mirror of https://github.com/carbonfet/dactyl-manuform.git synced 2024-11-18 03:25:30 +00:00

dactyl manuform https://www.reddit.com/r/MechanicalKeyboards/comments/ak8d0m/dactyl_manuform_5x7/

Go to file

Tom Short 18d24b6cfd yet another photo try		2017-03-11 16:24:28 -05:00
doc	Initial commit	2015-03-06 15:26:01 -08:00
guide	makeup changes	2016-09-11 18:29:06 +02:00
resources	Including PCBs and updating README	2015-12-03 21:39:36 -08:00
src/dactyl_keyboard	Add a test object for the hex spacers	2017-03-11 16:18:20 -05:00
test/dactyl_cave	Initial commit	2015-03-06 15:26:01 -08:00
things	Add a test object for the hex spacers	2017-03-11 16:18:20 -05:00
.gitignore	Add to gitignore -- nrepl, lein, target cruft	2015-12-27 15:26:59 -06:00
fulmer.cjl.txt	Tweak hex-spacer	2017-03-11 11:27:47 -05:00
fulmer.clj	Tweak hex-spacer	2017-03-11 11:27:47 -05:00
LICENSE	Updating licenses	2015-12-03 21:19:40 -08:00
LICENSE-models	Updating licenses	2015-12-03 21:19:40 -08:00
project.clj	Finally sharing new model	2015-12-03 20:45:05 -08:00
README.md	yet another photo try	2017-03-11 16:24:28 -05:00
repl.gcode	Tweak hex-spacer	2017-03-11 11:27:47 -05:00
repl.makerbot	Tweak hex-spacer	2017-03-11 11:27:47 -05:00
repl.scad	Tweak hex-spacer	2017-03-11 11:27:47 -05:00
repl.stl	Tweak hex-spacer	2017-03-11 11:27:47 -05:00
repl.x3g	Tweak hex-spacer	2017-03-11 11:27:47 -05:00
t.scad	Tweak hex-spacer	2017-03-11 11:27:47 -05:00
tags	Tweak hex-spacer	2017-03-11 11:27:47 -05:00

README.md

The Dactyl-ManuForm Keyboard

This is a fork of the Dactyl, a parameterized, split-hand, concave, columnar, ergonomic keyboard.

The main change is that the thumb cluster was adapted from the ManuForm keyboard (geekhack). The walls were changed to just drop to the floor. The keyboard is paramaterized to allow the following:

Rows: 4 - 6
Columns: 5 and up
Row curvature
Column curvature
Row tilt (tenting)
Column tilt
Column offsets

I plan to try the 4x6 version or maybe the 4x5 version. The default has more tenting than the Dactyl. See the following model files for configurations that may be most common:

This is still a work in progress. I have not started on wiring, and I don't know if everything fits.

I plan to use a Teensy 2++ in each half. Then, I have enough channels to wire straight to each key switch. Diodes are not needed. Then, I can connect them with a serial connection, and adapt the QMK firmware for the Let's split keyboard that implements this approach. Each half can be master.

This doesn't have a bottom. It has hex holes designed for 9- or 10-mm long M3 female-female spacers. Then, I can use a M3 wafer-head screws to connect a bottom plate. If wires aren't dangling, a bottom plate may not be needed.

Assembly

Generating a Design

Setting up the Clojure environment

Generating the design

Run lein repl
Load the file (load-file "src/dactyl_keyboard/dactyl.clj")
This will regenerate the things/*.scad files
Use OpenSCAD to open a .scad file.
Make changes to design, repeat load-file, OpenSCAD will watch for changes and rerender.
When done, use OpenSCAD to export STL files

Tips

Printing

Pregenerated STL files are available in the things/ directory.

Wiring

Masks for the flexible PCBs I used are available for the left and right side.

A very rough guide for the brave is here - It will be improved over time (TODO)!

License

The source code for generating the models (everything excluding the things/ and resources/ directories is distributed under the GNU AFFERO GENERAL PUBLIC LICENSE Version 3. The generated models and PCB designs are distributed under the Creative Commons Attribution-NonCommercial-ShareAlike License Version 3.0.