when the image (e.g. a PNG) does contain an alpha channel, that can
be honored by ImageWidget. It doesn't do so by default for compatibility
(arguably, we should change that in the future), it has to be enabled
by setting the "alpha" property to "true" (boolean, not string).
external data (and in bad cases our own) can contain invalid byte
sequences in UTF8 strings. A prominent example are file names.
There was a 1-off bug in calculating the allowed length for multibyte
chars, and the iterator was a bit too greedy when stumbling upon
invalid sequences, returning a single "invalid" char for a sequence
up to the point where it became invalid in calculation. Now, we present
one invalid char for the first byte of that sequence and then check
for a valid char starting with the next byte.
This is the remaining gruntwork of #1276. I believe that only leaves networkmgr.lua and filemanagersearch.lua, which will require a little more thought.
our network manager script isn't the beauty of the code base.
However, this fixes a case where it would crash the reader when an
external command fails.
fixes#1279.
the height of filechooser is provided when creating filechooser
widget since there may be no title as in filemanger which needs
a special title widget to contain filemanger menu.
Lots of the device-related distinction wandered into
base/ffi/framebuffer_<driver>. This eases the refresh logic in
UI manager, which basically only decides what kind of refresh
to trigger. The device specific configuration in the framebuffer
driver decides how to realize that whish.
screen.lua is gone, in its place is now the framebuffer driver.
The device abstraction decides what framebuffer driver to load.
While looking into #1219 I accidentally ended up refactoring some stuff.
Tested in emulator and on H2O, but be wary because I might have overlooked something.
Don't increase counter for regional updates
Also some workarounds for Kobos
Try to avoid update_regions_func poisoning
Reset it at the end of repaint() even if nothing was found dirty
Ensure regional updates are always PARTIAL, in
case we get a region attached to an automatically triggered refresh, not
marked force_partial [which, hey, shouldn't happen, but apparently does
sometimes ^^]
This will convert any file name to lowercase before doing the comparison.
Note that this will only work for ASCII character range, a full Unicode
aware solution will be much more complicated. And in the end, file names
are byte arrays, not character strings ;-)
fixes#1183.
The strcoll() workaround we had in place for Kobo devices was (or has
become) ineffective. We had set self.strcoll to nil on Kobo devices -
but this was the instance variable. Setting it to nil effectively makes
the instance variable vanish, so when trying to access it later, it
was not there and got looked up via the metatable - which had the original
reference. Setting it to nil had no effect whatsoever.
We simplify that approach and set the replacement function where before we
had set this to nil.
This is a partial fix for issue #1183 (and explains a comment in issue #686
which says that the old fix did not work).
However, to really fix#1183 - if we want to do so - we would need a collate
function that normalizes uppercase/lowercase before compare.
Since commit 12a76fee33, we had a potential
bug on the event mechanism:
It introduced (besides the checkTasks method itself) a second run of the
checkTasks() method. In the second run, however, scheduled events were
not taken into consideration in how long to wait for input events
afterwards.
So when the after the first run of checkTasks() there were new scheduled
tasks added to the task queue, they were not properly scheduled and
and depended on an already existing scheduled event or an input event
to trigger.
This might have led to unexpected order of execution (though the order
is not guaranteed by the task scheduling anyway!) or to events triggering
not at all until the next input event.
And koreader release version is normalized to a 10 digits containing
a four digits year field followed by a two digits month field followed
by a four digits revision field like "2014041079".
re #1119
AUTO appears to be doing the right thing...
(even if that baffles me, given the state of the Kernel sources,
unless they flip some switches at compile time
[NTX_WFM_MODE_OPTIMIZED_REAGL / NO_AUTO_REAGL_MODE] ...)
Anyway, that's what nickel does, so follow its lead ;).
and remove the wifi toggler on the footer of each menu page,
so that network status is only checked (currently with the stdout of ip cmd)
when navigating to the "Network settings" submenu instead of checking
on each menu popup.
Don't hijack forced partial updates (i.e., from UI elements) on always
FULL REAGL devices. It doesn't implode if we don't, and it makes for a
snappier UI.
WIP, untested, can probably simplified some more.
Good news is, it should be smarter, and thus provide a smoother user
experience :).
Relies on the relevant changes in base.
We wouldn't want those to become full updates ;).
Also apply an optionally different waveform mode for such partial,
regional updates (right now, only Kindle devices make use of this finer
grained control).
which currently just sets free the limitation of panning gestures
emitting rate. This should fix#1039 when unchecking the
"E-ink optimization" in the "Screen settings".
This is a major overhaul of the hardware abstraction layer.
A few notes:
General platform distinction happens in
frontend/device.lua
which will delegate everything else to
frontend/device/<platform_name>/device.lua
which should extend
frontend/device/generic/device.lua
Screen handling is implemented in
frontend/device/screen.lua
which includes the *functionality* to support device specifics.
Actually setting up the device specific functionality, however,
is done in the device specific setup code in the relevant
device.lua file.
The same goes for input handling.
ConfirmBox and InfoMessage are default to be modal.
Now returning to filamanager after highlighting a PDF page
the confirmbox asking users to save the document will not be hidden by
the filamanager window.
And it's tested on Kindle that #791 is already been solved probably by
out refacorting of MuPDF backend.
And also fix a touchmenu bug that prevent some menu entries
(always at the bottom of the menu) from showing submenus. The reason is
that the onTapSelect method of TouchMenuItem doesn't return true, so that
the tap gesture will propagate to the parent widget and be captured by
touchmenu itself. But at this time the dimen of touchmenu is changed to
the submenu of the tapped menuitem. If the submenu is short enough the
tap will be outside of touchmenu which will cause a TapCloseAllMenus
event and the submenu will never be shown.
colors were a mixture of 4bpp integers (0=white, 15=black) and
fractional blackness levels (0=white, 1.0=black) before. This is
now unified to use the color specification of the Blitbuffer API.
The #1011 bug is caused by the `contains` check of link box with
visible area. When the link is at the very right (left?) of
the page, enlarged link box often exceeds the page bound rendering
the mentioned `contains` check failed. This patch uses an `intersectWith`
test to check if the link is in current page.
This will use the new API where the Lua/C interface was used before
and also drop usage of mupdfimg wrapper which is now implemented
within the mupdf interface
rendertext.lua did use addblitFrom() for rendering text - i.e. blitting
the letters to a BlitBuffer. However, it used intensity=1.0, which is
the same as doing a (faster, more efficient) blitFrom(). So use that
instead.
What was probably intented here is a different kind of blitting - using
the bitbuffer of the glyph as a mask.
This plugin implements a simple Calibre Companion protocol that
communicates with Calibre Wireless Server from which users can
send documents to Koreader devices directly with WIFI connection.
Note that Calibre Companion(CC) is a trade mark held by MultiPie Ltd.
The Android app Calibre Companion provided by MultiPie is closed-source.
This plugin only implements a subset function of CC according to the
open-source smart device driver from Calibre source tree.
More details can be found at calibre/devices/smart_device_app/driver.py.
This should close#856.
Although still closed I will check this one back with someone from the German forum, I hope this also closes#822, but there might be still some problems with the light-bug introduced in Kobo's firmware 3.5. But since 822 is already in the state closed we can leave things as they are for now and I will reopen 822 if necessary.
Epub only.
If someone knows how to get an jpg/png from a pdf on linux (e.g. convert by imangemagick? But i am not a linux specialist and have no idea how to get that one into koreader) I can add something for linux too.
cbz/cbr should be possible too, but I have not looked into it yet.
Do I see it right that the Kindle screensavers are handled by Kindle itself?
But on Kindle you also profit, you can see picture thumbnails now in the search results (long tap on found book)
Since wikipedia server is language specific we should first detect
language of the text by querying Google Translate. Make sure you have
access to both Google Translate and Wikipedia service to use this
function.
As well as the width of the toc notches
Lower the default value of the container size a bit to avoid eating into
the last line on small borders setup (I checked on 167 & 212 DPI
devices, Feel free to revert to the previous value (19) if that causes
trouble).
