/* * This file contains patch control flags. * * In principle you should be able to mix and match any patches * you may want. In cases where patches are logically incompatible * one patch may take precedence over the other as noted in the * relevant descriptions. * * Although layouts typically come as patches they are differentiated * here for grouping purposes. */ /* Patches */ /* The alpha patch adds transparency for the status bar. * https://dwm.suckless.org/patches/alpha/ */ #define ALPHA_PATCH 0 /* This patch adds new clients above the selected client, instead of always * becoming the new master. This behaviour is known from Xmonad. * This patch takes precedence over ATTACHASIDE_PATCH. * https://dwm.suckless.org/patches/attachabove/ */ #define ATTACHABOVE_PATCH 0 /* This patch adds new clients on top of the stack. * This patch takes precedence over ATTACHBELOW_PATCH. * https://dwm.suckless.org/patches/attachaside/ */ #define ATTACHASIDE_PATCH 0 /* This patch adds new clients below the selected client. * This patch takes precedence over ATTACHBOTTOM_PATCH. * https://dwm.suckless.org/patches/attachbelow/ */ #define ATTACHBELOW_PATCH 0 /* This patch adds new clients at the bottom of the stack. * https://dwm.suckless.org/patches/attachbottom/ */ #define ATTACHBOTTOM_PATCH 0 /* This patch will make dwm run "~/.config/dwm/autostart_blocking.sh" and * "~/.config/dwm/autostart.sh &" before entering the handler loop. One or * both of these files can be ommited. Note the path inside .config rather * than the original ~/.dwm folder. * https://dwm.suckless.org/patches/autostart/ */ #define AUTOSTART_PATCH 0 /* This patch adds an iscentered rule to automatically center clients on the current monitor. * https://dwm.suckless.org/patches/center/ */ #define CENTER_PATCH 0 /* This patch provides the ability to assign different weights to clients in their * respective stack in tiled layout. * https://dwm.suckless.org/patches/cfacts/ */ #define CFACTS_PATCH 0 /* The cyclelayouts patch lets you cycle through all your layouts. * https://dwm.suckless.org/patches/cyclelayouts/ */ #define CYCLELAYOUTS_PATCH 0 /* This patch shows the titles of all visible windows in the status bar * (as opposed to showing only the selected one). * https://dwm.suckless.org/patches/fancybar/ */ #define FANCYBAR_PATCH 0 /* By default, dwm responds to _NET_ACTIVE_WINDOW client messages by setting * the urgency bit on the named window. This patch activates the window instead. * https://dwm.suckless.org/patches/focusonnetactive/ */ #define FOCUSONNETACTIVE_PATCH 0 /* By default in dwm it is possible to make an application fullscreen, then use * the focusstack keybindings to focus on other windows beneath the current window. * It is also possible to spawn new windows (e.g. a terminal) that end up getting * focus while the previous window remains in fullscreen. This patch ensures that * in such scenarios the previous window loses fullscreen. * https://github.com/bakkeby/dwm-vanitygaps/blob/master/patches/dwm-losefullscreen-6.2.diff */ #define LOSEFULLSCREEN_PATCH 0 /* The pertag patch adds nmaster, mfacts and layouts per tag rather * than per monitor (default). * https://dwm.suckless.org/patches/pertag/ */ #define PERTAG_PATCH 0 /* This controls whether or not to also store bar position on a per * tag basis, or leave it as one bar per monitor. */ #define PERTAGBAR_PATCH 0 /* By default, windows only resize from the bottom right corner. With this * patch the mouse is warped to the nearest corner and you resize from there. * https://dwm.suckless.org/patches/resizecorners/ */ #define RESIZECORNERS_PATCH 0 /* This patch let's you rotate through the stack using keyboard shortcuts. * https://dwm.suckless.org/patches/rotatestack/ */ #define ROTATESTACK_PATCH 0 /* This patch aves size and position of every floating window before it is forced * into tiled mode. If the window is made floating again then the old dimensions * will be restored. * https://dwm.suckless.org/patches/save_floats/ */ #define SAVEFLOATS_PATCH 0 /* This patch adds configuration options for horizontal and vertical padding in the status bar. * https://dwm.suckless.org/patches/statuspadding/ */ #define STATUSPADDING_PATCH 0 /* The systray patch adds systray for the status bar. * https://dwm.suckless.org/patches/systray/ */ #define SYSTRAY_PATCH 0 /* By default dwm allow you to set application specific rules so that you can have your browser, * for example, start up on tag 9 optionally on a given monitor when you open your browser it is * then automatically moved to the configured tag, but you have to manually enable the tag to see * the newly opened application. * This patch adds an extra configuration option for individual rules where: * 0 is default behaviour * 1 automatically moves you to the tag of the newly opened application and * 2 enables the tag of the newly opened application in addition to your existing enabled tags * https://github.com/bakkeby/dwm-vanitygaps/blob/master/patches/dwm-switchtag-6.2.diff */ #define SWITCHTAG_PATCH 0 /* This patch allows you to move all visible windows on a monitor to an adjacent monitor. * https://github.com/bakkeby/dwm-vanitygaps/blob/master/patches/dwm-tagallmon-6.2.diff */ #define TAGALLMON_PATCH 0 /* If you try to send a fullscreen window to an adjacent monitor using tagmon then * the window is moved behind the scenes, but it remains in fullscreen on the original * monitor until you exit fullscreen view (at which point it will appear on the adjacent * monitor). This patch allows a fullscreen window to be moved to an adjacent monitor * while remaining in fullscreen. * https://github.com/bakkeby/dwm-vanitygaps/blob/master/patches/dwm-tagmonfixfs-6.2.diff */ #define TAGMONFIXFS_PATCH 0 /* This patch allows you to swap all visible windows on one monitor with those of an * adjacent monitor. * https://github.com/bakkeby/dwm-vanitygaps/blob/master/patches/dwm-tagswapmon-6.2.diff */ #define TAGSWAPMON_PATCH 0 /* This patch allows you to toggle fullscreen on and off using a single shortcut key. * https://github.com/bakkeby/dwm-vanitygaps/blob/master/patches/dwm-togglefullscreen-6.2.diff */ #define TOGGLEFULLSCREEN_PATCH 0 /* This patch adds configurable gaps between windows differentiating between outer, inner, * horizontal and vertical gaps. * https://github.com/bakkeby/dwm-vanitygaps/blob/master/patches/dwm-vanitygaps-6.2.diff * https://github.com/bakkeby/dwm-vanitygaps/blob/master/patches/dwm-vanitygaps-cfacts-6.2.diff */ #define VANITYGAPS_PATCH 0 /* Sometimes a single application opens different windows depending on the task * at hand and this is often reflected in the WM_WINDOW_ROLE(STRING) x property. * This patch adds the role field to the rule configuration so that one can * differentiate between, say, Firefox "browser" vs "Preferences" vs "Manager" * or Google-chrome "browser" vs "pop-up". * https://github.com/bakkeby/dwm-vanitygaps/blob/master/patches/dwm-windowrolerule-6.2.diff */ #define WINDOWROLERULE_PATCH 0 /* The zoomswap patch allows a master and a stack window to swap places * rather than every window on the screen changing position. * https://dwm.suckless.org/patches/zoomswap/ */ #define ZOOMSWAP_PATCH 0 /* Layouts */ /* Bottomstack layout. * https://dwm.suckless.org/patches/bottomstack/ */ #define BSTACK_LAYOUT 0 /* Bottomstack horizontal layout. * https://dwm.suckless.org/patches/bottomstack/ */ #define BSTACKHORIZ_LAYOUT 0 /* Deck layout. * https://dwm.suckless.org/patches/deck/ */ #define DECK_LAYOUT 0 /* Fibonacci dwindle layout. * https://dwm.suckless.org/patches/fibonacci/ */ #define FIBONACCI_DWINDLE_LAYOUT 0 /* Fibonacci spiral layout. * https://dwm.suckless.org/patches/fibonacci/ */ #define FIBONACCI_SPIRAL_LAYOUT 0 /* Gappless grid layout. * https://dwm.suckless.org/patches/gaplessgrid/ */ #define GAPPLESSGRID_LAYOUT 0 /* Gridmode (grid) layout. * https://dwm.suckless.org/patches/gridmode/ */ #define GRIDMODE_LAYOUT 0 /* Horizontal grid (horizgrid) layout. * https://dwm.suckless.org/patches/horizgrid/ */ #define HORIZGRID_LAYOUT 0 /* Grid layout where nmaster controls the number of rows. * https://dwm.suckless.org/patches/nrowgrid/ */ #define NROWGRID_LAYOUT 0 /* The default tile layout. * This can be optionally disabled in favour of other layouts. */ #define TILE_LAYOUT 1 /* Monocle layout (default). * This can be optionally disabled in favour of other layouts. */ #define MONOCLE_LAYOUT 1