* afterResume had *two* different implementations, so the historical one
that handled frontlight fixups no longer ran
(regression since #10426)
* isFrontlightOn was completely broken, for a couple of reasons:
* There was no is isFrontlightOnHW implementation, so when it ran, it
mostly always thought the frontlight was on, because
self.fl_intensity doesn't change on toggle off.
* _decideFrontlightState was never called on Kindle,
so isFrontlightOnHW was never really called, making isFrontlightOn
completely useless. Call it in setIntensityHW's coda, as it ought to
be. And properly document that.
Generic *was* calling _decideFrontlightState is setIntensity, but
*before* actually setting the frontlight, which makes no goddamn sense,
so get rid of that, too.
* Also fix frontlight toggle notifications (regression since #10305)
TL;DR: The PowerD API being a mess strikes again.
Makes more sense this way.
Re: #10828
Also clarify the UIManager "no dialogs left" message, and drop the
return value, as it's meaningless, we just want to break & return.
Extended addition of PocketBook InkPad 4 with firmware later U743g.6.8.885 (PB743G) because its device ID was corrected from PB743g to PB743G by firmware U743g.6.8.1719.
Make sure we only send Suspend/Resume events when we *actually* suspend/resume. This is done via the Device `_beforeSuspend`/`_afterResume` methods, and those were called by the *input handlers*, not the PM logic; which means they would fire, while the PM logic could actually take a smarter decision and *not* do what the event just sent implied ;).
(i.e., sleep with a cover -> suspend + actual suspend, OK; but if you then resume with a button -> input assumes resume, but PM will actually suspend again!).
Existing design issue made more apparent by #9448 ;).
Also fixes/generalizes a few corner-cases related to screen_saver_lock handling (e.g., don't allow USBMS during a lock).
And deal with the fallout of the main change to the Kobo frontlight ramp behavior ;).
cervantes kindle kobo remarkable: use sysfs carrier file to determine connection state
cleanup hasWifiManager checks
gateway check: use ip if available
Fixes: #10087Closes: #10092
* Get rid of the `canToggleGSensor` Device cap, it's now mandatory for `hasGSensor` devices. (This means Kindles can now toggle the gyro, fix#9136).
* This also means that `Device:toggleGSensor` is now implemented by `Generic`.
* Update the Screen & Gyro rotation constants to be clearer (c.f., https://github.com/koreader/koreader-base/pull/1568) (/!\ This might conceivably break some `rotation_map` user-patches).
* Input: Move the platform-specific gyro handling to Device implementations, and let Input only handle a single, custom protocol (`EV_MSC:MSC_GYRO`).
* Input: Refine the `rotation_map` disable method implemented in 43b021d37c. Instead of directly poking at the internal field, use a new method, `disableRotationMap` (/!\ Again, this might break some `rotation_map` user-patches).
* Input: Minor tweaks to event adjust hooks to make them more modular, allowing the Kobo implementation to build and use a single composite hook. API compatibility maintained with wrappers.
Adjust image colors for PocketBook color devices to supply
brighter image colors. Make it a config option so we can
adjust it to a sensible default for all devices later.
Also enable HW Dithering for color devices: the dithering
flag allows us to figure out if what is viewed is an
image or text. This way we can enable color rendering
or not based on the dithering flag.
It possibly historically never made it out of InkView in the past, but
apparently that's no longer the case and/or every other key behaves the
same way anyway, so it's harmless at worst.
Fix#9791
(This involves moving it to the instance object to avoid inheritance).
Pocketbook: Disable rotation_map on the Era (fix#9556)
It would appear that InkView handles the translation for us, now...
* Iterate over varargs directly via select if possible
* Use table.pack otherwise (https://github.com/koreader/koreader-base/pull/1535).
* This allows us to simplify a few Logger calls, as logger now handles nil values.
Basically:
* Use `extend` for class definitions
* Use `new` for object instantiations
That includes some minor code cleanups along the way:
* Updated `Widget`'s docs to make the semantics clearer.
* Removed `should_restrict_JIT` (it's been dead code since https://github.com/koreader/android-luajit-launcher/pull/283)
* Minor refactoring of LuaSettings/LuaData/LuaDefaults/DocSettings to behave (mostly, they are instantiated via `open` instead of `new`) like everything else and handle inheritance properly (i.e., DocSettings is now a proper LuaSettings subclass).
* Default to `WidgetContainer` instead of `InputContainer` for stuff that doesn't actually setup key/gesture events.
* Ditto for explicit `*Listener` only classes, make sure they're based on `EventListener` instead of something uselessly fancier.
* Unless absolutely necessary, do not store references in class objects, ever; only values. Instead, always store references in instances, to avoid both sneaky inheritance issues, and sneaky GC pinning of stale references.
* ReaderUI: Fix one such issue with its `active_widgets` array, with critical implications, as it essentially pinned *all* of ReaderUI's modules, including their reference to the `Document` instance (i.e., that was a big-ass leak).
* Terminal: Make sure the shell is killed on plugin teardown.
* InputText: Fix Home/End/Del physical keys to behave sensibly.
* InputContainer/WidgetContainer: If necessary, compute self.dimen at paintTo time (previously, only InputContainers did, which might have had something to do with random widgets unconcerned about input using it as a baseclass instead of WidgetContainer...).
* OverlapGroup: Compute self.dimen at *init* time, because for some reason it needs to do that, but do it directly in OverlapGroup instead of going through a weird WidgetContainer method that it was the sole user of.
* ReaderCropping: Under no circumstances should a Document instance member (here, self.bbox) risk being `nil`ed!
* Kobo: Minor code cleanups.
* UIManager: Support more specialized update modes for corner-cases:
* A2, which we'll use for the VirtualKeyboards keys (they'd... inadvertently switched to UI with the highlight refactor).
* NO_MERGE variants of ui & partial (for sunxi). Use `[ui]` in ReaderHighlight's popup, because of a Sage kernel bug that could otherwise make it translucent, sometimes completely so (*sigh*).
* UIManager: Assorted code cleanups & simplifications.
* Logger & dbg: Unify logging style, and code cleanups.
* SDL: Unbreak suspend/resume outside of the emulator (fix#9567).
* NetworkMgr: Cache the network status, and allow it to be queried. (Used by AutoSuspend to avoid repeatedly poking the system when computing the standby schedule delay).
* OneTimeMigration: Don't forget about `NETWORK_PROXY` & `STARDICT_DATA_DIR` when migrating `defaults.persistent.lua` (fix#9573)
* WakeupMgr: Workaround an apparent limitation of the RTC found on i.MX5 Kobo devices, where setting a wakealarm further than UINT16_MAX seconds in the future would apparently overflow and wraparound... (fix#8039, many thanks to @yfede for the extensive deep-dive and for actually accurately pinpointing the issue!).
* Kobo: Handle standby transitions at full CPU clock speeds, in order to limit the latency hit.
* UIManager: Properly quit on reboot & exit. This ensures our exit code is preserved, as we exit on our own terms (instead of being killed by the init system). This is important on platforms where exit codes are semantically meaningful (e.g., Kobo).
* UIManager: Speaking of reboot & exit, make sure the Screensaver shows in all circumstances (e.g., autoshutdown, re: #9542)), and that there aren't any extraneous refreshes triggered. (Additionally, fix a minor regression since #9448 about tracking this very transient state on Kobo & Cervantes).
* Kindle: ID the upcoming Scribe.
* Bump base (https://github.com/koreader/koreader-base/pull/1524)
In some versions of the /ebrmain/config/extensions.cfg file there is a
comment #ebrcfg. This will not match the regex and crashes koreader as
the table is empty.
Add a check to ensure the table is not empty while reading extensions
from the default file.
Schedule wifi keep-alive on wifi start but do not reschedule when
connection is lost. This will make sure this code is not run when
wifi is disabled again saving some battery and cpu cycles.
* Rejig frontlight warmth API to more closely match the existing API, and, hopefully, clarify some of its quirks, and reduce boilerplate and duplicate code in platform implementations.
* Tweak Kindle:setDateTime to prefer using the platform's custom script, as in interacts better with the stock UI. And make the fallbacks handle old busybox versions better.
* Add Kindle PW5 support ;).
* Add warmth support to the Kindle platform.
* Random TextBoxWidget cleanups: make sure we immediately free destroyed instances.
* FrontLightWidget: Refactor to make it slightly less obnoxious to grok and update; i.e., separate layout from update, and properly separate brightness from warmth handling. Move to simpler widgets instead of reinventing the wheel.
* TextBoxWidgets: Implement `setText` to match TextWidget's API, as some callers may be using the two interchangeably (i.e., Button).
* NaturalLightWidget: Make sure we pass a string to InputText
* InputText: Add debug guards to catch bad callers not passing strings ;).
Function `SetSubtaskInfo` takes only chars as a valid book. Since
filename can be `nil` (not a char) the crash would happen. This
Change avoids the crash by using a char type nil value. See:
`int SetSubtaskInfo(int task, int subtask, const char *name, const char *book);`
Fixes#8053Fixes#8392 too
Fixes#8743 last issue
With the inkview library inverting the screen seems possible but needs some
discussion with the developers of Pocketbook. For now disable HWInvert so
this feature is not broken while we figure out how to change the invert with inkview.
This change drops the #koreader signature check.
This check prevents KOReader from modifying associations if something else has changed the file without putting a verbatim "#koreader" string back.
While this prevents KOReader from interfering with another application or the system trying to own the file, it also leads to hard to diagnose issues, when the user can inadvertently change associations without realising they’re doing so, and being unable to return back.
I've emailed with PocketBook about the problem with Wifi on the newer models. They explained the wrong constant was being used:
> Dear Robert,
>
> Thank you for choosing Pocketbook.
> Wi-Fi Connection" enabled when no connection:
> https://github.com/koreader/koreader/issues/8617
> The problem is in incorrect usage of constant. You should use flag NET_CONNECTED with bit AND operation as shown in example below.
>
> function NetworkMgr:isWifiOn()
> local state = inkview.QueryNetwork()
> return band(state, C.NET_CONNECTED) ~= 0
> end
>
> Inkpad3 Wifi Standby
> https://github.com/koreader/koreader/issues/4747
> the same solution for this issue
Related issues:
https://github.com/koreader/koreader/issues/8617https://github.com/koreader/koreader/issues/4747
Since I made the previous hack and their suggestion seems to work on the PB741 color. I've made this PR to remove my hack.
It might be wise to also test this fix on older models.
Fixes#4747.
Apparently, inkview.NetConnect() doesn’t enable the Wi-Fi on its own,
this results in a failure if the device has been put into the sleep or
standby mode, when the Wi-Fi hardware is powered down.
Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
The hyphenation of a word can be changed from its default
by long pressing for 3 seconds and selecting 'Hyphenate'.
These overrides are stored in a per-language file, i.e:
koreader/settings/user-German.hyph.
