Add a restricted but convenient mode showing BookMap like
in initial view, while still allowing chapter levels to be
tweaked. This allows getting back to this view with another
gesture to see the overall progress in the book, while
still having the normal BookMap in flat mode acting as
an alternative ToC.
Available as an action to associate to a gesture, and
with long-press on the "Book map" menu item.
Allows hairy-boxes amateurs to get small markers (under
the baseline) every 10 pages (with -/+ to get small or
medium markers, with optionally smaller ones every 5 pages).
Align page numbers (the vertical ones, on the left of
a BookMapRow) on the baseline of the BookMapRow, where
page slots rise from.
Also tweak the page number spike below the baseline used
in PageBrowser.
sometimes my kindle fires the rtc alarm a tad too late so use a more generous timeout
the real fix would be to have validateWakeupAlarmByProximity return differently if the alarm is past or in the future, but i am too lazy
Notification is a toast, so it doesn't stop event popagation.
If we don't disable thoses handlers inside Notification, we get spurious
duplicate handlers being fired ;).
Fix#10461
Export highlights for selected files.
Having a button "Select all files in folder", it is easy to export the whole folder.
So, closes#10402.
To keep even number of buttons, added a feature "Show selected files list". May be useful to check selections before an operation. Just a sorted list, no titlebar or popup menu, tapping a file jumps to its folder.
Make sure we only send Suspend/Resume events when we *actually* suspend/resume. This is done via the Device `_beforeSuspend`/`_afterResume` methods, and those were called by the *input handlers*, not the PM logic; which means they would fire, while the PM logic could actually take a smarter decision and *not* do what the event just sent implied ;).
(i.e., sleep with a cover -> suspend + actual suspend, OK; but if you then resume with a button -> input assumes resume, but PM will actually suspend again!).
Existing design issue made more apparent by #9448 ;).
Also fixes/generalizes a few corner-cases related to screen_saver_lock handling (e.g., don't allow USBMS during a lock).
And deal with the fallout of the main change to the Kobo frontlight ramp behavior ;).
Updating the selection queries the same page tens of times per second. This prevents KOReader from keeping up with high-frequency input event streams.
Fixes#10443. Relies on koreader/koreader-base#1612.
Happens in case the InputText field is emptied by the user.
The backend code makes rather strong assumptions that it'll *always* get a number of of it ;).
Fix#10352
Such states (not quite sure how you could actively get in such a broken state to begin with, mind you) could lead to an attempt to load an old fontlist cache in an incompatible format.
Re: #9771
Add a left button to the title bar to show the list
of results as a popup.
Dictionary: tap or long-press on that button give
different view of the results.
Wikipedia: request 30 results instead of 20, so we
can show 15, 10 or 6 of them per page of that popup.
With tall ButtonDialog with many rows, allows for a more
natural and readable scrolling without any truncated row
(like in Excel, we previously behave as web browsers).
ButtonTable:
- make the span and separator layout more explicite
- add some small horizontal padding when button text
is centered
When the containee is row-based, this can ensure that when
scrolling with swipes, we get the a full row at top, and
that any truncated row at top or bottom is fully visible
after a swipe.
The final height of a button could be different whether
a smaller font size or multiline end up being used.
Also fix 2-lines logical error making it less favored.
Also forward any lang property to the underlying text widgets.
Allow disabling the hall efect sensor via the sysfs knob, so the kindle system wont sleep & wake the device
for those of use that stay in koreader, are caseless and have get spurious wakeups
the footer can be toggled by gestures and menu, and should only be locked or skim in flipping mode when the footer is tapped
also allow toggling when only displaying the progress bar
rename to TapFooter to show it is not an event
Fixes: #10355
* Rewrite the loop mechanism to use scheduled tasks instead of a single blocking-ish subprocess.
* Change the actual logic to be more pleasing to the eye, especially on newer devices, as those *may* natively ramp on set; and fix a bad interaction with that behavior that could lead to no ramp at all on ramp down.
* Simplify Generic's Suspend handling to deal with the refresh ordering in a saner manner. The screensaver might be visible a tad longer than before this change before the frontlight actually ramps off.
Add a top left menu item -/+ to show none, only on the
first thumbnail of a row, or on all thumbnails.
Also make the page slot separator longer in the bottom
ribbon before pages that start a thumbnails row.
Also show a little spike in the bottom ribbon below page
slots that get their page number displayed, to ease
figuring out the connection.
Change algorithm to comparing all kv pairs.
Also ignore any pairs where the value is "" when computing
the alignment, since they usually are intended more as
a title and should not interfere.
Instead of firing on(Enter|Leave)Standby Events, and having every other piece of code that might care about that handle re-scheduling their stuff themselves; simply make the standby implementation (i.e., AutoSuspend's) shift the whole task queue by the amount of time spent in standby to re-sync everything automatically.
(This is necessary in the first place because Linux, as the task queue ticks in CLOCK_MONOTONIC, which does *not* tick during suspend/standby; while we expect most of the tasks scheduled to actually reflect real world clock delays).
Handle scroll by row or page a bit differently, so we dont
constrain and readjust the focus page when reaching book
start or end: when later scrolling in the other direction,
we'll find exactly the view as it was (this means that
we allow a single thumbnail in the view, but it's less
confusing this way).
When using the new option "Daily timeline starts at",
make the separator line between 23:00 and 00:00 thicker.
Also tweak time picker to pick minutes by units of 10,
and remove max hour (06:00) limitation.
this allows going back and forth from links (think of undo / redo)
when going back and no forward locations and when we are not on the same page as the last saved location, add the current location to the forward stack, helping if one goes back by mistake they can jump back to their current location
when going back and no forward locations and when we are not on the same page as the last saved location, add the current location to the forward stack, helping if one goes back by mistake they can jump back to thier current location
Split original very long help text (which was very
slow to display) into 2 parts: About... and Available
gestures.
Also add -/+ buttons to change things (which can already
and more practically be done with swipes along the edges)
to give a bit of meat to these menus.
When passing as 'anchor' a Geom object (ie. a widget dimen
or a ges.pos), or a function returning such an object,
a MovableContainer will be initially positionned near this
point/widget, instead of being centered on the screen.
Allow that for ButtonDialog and ButtonDialogTitle, so we
can make them behave as context menus (ie. for a titlebar
top left/right icons).
If buttons and their text would fit in a smaller width,
reduce the whole ButtonTable width.
May be used for properly sized context menus with
ButtonDialog, with the width required depending on
the translations for a language.
Make these 2 widget behave similarly, and don't rely on
ButtonTable default width for their own default width.
ButtonDialogTitle: also properly size its title.
Properly compute Button and separator widths,
instead of using magic numbers (which lost their
magic over the years :)
Ensure buttons and progress widgets are properly
aligned on the sides.
Move the optional Warmth "Configure" button in the
middle of Warmth Min and Max.
Fix keyboard navigation layout, which was not working
on devices with Warmth.
All our widgets are considering their provided 'width'
as the outer width, except Button which considered it
as some 'inner width', to which padding/border/margin
were added. Let's have them all consistent.
Some other widgets using Button had tweaks to account
for that odd behaviour: fix and simplify them.
Also fix Button layout when text is left aligned.
For example, to determine whether the Japanese or Chinese form should be shown.
* Dictionaries.lua - use iso3 codes everywhere
readerdictionary.lua - convert iso to bcp tag, to construct ifo_lang
isolanguage.lua - map from iso3 to full language name, map from iso3 to bcp language tag
* Make the full language names translatable
* Store ifo information from dictionaries.lua in downloaded dictionaries
Move View html code from ReaderHighlight to a new
dedicated module.
Long-press on an element or its text in the HTML will
show a popup with a list of selectors related to this
element that can be copied to clipboard (to be pasted
in Find or in a Book style tweak).
2 addtional buttons in this popup allow seeing all the
CSS rulesets in all stylesheets that would be matched by
this element, which should make it easier understanding
the publisher stylesheets and using or creating style
tweaks.
As done in DictQuickLookup (more event handlers are
needed to cohabitate well with MovableContainer).
By default, selected word or text is copied to clipboard.
Also provide indexes to any long-press callback, as we'll
need them for View HTML.
- Fix sorting folders when collate is "type", "size", "percentage":
folders are sorted by name now.
- Fix getting next file in folder when collate is "mixed files and
folders": returned nil when next item was a folder.
Add a dedicated handler to handle mixed pen + panel, when panel sends both mt + st and stylus only st
Don't stomp on panel slots in the Wacom protocol handler
Get rid of a few superfluous nil guards
Return early in the EV_KEY handler for touch-related events (i.e., BTN_)
- AutoFrontlight plugin: update checkmark on toggling
- KeepAlive plugin: update checkmark on toggling
- ReaderPageMap: font size menu entry
- ReaderStatus, common_settings_menu_table: book status "read" -> "finished"
* Add thinspaces between d/h/m/s
* Remove lead zeros
* Make letter `d` for days translatable
* Make thinspace into hairspace when compact
* Adjust and add unit tests
Some devices don't ship with iproute2 compatible tools, but may ship
with net-tools compatible ones.
Unify code w/ SDL's similar codepaths for its NetworkMgr:isConnected
implementation
Only available with EPUBs containing 2 or more fragments,
and a file size large enough to ensure a cache file is used.
The idea is simply, on any rendering setting change, to
skip the rerendering of the full book and to defer any
rerendering to the moment we draw a DocFragment, and
render only it.
So, on a setting change, only the fragment containing the
current page will be rerendered, and the new fragments we
may cross while turning pages.
When having done so, KOReader is in a degraded state (the
full page count is incorrect, the ToC is invalid...).
So, a full rerendering is needed, and one will happen
in the background, and when the user is idle, we reload
seamlessly and quickly from the cache file it has made.
ReaderFlipping will show some icons in the top left
corner to let it know at which steps in this procress
we are.
Also don't propagate tap/hold on disabled menu items.
(When top and bottom menu displayed at the same time,
tap on a disabled top menu item could active some
bottom toggle change.)
The previous iteration, besides failing to handle leaf-only input,
was relying on splitFilePathName, which just doesn't do what's required
to incrementally build the directory tree the right way around ;).
This should more closely match mkdir -p, i.e., it will *fail* if any
part (or all of it) of the path exists but is *not* a directory.
Re #10074
- filemanagerutil.resetDocumentSettings()'s doc_settings:close() -> doc_settings:flush()
- Remove current_status from filemanagerutil.getStatusButtonsRow() args, get it inside from file
- Move genStatusButton() inside filemanagerutil.getStatusButtonsRow()
- Move "Reset settings" button generation to filemanagerutil
- Rename "Reset settings" button to "Reset" and update popup box text
- Disable "Reset settings" for file if it's currently open in Collections (same as History)
hius07
poire-z
NiLuJe
yparitcher
ElimGarak1
Sunny
roshavagarga
hrdl
Frans de Jonge
John Hackett
kpopconnoisseur
zwim
weijiuqiao
nairyo
melyux
ichnilatis-gr
Andrej Shadura