Fisher

Fisher is a package manager for the fish shell. It defines a common interface for package authors to build and distribute shell scripts in a portable way. You can use it to extend your shell capabilities, change the look of your prompt and create repeatable configurations across different systems effortlessly.

Here's why you'll love Fisher:

• Zero configuration.
• Oh My Fish! package support.
• Blazing fast concurrent package downloads.
• Cached downloads—if you've installed a package before, you can install it again offline!
• Add, update and remove functions, completions, key bindings, and configuration snippets from a variety of sources using the command line, editing your fishfile or both.

Looking for packages? Browse the curated collection at git.io/awesome-fish.

Installation

Download fisher.fish to your functions directory or any directory on your function path.

curl https://git.io/fisher --create-dirs -sLo ~/.config/fish/functions/fisher.fish

Your shell can take a few seconds before loading newly added functions. If the fisher command is not immediately available, launch a new session or replace the running shell with a new one.

System Requirements

• fish 2.2+
• curl 7.10.3+
• git 1.7.12+

Stuck in fish 2.0 and can't upgrade your shell? Check our legacy fish support guide and good luck!

Bootstrap installation

To automate the installation process on a new system, installing packages listed in your fishfile, add the following code to your fish configuration file.

if not functions -q fisher
    set -q XDG_CONFIG_HOME; or set XDG_CONFIG_HOME ~/.config
    curl https://git.io/fisher --create-dirs -sLo $XDG_CONFIG_HOME/fish/functions/fisher.fish
    fish -c fisher
end

Changing the installation prefix

Use the $fisher_path environment variable to change the location where functions, completions, and configuration snippets will be copied to when a package is installed. The default location will be your fish configuration directory.

Note

: Do I need this? If you want to keep your own functions, completions, and configuration snippets separate from packages installed with Fisher, customize the installation prefix. If you prefer to keep everything in the same place, you can skip this.

set -g fisher_path /path/to/another/location

set fish_function_path $fish_function_path[1] $fisher_path/functions $fish_function_path[2..-1]
set fish_complete_path $fish_complete_path[1] $fisher_path/completions $fish_complete_path[2..-1]

for file in $fisher_path/conf.d/*.fish
    builtin source $file 2> /dev/null
end

Getting started

You've found an interesting utility you'd like to try out. Or maybe you've created a package yourself. How do you install it on your system? How do update or remove it?

You can use Fisher to add, update, and remove packages interactively, taking advantage of fish tab completion and syntax highlighting. Or edit your fishfile and commit your changes. Do you prefer a CLI-centered approach, text-based approach, or a mix of both?

Adding packages

Add packages using the add command followed by the path to the repository on GitHub.

fisher add jethrokuan/z rafaelrinaldi/pure

To add a package from a different location, use the address of the server and the path to the repository. HTTPS is always assumed, so you don't need to write the protocol.

fisher add gitlab.com/jorgebucaran/kraken

To add a package from a private repository set the fisher_user_api_token variable to your username followed by a colon and your authorization token or password.

set -g fisher_user_api_token jorgebucaran:ce04da9bd93ddb5e729cfff4a58c226322c8d142

For a specific version of a package add an @ symbol after the package name followed by the tag, branch or commit-ish. Only one package version can be installed at any given time.

fisher add edc/bass@20f73ef jethrokuan/z@pre27

You can add packages from a local directory too. Local packages are installed as symbolic links so changes in the original files will be reflected in future shell sessions without having to re-run fisher.

fisher add ~/path/to/local/pkg

Listing packages

List all the packages that are currently installed using the ls command. This doesn't show package dependencies.

fisher ls
jethrokuan/z
rafaelrinaldi/pure
gitlab.com/jorgebucaran/kraken
edc/bass
~/path/to/myfish/pkg

You can use a regular expression after ls to refine the output.

fisher ls "^gitlab|fish-.*"

Removing packages

Remove packages using the rm command. If a package has dependencies, they too will be removed. If any dependencies are still shared by other packages, they will remain installed.

fisher rm rafaelrinaldi/pure

You can remove everything that is currently installed in one sweep using the following pipeline.

fisher ls | fisher rm

Updating packages

Run fisher to update everything that is currently installed. There is no dedicated update command. Using the command line to add and remove packages is a quick way to modify and commit changes to your fishfile in a single step.

Looking for a way to update fisher itself? Use the self-update command.

fisher self-update

Other commands

Use the --help command to display usage help on the command line.

fisher --help

Last but not least, use the --version command to display the current version of Fisher.

fisher --version

Using the fishfile

Whenever you add or remove a package from the command-line, Fisher writes the exact list of installed packages to ~/.config/fish/fishfile. This is your fishfile. Add this file to your dotfiles or version control in order to reproduce your configuration on a different system.

You can also edit this file and run fisher to commit your changes. Only the packages listed in this file will be installed (or remained installed) after fisher returns. If a package is already installed, it will be updated. Everything after a # symbol will be ignored.

vi ~/.config/fish/fishfile

- rafaelrinaldi/pure
- jethrokuan/z@pre27
gitlab.com/jorgebucaran/kraken
edc/bass
+ FabioAntunes/fish-nvm
~/path/to/myfish/pkg

fisher

That will remove rafaelrinaldi/pure and jethrokuan/z, add FabioAntunes/fish-nvm and update the rest.

Digging deeper

What is a package?

Packages help you organize shell scripts into reusable, independent components that can be shared through a git URL or the path to a local directory. Even if your package is not meant to be shared with others, you can benefit from composition and the ability to depend on other packages.

The structure of a package can be adopted from the fictional project described below. These are the files that Fisher looks for when installing or uninstalling a package. The name of the root directory can be anything you like.

fish-kraken
├── fishfile
├── functions
│   └── kraken.fish
├── completions
│   └── kraken.fish
└── conf.d
    └── kraken.fish

If your project depends on other packages, it should list them as dependencies in a fishfile. There is no need for a fishfile otherwise. The rules concerning the usage of the fishfile are the same rules we've already covered in using the fishfile.

While some packages contain every kind of file, some packages include only functions or configuration snippets. You are not limited to a single file per directory either. There can be as many files as you need or just one as in the following example.

fish-kraken
└── kraken.fish

The lack of private scope in fish causes all package functions to share the same namespace. A good rule of thumb is to prefix functions intended for private use with the name of your package to prevent conflicts.

Creating your own package

The best way to show you how to create your own package is by building one together. Our first example will be a function that prints the raw non-rendered markdown source of a README file from GitHub to standard output. Its inputs will be the name of the owner, repository, and branch. If no branch is specified, we'll use the master branch.

Create the following directory structure and function file. Make sure the function name matches the file name; otherwise fish won't be able to autoload it the first time you try to use it.

fish-readme
└── readme.fish

function readme -a owner repo branch
    if test -z "$branch"
        set branch master
    end
    curl -s https://raw.githubusercontent.com/$owner/$repo/$branch/README.md
end

You can install it with the add command followed by the path to the directory.

fisher add /absolute/path/to/fish-readme

The next logical step is to share it with others. How do you do that? Fisher is not a package registry. Its function is to fetch fish scripts and put them in place so that your shell can find them. To publish a package put your code on GitHub, GitLab, BitBucket, or anywhere you like.

Now let's install the package from the internet. Open your fishfile and replace the local version of the package you added with the URL of the repository. Save your changes and run fisher.

- /absolute/path/to/fish-readme
+ gitlab.com/jorgebucaran/fish-readme

fisher

You can leave off the github.com part of the URL when adding or removing packages hosted on GitHub. If your package is hosted anywhere else, the address of the server is required.

Configuration snippets

Configuration snippets consist of all the fish files inside your ~/.config/fish/conf.d directory. They run on shell startup and generally used to set environment variables, add new key bindings, etc.

Unlike functions or completions which can be erased programmatically, we can't undo a fish file that has been sourced without creating a new shell session. For this reason, packages that use configuration snippets provide custom uninstall logic through an uninstall event handler.

Let's walk through an example that uses this feature to add a new key binding for the Control-G sequence. Let's say we want to use it to open the fishfile in the vi editor quickly. When you install the package, fishfile_quick_edit_key_bindings.fish will be sourced, adding the specified key binding and loading the event handler function. When you uninstall it, Fisher will emit an uninstall event.

fish-fishfile-quick-edit
└── conf.d
    └── fishfile_quick_edit_key_bindings.fish

bind \cg "vi ~/.config/fish/fishfile"

set -l name (basename (status -f) .fish){_uninstall}

function $name --event $name
    bind --erase \cg
end

Uninstalling

You want to know how to remove this package manager and everything you've installed with it. No problem. This command will delete all packages, cache, configuration, and related files.

fisher self-uninstall

License

MIT