Make Notification have toast=true, and UIManager deal
specifically with such widget:
a "toast" widget gets closed by any event, and let
the event be handled by a lower widget.
This should allow us to not wait or tap to get rid
of a notification, and just go on with what we're
doing.
Also make them have a default timeout of 2s,
used with all existing ones.
* Wherever possible, do an actual dumb invert on the Screen BB instead of repainting the widget, *then* inverting it (which is what the "invert" flag does).
* Instead of playing with nextTick/tickAfterNext delays, explicitly fence stuff with forceRePaint
* And, in the few cases where said Mk. 7 quirk kicks in, make the fences more marked by using a well-placed WAIT_FOR_UPDATE_COMPLETE
* Fix an issue in Button where show/hide & enable/disable where actually all toggles, which meant that duplicate calls or timing issues would do the wrong thing. (This broke dimming some icons, and mistakenly dropped the background from FM chevrons, for example).
* Speaking of, fix Button's hide/show to actually restore the background properly (there was a stupid typo in the variable name)
* Still in Button, fix the insanity of the double repaint on rounded buttons. Turns out it made sense, after all (and was related to said missing background, and bad interaction with invert & text with no background).
* KeyValuePage suffered from a similar issue with broken highlights (all black) because of missing backgrounds.
* In ConfigDialog, only instanciate IconButtons once (because every tab switch causes a full instantiation; and the initial display implies a full instanciation and an initial tab switch). Otherwise, both instances linger, and catch taps, and as such, double highlights.
* ConfigDialog: Restore the "don't repaint ReaderUI" when switching between similarly sized tabs (re #6131). I never could reproduce that on eInk, and I can't now on the emulator, so I'm assuming @poire-z fixed it during the swap to SVG icons.
* KeyValuePage: Only instanciate Buttons once (again, this is a widget that goes through a full init every page). Again, caused highlight/dimming issues because buttons were stacked.
* Menu: Ditto.
* TouchMenu: Now home of the gnarliest unhilight heuristics, because of the sheer amount of different things that can happen (and/or thanks to stuff not flagged covers_fullscreen properly ;p).
* Bump base
https://github.com/koreader/koreader-base/pull/1280https://github.com/koreader/koreader-base/pull/1282https://github.com/koreader/koreader-base/pull/1283https://github.com/koreader/koreader-base/pull/1284
* Bump android-luajit-launcher
https://github.com/koreader/android-luajit-launcher/pull/284https://github.com/koreader/android-luajit-launcher/pull/285https://github.com/koreader/android-luajit-launcher/pull/286https://github.com/koreader/android-luajit-launcher/pull/287
Restore feature removed in c98dfef7: tap on title
to set dict of current result as a preferred dictionary
for this document.
Changes from former implementation:
- trust sdcv for ordering, instead of doing it ourselves
by looking at the results (which didn't always work)
- allow setting multiple preferred dicts
- order of preference is shown with a number as a prefix
to the dictionary name in the title
- taping again allows removing it from preferred dicts,
and taping again allows setting it back as the first
preferred dict
By having the same DoubleSpinWidget launched when
hitting "..." on any of Top margin or Bottom margin
progress bars.
DoubleSpinWidget: remove blank space when no info_text.
Add UIManager:discardEvents(), to allow dropping events
for a period of time.
Default duration of 600ms on eInk, 300ms otherwise.
Used when showing the dict result window, so that a tap
happening just when it's being shown won't discard it.
Used with Trapper:confirm()/:info(), to avoid taps made
in a previous processing to dismiss (and so, select the
cancel action) a ConfirmBox not yet painted/visible.
Don't cleanup input text as much when entered manually
(or when it's sane) than when coming from book text
selection.
This may allow looking up words like "-suffix", or
do more precise Wikipedia queries.
- Rework widget layout to avoid implicit (and wrong)
sizing, using proper padding/margins and correct
measurements of components.
- Adjust lookup word font size so it's not smaller
than the definition.
- Tweak small window positionning: keep it centered
if possible, only move it to keep the highlighted
word shown when we can.
- Large window: adjust to screen size correctly,
leaving room for footer.
- Always have a "Close" button at bottom right.
Former always displayed button "Follow link" will
be added as a 3rd row in the rare case we select
a word in a link.
- Replace "tap on lookup word to edit and redo the
query" with an icon on the right: tap on it to
edit the queries word, long-press to edit the
current result word. Only close the current dict
window when lookup is launched.
- Remove feature "tap on title to set current dict
as the default dict for this document", as it didn't
really work, and it was bad UX.
- InfoMessage: add an option show_delay.
- MovableContainer: avoid possible crash when
not yet painted.
- ReaderDictionary: use show_delay=0.5 instead of
scheduleIn(0.5n...) (a5b133da) as we need the
InfoWidget to be known to UIManager to catch tap
and allow interrupting lookups properly.
- ReaderDictionary: rework handling of no_refresh_on_close
(6162c287) with proper regions comparisons
* Modernize jit syntax
It's built-in, no need for a require anymore.
* Flag Android should_restrict_JIT again
It's mildly helpful at putting off the inevitable.
(very, very, very, very mildly).
* Bump android-luajit-launcher
https://github.com/koreader/android-luajit-launcher/pull/281
* Don't paint invisible background-colored rounded corners
Made obvious when testing #7042
* Only enforce a highlight radius on buttons that don't already set a
custom one ;).
(Mostly, square buttons with a 0 radius ^^).
ffi/blitbuffer already handles radius being nil, which suits us just fine
:)
* Implement proper alpha-blending of SVG icons
Also, instead of doing that every time, cache a pre-composited version
that matches the screen's BB type.
This is faster, and also has the advantage of making icon highlights
behave.
Jot down a few notes about corner-cases or future improvements, e.g.,
dimming icons on non-white backgrounds, and nightmode with color icons.
- Add IconWidget, use it for icons instead of ImageWidget.
Specify icons by name only, look for them (with either
.svg or .png suffixes) in multiple directories (including
koreader/settings/icons/ to allow customizing them).
Don't crash when icon name not found, shown a black
background warning icon instead.
- Don't trust the icons' native sizes: replace
scale_for_dpi=true with width/height=DGENERIC_ICON_SIZE,
so all icons get the same (tunable) size - except in
a few specific use cases.
- Top and bottom menu bars: normalize, and have icons
properly centered in them, extend vertical line
separators up to the edges.
- TOC: adjust expand/collapse icons size to items size
* stride is now a size_t
On some platforms, that's 64 bits, which means it's no longer
automatically converted to a Lua number to avoid precision loss.
Do that ourselves, because lua-serialize doesn't know how to handle an
uint64_t cdata ;).
* ReaderFooter:
* Honor the global twelve_hour_clock setting, instead of
duplicating a local one.
(Re #6969)
* os.date is a thin wrapper around strftime, so we might be able to get
away with some not-quite-standard extensions...
These are *definitely* supported on Linux, but are *NOT* the glibc
extension (that'd be e.g., %-I), so, hopefully, they're somewhat
portable...
They are also supported on BSD/macOS.
They are *not* supported by the MS UCRT. That means MinGW-w64, too.
This *appears* to be supported on current Bionic (it might even support
said glibc format altering extensions).
* And of course, Windows is terrible, so, make this terribly ugly to not
break it there...
* Turns out BSD also supports the dash trim format extension, so, leave
the trimming to the libc, and handle the special-casing in a way that
doesn't create stupid locals.
* Random unrelated cleanup ^^.
(https://gitter.im/koreader/koreader?at=5fd24be492aa1c4ef5d11f31)
* Update the testsuite
(Because the default used to be 24h clock).
Changed the default to 24h clock ;p.
* Explain why we don't try to fix it in Lua
Avoid crash with RTL UI after options we moved.
Swap Zoom direction items when RTL UI.
Also don't check show_func when sizing the names
on the bottom menu, to avoid icons moving or
resizing when toggling options.
* ReaderDictionary: Don't refresh when dimissing the lookup info
InfoMessage
Re #6932
* Fix dict_largewindow in Landscape
Have to leave some room for the UI chrome
* Top menu & bottom menu tapzones are now full-width, thanks to the now sane override system.
* A separate, extra tapzone was also created for each of them to provide a taller, but narrower tapzone extension (one that doesn't clash with the prev/next tapzones).
* The footer tapzone was made much taller.
Change the text in the button from a hypen (-) to a
Unicode minus size (−, U+2212). This is the same width
as the + sign.
The NaturalLightWidget and FrontLightWidget controls
already use minus signs in this way.
- Move zoom options from top menu to bottom config
- Add option to manually define zoom (relative to
page width) and overlap (in percent)
- Add options to zoom to columns or rows, possibly
with overlap. Add panning direction options when
page forward in these modes
By essentially dropping the whole XHTML block, instead of trying to salvage each and every tag one by one as we did before.
Also, as that's usually the result after broken parsing, handle nil URLs slightly better in the frontend, so that they get caught/reported properly instead of doing nothing and/or crashing half the time.
Add option to hide (skip) non-linear fragments, only working
in 1-page mode. Tweaks mostly to footer, toc and skim code
to make it clear(er) which pages belong to linear or non-linear
fragments.
2 new widgets:
- QRWidget, that's like an ImageWidget, but with a text property that will be converted to a QR code ;
- QRMessage, that's like an InfoMessage, but shows the message as QR code.
Moreover, it adds the ability to export QR codes to the text editor.
1 new plugin:
- Generate QR codes from clipboard
Changes to text editor plugin:
- Add the ability to export QR codes.
Follow up to b90f6db8: allow specifying an other
value for tap interval when the keyboard is shown
(a good value for tap interval on reader and UI
elements might be too long on the keyboard, and
prevent typing fast).
* Update the data collection format & handler to make it much less tortuous
* Update the pagecount & resync the stats on document layout changes
* Update the database schema to allow doing most queries against a SQL view that rescales the collected data to be accurate regardless of document layout (thanks to @marek-g for the SQL magic ;)).
* Add a "reset stats for current book" entry in the list of reset options, one that won't horribly break stats in said book ;).
* Fixed a couple of resource (SQL connection) leaks (in ReaderStatistics:getCurrentBookStats & ReaderStatistics:getCurrentBookStats).
* Flush stats to the DB on periodical metadata saves.
* Minor cosmetic tweaks to the code
Previously items weren't actually moved, but swapped with the item
at their new position. That works well if you move an item for one position.
However, if you move an item over several positions, you won't get the
expected behaivor.
And to make it the screensaver image.
Done on two-finger large diagonal tap on multitouch
devices (like regular ScreenShoter) as long-diagonal
swipe is reserved for panning.
Fallback to tap in the bottom left corner on
non-multitouch devices.
In the "Set footnote popup font size", allow toggling
between setting a relative (to the document) font size
and setting an absolute font size (that won't change
with the document font size).
Since 8815cbe0 and getSafeFilename() taking additional
parameters, and :gsub() returning multiple values,
filesystem type wasn't really checked and replacements
were not ensured, so saving articles like "Portal:Stuff"
failed on VFAT devices as ':' wasn't replaced.
Only with CreDocuments (as no way currently to highlight links
in PDFs).
Tab or Shift-Tab to select next or previous links.
Press to follow (or show footnote in popup, and in there Press
to follow), back to go back.
* Revamped most actions that require an internet connection to a new/fixed backend that allows forwarding the initial action and running it automatically once connected. (i.e., it'll allow you to set "Action when Wi-Fi is off" to "turn_on", and whatch stuff connect and do what you wanted automatically without having to re-click anywhere instead of showing you a Wi-Fi prompt and then not doing anything without any other feedback).
* Speaking of, fixed the "turn_on" beforeWifi action to, well, actually work. It's no longer marked as experimental.
* Consistently use "Wi-Fi" everywhere.
* On Kobo/Cervantes/Sony, implemented a "Kill Wi-Fi connection when inactive" system that will automatically disconnect from Wi-Fi after sustained *network* inactivity (i.e., you can keep reading, it'll eventually turn off on its own). This should be smart and flexible enough not to murder Wi-Fi while you need it, while still not keeping it uselessly on and murdering your battery.
(i.e., enable that + turn Wi-Fi on when off and enjoy never having to bother about Wi-Fi ever again).
* Made sending `NetworkConnected` / `NetworkDisconnected` events consistent (they were only being sent... sometimes, which made relying on 'em somewhat problematic).
* restoreWifiAsync is now only run when really needed (i.e., we no longer stomp on an existing working connection just for the hell of it).
* We no longer attempt to kill a bogus non-existent Wi-Fi connection when going to suspend, we only do it when it's actually needed.
* Every method of enabling Wi-Fi will now properly tear down Wi-Fi on failure, instead of leaving it in an undefined state.
* Fixed an issue in the fancy crash screen on Kobo/reMarkable that could sometime lead to the log excerpt being missing.
* Worked-around a number of sneaky issues related to low-level Wi-Fi/DHCP/DNS handling on Kobo (see the lengthy comments [below](https://github.com/koreader/koreader/pull/6424#issuecomment-663881059) for details). Fix#6421
Incidentally, this should also fix the inconsistencies experienced re: Wi-Fi behavior in Nickel when toggling between KOReader and Nickel (use NM/KFMon, and run a current FW for best results).
* For developers, this involves various cleanups around NetworkMgr and NetworkListener. Documentation is in-line, above the concerned functions.
Witnessed with "L/R Margins": tapping on a button
sets the value to the preset table, by reference.
Tapping the -/+ fine tuning buttons was updating
these tables in-place, in effect modifying the presets.
Avoid conflicts having "In-page EPUB footnotes (smaller)"
affects FB2 documents that use "<a type=note>12</a>" which
would then get smaller if both tweaks are enabled (which
they are, by default).
Also switch "-cr-hint: strut-confined" from being set on "*"
to being set only on "body", now that it is inherited.
Footnote popups: add styles for some non-HTML FB2 tags,
so MuPDF can render them as expected.
* Fix HW dithered partial refreshes sometimes behaving as if the refreshed
content had moved a few pixels to the side...
Probably a kernel issue with the alignment fixup in the EPDC?
* Get rid of the legacy coordinates fixup
It shouldn't be necessary anymore.
And I'd rather fix the root cause, anyway.
* Bump base
(https://github.com/koreader/koreader-base/pull/1116)
* Missed a few DIVs in #6224
dofile() wasn't enough to copy en_keyboard, as the references
to key popups would still be shared, and hacks to them (as
done by the FR keyboard) would be active on the EN keyboard.
Also, for the FR Keyboard:
- bring M key popup too when moving it to 2nd row.
- keep original ',' and '.' as on EN keyboard.
- add ';' instead of ',' as the added key, and let it have
some key popup too, with keys helpful when CSS editing.
Allows editing a CSS snippet to be applied to this
book only, without the need to create and edit
a User style tweak.
Allows copying any other tweak CSS by just taping
on it (and pasting into this with Hold).
Limit User style tweaks nb of items per menu page
to 6 (like we try to do for other tweaks menus).
This is a quick exploration into how the new Device:hasFewKeys() method could work to make things more usable on very limited devices.
In the reader, the right is repurposed to open the menu. Left in turn closes it.
The same principle is applied to ButtonDialog. This means you can select anything in principle, but once you go right you can't go back.
References <https://github.com/koreader/koreader/issues/4029>.
- Fix wrong values for books opened (or first opened)
from April 14th to May 20th: highlights and notes
possibly being NULL was preventing nb of pages and
last_open from being fetched.
- Re-order current book and all books stat items to some
hopefully more sensible order.
- Some rewording for clarity.
KeyValuePage:
- Have value_overflow_align="right" only align right
when value overflows 1/2 screen width, but not
when only key overflows that.
- Show truncated text also on Tap when there is no
callback.
Using DoubleSpinWidget.
Also keep SpinWidgets open on Apply.
Added little trick: if widget has been moved, close
bottom config menu on next Apply to show more of
the book.
- Use same names for options;
- Have them both movable
- Add option to keep widget shown on Apply (and use that
when appropriate: when the value may have an immediate
visual effect, so one can tweak it without having to
go thru menus to re-open it again).
Mostly for the PDF bottom menu.
- Reorganize by topic, trying to limit the number
of widgets per panel to 4.
- Re-order some toggles from low to high ('off' then 'on').
- Show font size as number instead of a list of "Aa".
- PDF: add more font size values, and increase usable
contrast values.
- Add help_text to most PDF toggle titles.
- CRE line spacing: increase fine tuning min and max.
Also avoid zoom advice messages on book load.
- Add some style tweaks to allow displaying FB2 end notes
in-page too - and to allow showing them without a smaller
font size.
- Show footnote number in bold in popup footnotes.
- FB2 footnotes are no more rendered in-page by default
- In-page rendering can be enable by the added Style tweak
- FB2 footnotes can also show in footnote popup (with
some added not-so-nice CSS so MuPDF can render them
as crengine)
Just like what's been done previously for InfoMessage.
Also tweak 'other_buttons' option (not yet used anywhere)
to allow multiple rows of such other buttons.
Don't display a tofu glyph when meeting a tab (none of
our fonts have a glyph for it).
New parameter: TextBoxWidget.tabstop_nb_space_width,
that defaults to 8, to ensure tabstops in the usual
left aligmnent (or right when para is RTL).
Also adds options to remove statistics for books
with low reading duration (to clean up stats for
books just quickly browsed and not yet read).
Also adds TextWidget:getFontSizeToFitHeight()
even if we ended up not using it.
The default left margin on blockquote and dd is `40px`, but unfortunately that doesn't scale. rem is calculated using a hardcoded16px, so em or % is the best compromise in this case.
PS If we assume 1em = 16px then 40px is actually 2.5em, not 1em. This reduction in indentation is mainly intended for the benefit of smaller E Ink devices.
Closes <https://github.com/koreader/koreader/issues/5859>.
OPDS catalogs may have search query capabilities. It is very usefull to find a
book in huge catalog, even when they are organized as directories. This commit
provides the possibility to add a %s mark in an OPS catalog URL, that would
trigger a search box when browsing the OPDS in koreader.
* File search: Don't traverse hidden folders if we're not showing them
Re https://www.mobileread.com/forums/showpost.php?p=3949194&postcount=21
* Ignore macOS resource forks, too.
* Apply the same logic to the BookInfo directory walker
* And never ever show resource forks in the FM, either.
It's extremely confusing, as it has nothing to do with calibre catalogs,
which are actual things the user can generate manually.
What it's using instead is actually a metadata cache in a flatfile db
that's always present, as long as "Send To Device" was used to upload
the content to the device.
* Allow running Shell/Python scripts from the FM
* Show an InfoMessage before/after running the script
Since we're blocking the UI ;).
* Allow running scripts from the favorites menu, too.
MuPDF does not handle "text-align: justify" correctly on
RTL text: the last line is left-aligned, but it should be
right-aligned.
Not using justify makes it correctly right align the whole
text.
Gives the book language to Text*Widget (and XText) when
drawing title, authors and other metadata text.
Might be needed to properly display a Japanese book title
when the UI language is Chinese.
bidi.lua:
- Revert "Alias everything to Bidi.nowrap() when in LTR UI,
as using LTR isolates seems uneeded when already LTR" (part
of a628714f) which was a wrong assumption: we need proper
wrappers for all things paths. Enhance some of these wrappers.
- Fix GetText RTL wrapping which was losing empty lines and
trailing \n.
- Wrap all paths, directories, filenames in the code with
these wrappers.
- Wrap all book metadata (title, authors...) with BD.auto(),
as it helps fixing some edge cases (like open/close quotation
marks which are not considered as bracket types by FriBiDi).
(Needed some minor logic changes in CoverBrowser.)
- Tweak hyphenation menu text
- Update forgotten SortWidget for UI mirroring
- KoptConfig: update "justification" index for RTL re-ordering,
following the recent addition of the page_gap_height option.
Ellipsis was sometimes not displayed when text is right aligned,
because width was not updated with ellipsis size.
bump base/xtext: fix truncation ellipsis position in bidi text
so it stays nearer to previous logical order char, instead of
sometimes being thrown away to start or end of line.
- Alias everything to Bidi.nowrap() when in LTR UI, as using
LTR isolates seems uneeded when already LTR.
- Better wrapping of RTL filename by using auto direction and
LTR-isolating only the suffix so it's always on a side.
- menu.lua: handle bidi_wrap_func outside getMenuText(), which
may be used in other contexts.
- Add BD.filepath() and BD.dirpath()
- bump crengine: (Upstream) DocX: fix paragraphs with single hyperlink
- bump fribidi to 1.0.8 (for nested isolates fix)
- xtext.makeLine(): return no_allowed_break_met=true when that
happens, so we know the line breaks inside a word.
TextBoxWidget: add forgotten property (when use_xtext=true) when no
line break opportunity was found: has_split_inside_word=true.
(Only used by CoverBrowser Mosaic mode to make nicer text covers
by reducing font size when that happens.)
A few fixes and enhancement related to bold text:
- When using bold=true with a regular font, use its bold
variant if one exists (can be prevented by manually
adding a setting: "use_bold_font_for_bold" = false).
- When using a bold font without bold=true, promote bold
to true, so fallback fonts are drawn bold too.
- Whether using a bold font, or using bold=true, ensure
fallback fonts are drawn bold, with their available bold
variant if one exists, or with synthetized bold.
- When using a bold variant of a fallback font, keep using
the regular variant as another fallback (as bold fonts
may contain less glyphs than their regular counterpart).
- Allow providing bold=Font.FORCE_SYNTHETIZED_BOLD to
get synth bold even when a bold font exists (might be
interesting to get text in bold the same width as the
same text non-bold).
- Use the font realname in the key when caching glyphs,
instead of our aliases (cfont, infont...) to avoid
duplication and wasting memory.
Small tweaks all around to handle UI mirroring:
- swap existing symbols like arrows, or use alternative ones
- rotate some images, like chevrons and dogear icons
- flip some left and right swipe handling
- flip some geometry arithmetic like tap on left or right
side of page or dict window
- use new ProgressWidget:getPercentageFromPosition() instead
of geometry arithmetic
- BD.wrap() some concatenated string bits, like in reader
and menu footers
- flip inverse_reading_order when UI is mirrored
More specific tweaks:
- ReaderGesture: reset some specific gestures when UI direction
has changed (tap on top/bottom left/right corners, for
bookmarks and FileManager "Plus menu").
- ReaderRolling: show markers on the correct side of page,
in single or dual page mode.
- KoptOptions: swap left and right icons in Alignment toggle
- CheckMark: proper rendering in all 4 mirroring/rtl combinations.
- VirtualKeyboard: forbid any mirroring
- Move util.getMenuText into Menu.lua
Allow TextBoxWidget new text direction/lang parameters to be
set on upper widgets, and propagate them all the way to it
(ScrollTextWidget, InputText, InputDialog, TextViewer).
Use specific non-default ones in some specific cases:
- Force LTR text direction when showing HTML and CSS, and
configuration files (in some plugins).
- Use Wikipedia server language and text direction when
showing an article.
- Use auto with Dictionary results, as we don't know the
dictionary language, and they may contain mixed content.
- Force LTR when showing some paths (still needs more of them)
TextEditor plugin: add 2 new options "Auto paragraph direction"
and "Force paragraph direction LTR".
Footnotes popup: grab HTML direction, and forward it
to MuPDF for proper display.
Use some HorizontalSpan for padding between key and value,
instead of prepending a space to the value text (which
won't work as expected if value text is RTL, as it would
be put on the right side of screen).
This adds a new separate Romanian keyboard layout, with popup support.
- Functional buttons are translated.
- Pages 5&6 contain 3 groups of characters (I tried my best to group them logically):
- On the left: traditional Romanian cyrillic pre-1850s
- On the middle latinised forms from 1850s onwards
- On the right modern diacritics from 1900s to today
- Pages 7&8 add only large double quotes and section/paragraph mark.
- Popups are only avalable for most common diacritics. Swipe up for circumflex, swipe down for breve.
I can really call this the most complete though-the-ages Romanian keyboard. :)
The japanese keyboard being taller than the others, when
switching to/from it from/to another layout:
- re-init InputDialog for proper sizing and positionning
- refresh the whole screen, to remove any trace of
a previous taller keyboard
Also add calls to :free() here and there to free keyboard
keys' TextWidgets' XText C objects without waiting for GC.
The korean keyboard wraps InputText and overrides some
of its methods to process input in some specific way.
When switching to another keyboard layout, the original
methods need to be restored.