* Disable all non power management related input during suspend. (This prevents wonky touch events from being tripped when closing a sleep cover on an already-in-suspend device, among other things).
* Kobo: Use our WakeupMgr instance, not the class.
* WakupMgr: split `removeTask` in two:
* `removeTask`, which *only* takes a queue index as input, and only removes a single task. Greatly simplifies the function (i.e., it's just a `table.remove`).
* `removeTasks`, which takes an epoch or a cb ref, and removes *every* task that matches.
* Both of these will also *always* re-schedule the next task (if any) on exit, since we can have multiple WakeupMgr tasks queued, but we can only have a single RTC wake alarm set ;).
* `wakeupAction` now takes a `proximity` argument, which it passes on to its `validateWakeupAlarmByProximity` call, allowing call sites to avoir having to duplicate that call themselves when they want to use a custom proximity window.
* `wakeupAction` now re-schedules the next task (if any) on exit.
* Simplify `Kobo:checkUnexpectedWakeup`, by removing the duplicate `WakerupMgr:validateWakeupAlarmByProximity` call, now that we can pass a proximity window to `WakeuoMgr:wakeupAction`.
* The various network activity timeouts are now halved when autostandby is enabled.
* Autostandby: get rid of the dummy deadline_guard task, as it's no longer necessary since #9009.
* UIManager: The previous change allows us to simplify `getNextTaskTimes` into a simpler `getNextTaskTime` variant, getting rid of a table & a loop.
* ReaderFooter & ReaderHeader: Make sure we only perform a single refresh when exiting standby.
* Kobo: Rewrite sysfs writes to use ANSI C via FFI instead of stdio via Lua, as it obscured some common error cases (e.g., EBUSY on /sys/power/state).
* Kobo: Simplify `suspend`, now that we have sane error handling in sysfs writes.
* Kobo.powerd: Change `isCharging` & `isAuxCharging` behavior to match the behavior of the NTX ioctl (i.e., Charging == Plugged-in). This has the added benefit of making the AutoSuspend checks behave sensibly in the "fully-charged but still plugged in" scenario (because being plugged in is enough to break PM on `!canPowerSaveWhileCharging` devices).
* AutoSuspend: Disable our `AllowStandby` handler when auto standby is disabled, so as to not interfere with other modules using `UIManager:allowStandby` (fix#9038).
* PowerD: Allow platforms to implement `isCharged`, indicating that the battery is full while still plugged in to a power source (battery icon becomes a power plug icon).
* Kobo.powerd: Implement `isCharged`, and kill charging LEDs once battery is full.
* Kindle.powerd: Implement `isCharged` on post-Wario devices. (`isCharging` is still true in that state, as it ought to).
Don't pass a non-window-level widget.
Painting is handled explicitly via widgetRepaint, so passing a widget to setDirty was just plain wrong anyway ;).
Allows the device to go into standby (if available in `/sys/power/state`) to save power.
Adds an entry in the device menu to tune the timeout for standby.
(Shows total standby- and suspend-time in system statistics.)
* Rejig frontlight warmth API to more closely match the existing API, and, hopefully, clarify some of its quirks, and reduce boilerplate and duplicate code in platform implementations.
* Tweak Kindle:setDateTime to prefer using the platform's custom script, as in interacts better with the stock UI. And make the fallbacks handle old busybox versions better.
* Add Kindle PW5 support ;).
* Add warmth support to the Kindle platform.
* Random TextBoxWidget cleanups: make sure we immediately free destroyed instances.
* FrontLightWidget: Refactor to make it slightly less obnoxious to grok and update; i.e., separate layout from update, and properly separate brightness from warmth handling. Move to simpler widgets instead of reinventing the wheel.
* TextBoxWidgets: Implement `setText` to match TextWidget's API, as some callers may be using the two interchangeably (i.e., Button).
* NaturalLightWidget: Make sure we pass a string to InputText
* InputText: Add debug guards to catch bad callers not passing strings ;).
FocusManager: fix round x use y layout
FocusManager: add tab and shift tab focus navigation support
FocusManager: handle Press key by default
FocusManager: make sure selected in instance level
FocusManager: add hold event support
FocusManager: Half move instead of edge move
FocusManager: add keymap override support
FocusManager: refocusWidget will delegate to parent FocusManager
Focusmanager: refocusWidget can execute on next tick
inputtext: can move out of focus on back
inputtext: fix cannot exit for non-touch device
inputtext: fix cannot input text with kindle dx physical keyboard
fontlightwidget: add non-touch support
datetimewidget: add non-touch support
datetimewidget: fix set date failed in kindle DX, fix datetimewidget month range to 1~23 by default
datetimewidget: make hour max value to 23
multiinputdialog: add non-touch support
checkbox: focusable and focus style
virtualkeyboard: no need to press two back to unfocus inputtext
virtualkeyboard: collect FocusManager event key names to let VirtualKeyboard disable them
openwithdialog: add non-touch support
inputdialog: can close via back button
enable all InputDialog and MultiInputDialog can be close by back
keyboardlayoutdialog: non-touch support
readertoc: non touch device can expand/collapse in toc
bookstatuswidget: non touch support
keyvaluepage: non-touch support
calendarview: non-touch support
widget
Since we only use a single icon, we have to take a few shortcuts:
* The icon itself is computed based on the average of both batteries.
* The actual value is the sum of both batteries.
* Much like everywhere else, charging means the *aux* battery charging
(i.e., connected to a power source).
Re #8741, which does the same for ReaderHeader.
Instead of baking in a hyphen, so as to avoid signed zeroes, or
confusion with page progress if page maps are enabled.
Also, made compact itemps RTL friendly.
Add a new reader module: ReaderScrolling, that exposes
some Scrolling options to the menu (which are to be used
by and implemented in ReaderPaging and ReaderRolling
themselves) and implement some inertial scrolling logic
used by both of them.
Default to "Classic scrolling" which is the expected
behaviour on phones and tablets.
The old CreDocument buggy behaviour is available as
"Turbo scrolling" for both Paging and Rolling documents.
Added a "On release scrolling" option that might be
useful on eInk to avoid dynamic pan/scrolling.
Try to avoid bad interactions between pan and swipe,
cancelling unwanted panning if we ended up doing a
swipe or multiswipe.
Namely, instead of making it lower priority than readerhighlight and
hoping for the best, make it higher priority, as it should (ReaderFooter
itself is *above* Reader, after all), with a sane set of fallthroughs:
* No footer
* No hold-to-skim
* Held outside the footer (but inside the footer tap zone)
This made the crap workaround from #7466 unnecessary, and actually fixes
the behavior in PDFs (because readerhighlight will match the *physical*
page, which may include off-screen content) and ePubs w/r eclaim bar
height (in which case, there's actual content behind the footer that
readerhighlight could have matched on).
Fix#7697
Make sure we don't repaint the footer over anything else than ReaderUI,
as some events are fired without direct UI interaction, so we can't be
assured of the actual state of the UI.
Fix#7556
Exposed since #7379, but could arguably happen with other existing
handlers before.
* LuaSettings/DocSettings: Updated readSetting API to allow proper initialization to default.
Use it to initialize tables, e.g., fixing corner-cases in readerFooter that could prevent settings from being saved.
(Fixes an issue reported on Gitter).
* LuaSettings/DocSettings: Add simpler API than the the flip* ones to toggle boolean settings.
* Update LuaSettings/DocSettigns usage throughout the codebase to use the dedicated boolean methods wher appropriate, and clean up some of the more mind-bending uses.
* FileChooser: Implement an extended default exclusion list (fix#2360)
* ScreenSaver: Refactor to avoid the pile of kludges this was threatening to become. Code should be easier to follow and use, and fallbacks now behave as expected (fix#4418).
* QuickDictLookup, ImageViewer, NumberPicker: Smarter `update` that will re-use most of the widget's layout instead of re-instantiating all the things.
* SpinWidget/DoubleSpinWidget: The NumberPicker change above renders a hack to preserve alpha on these widgets almost unnecessary. Also fixed said hack to also apply to the center, value button.
* Button: Don't re-instantiate the frame in setText/setIcon when unnecessary (e.g., no change at all, or no layout change).
* Button: Add a refresh method that repaints and refreshes a *specific* Button (provided it's been painted once) all on its lonesome.
* ConfigDialog: Free everything that's going to be re-instatiated on update
* A few more post #7118 fixes:
* SkimTo: Always flag the chapter nav buttons as vsync
* Button: Fix the highlight on rounded buttons when vsync is enabled (e.g., it's now entirely visible, instead of showing a weird inverted corner glitch).
* Some more heuristic tweaks in Menu/TouchMenu/Button/IconButton
* ButtonTable: fix the annoying rounding issue I'd noticed in #7054 ;).
* Enable dithering in TextBoxWidget (e.g., in the Wikipedia full view). This involved moving the HW dithering align fixup to base, where it always ought to have been ;).
* Switch a few widgets that were using "partial" on close to "ui", or, more rarely, "flashui". The intent being to limit "partial" purely to the Reader, because it has a latency cost when mixed with other refreshes, which happens often enough in UI ;).
* Minor documentation tweaks around UIManager's `setDirty` to reflect that change.
* ReaderFooter: Force a footer repaint on resume if it is visible (otherwise, just update it).
* ReaderBookmark: In the same vein, don't repaint an invisible footer on bookmark count changes.
* Flush mode to settings ASAP when an unrelated option updates the mode.
Fixes, among other things, *enabling* the progress bar while the status
bar is hidden: this showed it, but kept mode as "off".
* Don't stomp on the current mode when toggling the progress bar.
And *always* pop the status bar back up to see the difference, even if
it's hidden.
This used to be done only when *enabling* the progress bar.
* ReaderFooter:
* Honor the global twelve_hour_clock setting, instead of
duplicating a local one.
(Re #6969)
* os.date is a thin wrapper around strftime, so we might be able to get
away with some not-quite-standard extensions...
These are *definitely* supported on Linux, but are *NOT* the glibc
extension (that'd be e.g., %-I), so, hopefully, they're somewhat
portable...
They are also supported on BSD/macOS.
They are *not* supported by the MS UCRT. That means MinGW-w64, too.
This *appears* to be supported on current Bionic (it might even support
said glibc format altering extensions).
* And of course, Windows is terrible, so, make this terribly ugly to not
break it there...
* Turns out BSD also supports the dash trim format extension, so, leave
the trimming to the libc, and handle the special-casing in a way that
doesn't create stupid locals.
* Random unrelated cleanup ^^.
(https://gitter.im/koreader/koreader?at=5fd24be492aa1c4ef5d11f31)
* Update the testsuite
(Because the default used to be 24h clock).
Changed the default to 24h clock ;p.
* Explain why we don't try to fix it in Lua
* Top menu & bottom menu tapzones are now full-width, thanks to the now sane override system.
* A separate, extra tapzone was also created for each of them to provide a taller, but narrower tapzone extension (one that doesn't clash with the prev/next tapzones).
* The footer tapzone was made much taller.
Some stuff was still hacked on manually instead of trusting the widget system to do things right, which it does, if you update the right stuff at the right time the right way ;). *This Is The Way*.
Fix#6893 (and address https://github.com/koreader/koreader/pull/6878#discussion_r523411883, because it was indeed redundant ^^).
Includes a bonus fix for a number of (footer) settings not being applied immediately in PDFs.
