# Project moved to [Pillz Mod](https://github.com/dcpedit/pillzmod)
This project has been replaced by Pillz Mod: https://github.com/dcpedit/pillzmod
# KinT Blackpill Edition
This is a fork of Michael Stapelberg's [KinT project](https://github.com/kinx-project/kint) with the following modifications:
* Replaced Teensy with STM32F411 Blackpill controller (`blackpill` directory)
* Reduced PCB size to 100 x 86 mm
* Use Vial firmware. Source code is in my [fork of Vial](https://github.com/dcpedit/vial-qmk-dev/tree/vial/keyboards/dcpedit/kint_bp)
## Files for JLCPCB
Located in the directory `/blackpill/production`
## Parts for Build
| Component | Qty | Notes |
| --------- | --- | ----- |
| SMD LEDs | 4 | Can be any color [Link](https://octopart.com/apt3216qbc%2Fd-kingbright-5355642?r=sp)
| SMD 10k resistors | 4 | [Link](https://octopart.com/crcw120610k0fkeac-vishay-20811529)
| Molex 13 pin connectors| 4-6 | Needed if you don't want to desolder old ones [Link](https://octopart.com/39-53-2135-molex-7670149?r=sp)
| STM32F411 Blackpill | 1 | AliExpress [Link](https://www.aliexpress.us/item/3256801269871873.html)
| Panel mount USB-C | 1 | Amazon [Link](https://a.co/d/cRoqHqx)
| Socketed headers | | Only needed if you want to socket your Blackpill.
## Bluetooth + ZMK build
You can now use the Pillbug dev board along with ZMK firware to make this a wireless mod. Basically, just swap out the Blackpill with a Pillbug and add a battery.
| Component | Qty | Notes |
| --------- | --- | ----- |
| Pillbug | 1 | MechWild [Link](https://mechwild.com/product/pillbug/)
| 2000 mAh battery | 1 | Amazon [Link](https://a.co/d/hlTVT1p)
v2022-08-05 of the PCB requires you to bridge the 3.3v pins with a wire. You can do this easily after soldering the controller in place and tacking a short wire with stripped ends to the existing solder joints on the same side as the LEDs/resistors. The diagram below shows you which pins.
The current version in the repo does not require this.
If you're using a battery that's larger than 500 mAh, short JP1 on the back of the Pillbug to enable "Charge Boost" (changes charge rate from 100mA to 500mA)
## Firmware
### Vial
Source: https://github.com/dcpedit/vial-qmk-dev/tree/vial/keyboards/dcpedit/kint_bp
* `/firmware/dcpedit_kint_bp_vial.bin` - Default keymap (stock Kinesis)
* `/firmware/dcpedit_kint_bp_vial_6layers.bin` - Support for 6 layers
### ZMK
Source: https://github.com/dcpedit/zmk/tree/kinesispb/app/boards/shields/kinesispb
* `/firmware/zmk_default.uf2` - Default keymap (stock Kinesis)
* `/firmware/zmk_reset.uf2` - Resets PillBug board for BT connectivity issue on MacOS