* Device: Add a `hasSeamlessWifiToggle` devcap to complement `hasWifiToggle`, to denote platforms where we can toggle WiFi without losing focus, as this has obvious UX impacts, and less obvious technical impacts on some of the NetworkMgr innards...
* Android: Mark as `!hasSeamlessWifiToggle`, as it requires losing focus to the system settings. Moreover, `turnOnWifi` returns *immediately* and we *still* run in the background during that time, for extra spiciness...
* NetworkMgr: Ensure only *one* call to `turnOnWifi` will actually go on when stuff gets re-scheduled by the `beforeWifiAction` framework.
* NetworkMgr: Ensure the `beforeWifiAction` framework will not re-schedule the same thing *ad vitam aeternam* if a previous connection attempt is still ongoing. (i.e., previously, on Android, if you backed out of the system settings, you entered the Benny Hill dimension, as NetworkMgr would keep throwing you back into the system settings ;p). This has a few implications on callbacks requested by subsequent connection attempts, though. Generally, we'll try to honor *explicitly interactive* callbacks, but `beforeWifiAction` stuff will be dropped (only the original cb is preserved). That's what prevents the aforementioned infinite loop, as the `beforeWifiAction` framework was based on the assumption that `turnOnWifi` somewhat guaranteed `isConnected` to be true on return, something which is only actually true on `hasWifiManager` platforms.
* NetworkMgr: In `prompt` mode, the above implies that the prompt will not even be shown for concurrent attempts, as it's otherwise extremely confusing (KOSync on Android being a prime example, as it has a pair of Suspend/Resume handlers, so the initial attempt trips those two because of the focus switch >_<").
* NetworkMgr: Don't attempt to kill wifi when aborting a connection attempt on `!hasSeamlessWifiToggle` (because, again, it'll break UX, and also because it might run at very awkward times (e.g., I managed to go back to KOReader *between* a FM/Reader switch at one point, which promptly caused `UIManager` to exit because there was nothing to show ;p).
* NetworkMgr: Don't drop the connectivity callback when `beforeWifiAction` is set to prompt and the target happens to use a connectivity check in its `turnOnWifi` implementation (e.g., on Kindle).
* Android: Add an `"ignore"` `beforeWifiAction` mode, that'll do nothing but schedule the connectivity check with its callback (with the intent being the system will eventually enable wifi on its own Soon(TM)). If you're already online, the callback will run immediately, obviously. If you followed the early discussions on this PR, this closely matches what happens on `!hasWifiToggle` platforms (as flagging Android that way was one of the possible approaches here).
* NetworkMgr: Bail out early in `goOnlineToRun` if `beforeWifiAction` isn't `"turn_on"`. Prompt cannot work there, and while ignore technically could, it would serve very little purpose given its intended use case.
* KOSync: Neuter the Resume/Suspend handlers early on `CloseDocument`, as this is how focus switches are handled on Android, and if `beforeWifiAction` is `turn_on` and you were offline at the time, we'd trip them because of the swap to system settings to enable wifi.
* KOSync: Allow `auto_sync` to be enabled regardless of the `beforeWifiAction` mode on `!hasSeamlessWifiToggle` platforms. Prompt is still a terrible idea, but given that `goOnlineToRun` now aborts early if the mode is not supported, it's less of a problem.
Move as much of the state tracking as possible inside VirtualKeyboard itself.
InputDialog unfortunately needs an internal tracking of this state because it needs to know about it *before* the VK is shown, so we have to keep a bit of duplication in there, although we do try much harder to keep everything in sync (at least at function call edges), and to keep the damage contained to, essentially, the toggle button's handler.
(Followup to #10803 & #10850)
wpa_supplicant returns all non-ASCII SSIDs as raw bytes in the form
\x0a. We interpret these bytes as UTF-8, and make sure that all invalid
characters are replaced with a �.
Fix issue introduced by 976aaf5f: with full screen
text editor and hiding the keyboard, a tap in the
text area would show a new keyboard hiding the
buttons allowing to save/close the text editor,
getting us stuck there.
Makes more sense this way.
Re: #10828
Also clarify the UIManager "no dialogs left" message, and drop the
return value, as it's meaningless, we just want to break & return.
Assume the host system does things right otherwise.
Should be sane on Kindle
On PocketBook, who knows, but assuming the device actually suspends,
that should effectively kill our keepalive
Irrelevant for Android, as we skipped it because the wifi toggling
methods are interactive.
Fix#10823
(For reference, we *enable* wifi_was_on no matter *how* wifi is enabled,
but we only toggle it off when it's killed by a *direct* user interaction,
the intent being that if *something* non-interactive enabled wifi,
you'll probably silently need it on resume too).
As early as turnOnWifi.
Implement it on hasWifiManager platforms, preventing useless
connectivity checks to run when they're obviously never going to work
because you're out of range of your AP.
Also implemented a flag to notify the backend if the connection attempt
was interactive or not.
Right now, interactive is extremely restricted, it basically means the
menu checkmark, or a gesture.
The intent being that for stuff like the beforeWifiAction framework, we
don't want the backend to spawn extra UI.
Specifically, for hasWifiManager platforms, we no longer spawn the AP
scan list on failure unless the caller was interactive.
TL;DR: beforeWifiAction is now much less obnoxious when you're obviously
not able to connect.
MultiInputDialog does a close -> show in the same callback,
so if we don't actually keep it in sync with the actual state, we lose
the keyboard and essentially softlock the UI, which is Very Bad(TM).
NOTE: InputDialog has its own keyboard_hidden flag, and it looks...
fairly nightmarish.
Re #10743
Note that this only makes faulty switches slightly less annoying: for a
stuck switch, instead of a string of page turns, you'll get a single
missed page turn on the tap that actually releases the stuck contact...
The Kindle swipe animations & physical key inversion apply *everywhere*,
so we need this accessible in the FM, too.
Move it to Navigation, which is where it already was on !Touch devices.
we use it as text anyway and test if it is the empty string also.
this fixes a crash in viewhtml when holding a selector with an empty clipboard, we try to contcate getClipboardText which is nil (on !SDL & !Android)
And add an OTM block to do a cleanup pass on existing DBs (which might take a while if you're severely affected, because we've seen reports of DBs north of 2GB).
The ToC is no longer in the HTML we get from the
Wikipedia API. So, add it ourselves.
Also, as we can't get anywhere the Wikipedia localized
string for "Contents" (ie. "Sommaire" in French), use
thick <HR> to mark the start and end of this ToC.
* Notification: Drop the fencing from #10083; it never actually helped, and had subtle side-effects we could do without.
* VirtualKeyBoard: Flash on close, otherwise, some of the fast refresh glitches may be burned into the working buffer until a flash. Making sure we flash ourselves prevent it from sticking around on the page ;).
* util: Move `writeToSysfs` to base (i.e., `ffi/util`), as we need it there (and it actually makes more sense there anyway ;p).
* Bump base for https://github.com/koreader/koreader-base/pull/1645, which is where the actual workaround (hopefully) lives.
Re #8414, #9806, #10558
The HTML we get from Wikipedia has recently changed,
which has caused images to not be detected and shown
in DictQuickLookup, and to be missing or ugly in
saved EPUBs. Update our code and CSS to display them
again.
On long-press on the "Show matched stylesheets rules"
buttons, ignore those from our epub.css/html5.css and
from styletweaks, which may make investigating a book
style simpler without their noise.
- Add a toggle in Font settings> allowing showing font
ordered by most recently selected (long-press on
it allows clearing this history).
- Keep in G_reader_settings a list of known fonts, so
we can notice newly added user fonts, and put them
at the start of the most recently selected. Show
these new fonts with a symbol in the menu.
- TouchMenu: allows for a flag to trigger menu
refresh when going up.
* Enable before_wifi_action & after_wifi_action on hasWifiToggle platforms (which is basically all of 'em except naked SDL).
* Decouple restoreWifiAsync from hasWifiManger, because we can do that on other platforms (namely, Kindle. Probably PB, too, but WiFi is already a mess there, and I can't test it).
* Implement restoreWifiAsync on Kindle.
* Properly flag rM as hasWifiManager & hasFastWifiStatusQuery, because it is actually both of those (it uses our wpa_supplicant backend).
* Update the KOSync checks to take these changes into account, to properly disable auto_sync if necessary.
* Really made the Network* event signaling consistent. For realz this time.
* In an effort to make the whole beforeWifiAction framework somewhat usable there, we now assume connectivity is always available on !hasWifiToggle platforms...
NiLuJe
hius07
Wim de With
poire-z
yparitcher
zwim
weijiuqiao
ichnilatis-gr
Frans de Jonge
Glen Sawyer
Martín Fernández