Lots of code was doing some renderText calls to get the size
of some text string, and truncate it to some width if needed,
with or without an added ellipsis, before instantiating
a TextWidget with that tweaked text string.
This PR fixes/adds some properties and methods to TextWidget
so all that can be done by it. It makes the calling code
simpler, as they don't need to use RenderText directly.
(Additionally, when we go at using Harfbuzz for text rendering,
we'll just have to update or replace textwidget.lua without
the need to update any higher level code.)
Also:
- RenderText: removed the space added by truncateTextByWidth
after the ellipsis, as it doesn't feel needed, and break
right alignment of the ellipsis with other texts.
- KeyValuePage: fix some subtle size and alignment issues.
- NumberPickerWidget: fix font size (provided font size was
not used)
* Changed File Browser text
KOReader looks nicer than KOReader File Browser,
* Remove the "page x of x" if only one page
Removes it from the bottom of the file browser
* Remove the "page x of x" if only one page
Removes it from the top menu, if there is only one page, why show page 1 of 1
* Renamed ~ to Home
Since the file browser can be considered "Home"
* Added 12 hour time option
Also tweaked the charging icon, ⚡ looks nicer than +, tweaked seperator between time and battery, - instead of @
A new setting has been adding allowing to set a comma separated list of
tags to ignore.
Entries with either of these tags will be skipped by the client when
fetching the list of articles to download. Extra articles will be
fetched from the server to make up for the skipped articles, ensuring to
meet the target number of articles.
Currently, all the articles were converted to .epub by default. When
handling an article that linked to a .pdf file, it resulted in an
unreadable file.
This patch skips the conversion for a pdf file, and download it directly
instead.
Adds joplin support, fixes https://github.com/koreader/koreader/issues/5086
Changes
-adds a submenu to evernote menu
- -Joplin
|-Set IP and port
|-Set authorization token
|-Export to Joplin
|-Help
-adds EvernoteExporter:exportBooknotesToJoplin()
-adds JoplinClient.lua
-modifies html_export, txt_export and joplin_export flags to work with each other. (eg if user selects one others deactivated)
Thanks to <https://github.com/koreader/koreader/pull/5237> we can now extract the knowledge currently embedded in Transifex and put it directly in our source. This positively affects <https://github.com/koreader/koreader/issues/3754>.
Translation instructions and knowledge that comes out of localization-related questions should be preserved in the source, because Transifex is too ephemeral. For example, the links from <https://github.com/koreader/koreader/pull/2290> are no longer accessible. Even when they are, it's quite useful to have this information around while dealing with the code as well, and I also hope it'll be informative to contributors who seldom visit Transifex.
This commit also makes a few minor changes to obviate the need for comments where possible.
This commit standardizes the various todos around the code a bit in a manner recognized by LDoc.
Besides drawing more attention by being displayed in the developer docs, they're also extractable with LDoc on the command line:
```sh
ldoc --tags todo,fixme *.lua
```
However, whether that particular usage offers any advantage over other search tools is questionable at best.
* and some random beautification
Patch similar to PR #3086.
Same problem #2638 when tap Subscribe to book share.
"Zsync" -> "Subscribe to book share" crashes koreader if not connected to wifi
After this fix when koreader is offline after "Zsync" -> "Subscribe to book share" we are asked to enable wifi.
* Make the cover thumbnail respect the cover's AR in the widget
* Add a "Mark as read/unread" button in the FM's longpress menu.
* Make sure the cover_info cache is wiped if necessary (sidecar purge/BookInfo cache clear).
Split the html page download out of createEpub, so that createFromDescription
can pass in its own html for epub packaging (with optional image download).
Still pass in a url, so that relative urls can be made absolute.
Fixes#5005
Results from re-running "Download news" should be as before, except when the
article content has changed between runs, but the title has not and an updated
date has not been given in the feed. User can force it to re-download an
article by manually deleting the file then running "Download news".
Wrap the whole of loadConfigAndProcessFeeds with Trapper:wrap so that feeds are downloaded sequentially, otherwise they become interleaved and the UI progress updates get confusing. Use Trapper:info in place of manually constructed InfoMessages.
Lift the Trapper:wrap call out of the individual article processing code,
so that articles are processed one by one, in order to:
* Avoid concurrent progress updates fighting over the UI dialog
* Avoid trying to download many images at the same time
Allow the user to specify whether to download images for each individual
feed specified in feed_config.lua. Default to false to stay closest to
existing behaviour.
* Make hasNaturalLight* caps safe to call without a device check. (fix#4919)
Make it clear that it's expecting the NTX implementation, though.
* Don't turn the FL on on resume if it was off on suspend
* Make sure turnOn/turnOff actually updates hw_intensity in the process where it matters, instead of just in a short lived fork ;). (fix#4923)
Going with partial ends up being problematic on REAGL devices in a
number of different ways.
On Kindle (at least pre EPDCv2), it's slightly flickery because of the
whitespace and the boldface.
On Kobo, it's slow when anything else tries to queue an update (i.e.,
flashing the chevrons).
Which is a non-issue on the Forma because then it's fast when using
pageturns to navigate, but, still :D.
The obvious downside is we lose the automatic flash after n refresh,
which is potentially annoying on older, non-reagl devices.
It's not really on issue on REAGL devices, especially on EPDCv2.
It was doing a full document load to get the cover. It now does
the faster "only metadata" load.
Also move the trick of setting a default font in CreDocument, so
that all callers of document:loadDocument(false) benefit from it.
Prevent crash when no cover image is available (even if the cache
says it has one, the file may have been updated and doesn't have
it anymore).
* Fix the "Enable debug logging" checkbox so that it properly disables "Enable verbose debug logging" when it gets disabled
* Avoid asking ImageWidget for alpha-blending when it's not useful
* Make ImageWidget's alpha-blending code-path double-check that alpha-blending actually is needed, and avoid it if possible
* In the same vein, only do alpha-blending in textboxwidget when absolutely necessary
* Prefer color constants over the gray() method, ensuring that they're part of the eInk palette
Depends on https://github.com/koreader/koreader-base/pull/853Fix#4774
* The Great 8bpp Experiment
Swap to 8bpp on Kobo, because we're 'effing grayscale, for pete's sake!
* Always swap to 8bpp, no matter the launch method.
Because it turned out that, even when restarting Nickel, we had to
restore the expected bitdepth ourselves, because pickel/Nickel didn't do
the job completely.
(I'm going to guess the grayscale flag wasn't getting flipped properly).
* Dither every non-transparent icon to the eInk palette
* Make sure hasBGRFrameBuffer is only enabled when the Kobo fb actually is
@ 32bpp...
* Re-process badly grayscaled icons
* And re-grayscale that one w/ gamma correction so the squares show up
better.
* Allow the fbdepth switch to be disabled (in Developer settings).
Also, allow setting debug mode that way.
Also, forcibly disable verbose logging when disabling debug.
* Update setting name to piggyback on the existing check in reader.lua
* Update icons postprocessing info
Avoids a use-after-free in mupdf.scaleBlitBuffer
Fixkoreader/koreader-base#821
Thanks for the hint, @poire-z ;).
* As @poire-z suggested, the original unscaled bb should probably be free'd.
* Enable HW dithering on supported devices (Clara HD, Forma; Oasis 2, PW4)
* FileManager and co. (where appropriate, i.e., when covers are shown)
* Book Status
* Reader, where appropriate:
* CRe: on pages whith image content (for over 7.5% of the screen area, should hopefully leave stuff like bullet points or small scene breaks alone).
* Other engines: on user-request (in the gear tab of the bottom menu), via the new "Dithering" knob (will only appear on supported devices).
* ScreenSaver
* ImageViewer
* Minimize repaints when flash_ui is enabled (by, almost everywhere, only repainting the flashing element, and not the toplevel window which hosts it).
(The first pass of this involved fixing a few Button instances whose show_parent was wrong, in particular, chevrons in the FM & TopMenu).
* Hunted down a few redundant repaints (unneeded setDirty("all") calls),
either by switching the widget to nil when only a refresh was needed, and not a repaint,
or by passing the appropritate widget to setDirty.
(Note to self: Enable *verbose* debugging to catch broken setDirty calls via its post guard).
There were also a few instances of 'em right behind a widget close.
* Don't repaint the underlying widget when initially showing TopMenu & ConfigDialog.
We unfortunately do need to do it when switching tabs, because of their variable heights.
* On Kobo, disabled the extra and completely useless full refresh before suspend/reboot/poweroff, as well as on resume. No more double refreshes!
* Fix another debug guard in Kobo sysfs_light
* Switch ImageWidget & ImageViewer mostly to "ui" updates, which will be better suited to image content pretty much everywhere, REAGL or not.
PS: (Almost 💯 commits! :D)
Revert 9971eb85 and make multi-lines strings more readable.
(Multiline translatable strings extraction has been fixed
in koreader-misc tralua_xgettext.py.)
The Wallabag plugin's callAPI() method was attempting to parse the user supplied
URL for the Wallabag API. Unfortunately, the parse was silently failing since
the variable apiurl did not contain a complete URL. The scheme of the parsed
URL (always nil) was then used to select either http or https (default). The
result being https was always selected, regardless of the user supplied setting.
The parsed URL was switched to the variable server_url instead of apiurl but the
behavior resulting in the default selection of https when parsing fails was left
unchanged.
Previously the plugin was creating JSON by hand for authentication requests.
This would cause invalid JSON to be sent when the password contained characters
that need to be escaped (e.g. "). Using JSON.encode will result in values being
properly escaped when necessary.
* Enforce a known rotation on startup, to make sure we handle touch input coordinates properly.
* Proper FrontLight warmth support (thanks to @cairnsh & @pazos in #4291)!
* Fix the PageTurn buttons mapping to match Nickel's defaults
* Properly remap PageTurn buttons depending on the current rotation.
* Actually enable the Mk.7 screen refresh codepath on *all* Mk.7 devices (I'd messed up the device check...).
* Full accelerometer handling (includes a touch of refactoring regarding orientation handling in general).
* Fix insidiously broken USBMS behavior in Nickel after we exit on FW >4.8.
Fix#4291Fix#3002
I tried to actually use this feature and five seconds isn't enough time to register the relevant IP:port to connect.
I'd add a menu item to call up the info (without a timeout) but this is just a web interface quickie.
By adding a `sorting_hint` to a menu item, the program will put orphaned items in the relevant (sub)menu instead of in the first menu with a NEW prefix.
Fixes#4393.
Manager supports separate gestures for the file manager and the reader. Gestures from the manager have a higher priority than built-in gestures.
Settings available in Gear -> Device -> Gesture manager
Mostly all that have a close button at top right, that may
be hard to reach or hit for some people: TOC, Bookmarks, History,
KeyValuePage (Book information, Statistics...), Book status...
Added full refresh on diagonal swipe where it was missing.
CoverMenu: removed onSwipe override, as it had become the same as
Menu a few months ago.
TouchMenu: added options to menu items with the following defaults:
keep_menu_open = false
hold_keep_menu_open = true
So, default for Tap callback is to close menu, and for Hold callback
to keep menu open.
In both cases, provide the TouchMenu instance as the 1st argument to
the callback functions (instead of a refresh_menu_func I added in #3941)
so the callback can do more things, like closing, refreshing,
changing menu items text and re-ordering...
ReaderZooming: show symbol for default (like it was done for
ReaderFont, ReaderHyphenation...)
TextEditor plugin: update the previously opened files list in real
time, so the menu can be kept open and used as the TextEditor main
interface.
SSH plugin: keep menu open and update the Start/Stop state in real time
ReadTimer plugin: tried to do what feels right (but I don't use it)
Also remove forgotten cp in the move/paste file code
Feature of ScrollTextWidget, only used for now by TextEditor.
Pan is like Swipe, but wait a bit at end of gesture to release:
the line on which Pan was started will be moved to where Pan is
released.
May conflict with MovableContainer (so not enabled for DictQuickLookup,
where it could have been nice - but it would work only with text
dictionaries, not with HTML ones, as ScrollHtmlWidget can't really
do that).
This plugin mostly sets up a "Text editor>" submenu, that allows
browsing files, creating a new file, and managing a history of
previously opened file for easier re-opening.
It restore previous scroll and cursor positions on re-opening.
Additional "Check lua" syntax button is added when editing
a .lua file, and prevent saving if errors.
The text editing is mainly provided by the enhanced InputDialog.
InputDialog: added a few more options, the main one being
'save_callback', which will add a Save and Close buttons
and manage saving/discarding/exiting.
If "fullscreen" and "add_nav_bar", will add a show/hide keyboard
button to it.
Moved the preset buttons setup code in their own InputDialog
methods for clarity of the main init code.
Buttons are now enabled/disabled depending on context for feedback
(eg: Save is disabled as long as text has not been modified).
Added util.checkLuaSyntax(lua_string), might be useful elsewhere.
Some problem somewhere with [[...]] strings starting with a
leading newline. Should probably be allowed, but for now
fix the few such cases to allow them being translated.
