This reverts commit e7e0d2edb6.
Whatever's actually going on with nightmode, this isn't it.
This was independently confirmed to behave as expected,
and the issue that prompted this was *not* fixed by this commit.
* Device: Add a `hasSeamlessWifiToggle` devcap to complement `hasWifiToggle`, to denote platforms where we can toggle WiFi without losing focus, as this has obvious UX impacts, and less obvious technical impacts on some of the NetworkMgr innards...
* Android: Mark as `!hasSeamlessWifiToggle`, as it requires losing focus to the system settings. Moreover, `turnOnWifi` returns *immediately* and we *still* run in the background during that time, for extra spiciness...
* NetworkMgr: Ensure only *one* call to `turnOnWifi` will actually go on when stuff gets re-scheduled by the `beforeWifiAction` framework.
* NetworkMgr: Ensure the `beforeWifiAction` framework will not re-schedule the same thing *ad vitam aeternam* if a previous connection attempt is still ongoing. (i.e., previously, on Android, if you backed out of the system settings, you entered the Benny Hill dimension, as NetworkMgr would keep throwing you back into the system settings ;p). This has a few implications on callbacks requested by subsequent connection attempts, though. Generally, we'll try to honor *explicitly interactive* callbacks, but `beforeWifiAction` stuff will be dropped (only the original cb is preserved). That's what prevents the aforementioned infinite loop, as the `beforeWifiAction` framework was based on the assumption that `turnOnWifi` somewhat guaranteed `isConnected` to be true on return, something which is only actually true on `hasWifiManager` platforms.
* NetworkMgr: In `prompt` mode, the above implies that the prompt will not even be shown for concurrent attempts, as it's otherwise extremely confusing (KOSync on Android being a prime example, as it has a pair of Suspend/Resume handlers, so the initial attempt trips those two because of the focus switch >_<").
* NetworkMgr: Don't attempt to kill wifi when aborting a connection attempt on `!hasSeamlessWifiToggle` (because, again, it'll break UX, and also because it might run at very awkward times (e.g., I managed to go back to KOReader *between* a FM/Reader switch at one point, which promptly caused `UIManager` to exit because there was nothing to show ;p).
* NetworkMgr: Don't drop the connectivity callback when `beforeWifiAction` is set to prompt and the target happens to use a connectivity check in its `turnOnWifi` implementation (e.g., on Kindle).
* Android: Add an `"ignore"` `beforeWifiAction` mode, that'll do nothing but schedule the connectivity check with its callback (with the intent being the system will eventually enable wifi on its own Soon(TM)). If you're already online, the callback will run immediately, obviously. If you followed the early discussions on this PR, this closely matches what happens on `!hasWifiToggle` platforms (as flagging Android that way was one of the possible approaches here).
* NetworkMgr: Bail out early in `goOnlineToRun` if `beforeWifiAction` isn't `"turn_on"`. Prompt cannot work there, and while ignore technically could, it would serve very little purpose given its intended use case.
* KOSync: Neuter the Resume/Suspend handlers early on `CloseDocument`, as this is how focus switches are handled on Android, and if `beforeWifiAction` is `turn_on` and you were offline at the time, we'd trip them because of the swap to system settings to enable wifi.
* KOSync: Allow `auto_sync` to be enabled regardless of the `beforeWifiAction` mode on `!hasSeamlessWifiToggle` platforms. Prompt is still a terrible idea, but given that `goOnlineToRun` now aborts early if the mode is not supported, it's less of a problem.
* Enforce a minimal standby timer for the first standby after a resume.
* On Kobo, sleep a bit before standby.
This aims to alleviate race conditions causing visible refresh glitches on sunxi, especially when using an extremely low standby timer (i.e., below the defaults).
Makes more sense this way.
Re: #10828
Also clarify the UIManager "no dialogs left" message, and drop the
return value, as it's meaningless, we just want to break & return.
As early as turnOnWifi.
Implement it on hasWifiManager platforms, preventing useless
connectivity checks to run when they're obviously never going to work
because you're out of range of your AP.
Also implemented a flag to notify the backend if the connection attempt
was interactive or not.
Right now, interactive is extremely restricted, it basically means the
menu checkmark, or a gesture.
The intent being that for stuff like the beforeWifiAction framework, we
don't want the backend to spawn extra UI.
Specifically, for hasWifiManager platforms, we no longer spawn the AP
scan list on failure unless the caller was interactive.
TL;DR: beforeWifiAction is now much less obnoxious when you're obviously
not able to connect.
This is semantically more correct, and should prevent platform-specific
weirdness if an ordering concern ever comes up (e.g., like it did for
the viewport stuff).
Re #10743
Note that this only makes faulty switches slightly less annoying: for a
stuck switch, instead of a string of page turns, you'll get a single
missed page turn on the tap that actually releases the stuck contact...
we use it as text anyway and test if it is the empty string also.
this fixes a crash in viewhtml when holding a selector with an empty clipboard, we try to contcate getClipboardText which is nil (on !SDL & !Android)
* Notification: Drop the fencing from #10083; it never actually helped, and had subtle side-effects we could do without.
* VirtualKeyBoard: Flash on close, otherwise, some of the fast refresh glitches may be burned into the working buffer until a flash. Making sure we flash ourselves prevent it from sticking around on the page ;).
* util: Move `writeToSysfs` to base (i.e., `ffi/util`), as we need it there (and it actually makes more sense there anyway ;p).
* Bump base for https://github.com/koreader/koreader-base/pull/1645, which is where the actual workaround (hopefully) lives.
Re #8414, #9806, #10558
It's been made redundant by the RPATH changes
The only platform that gets the dubious honor of actually needing an
LD_LIBRARY_PATH is PocketBook, because of InkView.
Co-authored-by: Benoit Pierre <benoit.pierre@gmail.com>
Bump base to pull in the aforementioned RPATH changes ;).
https://github.com/koreader/koreader-base/pull/1638
* Enable before_wifi_action & after_wifi_action on hasWifiToggle platforms (which is basically all of 'em except naked SDL).
* Decouple restoreWifiAsync from hasWifiManger, because we can do that on other platforms (namely, Kindle. Probably PB, too, but WiFi is already a mess there, and I can't test it).
* Implement restoreWifiAsync on Kindle.
* Properly flag rM as hasWifiManager & hasFastWifiStatusQuery, because it is actually both of those (it uses our wpa_supplicant backend).
* Update the KOSync checks to take these changes into account, to properly disable auto_sync if necessary.
* Really made the Network* event signaling consistent. For realz this time.
* In an effort to make the whole beforeWifiAction framework somewhat usable there, we now assume connectivity is always available on !hasWifiToggle platforms...
Namely, that swipes report the gesture's *starting* coordinates as `pos` (for hit-detection purposes), while pans (and basically everything else) use the *lift* coordinates (as well as provide a relative vector).
In each case, we now also provide a separate `start_pos`/`end_pos`, in case handlers need finer-grained data (e.g., anchoring UI elements to a swipe's lift coordinates).
Extended addition of PocketBook InkPad 4 with firmware later U743g.6.8.885 (PB743G) because its device ID was corrected from PB743g to PB743G by firmware U743g.6.8.1719.
Fix: #10539, and for context #6489, #6733, #6534
Reorganize and reword most of the settings to make it clear what actually ties into auto sync, and what doesn't. (Specifically, what happens when a pull attempts to sync forward or backward has nothing to do with auto sync, it applies in all cases; while the periodic sync *does* require auto sync).
The main point of contention, though, is that auto sync will now *always* attempt to setup network connectivity (i.e., on resume/suspend/close). Periodic sync will *not* though (the intent being that, if you use periodic sync, you're relying on the activity check to actually keep wifi on at all times)).
Since this may lead to a large amount of nagging about wifi toggles on devices w/ NetworkManager support, it is now *disabled* by default on those devices. (And given that it wouldn't have worked because of the lack of connectivity, that doesn't really make any practical difference ;p).
Additionally, given the fact that there's no way to make this behavior viable if the "before wifi" action is left at its default of "prompt", this feature now *requires* that to be set to "turn_on" (on devices where it can, of course); attempting to toggle it on will warn about that if necessary.
This change is retroactive (OTM).
Includes an assortment of fixes and cleanups, including migrating to the new LuaSettings API, which is why there's no longer a smattering of superfluous flushes.
Fix#10588
Regression since #10305
While we're there, rejig the FL toggle callback shenanigans so that implementation details don't leak through to *other* implementations.
(i.e., leave the Kobo mess in Kobo land, with only a minimal impact on the public API and its implementation).
sometimes my kindle fires the rtc alarm a tad too late so use a more generous timeout
the real fix would be to have validateWakeupAlarmByProximity return differently if the alarm is past or in the future, but i am too lazy
Make sure we only send Suspend/Resume events when we *actually* suspend/resume. This is done via the Device `_beforeSuspend`/`_afterResume` methods, and those were called by the *input handlers*, not the PM logic; which means they would fire, while the PM logic could actually take a smarter decision and *not* do what the event just sent implied ;).
(i.e., sleep with a cover -> suspend + actual suspend, OK; but if you then resume with a button -> input assumes resume, but PM will actually suspend again!).
Existing design issue made more apparent by #9448 ;).
Also fixes/generalizes a few corner-cases related to screen_saver_lock handling (e.g., don't allow USBMS during a lock).
And deal with the fallout of the main change to the Kobo frontlight ramp behavior ;).
Allow disabling the hall efect sensor via the sysfs knob, so the kindle system wont sleep & wake the device
for those of use that stay in koreader, are caseless and have get spurious wakeups
* Rewrite the loop mechanism to use scheduled tasks instead of a single blocking-ish subprocess.
* Change the actual logic to be more pleasing to the eye, especially on newer devices, as those *may* natively ramp on set; and fix a bad interaction with that behavior that could lead to no ramp at all on ramp down.
* Simplify Generic's Suspend handling to deal with the refresh ordering in a saner manner. The screensaver might be visible a tad longer than before this change before the frontlight actually ramps off.
