Much easier to deal with thanks to the cleanup work done in #10062 ;).
* `carrier` is set to 1 as soon as the device is *administratively* up (in practice, as soon as we run `ifconfig up`). This is perfectly fine for `isWifiOn`, but absolutely not for `isConnected`, because we are not, actually, connected to *anything*, no attempt at associating has even been made at that point. Besides being semantically wrong, in practice, this will horribly break the connectivity check, because it expects that `isConnected` means we can talk to at least the LAN.
* Delving into the Linux docs reveals that `operstate` looks like a better candidate, as it reflects *operational status*; for Wi-Fi, that means associated and successfully authenticated. That's... closer, but still not it, because we still don't have an IP, so we technically can't talk to anything other than the AP.
* So, I've brought out the big guns (`getifaddrs`), and replicated a bit of code that I already use in the USBNetwork hack on Kindle, to detect whether we actually have an IP assigned. (Other approaches, like `/proc/net/route`, may not be entirely fool-proof, and/or get complicated when IPv6 enters the fray (which it does, on Kobo, Mk. 8+ devices are IPv6-enabled)).
TL;DR: Bunch of C via ffi, and `isConnected` now returns true only when the device is operationally up *and* we have an IP assigned.
Pulls in https://github.com/koreader/koreader-base/pull/1579 & https://github.com/koreader/lj-wpaclient/pull/10
cervantes kindle kobo remarkable: use sysfs carrier file to determine connection state
cleanup hasWifiManager checks
gateway check: use ip if available
Fixes: #10087Closes: #10092
isWifiOn for kindle currently returns if the interface is connected, change this to doing what is says isWifiOn the file is only present if the wireless interface is up.
isConnected pings the gateway, rely on the kernel for a more reliable check.
Whan connecting to my android phone's wifi hotspot to remote debug from my phone, the network is connected yet the phone(gateway) does not respond to pings leading koreader to shut down the connection thinking it is unsuccessful
* Get rid of the `canToggleGSensor` Device cap, it's now mandatory for `hasGSensor` devices. (This means Kindles can now toggle the gyro, fix#9136).
* This also means that `Device:toggleGSensor` is now implemented by `Generic`.
* Update the Screen & Gyro rotation constants to be clearer (c.f., https://github.com/koreader/koreader-base/pull/1568) (/!\ This might conceivably break some `rotation_map` user-patches).
* Input: Move the platform-specific gyro handling to Device implementations, and let Input only handle a single, custom protocol (`EV_MSC:MSC_GYRO`).
* Input: Refine the `rotation_map` disable method implemented in 43b021d37c. Instead of directly poking at the internal field, use a new method, `disableRotationMap` (/!\ Again, this might break some `rotation_map` user-patches).
* Input: Minor tweaks to event adjust hooks to make them more modular, allowing the Kobo implementation to build and use a single composite hook. API compatibility maintained with wrappers.
Basically:
* Use `extend` for class definitions
* Use `new` for object instantiations
That includes some minor code cleanups along the way:
* Updated `Widget`'s docs to make the semantics clearer.
* Removed `should_restrict_JIT` (it's been dead code since https://github.com/koreader/android-luajit-launcher/pull/283)
* Minor refactoring of LuaSettings/LuaData/LuaDefaults/DocSettings to behave (mostly, they are instantiated via `open` instead of `new`) like everything else and handle inheritance properly (i.e., DocSettings is now a proper LuaSettings subclass).
* Default to `WidgetContainer` instead of `InputContainer` for stuff that doesn't actually setup key/gesture events.
* Ditto for explicit `*Listener` only classes, make sure they're based on `EventListener` instead of something uselessly fancier.
* Unless absolutely necessary, do not store references in class objects, ever; only values. Instead, always store references in instances, to avoid both sneaky inheritance issues, and sneaky GC pinning of stale references.
* ReaderUI: Fix one such issue with its `active_widgets` array, with critical implications, as it essentially pinned *all* of ReaderUI's modules, including their reference to the `Document` instance (i.e., that was a big-ass leak).
* Terminal: Make sure the shell is killed on plugin teardown.
* InputText: Fix Home/End/Del physical keys to behave sensibly.
* InputContainer/WidgetContainer: If necessary, compute self.dimen at paintTo time (previously, only InputContainers did, which might have had something to do with random widgets unconcerned about input using it as a baseclass instead of WidgetContainer...).
* OverlapGroup: Compute self.dimen at *init* time, because for some reason it needs to do that, but do it directly in OverlapGroup instead of going through a weird WidgetContainer method that it was the sole user of.
* ReaderCropping: Under no circumstances should a Document instance member (here, self.bbox) risk being `nil`ed!
* Kobo: Minor code cleanups.
* UIManager: Support more specialized update modes for corner-cases:
* A2, which we'll use for the VirtualKeyboards keys (they'd... inadvertently switched to UI with the highlight refactor).
* NO_MERGE variants of ui & partial (for sunxi). Use `[ui]` in ReaderHighlight's popup, because of a Sage kernel bug that could otherwise make it translucent, sometimes completely so (*sigh*).
* UIManager: Assorted code cleanups & simplifications.
* Logger & dbg: Unify logging style, and code cleanups.
* SDL: Unbreak suspend/resume outside of the emulator (fix#9567).
* NetworkMgr: Cache the network status, and allow it to be queried. (Used by AutoSuspend to avoid repeatedly poking the system when computing the standby schedule delay).
* OneTimeMigration: Don't forget about `NETWORK_PROXY` & `STARDICT_DATA_DIR` when migrating `defaults.persistent.lua` (fix#9573)
* WakeupMgr: Workaround an apparent limitation of the RTC found on i.MX5 Kobo devices, where setting a wakealarm further than UINT16_MAX seconds in the future would apparently overflow and wraparound... (fix#8039, many thanks to @yfede for the extensive deep-dive and for actually accurately pinpointing the issue!).
* Kobo: Handle standby transitions at full CPU clock speeds, in order to limit the latency hit.
* UIManager: Properly quit on reboot & exit. This ensures our exit code is preserved, as we exit on our own terms (instead of being killed by the init system). This is important on platforms where exit codes are semantically meaningful (e.g., Kobo).
* UIManager: Speaking of reboot & exit, make sure the Screensaver shows in all circumstances (e.g., autoshutdown, re: #9542)), and that there aren't any extraneous refreshes triggered. (Additionally, fix a minor regression since #9448 about tracking this very transient state on Kobo & Cervantes).
* Kindle: ID the upcoming Scribe.
* Bump base (https://github.com/koreader/koreader-base/pull/1524)
This is useful for the sysstat plugin not to have 00:00 for suspend time :)
Something similar should probably be done for the other canSuspend platforms.
* AutoSuspend: Use the canSuspend devcap check instead of reinventing the wheel.
* Device & UIManager: Cleanup canSuspend devcap check related stuff to avoid boilerplate code.
(It also now defaults to no, and is explicitly set by device implementations where supported).
* AutoSuspend: Re-engage suspend/shutdown timers when fully charged.
This restores the existing behavior pre #9036
(c.f., https://github.com/koreader/koreader/pull/9258#issuecomment-1167672356)
* SDL: Unbreak the fake suspend behavior so that it actually works.
Tweak the default screensaver message to remind users that Power is bound to F2.
(Fix#9262)
* AutoSuspend: Re-engage suspend/shutdown timers on unplug.
This matters on Kobo, because the unexpected wakeup guard might have stopped the suspend timer.
* Disable all non power management related input during suspend. (This prevents wonky touch events from being tripped when closing a sleep cover on an already-in-suspend device, among other things).
* Kobo: Use our WakeupMgr instance, not the class.
* WakupMgr: split `removeTask` in two:
* `removeTask`, which *only* takes a queue index as input, and only removes a single task. Greatly simplifies the function (i.e., it's just a `table.remove`).
* `removeTasks`, which takes an epoch or a cb ref, and removes *every* task that matches.
* Both of these will also *always* re-schedule the next task (if any) on exit, since we can have multiple WakeupMgr tasks queued, but we can only have a single RTC wake alarm set ;).
* `wakeupAction` now takes a `proximity` argument, which it passes on to its `validateWakeupAlarmByProximity` call, allowing call sites to avoir having to duplicate that call themselves when they want to use a custom proximity window.
* `wakeupAction` now re-schedules the next task (if any) on exit.
* Simplify `Kobo:checkUnexpectedWakeup`, by removing the duplicate `WakerupMgr:validateWakeupAlarmByProximity` call, now that we can pass a proximity window to `WakeuoMgr:wakeupAction`.
* The various network activity timeouts are now halved when autostandby is enabled.
* Autostandby: get rid of the dummy deadline_guard task, as it's no longer necessary since #9009.
* UIManager: The previous change allows us to simplify `getNextTaskTimes` into a simpler `getNextTaskTime` variant, getting rid of a table & a loop.
* ReaderFooter & ReaderHeader: Make sure we only perform a single refresh when exiting standby.
* Kobo: Rewrite sysfs writes to use ANSI C via FFI instead of stdio via Lua, as it obscured some common error cases (e.g., EBUSY on /sys/power/state).
* Kobo: Simplify `suspend`, now that we have sane error handling in sysfs writes.
* Kobo.powerd: Change `isCharging` & `isAuxCharging` behavior to match the behavior of the NTX ioctl (i.e., Charging == Plugged-in). This has the added benefit of making the AutoSuspend checks behave sensibly in the "fully-charged but still plugged in" scenario (because being plugged in is enough to break PM on `!canPowerSaveWhileCharging` devices).
* AutoSuspend: Disable our `AllowStandby` handler when auto standby is disabled, so as to not interfere with other modules using `UIManager:allowStandby` (fix#9038).
* PowerD: Allow platforms to implement `isCharged`, indicating that the battery is full while still plugged in to a power source (battery icon becomes a power plug icon).
* Kobo.powerd: Implement `isCharged`, and kill charging LEDs once battery is full.
* Kindle.powerd: Implement `isCharged` on post-Wario devices. (`isCharging` is still true in that state, as it ought to).
* Handle said rotation shenanigans inside ScreenSaver & ScreenSaverWidget, which allows a more targeted approach; and prevents said rotation from affecting other widgets. (Also, gets rid of duplicated code).
* Handle the corner-case or exiting early from a "keep on screen for n sec" screensaver better, by unscheduling the extra refresh, since an early tap took care of that already.
* Only toggle nightmode via the grayscale fb info flag on Kindle
Most NTX boards require elaborate trickery (see fbdepth) to actually
send a vput ioctl without the driver screwing with the rotation behind
your back.
This was causing spurious hardware rotations on exit on most Kobo
devices, something which might have gone mostly unnoticed, as current
Nickel versions will sanitize it on startup.
A simple repro was instead to start an USBMS session, as that exits
KOReader and restarts it without going through fbdepth again ;).
* Rejig frontlight warmth API to more closely match the existing API, and, hopefully, clarify some of its quirks, and reduce boilerplate and duplicate code in platform implementations.
* Tweak Kindle:setDateTime to prefer using the platform's custom script, as in interacts better with the stock UI. And make the fallbacks handle old busybox versions better.
* Add Kindle PW5 support ;).
* Add warmth support to the Kindle platform.
* Random TextBoxWidget cleanups: make sure we immediately free destroyed instances.
* FrontLightWidget: Refactor to make it slightly less obnoxious to grok and update; i.e., separate layout from update, and properly separate brightness from warmth handling. Move to simpler widgets instead of reinventing the wheel.
* TextBoxWidgets: Implement `setText` to match TextWidget's API, as some callers may be using the two interchangeably (i.e., Button).
* NaturalLightWidget: Make sure we pass a string to InputText
* InputText: Add debug guards to catch bad callers not passing strings ;).
FocusManager: fix round x use y layout
FocusManager: add tab and shift tab focus navigation support
FocusManager: handle Press key by default
FocusManager: make sure selected in instance level
FocusManager: add hold event support
FocusManager: Half move instead of edge move
FocusManager: add keymap override support
FocusManager: refocusWidget will delegate to parent FocusManager
Focusmanager: refocusWidget can execute on next tick
inputtext: can move out of focus on back
inputtext: fix cannot exit for non-touch device
inputtext: fix cannot input text with kindle dx physical keyboard
fontlightwidget: add non-touch support
datetimewidget: add non-touch support
datetimewidget: fix set date failed in kindle DX, fix datetimewidget month range to 1~23 by default
datetimewidget: make hour max value to 23
multiinputdialog: add non-touch support
checkbox: focusable and focus style
virtualkeyboard: no need to press two back to unfocus inputtext
virtualkeyboard: collect FocusManager event key names to let VirtualKeyboard disable them
openwithdialog: add non-touch support
inputdialog: can close via back button
enable all InputDialog and MultiInputDialog can be close by back
keyboardlayoutdialog: non-touch support
readertoc: non touch device can expand/collapse in toc
bookstatuswidget: non touch support
keyvaluepage: non-touch support
calendarview: non-touch support
* LuaSettings/DocSettings: Updated readSetting API to allow proper initialization to default.
Use it to initialize tables, e.g., fixing corner-cases in readerFooter that could prevent settings from being saved.
(Fixes an issue reported on Gitter).
* LuaSettings/DocSettings: Add simpler API than the the flip* ones to toggle boolean settings.
* Update LuaSettings/DocSettigns usage throughout the codebase to use the dedicated boolean methods wher appropriate, and clean up some of the more mind-bending uses.
* FileChooser: Implement an extended default exclusion list (fix#2360)
* ScreenSaver: Refactor to avoid the pile of kludges this was threatening to become. Code should be easier to follow and use, and fallbacks now behave as expected (fix#4418).
Otherwise, ScreenSaver handling doesn't work, duh'.
I have no idea how I managed to get that working the last time I tested
it :?.
Possibly I tested the final code on a K4 and not a K3?
Fix#7333
* PB Crash Screen:
* We don't actually support the "tap to restart now" behavior, it's a
plain sleep.
* Remove CBB toggling leftovers missed in #6696Fix#6780
CBB now handles nightmode correctly (by deferring to Lua), so we no longer
need to do monkey dances about disabling it when hw invert is missing.
canUseCBB cap is resolved by generic device re-configuring blitbuffer
on the go, so as to avoid repeating the same thing in every device driver.
The dev setting can now flip cbb on the go, so one can gloat at the near
meaningless perf difference - 2Mp draw is 15ms Lua / 10ms C on 1GHz Cortex A7.
* Revamped most actions that require an internet connection to a new/fixed backend that allows forwarding the initial action and running it automatically once connected. (i.e., it'll allow you to set "Action when Wi-Fi is off" to "turn_on", and whatch stuff connect and do what you wanted automatically without having to re-click anywhere instead of showing you a Wi-Fi prompt and then not doing anything without any other feedback).
* Speaking of, fixed the "turn_on" beforeWifi action to, well, actually work. It's no longer marked as experimental.
* Consistently use "Wi-Fi" everywhere.
* On Kobo/Cervantes/Sony, implemented a "Kill Wi-Fi connection when inactive" system that will automatically disconnect from Wi-Fi after sustained *network* inactivity (i.e., you can keep reading, it'll eventually turn off on its own). This should be smart and flexible enough not to murder Wi-Fi while you need it, while still not keeping it uselessly on and murdering your battery.
(i.e., enable that + turn Wi-Fi on when off and enjoy never having to bother about Wi-Fi ever again).
* Made sending `NetworkConnected` / `NetworkDisconnected` events consistent (they were only being sent... sometimes, which made relying on 'em somewhat problematic).
* restoreWifiAsync is now only run when really needed (i.e., we no longer stomp on an existing working connection just for the hell of it).
* We no longer attempt to kill a bogus non-existent Wi-Fi connection when going to suspend, we only do it when it's actually needed.
* Every method of enabling Wi-Fi will now properly tear down Wi-Fi on failure, instead of leaving it in an undefined state.
* Fixed an issue in the fancy crash screen on Kobo/reMarkable that could sometime lead to the log excerpt being missing.
* Worked-around a number of sneaky issues related to low-level Wi-Fi/DHCP/DNS handling on Kobo (see the lengthy comments [below](https://github.com/koreader/koreader/pull/6424#issuecomment-663881059) for details). Fix#6421
Incidentally, this should also fix the inconsistencies experienced re: Wi-Fi behavior in Nickel when toggling between KOReader and Nickel (use NM/KFMon, and run a current FW for best results).
* For developers, this involves various cleanups around NetworkMgr and NetworkListener. Documentation is in-line, above the concerned functions.
* Allow locking the gyro to the current screen mode (i.e., orientation).
* Tweak the "sticky rota" option to work both ways
* More rotation constant usage instead of magic numbers
joins calibre metadata search and calibre wireless connections into a single plugin
search metadata changes:
- search directly into calibre metadata files.
- search can be performed on more than one library (configurable from a menu)
- device scans now find all calibre libraries under a given root
- search options can be configured from a menu. (case sensitive, find by title, author and path)
- removed legacy global variables.
- *option* to search from the reader
- *option* to generate a cache of books for faster searches.
calibre wireless connection changes:
- keep track of books in a library (includes prunning books from calibre metadata if the file was deleted locally)
- remove files on device from calibre
- support password protected connections
- FM integration: if we're in the inbox dir it will be updated each time a book is added or deleted.
- disconnect when requested by calibre, available on newer calibre versions (+4.17)
- remove unused opcodes.
- better report of client name, version and device id
- free disk space checks for all calibre versions
- bump supported extensions to match what KOReader can handle. Users can override this with their own list of extensions (or from calibre, by configuring the wireless device).
* generic Device:info() function which returns the model
* add Device:canSuspend() and make it true in all devices that have suspend routines and the emulator
* also enable fake poweroff/reboot on the emulator
* add Device.home_dir
* add Device:hasExitOptions() and update menus & comments
* Ensure feature-parity in ScreenSaver handling on Kindle
We were missing the fancy extra white flash and landscape handling that
most every other eInk device gets ;).
Fix#5724
* Minor SO tweaks
The "swipe to unlock" ad screen was possibly managing to seep through on
slow devices.
* Less convoluted and more consistent logic
Thanks, @yparitcher ;).
* Kindle FL shenanigans
Either fix#5986, or break a whole crapload of weird corner-cases.
Possibly the insane AutoFrontLight checks.
* Make fl step 0 usable on devices where 0 doesn't turn the light off.
By fudging an extra step on our own side.
* Also, add some debug logging around wmctrl to try to figure out what's
happening there...
* Allow running Shell/Python scripts from the FM
* Show an InfoMessage before/after running the script
Since we're blocking the UI ;).
* Allow running scripts from the favorites menu, too.
This commit standardizes the various todos around the code a bit in a manner recognized by LDoc.
Besides drawing more attention by being displayed in the developer docs, they're also extractable with LDoc on the command line:
```sh
ldoc --tags todo,fixme *.lua
```
However, whether that particular usage offers any advantage over other search tools is questionable at best.
* and some random beautification
* Fix Kindle model detection in some corner-cases
We were (currently) unaffected because we don't support the K1.
Still, this should be slightly more robust.
