to make koreader on Android more stable
and with these opt params:
```
require("jit.opt").start("sizemcode=64","maxmcode=64", "hotloop=10000")
```
The strategy here is that we only use precious mcode memory (jitting)
on deep loops like the several blitting methods in blitbuffer.lua and
the pixel-copying methods in mupdf.lua. So that a small amount of mcode
memory (64KB) allocated when koreader is launched in the android.lua
is enough for the program and it won't need to jit other parts of lua
code and thus won't allocate mcode memory any more which by our
observation will be harder and harder as we run koreader.
Matches the reader setting we're reading/writing at that point,
and avoids confusion related to scoping because it doesn't necessarily
match powerd.is_fl_on at that point.
Well, at least I had to wrap my mind around it ^^
* Drops support for mocking the frontlight setting internally which may
cause incorrect in-memory values.
* Adds new supported value for `KOBO_LIGHT_ON_START` (-2), which sets
'Kobo eReader.conf' as the source to update `settings.reader.lua`'s
brightness setting on startup, thus using the value from it
indirectly.
* Adds the `KOBO_SYNC_BRIGHTNESS_WITH_NICKEL` configuration variable
which updates 'Kobo eReader.conf' every time the brightness setting is
changed within koreader.
* Fixes missing call to save brightness when modifying via two-finger
swipe.
Closes#1523.
_checkTasks first get number of tasks in the stack and does a numeric
for loop to go through each task. The problem is a task might call
schedule or unschedule, which will reorder tasks in the stack. This will
invalidate many of the table indexes used in the for loop.
This patch turns the task stack into an ordered queue, so _checkTasks
only pops one item out of the queue each time instead of setting up a
for loop at the beginning. This should avoid the race condition
mentioned above.
Making sure to always show up to date info.
Also fix the battery polling cache invalidation logic to actually
work?
Should make it behave properly on devices where we handle resuming
ourselves.
Currently only tested on Ubuntu-touch emulator with framework
ubuntu-sdk-14.10 for armhf.
The ubuntu-touch port is binary compatible with the Kobo port
major changes in this PR are:
1. rename the emulator device to sdl device since both the emulator
and the ubuntu-touch target use libsdl to handle input/output.
2. ubuntu-touch app has no write access to the installation dir so
all write-outs should be in a seperate dir definded in `datastorage`.
And also probably prevent a crash when trying to enable WiFi there.
We really shouldn't even show the WiFi stuff on some of these old
devices, but at least now it doesn't crash ;).
use coroutine to support ad-hoc callback in login button so that when
the username/password is incorrect it will retry automatically
currently tested with COPS on apache
This should fix#1001.
and get rid of the ugly baseurl workaround for "Internet Archive",
actually the url building of all these catalogs is perfectly
handled with `url.absolute(base, relative)`.
Without this fix, self.dimen is shared among all inputcontainers
intances, which breaks some of the UI rendering. All widget should
set/initialize their own self.dimen in self:init() method.
Allow one to go further in the FM's setting menu on legacy devices...
... and potentially shoot oneself in the foot because of the unusable
confirmdialogs (among other things ;p).
To avoid potential issues with USBMS.
Namely, make sure CWD doesn't point to the userstore for persitent
processes.
Make sure wpa_supplicant doesn't try to use our own OpenSSL lib, which,
again, is in the userstore area.
Properly kill our dhcp client invocation on when killing WiFi
Also, some related fixes to the startup script:
Properly kill wpa_supplicant & the dhcp client when we kill
wifi before rebooting to nickel.
More closely matches native behavior on REAGL devices.
Closing those widgets should still trigger a partial refresh though,
because we usually get back to the reader, and text, so we want REAGL
;).
The VFAT file system of `/mnt/us` is case insensitive so that
require("json") from Spore which intends to load luajson module in
rock directory actually will load `frontend/JSON.lua`, the two JSON
parser libraries have slightly different APIs.
This patch remove the pure Lua JSON library in favor of `luajson` which
uses LPeg pattern marching backend for better performance.
it uses non-blocking turbo I/O looper to process http request
so that multiple http request can be handled simultaneously and http request
won't block user input, and most importantly, in Lua's way.
Change from the commands from `wifi.sh` to those from `wifi_enable_dhcp.sh` from Tshering's Start Menu. See Issue #939. Should resolve hanging of Kobo Aura H2O.
It turns out that one of our mupdf patch reads the FONTDIR env var
and uses it in a totally different way so we will use another env var
EXT_FONT_DIR to define external font directory for different platforms.
to support custom font directory for EPUB documents
Now Koreader could find fonts in the "fonts" directory in the USB root
directory of kindle, Kobo and PocketBook devices, thus no need to copy
fonts to "koreader/fonts" directory.
This is a larger clean-up of the refresh situation.
The general shift is that refreshes are now mainly triggered by
the (top-level) widgets when they get shown or closed via UIManager.
All refreshes for the widgets when they are in use were handled by
themselves before. This adds the case of showing/closing.
It is the desired result of not having UIManager:show()/:close()
do (full screen) refreshes on its own.
This eliminates the API difference between the extra parameters of
UIManager:show() and setDirty(). They work the same now.
Note that this also eliminates the automatic refresh that took place
before when using show() without refresh options. It always refreshed
the full screen, which led to too big refresh regions all over the
place. Thus, refresh has now explicitly to be asked for, hopefully
encouraging to implement it in the widget that gets shown (and is
aware about the screen region it covers).
Also add an event that is triggered when a widget is closed:
CloseWidget. So a widget can implement "onCloseWidget()" to trigger
actions upon closing - most commonly, this is a refresh for the area
previously taken by the widget. That way, the widget's user does not
have to take measures to ensure that the area is refreshed later.
for now, we have show() automatically call setDirty() for the new
widget, as before. However, now show() takes two arguments for
refresh configuration that will get passed on to setDirty().
For compatibility, the default is here in show() to do a partial
refresh. So if you want no refresh triggered (via this show() call),
add a function that doesn't return anything.
This serves as a good example for the way refreshes are done:
setDirty("all", function() ... end)
* the "all" will have all widgets on screen repainted.
In this case that is needed because the config pane has
different sizes, covering different parts of underlying
widgets. So they need to be repainted every time.
* the function will return the area to refresh and is evaluated
after painting. In this example, we take the area that is covered
by the config pane before switching it (if present at all), and
hand it to the refresh area function as an upvalue.
When the function is called later after painting, it will
use that saved area and combine it with the area that is covered
then by the widget. That way, parts that are covered no more are
included in the refresh area, too.
See documentation in the code.
In short: There is now one single method, setDirty(), that triggers
repaints and/or refreshes.
All variables in UIManager are gone - at least from an external
perspective. Everything is done through setDirty().
This also allows for easier debugging, since all requests come
in via function calls.
when the image (e.g. a PNG) does contain an alpha channel, that can
be honored by ImageWidget. It doesn't do so by default for compatibility
(arguably, we should change that in the future), it has to be enabled
by setting the "alpha" property to "true" (boolean, not string).
external data (and in bad cases our own) can contain invalid byte
sequences in UTF8 strings. A prominent example are file names.
There was a 1-off bug in calculating the allowed length for multibyte
chars, and the iterator was a bit too greedy when stumbling upon
invalid sequences, returning a single "invalid" char for a sequence
up to the point where it became invalid in calculation. Now, we present
one invalid char for the first byte of that sequence and then check
for a valid char starting with the next byte.
This is the remaining gruntwork of #1276. I believe that only leaves networkmgr.lua and filemanagersearch.lua, which will require a little more thought.
our network manager script isn't the beauty of the code base.
However, this fixes a case where it would crash the reader when an
external command fails.
fixes#1279.
the height of filechooser is provided when creating filechooser
widget since there may be no title as in filemanger which needs
a special title widget to contain filemanger menu.
Lots of the device-related distinction wandered into
base/ffi/framebuffer_<driver>. This eases the refresh logic in
UI manager, which basically only decides what kind of refresh
to trigger. The device specific configuration in the framebuffer
driver decides how to realize that whish.
screen.lua is gone, in its place is now the framebuffer driver.
The device abstraction decides what framebuffer driver to load.
While looking into #1219 I accidentally ended up refactoring some stuff.
Tested in emulator and on H2O, but be wary because I might have overlooked something.
Don't increase counter for regional updates
Also some workarounds for Kobos
Try to avoid update_regions_func poisoning
Reset it at the end of repaint() even if nothing was found dirty
Ensure regional updates are always PARTIAL, in
case we get a region attached to an automatically triggered refresh, not
marked force_partial [which, hey, shouldn't happen, but apparently does
sometimes ^^]
This will convert any file name to lowercase before doing the comparison.
Note that this will only work for ASCII character range, a full Unicode
aware solution will be much more complicated. And in the end, file names
are byte arrays, not character strings ;-)
fixes#1183.
The strcoll() workaround we had in place for Kobo devices was (or has
become) ineffective. We had set self.strcoll to nil on Kobo devices -
but this was the instance variable. Setting it to nil effectively makes
the instance variable vanish, so when trying to access it later, it
was not there and got looked up via the metatable - which had the original
reference. Setting it to nil had no effect whatsoever.
We simplify that approach and set the replacement function where before we
had set this to nil.
This is a partial fix for issue #1183 (and explains a comment in issue #686
which says that the old fix did not work).
However, to really fix#1183 - if we want to do so - we would need a collate
function that normalizes uppercase/lowercase before compare.
Since commit 12a76fee33, we had a potential
bug on the event mechanism:
It introduced (besides the checkTasks method itself) a second run of the
checkTasks() method. In the second run, however, scheduled events were
not taken into consideration in how long to wait for input events
afterwards.
So when the after the first run of checkTasks() there were new scheduled
tasks added to the task queue, they were not properly scheduled and
and depended on an already existing scheduled event or an input event
to trigger.
This might have led to unexpected order of execution (though the order
is not guaranteed by the task scheduling anyway!) or to events triggering
not at all until the next input event.
And koreader release version is normalized to a 10 digits containing
a four digits year field followed by a two digits month field followed
by a four digits revision field like "2014041079".
re #1119
AUTO appears to be doing the right thing...
(even if that baffles me, given the state of the Kernel sources,
unless they flip some switches at compile time
[NTX_WFM_MODE_OPTIMIZED_REAGL / NO_AUTO_REAGL_MODE] ...)
Anyway, that's what nickel does, so follow its lead ;).
and remove the wifi toggler on the footer of each menu page,
so that network status is only checked (currently with the stdout of ip cmd)
when navigating to the "Network settings" submenu instead of checking
on each menu popup.
Don't hijack forced partial updates (i.e., from UI elements) on always
FULL REAGL devices. It doesn't implode if we don't, and it makes for a
snappier UI.
WIP, untested, can probably simplified some more.
Good news is, it should be smarter, and thus provide a smoother user
experience :).
Relies on the relevant changes in base.
We wouldn't want those to become full updates ;).
Also apply an optionally different waveform mode for such partial,
regional updates (right now, only Kindle devices make use of this finer
grained control).
which currently just sets free the limitation of panning gestures
emitting rate. This should fix#1039 when unchecking the
"E-ink optimization" in the "Screen settings".
This is a major overhaul of the hardware abstraction layer.
A few notes:
General platform distinction happens in
frontend/device.lua
which will delegate everything else to
frontend/device/<platform_name>/device.lua
which should extend
frontend/device/generic/device.lua
Screen handling is implemented in
frontend/device/screen.lua
which includes the *functionality* to support device specifics.
Actually setting up the device specific functionality, however,
is done in the device specific setup code in the relevant
device.lua file.
The same goes for input handling.
ConfirmBox and InfoMessage are default to be modal.
Now returning to filamanager after highlighting a PDF page
the confirmbox asking users to save the document will not be hidden by
the filamanager window.
And it's tested on Kindle that #791 is already been solved probably by
out refacorting of MuPDF backend.
And also fix a touchmenu bug that prevent some menu entries
(always at the bottom of the menu) from showing submenus. The reason is
that the onTapSelect method of TouchMenuItem doesn't return true, so that
the tap gesture will propagate to the parent widget and be captured by
touchmenu itself. But at this time the dimen of touchmenu is changed to
the submenu of the tapped menuitem. If the submenu is short enough the
tap will be outside of touchmenu which will cause a TapCloseAllMenus
event and the submenu will never be shown.
colors were a mixture of 4bpp integers (0=white, 15=black) and
fractional blackness levels (0=white, 1.0=black) before. This is
now unified to use the color specification of the Blitbuffer API.
The #1011 bug is caused by the `contains` check of link box with
visible area. When the link is at the very right (left?) of
the page, enlarged link box often exceeds the page bound rendering
the mentioned `contains` check failed. This patch uses an `intersectWith`
test to check if the link is in current page.
This will use the new API where the Lua/C interface was used before
and also drop usage of mupdfimg wrapper which is now implemented
within the mupdf interface
rendertext.lua did use addblitFrom() for rendering text - i.e. blitting
the letters to a BlitBuffer. However, it used intensity=1.0, which is
the same as doing a (faster, more efficient) blitFrom(). So use that
instead.
What was probably intented here is a different kind of blitting - using
the bitbuffer of the glyph as a mask.
This plugin implements a simple Calibre Companion protocol that
communicates with Calibre Wireless Server from which users can
send documents to Koreader devices directly with WIFI connection.
Note that Calibre Companion(CC) is a trade mark held by MultiPie Ltd.
The Android app Calibre Companion provided by MultiPie is closed-source.
This plugin only implements a subset function of CC according to the
open-source smart device driver from Calibre source tree.
More details can be found at calibre/devices/smart_device_app/driver.py.
This should close#856.
Although still closed I will check this one back with someone from the German forum, I hope this also closes#822, but there might be still some problems with the light-bug introduced in Kobo's firmware 3.5. But since 822 is already in the state closed we can leave things as they are for now and I will reopen 822 if necessary.
Epub only.
If someone knows how to get an jpg/png from a pdf on linux (e.g. convert by imangemagick? But i am not a linux specialist and have no idea how to get that one into koreader) I can add something for linux too.
cbz/cbr should be possible too, but I have not looked into it yet.
Do I see it right that the Kindle screensavers are handled by Kindle itself?
But on Kindle you also profit, you can see picture thumbnails now in the search results (long tap on found book)
Since wikipedia server is language specific we should first detect
language of the text by querying Google Translate. Make sure you have
access to both Google Translate and Wikipedia service to use this
function.
As well as the width of the toc notches
Lower the default value of the container size a bit to avoid eating into
the last line on small borders setup (I checked on 167 & 212 DPI
devices, Feel free to revert to the previous value (19) if that causes
trouble).
I have *no* idea how that even seemed to work, but in fact didn't.
Also no idea where the hell is the battery status supposed to appear in
the menu, because it's currently not there.
Tested in Kobo Aura HD.
Suspend can still be interrrupted if user touches the screen after
slided the power button and before the suspend function is called (2s delay).
Reason for this is still unkown.
This is a stupid bug I introduced when I thought 0 evaluated to be false.
Actually in Lua only explicit `false` and `nil` are evaluated to `false`
all other values are true in logical expressions.
This should also fix#546. Probably because the touch screens in Kindle
are not as sensitive as in Kobo, this problem is not discovered early
util I play with multi-touch on a Android phone which has a sensitive
enough screen to expose this bug.
For now, we can probably live better with the assumption that
Android devices do not have keyboards. That should be replaced
by an actual check, though.
Now the frontlight remains unchanged from Nickel to koreader and vice
versa.
Also ffi/kobolight.lua has been changed to allow for usage of the toggle
button in the filemanager.
The "My Clipping" file that storing highlights and notes for Kindle
native readers could also be parsed and exported. The parser is
implemented in `evernote.koplugin/clip.lua`.
Parsed highlights and notes in one book will be packed and rendered
into html node with a slt2 template `note.tpl` that complies with
evernote markup language(ENML).
Finally the evernote client will create or update note entries and
push them to Evernote cloud.
It changes `steps` in line 13 for better finetuning,
`rate` in line 22 so that it has a nil value for `Kobo_phoenix'
and delta_int in line 48 to the last know working syntax.
Could someone check whether line 22 does result in 3.0 for non-phoenix devices?
Code is added to switch between Kobo Aura (Phoenix) and others.
`ReaderFrontLight`, `self.ges_events` and the `function ReaderFrontLight:onAdjust` are now different for Kobo Aura. This enables me to do a two-fingered-pan over approx 1/4 Screenheight to change from full on to full off.
The difference to the default implementation is that both the `rate` and the `msg` are omitted and the `steps` are different.
FURTHER ROOM FOR IMPROVEMENT: It would be an improvement to get a final message after the two-fingered-pan is done stating the achieved setting.
Signed-off-by: Markismus <zulde.zuldemans@gmail.com>
if new timer has a timeout later than a timer in queue, the
new timer will be discarded and never be pushed into timer queue.
This is fixed by pushing new timer without timeout checking
and then sorting the queue according to timer timeouts.
This should fix#520 and #495.
This hack is to rescue wrong zoom level after removing unnecessary
`self:handleEvent(Event:new("SetDimensions", self.dimen))` at the
end of ReaderUI initialization which otherwise would confuse crengine
with two different dimens and would cause inconsistent reading progress.
- Refactor FileDialog and HightlightDialog into ButtonDialog
- Create a new ButtonDialog when a file in the History dialog is hold,
offering an option to delete the history entry.
Otherwise, current_page can acquire negative values, or values greater
than the page count, when the user tries to go back the first page
or past the last page.
This adds screenshot functionality for the Kobo Aura.
The pam-files generated can be read and converted using Imagemagick for linux/windows.
I've added the infomessage because it takes 5+ tries to get a screenshot by tapping the lower left and upper right corners. The other diagonal is not working for the Kobo Aura yet.
Bookmark flipping mode is toggled when long-holding the upper-right
corner of the screen. In this mood both the flipping icon and the dogear
icon are shown. And swiping west and east in this mode will flipping
only on bookmarked pages. Currently only pdf/djvu readers are supported.
This should implement feature request in #154.
Luckily after disabling floating punctuation left/right margin
are able to be same now (with large enough margins, should be
more than 1em). So I also changed the default page margins for
crereader and removed the dirty hack.
In regional zoom mode double tap will zoom to the tapped
region(paragraph or column, etc., detected optically via libk2pdfopt).
As the first demo, this feature is only turned on in flipping mode by
tapping the top-left corner of the screen. Eventually we may incorporate
this feature in "free" zoom mode.
When the the power_off switch is pulled a empty SYN_REPORT is generated and koreader crashed on a DEBUG line.
The DEBUG lines now generate identically spaced output, which makes it easier to read by eye.
use `self.highlight:handleEvent(Event:new("Tap"))` instead of
`self.ui:handleEvent(Event:new("Tap"))` when clearing highlighted
text since Tap event in latter situation will be captured by
the dogear widget.
While debugging ```GestureDetector:panState(tev)``` I saw that the TRACK ID never had -1 values .
So back to debugging ```input.lua```.
Now the Kobo Aura can pinch and expand.
/luajit: ./frontend/ui/gesturedetector.lua:84: attempt to concatenate field 'y' (a nil value)
Hopefully the use of the "," in the DEBUG function instead of the string concatenate operator gets rid of it.
without the height of the close button widget
This will make room for one more menu item entry and fix#355 and #394.
The larger tap zone for close button widget is still there.
the Kobo framebuffer comes up in landscape mode, that is, landscape
in the other direction as we do it when going into landscape mode.
we leave it this way, and rather allow for a rotation correction at
framebuffer setup.
this PR pulls the relevant changes from koreader-base and makes the
screen code aware of this additional rotation setting.
Kobo framebuffers should now work properly with the new framebuffer
FFI code. They can stay in 16bpp mode and don't change the current
framebuffer settings. They should thus properly interoperate with
the native framework on Kobos as well as sergeys KoboLauncher
(no garbled screen when returning)
Screen.width and Screen.height are now gone, use the methods
getWidth() and getHeight() to get the relevant data. They will
take blitbuffer/framebuffer rotation into account.
We can get rid of shadow blitbuffers. Screen.bb is now fb.bb.
All bpp conversion is now done by the blitbuffer abstraction layer.
Rotation mechanism is adapted to this.
This should finish the work to make all globals to local variables.
That allows LuaJIT to properly compile things by interning the
references to the relevant parts (rather than looking up globals
all the time which stops a trace).