* Namely, ensure zoom_mode is consistent with genus & type *both ways*. (I only dealt with the "no zoom_mode" case in my original fixup).
Because documents with settings dating back from before the new zoom modes had "old" zoom_mode settings mixed with "new" genus/type defaults that didn't agree with each other.
It lead to super-confusing ConfigDialog behavior, because ConfigDialog was in fact not reflecting the reality.
(As the source of truth is actually `zoom_mode`).
* There was a snafu in manual mode, because of the extremely weird way prefixes are handled by Configurable/ReaderConfig/DocSettings/ConfigDialog.
So, make sure we only have a *single* zoom_factor, and that it's updated and saved properly under the right name everywhere.
Fixes inconsistencies between first swapping to manual mode, and what the ConfigDialog said/did (because again: possibly a lie), vs., re-opening the same document, which would magically use *different* settings, closer to what was expected (but still broken because of the prefix mismatch and a disagreement on defaults between the two variants).
Fallout from #6885
It appears the fancy split settings from #6885 were not being honored at all.
Also:
* Made sure "pagewidth" is actually the default zoom mode again, "full" had sneaked in as the default state of the zoom type toggle).
* Display human-readable values in the "Make as default" popup, instead of the raw, meaningless numerical setting.
* Disable zoom options when reflow is enabled, and restore 'em properly when it's disabled.
Fix#7461, #7228, #7192
Followup to #7306.
As discussed there, the only way to make everybody happy is to make 'em context-aware. At which point, trying to make the fact that it's a *device* rotation and not a *content* one come across in the icon design loses its interest, and would actually only further muddy the issue.
So, these are similar is spirit to the traditional rotation icons in pretty much anything that can rotate text content, with a special inspiration from the Kindle 4 & PocketBook UI.
Fix#7429
* Wherever possible, do an actual dumb invert on the Screen BB instead of repainting the widget, *then* inverting it (which is what the "invert" flag does).
* Instead of playing with nextTick/tickAfterNext delays, explicitly fence stuff with forceRePaint
* And, in the few cases where said Mk. 7 quirk kicks in, make the fences more marked by using a well-placed WAIT_FOR_UPDATE_COMPLETE
* Fix an issue in Button where show/hide & enable/disable where actually all toggles, which meant that duplicate calls or timing issues would do the wrong thing. (This broke dimming some icons, and mistakenly dropped the background from FM chevrons, for example).
* Speaking of, fix Button's hide/show to actually restore the background properly (there was a stupid typo in the variable name)
* Still in Button, fix the insanity of the double repaint on rounded buttons. Turns out it made sense, after all (and was related to said missing background, and bad interaction with invert & text with no background).
* KeyValuePage suffered from a similar issue with broken highlights (all black) because of missing backgrounds.
* In ConfigDialog, only instanciate IconButtons once (because every tab switch causes a full instantiation; and the initial display implies a full instanciation and an initial tab switch). Otherwise, both instances linger, and catch taps, and as such, double highlights.
* ConfigDialog: Restore the "don't repaint ReaderUI" when switching between similarly sized tabs (re #6131). I never could reproduce that on eInk, and I can't now on the emulator, so I'm assuming @poire-z fixed it during the swap to SVG icons.
* KeyValuePage: Only instanciate Buttons once (again, this is a widget that goes through a full init every page). Again, caused highlight/dimming issues because buttons were stacked.
* Menu: Ditto.
* TouchMenu: Now home of the gnarliest unhilight heuristics, because of the sheer amount of different things that can happen (and/or thanks to stuff not flagged covers_fullscreen properly ;p).
* Bump base
https://github.com/koreader/koreader-base/pull/1280https://github.com/koreader/koreader-base/pull/1282https://github.com/koreader/koreader-base/pull/1283https://github.com/koreader/koreader-base/pull/1284
* Bump android-luajit-launcher
https://github.com/koreader/android-luajit-launcher/pull/284https://github.com/koreader/android-luajit-launcher/pull/285https://github.com/koreader/android-luajit-launcher/pull/286https://github.com/koreader/android-luajit-launcher/pull/287
- Add IconWidget, use it for icons instead of ImageWidget.
Specify icons by name only, look for them (with either
.svg or .png suffixes) in multiple directories (including
koreader/settings/icons/ to allow customizing them).
Don't crash when icon name not found, shown a black
background warning icon instead.
- Don't trust the icons' native sizes: replace
scale_for_dpi=true with width/height=DGENERIC_ICON_SIZE,
so all icons get the same (tunable) size - except in
a few specific use cases.
- Top and bottom menu bars: normalize, and have icons
properly centered in them, extend vertical line
separators up to the edges.
- TOC: adjust expand/collapse icons size to items size
Avoid crash with RTL UI after options we moved.
Swap Zoom direction items when RTL UI.
Also don't check show_func when sizing the names
on the bottom menu, to avoid icons moving or
resizing when toggling options.
- Move zoom options from top menu to bottom config
- Add option to manually define zoom (relative to
page width) and overlap (in percent)
- Add options to zoom to columns or rows, possibly
with overlap. Add panning direction options when
page forward in these modes
* landscape FM / Refactor rotation
refactor and simplify the orientation handling code. the user generally cares about the rotation (what direction the device is facing) and not about if koreader is displaying in portrait or landscape mode
* bump base
update luasocket, libjpeg-turbo, curl
add logging to evernote-sdk-lua
update framebuffer for proper rotation
Mostly for the PDF bottom menu.
- Reorganize by topic, trying to limit the number
of widgets per panel to 4.
- Re-order some toggles from low to high ('off' then 'on').
- Show font size as number instead of a list of "Aa".
- PDF: add more font size values, and increase usable
contrast values.
- Add help_text to most PDF toggle titles.
- CRE line spacing: increase fine tuning min and max.
Also avoid zoom advice messages on book load.
bidi.lua:
- Revert "Alias everything to Bidi.nowrap() when in LTR UI,
as using LTR isolates seems uneeded when already LTR" (part
of a628714f) which was a wrong assumption: we need proper
wrappers for all things paths. Enhance some of these wrappers.
- Fix GetText RTL wrapping which was losing empty lines and
trailing \n.
- Wrap all paths, directories, filenames in the code with
these wrappers.
- Wrap all book metadata (title, authors...) with BD.auto(),
as it helps fixing some edge cases (like open/close quotation
marks which are not considered as bracket types by FriBiDi).
(Needed some minor logic changes in CoverBrowser.)
- Tweak hyphenation menu text
- Update forgotten SortWidget for UI mirroring
- KoptConfig: update "justification" index for RTL re-ordering,
following the recent addition of the page_gap_height option.
Small tweaks all around to handle UI mirroring:
- swap existing symbols like arrows, or use alternative ones
- rotate some images, like chevrons and dogear icons
- flip some left and right swipe handling
- flip some geometry arithmetic like tap on left or right
side of page or dict window
- use new ProgressWidget:getPercentageFromPosition() instead
of geometry arithmetic
- BD.wrap() some concatenated string bits, like in reader
and menu footers
- flip inverse_reading_order when UI is mirrored
More specific tweaks:
- ReaderGesture: reset some specific gestures when UI direction
has changed (tap on top/bottom left/right corners, for
bookmarks and FileManager "Plus menu").
- ReaderRolling: show markers on the correct side of page,
in single or dual page mode.
- KoptOptions: swap left and right icons in Alignment toggle
- CheckMark: proper rendering in all 4 mirroring/rtl combinations.
- VirtualKeyboard: forbid any mirroring
- Move util.getMenuText into Menu.lua
The current name causes people to think of scrolling, which is slightly awkward on E Ink. For example, see <https://github.com/koreader/koreader/issues/5166#issuecomment-517771475>.
> But this on LCD, not E-ink where the lag is unbearable, especially if you want to correct any scrolling over/undershoot.
Scroll mode is a misnomer. It should be renamed continuous. I use "scroll mode" as the default, but I seldom or never scroll. Conversely, you can still scroll in paged mode if a page is longer than the screen. As far as I'm concerned if you're scrolling (panning) you may be doing it wrong, but to anyone reading: you do you. ;-)
This internal ButtonProgressWidget widget was behaving
differently from all others (OptionTextItem, OptionIconItem
and ToggleSwitch) by duplicating some code from
ConfigDialog:onConfigChoose() instead of calling it directly.
While making it similar to others, I noticed that onConfigChoose()
did a full repaint, which was necessary for some settings to
be applied (ie: Contrast).
On CreDocument, this full repaint may cause some double drawing
on config changes (ie: Margins, drawing once after margin changes,
and then re-positionning to previous xpointer).
So, make the need for full repaint a condition on KoptOptions.
* Enable HW dithering on supported devices (Clara HD, Forma; Oasis 2, PW4)
* FileManager and co. (where appropriate, i.e., when covers are shown)
* Book Status
* Reader, where appropriate:
* CRe: on pages whith image content (for over 7.5% of the screen area, should hopefully leave stuff like bullet points or small scene breaks alone).
* Other engines: on user-request (in the gear tab of the bottom menu), via the new "Dithering" knob (will only appear on supported devices).
* ScreenSaver
* ImageViewer
* Minimize repaints when flash_ui is enabled (by, almost everywhere, only repainting the flashing element, and not the toplevel window which hosts it).
(The first pass of this involved fixing a few Button instances whose show_parent was wrong, in particular, chevrons in the FM & TopMenu).
* Hunted down a few redundant repaints (unneeded setDirty("all") calls),
either by switching the widget to nil when only a refresh was needed, and not a repaint,
or by passing the appropritate widget to setDirty.
(Note to self: Enable *verbose* debugging to catch broken setDirty calls via its post guard).
There were also a few instances of 'em right behind a widget close.
* Don't repaint the underlying widget when initially showing TopMenu & ConfigDialog.
We unfortunately do need to do it when switching tabs, because of their variable heights.
* On Kobo, disabled the extra and completely useless full refresh before suspend/reboot/poweroff, as well as on resume. No more double refreshes!
* Fix another debug guard in Kobo sysfs_light
* Switch ImageWidget & ImageViewer mostly to "ui" updates, which will be better suited to image content pretty much everywhere, REAGL or not.
PS: (Almost 💯 commits! :D)
* Enforce a known rotation on startup, to make sure we handle touch input coordinates properly.
* Proper FrontLight warmth support (thanks to @cairnsh & @pazos in #4291)!
* Fix the PageTurn buttons mapping to match Nickel's defaults
* Properly remap PageTurn buttons depending on the current rotation.
* Actually enable the Mk.7 screen refresh codepath on *all* Mk.7 devices (I'd messed up the device check...).
* Full accelerometer handling (includes a touch of refactoring regarding orientation handling in general).
* Fix insidiously broken USBMS behavior in Nickel after we exit on FW >4.8.
Fix#4291Fix#3002
* [toggleswitch] Add support for key navigation to this widget
Add the onFocus an onUnfocus event handler
add a new function that just circle the switch if not touch event is
detected
* Add key navigation to the readermenu
The shortcut is still Alt-gr on sdl, to be defined on Kindle
* Remove the old method of handling the Press key.
Now the event is handled by the main widget who implement focusmanager
and then dispatched to the currently focused item.
Modify the fine font tuning only for non touch-devices
See : https://github.com/koreader/koreader/pull/3785#issuecomment-375306466
This is a major overhaul of the hardware abstraction layer.
A few notes:
General platform distinction happens in
frontend/device.lua
which will delegate everything else to
frontend/device/<platform_name>/device.lua
which should extend
frontend/device/generic/device.lua
Screen handling is implemented in
frontend/device/screen.lua
which includes the *functionality* to support device specifics.
Actually setting up the device specific functionality, however,
is done in the device specific setup code in the relevant
device.lua file.
The same goes for input handling.
