mirror of https://github.com/carbonfet/dactyl-manuform.git synced 2024-11-18 03:25:30 +00:00

dactyl manuform https://www.reddit.com/r/MechanicalKeyboards/comments/ak8d0m/dactyl_manuform_5x7/

Go to file

Tom Short fdcbef586f Parameterizing updates		2017-03-10 18:08:27 -05:00
doc	Initial commit	2015-03-06 15:26:01 -08:00
guide	makeup changes	2016-09-11 18:29:06 +02:00
resources	Including PCBs and updating README	2015-12-03 21:39:36 -08:00
src/dactyl_keyboard	Parameterizing updates	2017-03-10 18:08:27 -05:00
test/dactyl_cave	Initial commit	2015-03-06 15:26:01 -08:00
things	Readme updates and file reorg	2017-03-09 19:46:15 -05:00
.gitignore	Add to gitignore -- nrepl, lein, target cruft	2015-12-27 15:26:59 -06:00
LICENSE	Updating licenses	2015-12-03 21:19:40 -08:00
LICENSE-models	Updating licenses	2015-12-03 21:19:40 -08:00
project.clj	Finally sharing new model	2015-12-03 20:45:05 -08:00
README.md	Parameterizing updates	2017-03-10 18:08:27 -05:00

README.md

The Dactyl-ManuForm Keyboard

This is a fork of the Dactyl, a parameterized, split-hand, concave, columnar, ergonomic keyboard.

The main change is that the thumb cluster was adapted from the ManuForm keyboard (geekhack). The walls were changed to just drop to the floor. The keyboard is paramaterized to allow the following:

Rows: 4 - 6
Columns: 5 and up
Row curvature
Column curvature
Row tilt (tenting)
Column tilt
Column offsets

I plan to try the 4x6 version or maybe the 4x5 version. The default has more tenting than the Dactyl. See the following model files:

This is still a work in progress.

I plan to use a Teensy 2++ in each half. Then, I have enough channels to wire straight to each key switch. Diodes are not needed. Then, I can connect them with a serial connection, and adapt the QMK firmware for the Let's split keyboard that implements this approach. Each half can be master.

This doesn't have a bottom. I may or may not add one. I have many test prints to try.

Assembly

Generating a Design

Setting up the Clojure environment

Generating the design

Run lein repl
Load the file (load-file "src/dactyl_keyboard/dactyl.clj")
This will regenerate the things/*.scad files
Use OpenSCAD to open a .scad file.
Make changes to design, repeat load-file, OpenSCAD will watch for changes and rerender.
When done, use OpenSCAD to export STL files

Tips

Printing

Pregenerated STL files are available in the things/ directory.

Wiring

Masks for the flexible PCBs I used are available for the left and right side.

A very rough guide for the brave is here - It will be improved over time (TODO)!

License

The source code for generating the models (everything excluding the things/ and resources/ directories is distributed under the GNU AFFERO GENERAL PUBLIC LICENSE Version 3. The generated models and PCB designs are distributed under the Creative Commons Attribution-NonCommercial-ShareAlike License Version 3.0.