* Try to make sure restoreWifiAsync eventually sends a NetworkConnected
event...
re: #5109
* Take a page from @shermp's book, and make sure wpa_supplicant managed to
connect to the AP before acquiring an IP.
Tear down WiFi modules in case of failure.
c.f., https://github.com/shermp/Kobo-UNCaGED/pull/21
* Don't let restore-wifi-async.sh enable WiFi behind our back when we're
killing it to start Nickel...
* Don't even call ping if there's no default gw
For some mysterious reason, I have a duplicate default gateway on my
Forma, one with no metrics, and a proper one.
This ensures we pick the proper one.
I'm fairly sure this is temporary insanity on the part of my device,
but, still, it can't hurt.
route -n:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0
0.0.0.0 192.168.0.1 0.0.0.0 UG 208 0 0 eth0
192.168.0.0 0.0.0.0 255.255.255.0 U 208 0 0 eth0
ip r:
default via 192.168.0.1 dev eth0
default via 192.168.0.1 dev eth0 metric 208
192.168.0.0/24 dev eth0 src 192.168.0.49 metric 208
Partially resolves#4747. Will enable switching Wi-Fi on/off in the menu and getting the network status. However, a new Wi-Fi session lasts ~100 seconds and then terminates automatically, apparently, to save the energy. I believe it can be prolonged by some networking activity. Also it is not shut down if the auto suspension is disabled.
* Double-checks that the connection was successful, and forcefully kills WiFi if it didn't, to avoid leaving stuff in an inconsistent state.
Should fix#2183
* Limit the turnOffWifi call to devices where it might make some sense to
do
* On Kobo, kill WiFi on startup if we detect an inconsistent state...
Untested, not terribly pretty.
The other solution is to slow down the Wi-Fi meny by doing the same
check for the "Wi-Fi connection" checkbox as in the later wifi_status
one...
* Don't enable auto_restore_wifi by default
It's liable to silently murder batteries for no good reason, given that
we prompt to enable WiFi by default when needed, and we otherwise have
no actual need to keep WiFi on in the background.
re #2215 (in particular, this directly contradicts @houqp in
https://github.com/koreader/koreader/pull/2215#discussion_r74696133 ;)).
Defines new function reconnectOrShowNetworkMenu(), which iterates over
available networks ordered by signal power, and check if we can connect
to saved SSIDs. If we can, then skip network list dialog.
TouchMenu: added options to menu items with the following defaults:
keep_menu_open = false
hold_keep_menu_open = true
So, default for Tap callback is to close menu, and for Hold callback
to keep menu open.
In both cases, provide the TouchMenu instance as the 1st argument to
the callback functions (instead of a refresh_menu_func I added in #3941)
so the callback can do more things, like closing, refreshing,
changing menu items text and re-ordering...
ReaderZooming: show symbol for default (like it was done for
ReaderFont, ReaderHyphenation...)
TextEditor plugin: update the previously opened files list in real
time, so the menu can be kept open and used as the TextEditor main
interface.
SSH plugin: keep menu open and update the Start/Stop state in real time
ReadTimer plugin: tried to do what feels right (but I don't use it)
Also remove forgotten cp in the move/paste file code
