Michael Stapelberg
38ae329743
update artifacts for v2021-06-26
3 years ago
Michael Stapelberg
e50db5470b
connect GND3 (Teensy vertical pin header) to GND
...
This removes the unexpected opens from the design.
fixes https://github.com/kinx-project/kint/issues/38
3 years ago
Michael Stapelberg
c6477680df
set digikeypn, mouserpn and mpn fields where unambiguous
...
This might make starting with your own BOM a little easier.
The choice of the Teensy and mounting method (socket, pin headers, something
else entirely?) is left to the user.
3 years ago
Michael Stapelberg
2f766625e7
update artifacts for v2021-04-25
3 years ago
Joel Bradshaw
48328a4ce8
Widen slots for compatibility with Aisler ( #31 )
...
Aisler is a board service that introduced a budget service for "Simple"
boards. KinT almost met the requirements, but these slots were too
narrow. These zigzags make it so that the slots are always 2.4mm wide,
but should still contact the posts and stabilize the board.
fixes #27
3 years ago
Michael Stapelberg
50ee7aa0ec
update artifacts for v2020-06-30
4 years ago
Michael Stapelberg
b9be3d652a
adjust silkscreen, route traces to enable GND plane filling
4 years ago
Michael Stapelberg
5b7a5d96dd
teensy: update silk screen to indicate sizes and compat
4 years ago
Michael Stapelberg
7fdc6572b3
teensy: add vertical pins in teensy LC/3.2/4.0 position
4 years ago
Michael Stapelberg
44e6c8be96
update artifacts
4 years ago
Michael Stapelberg
07dc377cb4
give track some more space to the cutout
4 years ago
Michael Stapelberg
c1cd85b19c
bump revision to v2020-06-23
4 years ago
Michael Stapelberg
867746d8ce
silkscreen: mark teensy++ do not connect pins with x
4 years ago
Michael Stapelberg
61ba4677a6
silkscreen: add rectangle for adding own marker descriptions
4 years ago
Michael Stapelberg
0d6c64d61b
silkscreen: mark LED cathodes very explicitly
4 years ago
Michael Stapelberg
7076e01e8c
switch from 0R resistors to solder jumpers (thanks mxf)
4 years ago
Michael Stapelberg
e8462c31c6
teensy: add teensy++ 2.0 RST/GND/5V pins in correct spot
...
They differ by one pin between the 3.x series and the teensy++.
4 years ago
Michael Stapelberg
0c3383341e
fix top mounting hole: was 5mm, should be 6mm
4 years ago
Michael Stapelberg
630c7e713d
move right_13_down and left_13_lt a few millimeters up
...
For less strain on the FPC cables, on both KB500 and KB600.
4 years ago
Michael Stapelberg
931011a2e2
update PCB revision
4 years ago
Michael Stapelberg
bbff179137
update schematic revision
4 years ago
Michael Stapelberg
fa37b4d106
make some space at the edges of the PCB
4 years ago
Michael Stapelberg
852018ae92
square cutouts
4 years ago
Michael Stapelberg
d11868dc34
fix KB600 pinout
4 years ago
Michael Stapelberg
8ea74c6f7a
add molex FPC part number to silk screen
4 years ago
Michael Stapelberg
2a4d3f6a05
gitignore: all kicad files
4 years ago
Michael Stapelberg
0026fd6ce0
move files into kicad/ directory
4 years ago