* afterResume had *two* different implementations, so the historical one
that handled frontlight fixups no longer ran
(regression since #10426)
* isFrontlightOn was completely broken, for a couple of reasons:
* There was no is isFrontlightOnHW implementation, so when it ran, it
mostly always thought the frontlight was on, because
self.fl_intensity doesn't change on toggle off.
* _decideFrontlightState was never called on Kindle,
so isFrontlightOnHW was never really called, making isFrontlightOn
completely useless. Call it in setIntensityHW's coda, as it ought to
be. And properly document that.
Generic *was* calling _decideFrontlightState is setIntensity, but
*before* actually setting the frontlight, which makes no goddamn sense,
so get rid of that, too.
* Also fix frontlight toggle notifications (regression since #10305)
TL;DR: The PowerD API being a mess strikes again.
It's been made redundant by the RPATH changes
The only platform that gets the dubious honor of actually needing an
LD_LIBRARY_PATH is PocketBook, because of InkView.
Co-authored-by: Benoit Pierre <benoit.pierre@gmail.com>
Bump base to pull in the aforementioned RPATH changes ;).
https://github.com/koreader/koreader-base/pull/1638
Make sure we only send Suspend/Resume events when we *actually* suspend/resume. This is done via the Device `_beforeSuspend`/`_afterResume` methods, and those were called by the *input handlers*, not the PM logic; which means they would fire, while the PM logic could actually take a smarter decision and *not* do what the event just sent implied ;).
(i.e., sleep with a cover -> suspend + actual suspend, OK; but if you then resume with a button -> input assumes resume, but PM will actually suspend again!).
Existing design issue made more apparent by #9448 ;).
Also fixes/generalizes a few corner-cases related to screen_saver_lock handling (e.g., don't allow USBMS during a lock).
And deal with the fallout of the main change to the Kobo frontlight ramp behavior ;).
Some devices don't ship with iproute2 compatible tools, but may ship
with net-tools compatible ones.
Unify code w/ SDL's similar codepaths for its NetworkMgr:isConnected
implementation
cervantes kindle kobo remarkable: use sysfs carrier file to determine connection state
cleanup hasWifiManager checks
gateway check: use ip if available
Fixes: #10087Closes: #10092
* Get rid of the `canToggleGSensor` Device cap, it's now mandatory for `hasGSensor` devices. (This means Kindles can now toggle the gyro, fix#9136).
* This also means that `Device:toggleGSensor` is now implemented by `Generic`.
* Update the Screen & Gyro rotation constants to be clearer (c.f., https://github.com/koreader/koreader-base/pull/1568) (/!\ This might conceivably break some `rotation_map` user-patches).
* Input: Move the platform-specific gyro handling to Device implementations, and let Input only handle a single, custom protocol (`EV_MSC:MSC_GYRO`).
* Input: Refine the `rotation_map` disable method implemented in 43b021d37c. Instead of directly poking at the internal field, use a new method, `disableRotationMap` (/!\ Again, this might break some `rotation_map` user-patches).
* Input: Minor tweaks to event adjust hooks to make them more modular, allowing the Kobo implementation to build and use a single composite hook. API compatibility maintained with wrappers.
Basically:
* Use `extend` for class definitions
* Use `new` for object instantiations
That includes some minor code cleanups along the way:
* Updated `Widget`'s docs to make the semantics clearer.
* Removed `should_restrict_JIT` (it's been dead code since https://github.com/koreader/android-luajit-launcher/pull/283)
* Minor refactoring of LuaSettings/LuaData/LuaDefaults/DocSettings to behave (mostly, they are instantiated via `open` instead of `new`) like everything else and handle inheritance properly (i.e., DocSettings is now a proper LuaSettings subclass).
* Default to `WidgetContainer` instead of `InputContainer` for stuff that doesn't actually setup key/gesture events.
* Ditto for explicit `*Listener` only classes, make sure they're based on `EventListener` instead of something uselessly fancier.
* Unless absolutely necessary, do not store references in class objects, ever; only values. Instead, always store references in instances, to avoid both sneaky inheritance issues, and sneaky GC pinning of stale references.
* ReaderUI: Fix one such issue with its `active_widgets` array, with critical implications, as it essentially pinned *all* of ReaderUI's modules, including their reference to the `Document` instance (i.e., that was a big-ass leak).
* Terminal: Make sure the shell is killed on plugin teardown.
* InputText: Fix Home/End/Del physical keys to behave sensibly.
* InputContainer/WidgetContainer: If necessary, compute self.dimen at paintTo time (previously, only InputContainers did, which might have had something to do with random widgets unconcerned about input using it as a baseclass instead of WidgetContainer...).
* OverlapGroup: Compute self.dimen at *init* time, because for some reason it needs to do that, but do it directly in OverlapGroup instead of going through a weird WidgetContainer method that it was the sole user of.
* ReaderCropping: Under no circumstances should a Document instance member (here, self.bbox) risk being `nil`ed!
* Kobo: Minor code cleanups.
* UIManager: Support more specialized update modes for corner-cases:
* A2, which we'll use for the VirtualKeyboards keys (they'd... inadvertently switched to UI with the highlight refactor).
* NO_MERGE variants of ui & partial (for sunxi). Use `[ui]` in ReaderHighlight's popup, because of a Sage kernel bug that could otherwise make it translucent, sometimes completely so (*sigh*).
* UIManager: Assorted code cleanups & simplifications.
* Logger & dbg: Unify logging style, and code cleanups.
* SDL: Unbreak suspend/resume outside of the emulator (fix#9567).
* NetworkMgr: Cache the network status, and allow it to be queried. (Used by AutoSuspend to avoid repeatedly poking the system when computing the standby schedule delay).
* OneTimeMigration: Don't forget about `NETWORK_PROXY` & `STARDICT_DATA_DIR` when migrating `defaults.persistent.lua` (fix#9573)
* WakeupMgr: Workaround an apparent limitation of the RTC found on i.MX5 Kobo devices, where setting a wakealarm further than UINT16_MAX seconds in the future would apparently overflow and wraparound... (fix#8039, many thanks to @yfede for the extensive deep-dive and for actually accurately pinpointing the issue!).
* Kobo: Handle standby transitions at full CPU clock speeds, in order to limit the latency hit.
* UIManager: Properly quit on reboot & exit. This ensures our exit code is preserved, as we exit on our own terms (instead of being killed by the init system). This is important on platforms where exit codes are semantically meaningful (e.g., Kobo).
* UIManager: Speaking of reboot & exit, make sure the Screensaver shows in all circumstances (e.g., autoshutdown, re: #9542)), and that there aren't any extraneous refreshes triggered. (Additionally, fix a minor regression since #9448 about tracking this very transient state on Kobo & Cervantes).
* Kindle: ID the upcoming Scribe.
* Bump base (https://github.com/koreader/koreader-base/pull/1524)
* Kobo: Discriminate between the Touch A/B and the Touch C properly, and implement actual support for the A/B input quirks. This means the clunky touchscreen probe widget shown on fresh installs on those devices is now gone :}.
* Input: Fix an off-by-one in most adjustTouchMirrorX/Y callers (only rM was doing it right), and adjust their documentation to avoid similar mistakes in the future.
* GestureDetector: Unify logging to always display transformed coordinates for simple gestures.
* GestureDetector: Fix two-contact hold lifts to be computed at the midpoint between the two contacts, like their holds counterpart already did.
* AutoSuspend: Use the canSuspend devcap check instead of reinventing the wheel.
* Device & UIManager: Cleanup canSuspend devcap check related stuff to avoid boilerplate code.
(It also now defaults to no, and is explicitly set by device implementations where supported).
* AutoSuspend: Re-engage suspend/shutdown timers when fully charged.
This restores the existing behavior pre #9036
(c.f., https://github.com/koreader/koreader/pull/9258#issuecomment-1167672356)
* SDL: Unbreak the fake suspend behavior so that it actually works.
Tweak the default screensaver message to remind users that Power is bound to F2.
(Fix#9262)
* AutoSuspend: Re-engage suspend/shutdown timers on unplug.
This matters on Kobo, because the unexpected wakeup guard might have stopped the suspend timer.
Commonize fullscreen code across different devices.
Add fullscreen toggle on SDL desktop targets.
Expose the toggle to the dispatcher and map it to F11.
Hide touchmenu when resizing.
Allows the device to go into standby (if available in `/sys/power/state`) to save power.
Adds an entry in the device menu to tune the timeout for standby.
(Shows total standby- and suspend-time in system statistics.)
* Rejig frontlight warmth API to more closely match the existing API, and, hopefully, clarify some of its quirks, and reduce boilerplate and duplicate code in platform implementations.
* Tweak Kindle:setDateTime to prefer using the platform's custom script, as in interacts better with the stock UI. And make the fallbacks handle old busybox versions better.
* Add Kindle PW5 support ;).
* Add warmth support to the Kindle platform.
* Random TextBoxWidget cleanups: make sure we immediately free destroyed instances.
* FrontLightWidget: Refactor to make it slightly less obnoxious to grok and update; i.e., separate layout from update, and properly separate brightness from warmth handling. Move to simpler widgets instead of reinventing the wheel.
* TextBoxWidgets: Implement `setText` to match TextWidget's API, as some callers may be using the two interchangeably (i.e., Button).
* NaturalLightWidget: Make sure we pass a string to InputText
* InputText: Add debug guards to catch bad callers not passing strings ;).
FocusManager: fix round x use y layout
FocusManager: add tab and shift tab focus navigation support
FocusManager: handle Press key by default
FocusManager: make sure selected in instance level
FocusManager: add hold event support
FocusManager: Half move instead of edge move
FocusManager: add keymap override support
FocusManager: refocusWidget will delegate to parent FocusManager
Focusmanager: refocusWidget can execute on next tick
inputtext: can move out of focus on back
inputtext: fix cannot exit for non-touch device
inputtext: fix cannot input text with kindle dx physical keyboard
fontlightwidget: add non-touch support
datetimewidget: add non-touch support
datetimewidget: fix set date failed in kindle DX, fix datetimewidget month range to 1~23 by default
datetimewidget: make hour max value to 23
multiinputdialog: add non-touch support
checkbox: focusable and focus style
virtualkeyboard: no need to press two back to unfocus inputtext
virtualkeyboard: collect FocusManager event key names to let VirtualKeyboard disable them
openwithdialog: add non-touch support
inputdialog: can close via back button
enable all InputDialog and MultiInputDialog can be close by back
keyboardlayoutdialog: non-touch support
readertoc: non touch device can expand/collapse in toc
bookstatuswidget: non touch support
keyvaluepage: non-touch support
calendarview: non-touch support
Add a new reader module: ReaderScrolling, that exposes
some Scrolling options to the menu (which are to be used
by and implemented in ReaderPaging and ReaderRolling
themselves) and implement some inertial scrolling logic
used by both of them.
Default to "Classic scrolling" which is the expected
behaviour on phones and tablets.
The old CreDocument buggy behaviour is available as
"Turbo scrolling" for both Paging and Rolling documents.
Added a "On release scrolling" option that might be
useful on eInk to avoid dynamic pan/scrolling.
Try to avoid bad interactions between pan and swipe,
cancelling unwanted panning if we ended up doing a
swipe or multiswipe.
* Input: Don't create a new TimeVal object for input frame timestamps, just promote our existing table by assigning it the `TimeVal` metatable.
* TimeVal: Export (const) `zero` & `huge` TimeVal objects, because they're common enough in our codebase. (NOTE: not actually const, that's a Lua 5.4 feature ;p).
* GestureDetector: Explain the behavior of the `last_tevs` & `first_tevs` tables, and why one needs a new object and not the other.
* Speaking of, simplify the copy method for `first_tevs`, because it doesn't need to create a new TimeVal object, we can just reference the original, it's unique and re-assigned for each frame.
* LuaSettings/DocSettings: Updated readSetting API to allow proper initialization to default.
Use it to initialize tables, e.g., fixing corner-cases in readerFooter that could prevent settings from being saved.
(Fixes an issue reported on Gitter).
* LuaSettings/DocSettings: Add simpler API than the the flip* ones to toggle boolean settings.
* Update LuaSettings/DocSettigns usage throughout the codebase to use the dedicated boolean methods wher appropriate, and clean up some of the more mind-bending uses.
* FileChooser: Implement an extended default exclusion list (fix#2360)
* ScreenSaver: Refactor to avoid the pile of kludges this was threatening to become. Code should be easier to follow and use, and fallbacks now behave as expected (fix#4418).
platform: do not pass a directory on the command line.
The home directory will be properly set by Device.home_dir.
It was sometimes crashing when opened with no args.
Fixes: #7049
move state change event to higher level function so it will be called after powerd.is_fl_on is updated.
makes _setIntensity redundant so get rid of it
obsoletes #6667
Only with CreDocuments (as no way currently to highlight links
in PDFs).
Tab or Shift-Tab to select next or previous links.
Press to follow (or show footnote in popup, and in there Press
to follow), back to go back.
