git-secret/vendor/bats-core/docs/source/writing-tests.md

# Writing tests

Each Bats test file is evaluated _n+1_ times, where _n_ is the number of
test cases in the file. The first run counts the number of test cases,
then iterates over the test cases and executes each one in its own
process.

For more details about how Bats evaluates test files, see [Bats Evaluation
Process][bats-eval] on the wiki.

For sample test files, see [examples](https://github.com/bats-core/bats-core/tree/master/docs/examples).

[bats-eval]: https://github.com/bats-core/bats-core/wiki/Bats-Evaluation-Process

## `run`: Test other commands

Many Bats tests need to run a command and then make assertions about its exit
status and output. Bats includes a `run` helper that invokes its arguments as a
command, saves the exit status and output into special global variables, and
then returns with a `0` status code so you can continue to make assertions in
your test case.

For example, let's say you're testing that the `foo` command, when passed a
nonexistent filename, exits with a `1` status code and prints an error message.

```bash
@test "invoking foo with a nonexistent file prints an error" {
  run foo nonexistent_filename
  [ "$status" -eq 1 ]
  [ "$output" = "foo: no such file 'nonexistent_filename'" ]
  [ "$BATS_RUN_COMMAND" = "foo nonexistent_filename" ]

}
```

The `$status` variable contains the status code of the command, the
`$output` variable contains the combined contents of the command's standard
output and standard error streams, and the `$BATS_RUN_COMMAND` string contains the
command and command arguments passed to `run` for execution.

If invoked with one of the following as the first argument, `run`
will perform an implicit check on the exit status of the invoked command:

```pre
    =N  expect exit status N (0-255), fail if otherwise
    ! expect nonzero exit status (1-255), fail if command succeeds
```

We can then write the above more elegantly as:

```bash
@test "invoking foo with a nonexistent file prints an error" {
  run -1 foo nonexistent_filename
  [ "$output" = "foo: no such file 'nonexistent_filename'" ]
}
```

A third special variable, the `$lines` array, is available for easily accessing
individual lines of output. For example, if you want to test that invoking `foo`
without any arguments prints usage information on the first line:

```bash
@test "invoking foo without arguments prints usage" {
  run -1 foo
  [ "${lines[0]}" = "usage: foo <filename>" ]
}
```

__Note:__ The `run` helper executes its argument(s) in a subshell, so if
writing tests against environmental side-effects like a variable's value
being changed, these changes will not persist after `run` completes.

By default `run` leaves out empty lines in `${lines[@]}`. Use
`run --keep-empty-lines` to retain them.

Additionally, you can use `--separate-stderr` to split stdout and stderr
into `$output`/`$stderr` and `${lines[@]}`/`${stderr_lines[@]}`.

All additional parameters to run should come before the command.
If you want to run a command that starts with `-`, prefix it with `--` to
prevent `run` from parsing it as an option.

## Comment syntax

External tools (like `shellcheck`, `shfmt`, and various IDE's) may not support
the standard `.bats` syntax.  Because of this, we provide a valid `bash`
alternative:

```bash
function invoking_foo_without_arguments_prints_usage { #@test
  run foo
  [ "$status" -eq 1 ]
  [ "${lines[0]}" = "usage: foo <filename>" ]
}
```

When using this syntax, the function name will be the title in the result output
and the value checked when using `--filter`.

## `load`: Share common code

You may want to share common code across multiple test files. Bats includes a
convenient `load` command for sourcing a Bash source file relative to the
location of the current test file. For example, if you have a Bats test in
`test/foo.bats`, the command

```bash
load test_helper.bash
```

will source the script `test/test_helper.bash` in your test file (limitations
apply, see below). This can be useful for sharing functions to set up your
environment or load fixtures. `load` delegates to Bash's `source` command after
resolving relative paths.

As pointed out by @iatrou in <https://www.tldp.org/LDP/abs/html/declareref.html>,
using the `declare` builtin restricts scope of a variable. Thus, since actual
`source`-ing is performed in context of the `load` function, `declare`d symbols
will _not_ be made available to callers of `load`.

> For backwards compatibility `load` first searches for a file ending in
> `.bash` (e.g. `load test_helper` searches for `test_helper.bash` before
> it looks for `test_helper`). This behaviour is deprecated and subject to
> change, please use exact filenames instead.

## `skip`: Easily skip tests

Tests can be skipped by using the `skip` command at the point in a test you wish
to skip.

```bash
@test "A test I don't want to execute for now" {
  skip
  run foo
  [ "$status" -eq 0 ]
}
```

Optionally, you may include a reason for skipping:

```bash
@test "A test I don't want to execute for now" {
  skip "This command will return zero soon, but not now"
  run foo
  [ "$status" -eq 0 ]
}
```

Or you can skip conditionally:

```bash
@test "A test which should run" {
  if [ foo != bar ]; then
    skip "foo isn't bar"
  fi

  run foo
  [ "$status" -eq 0 ]
}
```

__Note:__ `setup` and `teardown` hooks still run for skipped tests.

## `setup` and `teardown`: Pre- and post-test hooks

You can define special `setup` and `teardown` functions, which run before and
after each test case, respectively. Use these to load fixtures, set up your
environment, and clean up when you're done.

You can also define `setup_file` and `teardown_file`, which will run once before the first test's `setup` and after the last test's `teardown` for the containing file. Variables that are exported in `setup_file` will be visible to all following functions (`setup`, the test itself, `teardown`, `teardown_file`).

<!-- markdownlint-disable  MD033 -->
<details>
  <summary>Example of setup/setup_file/teardown/teardown_file call order</summary>
For example the following call order would result from two files (file 1 with tests 1 and 2, and file 2 with test3) beeing tested:

```text
setup_file # from file 1, on entering file 1
  setup
    test1
  teardown
  setup
    test2
  teardown
teardown_file # from file 1, on leaving file 1
setup_file # from file 2,  on enter file 2
  setup
    test3
  teardown
teardown_file # from file 2,  on leaving file 2
```

</details>
<!-- markdownlint-enable MD033 -->

## Code outside of test cases

You can include code in your test file outside of `@test` functions.  For
example, this may be useful if you want to check for dependencies and fail
immediately if they're not present. However, any output that you print in code
outside of `@test`, `setup` or `teardown` functions must be redirected to
`stderr` (`>&2`). Otherwise, the output may cause Bats to fail by polluting the
TAP stream on `stdout`.

## File descriptor 3 (read this if Bats hangs)

Bats makes a separation between output from the code under test and output that
forms the TAP stream (which is produced by Bats internals). This is done in
order to produce TAP-compliant output. In the [Printing to the
terminal](#printing-to-the-terminal) section, there are details on how to use
file descriptor 3 to print custom text properly.

A side effect of using file descriptor 3 is that, under some circumstances, it
can cause Bats to block and execution to seem dead without reason. This can
happen if a child process is spawned in the background from a test. In this
case, the child process will inherit file descriptor 3. Bats, as the parent
process, will wait for the file descriptor to be closed by the child process
before continuing execution. If the child process takes a lot of time to
complete (eg if the child process is a `sleep 100` command or a background
service that will run indefinitely), Bats will be similarly blocked for the same
amount of time.

**To prevent this from happening, close FD 3 explicitly when running any command
that may launch long-running child processes**, e.g. `command_name 3>&-` .

## Printing to the terminal

Bats produces output compliant with [version 12 of the TAP protocol][TAP]. The
produced TAP stream is by default piped to a pretty formatter for human
consumption, but if Bats is called with the `-t` flag, then the TAP stream is
directly printed to the console.

This has implications if you try to print custom text to the terminal. As
mentioned in [File descriptor 3](#file-descriptor-3-read-this-if-bats-hangs),
bats provides a special file descriptor, `&3`, that you should use to print
your custom text. Here are some detailed guidelines to refer to:

- Printing **from within a test function**:
  - First you should consider if you want the text to be always visible or only
    when the test fails. Text that is output directly to stdout or stderr (file
    descriptor 1 or 2), ie `echo 'text'` is considered part of the test function
    output and is printed only on test failures for diagnostic purposes,
    regardless of the formatter used (TAP or pretty).
  - To have text printed unconditionally from within a test function you need to
    redirect the output to file descriptor 3, eg `echo 'text' >&3`. This output
    will become part of the TAP stream. You are encouraged to prepend text printed
    this way with a hash (eg `echo '# text' >&3`) in order to produce 100% TAP compliant
    output. Otherwise, depending on the 3rd-party tools you use to analyze the
    TAP stream, you can encounter unexpected behavior or errors.

- Printing **from within the `setup` or `teardown` functions**: The same hold
  true as for printing with test functions.

- Printing **outside test or `setup`/`teardown` functions**:
  - Regardless of where text is redirected to (stdout, stderr or file descriptor
    3) text is immediately visible in the terminal.

  - Text printed in such a way, will disable pretty formatting. Also, it will
    make output non-compliant with the TAP spec. The reason for this is that
    each test file is evaluated n+1 times (as mentioned
    [earlier](#writing-tests)). The first run will cause such output to be
    produced before the [_plan line_][tap-plan] is printed, contrary to the spec
    that requires the _plan line_ to be either the first or the last line of the
    output.

  - Due to internal pipes/redirects, output to stderr is always printed first.

[tap-plan]: https://testanything.org/tap-specification.html#the-plan

## Special variables

There are several global variables you can use to introspect on Bats tests:

- `$BATS_RUN_COMMAND` is the run command used in your test case.
- `$BATS_TEST_FILENAME` is the fully expanded path to the Bats test file.
- `$BATS_TEST_DIRNAME` is the directory in which the Bats test file is located.
- `$BATS_TEST_NAMES` is an array of function names for each test case.
- `$BATS_TEST_NAME` is the name of the function containing the current test case.
- `$BATS_TEST_DESCRIPTION` is the description of the current test case.
- `$BATS_TEST_NUMBER` is the (1-based) index of the current test case in the test file.
- `$BATS_SUITE_TEST_NUMBER` is the (1-based) index of the current test case in the test suite (over all files).
- `$BATS_TMPDIR` is the base temporary directory used by bats to create its
   temporary files / directories.
   (default: `$TMPDIR`. If `$TMPDIR` is not set, `/tmp` is used.)
- `$BATS_RUN_TMPDIR` is the location to the temporary directory used by bats to
   store all its internal temporary files during the tests.
   (default: `$BATS_TMPDIR/bats-run-$BATS_ROOT_PID-XXXXXX`)
- `$BATS_FILE_EXTENSION` (default: `bats`) specifies the extension of test files that should be found when running a suite (via `bats [-r] suite_folder/`)
- `$BATS_SUITE_TMPDIR` is a temporary directory common to all tests of a suite.
  Could be used to create files required by multiple tests.
- `$BATS_FILE_TMPDIR` is a temporary directory common to all tests of a test file.
  Could be used to create files required by multiple tests in the same test file.
- `$BATS_TEST_TMPDIR` is a temporary directory unique for each test.
  Could be used to create files required only for specific tests.

## Libraries and Add-ons

Bats supports loading external assertion libraries and helpers. Those under `bats-core` are officially supported libraries (integration tests welcome!):

- <https://github.com/bats-core/bats-assert> - common assertions for Bats
- <https://github.com/bats-core/bats-support> - supporting library for Bats test helpers
- <https://github.com/bats-core/bats-file> - common filesystem assertions for Bats
- <https://github.com/bats-core/bats-detik> - e2e tests of applications in K8s environments

and some external libraries, supported on a "best-effort" basis:

- <https://github.com/ztombol/bats-docs> (still relevant? Requires review)
- <https://github.com/grayhemp/bats-mock> (as per #147)
- <https://github.com/jasonkarns/bats-mock> (how is this different from grayhemp/bats-mock?)