Much easier to deal with thanks to the cleanup work done in #10062 ;).
* `carrier` is set to 1 as soon as the device is *administratively* up (in practice, as soon as we run `ifconfig up`). This is perfectly fine for `isWifiOn`, but absolutely not for `isConnected`, because we are not, actually, connected to *anything*, no attempt at associating has even been made at that point. Besides being semantically wrong, in practice, this will horribly break the connectivity check, because it expects that `isConnected` means we can talk to at least the LAN.
* Delving into the Linux docs reveals that `operstate` looks like a better candidate, as it reflects *operational status*; for Wi-Fi, that means associated and successfully authenticated. That's... closer, but still not it, because we still don't have an IP, so we technically can't talk to anything other than the AP.
* So, I've brought out the big guns (`getifaddrs`), and replicated a bit of code that I already use in the USBNetwork hack on Kindle, to detect whether we actually have an IP assigned. (Other approaches, like `/proc/net/route`, may not be entirely fool-proof, and/or get complicated when IPv6 enters the fray (which it does, on Kobo, Mk. 8+ devices are IPv6-enabled)).
TL;DR: Bunch of C via ffi, and `isConnected` now returns true only when the device is operationally up *and* we have an IP assigned.
Pulls in https://github.com/koreader/koreader-base/pull/1579 & https://github.com/koreader/lj-wpaclient/pull/10
cervantes kindle kobo remarkable: use sysfs carrier file to determine connection state
cleanup hasWifiManager checks
gateway check: use ip if available
Fixes: #10087Closes: #10092
* Get rid of the `canToggleGSensor` Device cap, it's now mandatory for `hasGSensor` devices. (This means Kindles can now toggle the gyro, fix#9136).
* This also means that `Device:toggleGSensor` is now implemented by `Generic`.
* Update the Screen & Gyro rotation constants to be clearer (c.f., https://github.com/koreader/koreader-base/pull/1568) (/!\ This might conceivably break some `rotation_map` user-patches).
* Input: Move the platform-specific gyro handling to Device implementations, and let Input only handle a single, custom protocol (`EV_MSC:MSC_GYRO`).
* Input: Refine the `rotation_map` disable method implemented in 43b021d37c. Instead of directly poking at the internal field, use a new method, `disableRotationMap` (/!\ Again, this might break some `rotation_map` user-patches).
* Input: Minor tweaks to event adjust hooks to make them more modular, allowing the Kobo implementation to build and use a single composite hook. API compatibility maintained with wrappers.
Basically:
* Use `extend` for class definitions
* Use `new` for object instantiations
That includes some minor code cleanups along the way:
* Updated `Widget`'s docs to make the semantics clearer.
* Removed `should_restrict_JIT` (it's been dead code since https://github.com/koreader/android-luajit-launcher/pull/283)
* Minor refactoring of LuaSettings/LuaData/LuaDefaults/DocSettings to behave (mostly, they are instantiated via `open` instead of `new`) like everything else and handle inheritance properly (i.e., DocSettings is now a proper LuaSettings subclass).
* Default to `WidgetContainer` instead of `InputContainer` for stuff that doesn't actually setup key/gesture events.
* Ditto for explicit `*Listener` only classes, make sure they're based on `EventListener` instead of something uselessly fancier.
* Unless absolutely necessary, do not store references in class objects, ever; only values. Instead, always store references in instances, to avoid both sneaky inheritance issues, and sneaky GC pinning of stale references.
* ReaderUI: Fix one such issue with its `active_widgets` array, with critical implications, as it essentially pinned *all* of ReaderUI's modules, including their reference to the `Document` instance (i.e., that was a big-ass leak).
* Terminal: Make sure the shell is killed on plugin teardown.
* InputText: Fix Home/End/Del physical keys to behave sensibly.
* InputContainer/WidgetContainer: If necessary, compute self.dimen at paintTo time (previously, only InputContainers did, which might have had something to do with random widgets unconcerned about input using it as a baseclass instead of WidgetContainer...).
* OverlapGroup: Compute self.dimen at *init* time, because for some reason it needs to do that, but do it directly in OverlapGroup instead of going through a weird WidgetContainer method that it was the sole user of.
* ReaderCropping: Under no circumstances should a Document instance member (here, self.bbox) risk being `nil`ed!
* Kobo: Minor code cleanups.
* UIManager: Support more specialized update modes for corner-cases:
* A2, which we'll use for the VirtualKeyboards keys (they'd... inadvertently switched to UI with the highlight refactor).
* NO_MERGE variants of ui & partial (for sunxi). Use `[ui]` in ReaderHighlight's popup, because of a Sage kernel bug that could otherwise make it translucent, sometimes completely so (*sigh*).
* UIManager: Assorted code cleanups & simplifications.
* Logger & dbg: Unify logging style, and code cleanups.
* SDL: Unbreak suspend/resume outside of the emulator (fix#9567).
* NetworkMgr: Cache the network status, and allow it to be queried. (Used by AutoSuspend to avoid repeatedly poking the system when computing the standby schedule delay).
* OneTimeMigration: Don't forget about `NETWORK_PROXY` & `STARDICT_DATA_DIR` when migrating `defaults.persistent.lua` (fix#9573)
* WakeupMgr: Workaround an apparent limitation of the RTC found on i.MX5 Kobo devices, where setting a wakealarm further than UINT16_MAX seconds in the future would apparently overflow and wraparound... (fix#8039, many thanks to @yfede for the extensive deep-dive and for actually accurately pinpointing the issue!).
* Kobo: Handle standby transitions at full CPU clock speeds, in order to limit the latency hit.
* UIManager: Properly quit on reboot & exit. This ensures our exit code is preserved, as we exit on our own terms (instead of being killed by the init system). This is important on platforms where exit codes are semantically meaningful (e.g., Kobo).
* UIManager: Speaking of reboot & exit, make sure the Screensaver shows in all circumstances (e.g., autoshutdown, re: #9542)), and that there aren't any extraneous refreshes triggered. (Additionally, fix a minor regression since #9448 about tracking this very transient state on Kobo & Cervantes).
* Kindle: ID the upcoming Scribe.
* Bump base (https://github.com/koreader/koreader-base/pull/1524)
* Kobo: Switch ST devices to a dedicated input handler
Instead of shoehorning a hack into the standard handler.
* Use setCurrentMtSlotChecked in handleTouchEvLegacy
* AutoSuspend: Use the canSuspend devcap check instead of reinventing the wheel.
* Device & UIManager: Cleanup canSuspend devcap check related stuff to avoid boilerplate code.
(It also now defaults to no, and is explicitly set by device implementations where supported).
* AutoSuspend: Re-engage suspend/shutdown timers when fully charged.
This restores the existing behavior pre #9036
(c.f., https://github.com/koreader/koreader/pull/9258#issuecomment-1167672356)
* SDL: Unbreak the fake suspend behavior so that it actually works.
Tweak the default screensaver message to remind users that Power is bound to F2.
(Fix#9262)
* AutoSuspend: Re-engage suspend/shutdown timers on unplug.
This matters on Kobo, because the unexpected wakeup guard might have stopped the suspend timer.
The change from timeval to time completely broke reMarkable.
frontend/device/remarkable/device.lua was using TimeVal:now() to manually overwrite event time values, as noted in the code comments.
Input:handleTouchEv is expecting those event time values to be timevals, not integer times.
So as soon as the user touches the screen, crash.
* Ignore hardware sleep button
When running KOReader with a launcher, having the power button trigger the Power event conflicts with the launcher's built-in screensaver (see https://github.com/koreader/koreader/issues/8891). This commit ignores the hardware power button in KOReader and lets the launcher handle sleep and wake normally.
* Disable autosuspend
If a launcher is active, there will be no way to un-suspend because the power button is ignored by KOReader and handled by the launcher.
* Ignore power button only if Oxide is running
Same with disabling auto suspend
The Wacom pen reports sane CLOCK_REALTIME timestamps, but the Touchscreen reports timestamps frozen at the boot time ts (in REALTIME) :s.
So, make everyone use synthetic CLOCK_MONOTONIC timestamps in order to make gesture detection behave.
* ReaderDictionary: Port delay computations to TimeVal
* ReaderHighlight: Port delay computations to TimeVal
* ReaderView: Port delay computations to TimeVal
* Android: Reset gesture detection state on APP_CMD_TERM_WINDOW.
This prevents potentially being stuck in bogus gesture states when switching apps.
* GestureDetector:
* Port delay computations to TimeVal
* Fixed delay computations to handle time warps (large and negative deltas).
* Simplified timed callback handling to invalidate timers much earlier, preventing accumulating useless timers that no longer have any chance of ever detecting a gesture.
* Fixed state clearing to handle the actual effective slots, instead of hard-coding slot 0 & slot 1.
* Simplified timed callback handling in general, and added support for a timerfd backend for better performance and accuracy.
* The improved timed callback handling allows us to detect and honor (as much as possible) the three possible clock sources usable by Linux evdev events.
The only case where synthetic timestamps are used (and that only to handle timed callbacks) is limited to non-timerfd platforms where input events use
a clock source that is *NOT* MONOTONIC.
AFAICT, that's pretty much... PocketBook, and that's it?
* Input:
* Use the <linux/input.h> FFI module instead of re-declaring every constant
* Fixed (verbose) debug logging of input events to actually translate said constants properly.
* Completely reset gesture detection state on suspend. This should prevent bogus gesture detection on resume.
* Refactored the waitEvent loop to make it easier to comprehend (hopefully) and much more efficient.
Of specific note, it no longer does a crazy select spam every 100µs, instead computing and relying on sane timeouts,
as afforded by switching the UI event/input loop to the MONOTONIC time base, and the refactored timed callbacks in GestureDetector.
* reMarkable: Stopped enforcing synthetic timestamps on input events, as it should no longer be necessary.
* TimeVal:
* Refactored and simplified, especially as far as metamethods are concerned (based on <bsd/sys/time.h>).
* Added a host of new methods to query the various POSIX clock sources, and made :now default to MONOTONIC.
* Removed the debug guard in __sub, as time going backwards can be a perfectly normal occurrence.
* New methods:
* Clock sources: :realtime, :monotonic, :monotonic_coarse, :realtime_coarse, :boottime
* Utility: :tonumber, :tousecs, :tomsecs, :fromnumber, :isPositive, :isZero
* UIManager:
* Ported event loop & scheduling to TimeVal, and switched to the MONOTONIC time base.
This ensures reliable and consistent scheduling, as time is ensured never to go backwards.
* Added a :getTime() method, that returns a cached TimeVal:now(), updated at the top of every UI frame.
It's used throughout the codebase to cadge a syscall in circumstances where we are guaranteed that a syscall would return a mostly identical value,
because very few time has passed.
The only code left that does live syscalls does it because it's actually necessary for accuracy,
and the only code left that does that in a REALTIME time base is code that *actually* deals with calendar time (e.g., Statistics).
* DictQuickLookup: Port delay computations to TimeVal
* FootNoteWidget: Port delay computations to TimeVal
* HTMLBoxWidget: Port delay computations to TimeVal
* Notification: Port delay computations to TimeVal
* TextBoxWidget: Port delay computations to TimeVal
* AutoSuspend: Port to TimeVal
* AutoTurn:
* Fix it so that settings are actually honored.
* Port to TimeVal
* BackgroundRunner: Port to TimeVal
* Calibre: Port benchmarking code to TimeVal
* BookInfoManager: Removed unnecessary yield in the metadata extraction subprocess now that subprocesses get scheduled properly.
* All in all, these changes reduced the CPU cost of a single tap by a factor of ten (!), and got rid of an insane amount of weird poll/wakeup cycles that must have been hell on CPU schedulers and batteries..
* Enable AutoSuspend plugin on rM
Fix#6769
Re: #6028
* Use the PowerEvent handler on rM
It makes much more sense than the fire & forget & hope for the best
approach copied from the Kindle platform, because we *are* controlling
suspend ourselves (mostly), unlike on Kindle ;).
Fix#6676
* Enable HW inversion on the rM
I mean, we kinda forgot to ever test that, but I don't really see why it
wouldn't work ;).
* generic Device:info() function which returns the model
* add Device:canSuspend() and make it true in all devices that have suspend routines and the emulator
* also enable fake poweroff/reboot on the emulator
* add Device.home_dir
* add Device:hasExitOptions() and update menus & comments
* remarkable: remove unnecessary screen invalidate on resume
This is handled in uimanager if needsScreenRefreshAfterResume is enabled
(which is the default).
* remarkable: pass a path argument to reader.lua
Otherwise if lastfile is not set in the settings (e.g. install and then
exit without opening a file) koreader will just refuse to start.
* remarkable: pass koreader.sh args (if any) through to reader.lua
Touchscreen is mirrored in X & Y and has a different resolution from the eink panel.
Uses systemd for time/date/suspend/poweroff/reboot
Two systemd units for platform integration. button-listen is a very
simple launcher.
to-do: add support for wifi by implementing a wpa supplicant dbus client.
Authored-by: Thomas Spurden <tcrs@users.noreply.github.com>
