, instead, let the scheduled task figure out if the deadline came to pass or not ;).
c.f., https://github.com/koreader/koreader/pull/8970#issuecomment-1092775830
Besides getting rid of some overhead, this allows proper scheduling after a task that would have blocked for longer than the standby timeout.
* Handle said rotation shenanigans inside ScreenSaver & ScreenSaverWidget, which allows a more targeted approach; and prevents said rotation from affecting other widgets. (Also, gets rid of duplicated code).
* Handle the corner-case or exiting early from a "keep on screen for n sec" screensaver better, by unscheduling the extra refresh, since an early tap took care of that already.
Allows the device to go into standby (if available in `/sys/power/state`) to save power.
Adds an entry in the device menu to tune the timeout for standby.
(Shows total standby- and suspend-time in system statistics.)
* Ignore hardware sleep button
When running KOReader with a launcher, having the power button trigger the Power event conflicts with the launcher's built-in screensaver (see https://github.com/koreader/koreader/issues/8891). This commit ignores the hardware power button in KOReader and lets the launcher handle sleep and wake normally.
* Disable autosuspend
If a launcher is active, there will be no way to un-suspend because the power button is ignored by KOReader and handled by the launcher.
* Ignore power button only if Oxide is running
Same with disabling auto suspend
* Only toggle nightmode via the grayscale fb info flag on Kindle
Most NTX boards require elaborate trickery (see fbdepth) to actually
send a vput ioctl without the driver screwing with the rotation behind
your back.
This was causing spurious hardware rotations on exit on most Kobo
devices, something which might have gone mostly unnoticed, as current
Nickel versions will sanitize it on startup.
A simple repro was instead to start an USBMS session, as that exits
KOReader and restarts it without going through fbdepth again ;).
* Rejig frontlight warmth API to more closely match the existing API, and, hopefully, clarify some of its quirks, and reduce boilerplate and duplicate code in platform implementations.
* Tweak Kindle:setDateTime to prefer using the platform's custom script, as in interacts better with the stock UI. And make the fallbacks handle old busybox versions better.
* Add Kindle PW5 support ;).
* Add warmth support to the Kindle platform.
* Random TextBoxWidget cleanups: make sure we immediately free destroyed instances.
* FrontLightWidget: Refactor to make it slightly less obnoxious to grok and update; i.e., separate layout from update, and properly separate brightness from warmth handling. Move to simpler widgets instead of reinventing the wheel.
* TextBoxWidgets: Implement `setText` to match TextWidget's API, as some callers may be using the two interchangeably (i.e., Button).
* NaturalLightWidget: Make sure we pass a string to InputText
* InputText: Add debug guards to catch bad callers not passing strings ;).
FocusManager: fix round x use y layout
FocusManager: add tab and shift tab focus navigation support
FocusManager: handle Press key by default
FocusManager: make sure selected in instance level
FocusManager: add hold event support
FocusManager: Half move instead of edge move
FocusManager: add keymap override support
FocusManager: refocusWidget will delegate to parent FocusManager
Focusmanager: refocusWidget can execute on next tick
inputtext: can move out of focus on back
inputtext: fix cannot exit for non-touch device
inputtext: fix cannot input text with kindle dx physical keyboard
fontlightwidget: add non-touch support
datetimewidget: add non-touch support
datetimewidget: fix set date failed in kindle DX, fix datetimewidget month range to 1~23 by default
datetimewidget: make hour max value to 23
multiinputdialog: add non-touch support
checkbox: focusable and focus style
virtualkeyboard: no need to press two back to unfocus inputtext
virtualkeyboard: collect FocusManager event key names to let VirtualKeyboard disable them
openwithdialog: add non-touch support
inputdialog: can close via back button
enable all InputDialog and MultiInputDialog can be close by back
keyboardlayoutdialog: non-touch support
readertoc: non touch device can expand/collapse in toc
bookstatuswidget: non touch support
keyvaluepage: non-touch support
calendarview: non-touch support
Function `SetSubtaskInfo` takes only chars as a valid book. Since
filename can be `nil` (not a char) the crash would happen. This
Change avoids the crash by using a char type nil value. See:
`int SetSubtaskInfo(int task, int subtask, const char *name, const char *book);`
Fixes#8053Fixes#8392 too
Fixes#8743 last issue
With the inkview library inverting the screen seems possible but needs some
discussion with the developers of Pocketbook. For now disable HWInvert so
this feature is not broken while we figure out how to change the invert with inkview.
widget
Since we only use a single icon, we have to take a few shortcuts:
* The icon itself is computed based on the average of both batteries.
* The actual value is the sum of both batteries.
* Much like everywhere else, charging means the *aux* battery charging
(i.e., connected to a power source).
Re #8741, which does the same for ReaderHeader.
ElimGarak1
NiLuJe
Stephane Albert
zwim
yparitcher
Martín Fernández
Robert-Jan de Dreu
Martín Fdez
Glen Sawyer
slimpdev
Will
Philip Chan
Robert-Jan de Dreu
Frans de Jonge
Robert-Jan de Dreu