Migrate *global* zoom_mode settings to genus/type, too.
Nothing can actually set this as a global anymore, but we still honored
it nonetheless.
Fix#7778
* Namely, ensure zoom_mode is consistent with genus & type *both ways*. (I only dealt with the "no zoom_mode" case in my original fixup).
Because documents with settings dating back from before the new zoom modes had "old" zoom_mode settings mixed with "new" genus/type defaults that didn't agree with each other.
It lead to super-confusing ConfigDialog behavior, because ConfigDialog was in fact not reflecting the reality.
(As the source of truth is actually `zoom_mode`).
* There was a snafu in manual mode, because of the extremely weird way prefixes are handled by Configurable/ReaderConfig/DocSettings/ConfigDialog.
So, make sure we only have a *single* zoom_factor, and that it's updated and saved properly under the right name everywhere.
Fixes inconsistencies between first swapping to manual mode, and what the ConfigDialog said/did (because again: possibly a lie), vs., re-opening the same document, which would magically use *different* settings, closer to what was expected (but still broken because of the prefix mismatch and a disagreement on defaults between the two variants).
Fallout from #6885
Ought to be faster than our naive array-based approach.
Especially for the glyph cache, which has a solid amount of elements,
and is mostly cache hits.
(There are few things worse for performance in Lua than
table.remove @ !tail and table.insert @ !tail, which this was full of :/).
DocCache: New module that's now an actual Cache instance instead of a
weird hack. Replaces "Cache" (the instance) as used across Document &
co.
Only Cache instance with on-disk persistence.
ImageCache: Update to new Cache.
GlyphCache: Update to new Cache.
Also, actually free glyph bbs on eviction.
* Minor updates to the min & max cache sizes (16 & 64MB). Mostly to satisfy my power-of-two OCD.
* Purge broken on-disk cache files
* Optimize free RAM computations
* Start dropping LRU items when running low on memory before pre-rendring (hinting) pages in non-reflowable documents.
* Make serialize dump the most recently *displayed* page, as the actual MRU item is the most recently *hinted* page, not the current one.
* Use more accurate item size estimations across the whole codebase.
TileCacheItem:
* Drop lua-serialize in favor of Persist.
KoptInterface:
* Drop lua-serialize in favor of Persist.
* Make KOPTContext caching actually work by ensuring its hash is stable.
It appears the fancy split settings from #6885 were not being honored at all.
Also:
* Made sure "pagewidth" is actually the default zoom mode again, "full" had sneaked in as the default state of the zoom type toggle).
* Display human-readable values in the "Make as default" popup, instead of the raw, meaningless numerical setting.
* Disable zoom options when reflow is enabled, and restore 'em properly when it's disabled.
Fix#7461, #7228, #7192
* LuaSettings/DocSettings: Updated readSetting API to allow proper initialization to default.
Use it to initialize tables, e.g., fixing corner-cases in readerFooter that could prevent settings from being saved.
(Fixes an issue reported on Gitter).
* LuaSettings/DocSettings: Add simpler API than the the flip* ones to toggle boolean settings.
* Update LuaSettings/DocSettigns usage throughout the codebase to use the dedicated boolean methods wher appropriate, and clean up some of the more mind-bending uses.
* FileChooser: Implement an extended default exclusion list (fix#2360)
* ScreenSaver: Refactor to avoid the pile of kludges this was threatening to become. Code should be easier to follow and use, and fallbacks now behave as expected (fix#4418).
- Move zoom options from top menu to bottom config
- Add option to manually define zoom (relative to
page width) and overlap (in percent)
- Add options to zoom to columns or rows, possibly
with overlap. Add panning direction options when
page forward in these modes
* When auto_refresh_time is enabled, don't actually refresh anything when the footer is hidden.
* Fix a bunch of state tracking related to height computations, meaning `getHeight()` is now actually accurate, always, and we don't need shitty workarounds anymore.
* `footer_container.dimen.h` *includes* the progress bar, so, never reset it to 0 unless the progress bar is disabled (some `settings.progress_bar_position` codepaths were mistakenly doing just that).
* More aggressively set/reset `footer_text.height` (not sure this one makes much of a difference, and/or if it's actually useful at all, but, the tracking was already there, but hella inconsistent, so, just fix it).
* Honor `settings.reclaim_height` in other bits of code that were only checking `footer_visible` to figure out the visible page area.
* Ask ReaderView to update the `visible_area` *now* when toggling the footer's visibility (for ReaderPaging).
Mostly for the PDF bottom menu.
- Reorganize by topic, trying to limit the number
of widgets per panel to 4.
- Re-order some toggles from low to high ('off' then 'on').
- Show font size as number instead of a list of "Aa".
- PDF: add more font size values, and increase usable
contrast values.
- Add help_text to most PDF toggle titles.
- CRE line spacing: increase fine tuning min and max.
Also avoid zoom advice messages on book load.
This commit standardizes the various todos around the code a bit in a manner recognized by LDoc.
Besides drawing more attention by being displayed in the developer docs, they're also extractable with LDoc on the command line:
```sh
ldoc --tags todo,fixme *.lua
```
However, whether that particular usage offers any advantage over other search tools is questionable at best.
* and some random beautification
TouchMenu: added options to menu items with the following defaults:
keep_menu_open = false
hold_keep_menu_open = true
So, default for Tap callback is to close menu, and for Hold callback
to keep menu open.
In both cases, provide the TouchMenu instance as the 1st argument to
the callback functions (instead of a refresh_menu_func I added in #3941)
so the callback can do more things, like closing, refreshing,
changing menu items text and re-ordering...
ReaderZooming: show symbol for default (like it was done for
ReaderFont, ReaderHyphenation...)
TextEditor plugin: update the previously opened files list in real
time, so the menu can be kept open and used as the TextEditor main
interface.
SSH plugin: keep menu open and update the Start/Stop state in real time
ReadTimer plugin: tried to do what feels right (but I don't use it)
Also remove forgotten cp in the move/paste file code
New zoom configuration available among the others
Allows to easily navigate in two-column documents
In order to work properly, **scroll mode must be deactivated**
The best zoom is obtained with proper cropping around the two columns (should be the default one for content-width)
Fixes#501
this should implement feature request of zoom mode for multi-columns
page in #501
This PR depends on koreader/koreader-base#435
How to use?
1. Tap the top left corner of a PDF/Djvu page to get into the flipping
mode
2. Double-tap on text block will zoom in to that column
3. Double-tap on any area will zoom out to an overview of the page
4. repeat step 2 to focus to another page block
How does it work?
1. We first find the mask of text blocks in the page. (Pic 1)
2. Then we intersect page boxes with user tap to form a page block. (Pic 2)
3. Finally we zoom the page to the page block and center current view to
that block. (Pic 3)
This is the remaining gruntwork of #1276. I believe that only leaves networkmgr.lua and filemanagersearch.lua, which will require a little more thought.
This is a major overhaul of the hardware abstraction layer.
A few notes:
General platform distinction happens in
frontend/device.lua
which will delegate everything else to
frontend/device/<platform_name>/device.lua
which should extend
frontend/device/generic/device.lua
Screen handling is implemented in
frontend/device/screen.lua
which includes the *functionality* to support device specifics.
Actually setting up the device specific functionality, however,
is done in the device specific setup code in the relevant
device.lua file.
The same goes for input handling.
