Slow browsing and exiting (ex: closing History) could
be noticed when the memory usage is already high (as the
GC has a lot of memory to visit). Delaying it to after
the new screen is shown limits the feeling of slowness.
there is no need to pass the caller rather just the table where the setting is located. passing the setting alone is not enough as sometimes it is nil and then you do not get a reference to its location
* Revamped most actions that require an internet connection to a new/fixed backend that allows forwarding the initial action and running it automatically once connected. (i.e., it'll allow you to set "Action when Wi-Fi is off" to "turn_on", and whatch stuff connect and do what you wanted automatically without having to re-click anywhere instead of showing you a Wi-Fi prompt and then not doing anything without any other feedback).
* Speaking of, fixed the "turn_on" beforeWifi action to, well, actually work. It's no longer marked as experimental.
* Consistently use "Wi-Fi" everywhere.
* On Kobo/Cervantes/Sony, implemented a "Kill Wi-Fi connection when inactive" system that will automatically disconnect from Wi-Fi after sustained *network* inactivity (i.e., you can keep reading, it'll eventually turn off on its own). This should be smart and flexible enough not to murder Wi-Fi while you need it, while still not keeping it uselessly on and murdering your battery.
(i.e., enable that + turn Wi-Fi on when off and enjoy never having to bother about Wi-Fi ever again).
* Made sending `NetworkConnected` / `NetworkDisconnected` events consistent (they were only being sent... sometimes, which made relying on 'em somewhat problematic).
* restoreWifiAsync is now only run when really needed (i.e., we no longer stomp on an existing working connection just for the hell of it).
* We no longer attempt to kill a bogus non-existent Wi-Fi connection when going to suspend, we only do it when it's actually needed.
* Every method of enabling Wi-Fi will now properly tear down Wi-Fi on failure, instead of leaving it in an undefined state.
* Fixed an issue in the fancy crash screen on Kobo/reMarkable that could sometime lead to the log excerpt being missing.
* Worked-around a number of sneaky issues related to low-level Wi-Fi/DHCP/DNS handling on Kobo (see the lengthy comments [below](https://github.com/koreader/koreader/pull/6424#issuecomment-663881059) for details). Fix#6421
Incidentally, this should also fix the inconsistencies experienced re: Wi-Fi behavior in Nickel when toggling between KOReader and Nickel (use NM/KFMon, and run a current FW for best results).
* For developers, this involves various cleanups around NetworkMgr and NetworkListener. Documentation is in-line, above the concerned functions.
use `device` `filemanager` `rolling` and `paging` sections to organize the
dispatcher menu and allow the user to know when the action will apply
add events from ReaderGesture
allow profiles in FM
add a Dispatcher module that allows for dispatching multiple events at once.
This will allow for profiles & for gestures that do multiple things.
it has 2 methods:
Execute which is given a kv table of settings to change and fires an event for each of them.
addSubMenu adds a menu item to a menu to allow for modifying which events are called
it also has settingsList which is a master table of all allowed setting and their corresponding info
(it is mostly from ReaderGesture and needs a lot of work)
to allow for a new setting all one has to do is add a entry to settingsList with a corresponding event and it will work out of the box.
the profile plugin is right now still a stub, just to test Dispatcher. the plan is to finish it and eventually refactor ReaderGesture to rely on this.
This also needs effort to move many functions out of reader gesture into events where they belong.
joins calibre metadata search and calibre wireless connections into a single plugin
search metadata changes:
- search directly into calibre metadata files.
- search can be performed on more than one library (configurable from a menu)
- device scans now find all calibre libraries under a given root
- search options can be configured from a menu. (case sensitive, find by title, author and path)
- removed legacy global variables.
- *option* to search from the reader
- *option* to generate a cache of books for faster searches.
calibre wireless connection changes:
- keep track of books in a library (includes prunning books from calibre metadata if the file was deleted locally)
- remove files on device from calibre
- support password protected connections
- FM integration: if we're in the inbox dir it will be updated each time a book is added or deleted.
- disconnect when requested by calibre, available on newer calibre versions (+4.17)
- remove unused opcodes.
- better report of client name, version and device id
- free disk space checks for all calibre versions
- bump supported extensions to match what KOReader can handle. Users can override this with their own list of extensions (or from calibre, by configuring the wireless device).
- Fix wrong values for books opened (or first opened)
from April 14th to May 20th: highlights and notes
possibly being NULL was preventing nb of pages and
last_open from being fetched.
- Re-order current book and all books stat items to some
hopefully more sensible order.
- Some rewording for clarity.
KeyValuePage:
- Have value_overflow_align="right" only align right
when value overflows 1/2 screen width, but not
when only key overflows that.
- Show truncated text also on Tap when there is no
callback.
This number might have been leaking from a previously opened
book, and can be innacurate.
Reset it from the number of highlights stored in settings.
Note that the number of "Notes" shown does not mean much.
- Use same names for options;
- Have them both movable
- Add option to keep widget shown on Apply (and use that
when appropriate: when the value may have an immediate
visual effect, so one can tweak it without having to
go thru menus to re-open it again).
Simplify (and avoid edge cases) in other code by having
ReadHistory manage the "lastfile" setting on add, remove,
rename...
Fixed a few other cases of things not updated.
- Show output in a TextViewer with a monospace font.
- Include stderr, so errors are shown
- Use Trapper to allow interrupting command (and to fix
some refresh issues)
Really needed these :resetLayout() (as done in Menu.lua)
when stuff is right aligned (otherwise, first computation
of x-offset, when there was no content, being Screen.width,
would stick, and would draw the content off-screen on the
right - no issue noticed when left-aligned as the offsets
would stay being 0 whether there is content or none).
So that Statistics settings modified while in FileManager
are saved.
Also allows resetting statistics when in FileManager
(where there is no current book id to exclude).
Also adds options to remove statistics for books
with low reading duration (to clean up stats for
books just quickly browsed and not yet read).
Also adds TextWidget:getFontSizeToFitHeight()
even if we ended up not using it.
* File search: Don't traverse hidden folders if we're not showing them
Re https://www.mobileread.com/forums/showpost.php?p=3949194&postcount=21
* Ignore macOS resource forks, too.
* Apply the same logic to the BookInfo directory walker
* And never ever show resource forks in the FM, either.
Update shellcheck and shfmt to the latest version.
Fixes <https://github.com/koreader/koreader/issues/5152>.
Btw, you can apply shellcheck suggestions with a command like:
```
shellcheck --include=SC2250 -f diff *.sh | git apply
```
Gives the book language to Text*Widget (and XText) when
drawing title, authors and other metadata text.
Might be needed to properly display a Japanese book title
when the UI language is Chinese.
The edited `netsh` command line had errors:
1- missing v4tov4 (or v6 variant)
2- should have `=` instead of `:`
3- typo in listen(ing)address and listen(ing)port
bidi.lua:
- Revert "Alias everything to Bidi.nowrap() when in LTR UI,
as using LTR isolates seems uneeded when already LTR" (part
of a628714f) which was a wrong assumption: we need proper
wrappers for all things paths. Enhance some of these wrappers.
- Fix GetText RTL wrapping which was losing empty lines and
trailing \n.
- Wrap all paths, directories, filenames in the code with
these wrappers.
- Wrap all book metadata (title, authors...) with BD.auto(),
as it helps fixing some edge cases (like open/close quotation
marks which are not considered as bracket types by FriBiDi).
(Needed some minor logic changes in CoverBrowser.)
- Tweak hyphenation menu text
- Update forgotten SortWidget for UI mirroring
- KoptConfig: update "justification" index for RTL re-ordering,
following the recent addition of the page_gap_height option.
Replaces DAUTO_SAVE_PAGING_COUNT in defaults.lua with
a new option available in menu, that allows setting
an interval in minutes instead of a page count.
Update words wrapping tweaks for use_xtext: add zero-width spaces
around dots and underscores to allow more wraps.
Fix overlap of directory name and nbitems for long directory names.
Small tweaks all around to handle UI mirroring:
- swap existing symbols like arrows, or use alternative ones
- rotate some images, like chevrons and dogear icons
- flip some left and right swipe handling
- flip some geometry arithmetic like tap on left or right
side of page or dict window
- use new ProgressWidget:getPercentageFromPosition() instead
of geometry arithmetic
- BD.wrap() some concatenated string bits, like in reader
and menu footers
- flip inverse_reading_order when UI is mirrored
More specific tweaks:
- ReaderGesture: reset some specific gestures when UI direction
has changed (tap on top/bottom left/right corners, for
bookmarks and FileManager "Plus menu").
- ReaderRolling: show markers on the correct side of page,
in single or dual page mode.
- KoptOptions: swap left and right icons in Alignment toggle
- CheckMark: proper rendering in all 4 mirroring/rtl combinations.
- VirtualKeyboard: forbid any mirroring
- Move util.getMenuText into Menu.lua
Allow TextBoxWidget new text direction/lang parameters to be
set on upper widgets, and propagate them all the way to it
(ScrollTextWidget, InputText, InputDialog, TextViewer).
Use specific non-default ones in some specific cases:
- Force LTR text direction when showing HTML and CSS, and
configuration files (in some plugins).
- Use Wikipedia server language and text direction when
showing an article.
- Use auto with Dictionary results, as we don't know the
dictionary language, and they may contain mixed content.
- Force LTR when showing some paths (still needs more of them)
TextEditor plugin: add 2 new options "Auto paragraph direction"
and "Force paragraph direction LTR".
Footnotes popup: grab HTML direction, and forward it
to MuPDF for proper display.
Left align partially filled rows for File browser/chooser, but
have them centered for History and Favorites for a prettier
look when only a few items are displayed.
- fix incorrectly shown awake, sleeping, charging and discharging,
- remove unneeded debug mode and logging to external file,
- prevent showing values like inf, -inf, nan in estimated times
(we now show "n/a"), and values below zero,
- show extra confirm box when we want to reset data,
- show time in format xxhxxm instead of only pure minutes,
- check at initialization that the device was charging when it was
turned off (battery level larger than at the time of exit).
Avoid saving/getting "12.0" (as the lua-ljsqlite3 driver does),
and save/get "12" instead by properly converting it to a string
and back, as the config.value table column is of type TEXT.
- Use a hardcoded default value of 10 files per page.
- Save cover sizetag as "s<nb of items per page>" instead
of "s<item height>" so they are stable (and not re-fetched)
when switching between FileBrowser and History, which have
some small geometry differences.
- When showing History in landscape mode, decrease perpage
from the set value, so items don't look smaller.
- Use a step, larger with big items, when iterating and decreasing
font sizes to make text fit, to speed up the process a bit.
Lots of code was doing some renderText calls to get the size
of some text string, and truncate it to some width if needed,
with or without an added ellipsis, before instantiating
a TextWidget with that tweaked text string.
This PR fixes/adds some properties and methods to TextWidget
so all that can be done by it. It makes the calling code
simpler, as they don't need to use RenderText directly.
(Additionally, when we go at using Harfbuzz for text rendering,
we'll just have to update or replace textwidget.lua without
the need to update any higher level code.)
Also:
- RenderText: removed the space added by truncateTextByWidth
after the ellipsis, as it doesn't feel needed, and break
right alignment of the ellipsis with other texts.
- KeyValuePage: fix some subtle size and alignment issues.
- NumberPickerWidget: fix font size (provided font size was
not used)
* Changed File Browser text
KOReader looks nicer than KOReader File Browser,
* Remove the "page x of x" if only one page
Removes it from the bottom of the file browser
* Remove the "page x of x" if only one page
Removes it from the top menu, if there is only one page, why show page 1 of 1
* Renamed ~ to Home
Since the file browser can be considered "Home"
* Added 12 hour time option
Also tweaked the charging icon, ⚡ looks nicer than +, tweaked seperator between time and battery, - instead of @
A new setting has been adding allowing to set a comma separated list of
tags to ignore.
Entries with either of these tags will be skipped by the client when
fetching the list of articles to download. Extra articles will be
fetched from the server to make up for the skipped articles, ensuring to
meet the target number of articles.
Currently, all the articles were converted to .epub by default. When
handling an article that linked to a .pdf file, it resulted in an
unreadable file.
This patch skips the conversion for a pdf file, and download it directly
instead.
Adds joplin support, fixes https://github.com/koreader/koreader/issues/5086
Changes
-adds a submenu to evernote menu
- -Joplin
|-Set IP and port
|-Set authorization token
|-Export to Joplin
|-Help
-adds EvernoteExporter:exportBooknotesToJoplin()
-adds JoplinClient.lua
-modifies html_export, txt_export and joplin_export flags to work with each other. (eg if user selects one others deactivated)
