|
|
|
|
@ -1,3 +1,64 @@
|
|
|
|
|
* Preparation and Cost
|
|
|
|
|
Get all the parts / raw material
|
|
|
|
|
- For the 3D printing there are two options:
|
|
|
|
|
1. Filament, which is the basis for 3D printing. Luckily I could print at my work-place
|
|
|
|
|
which reduced the cost from 210€ to 70€
|
|
|
|
|
2. Buy the printout of adareth's model at shapeways for 210€ over here
|
|
|
|
|
http://www.shapeways.com/designer/adereth/creations
|
|
|
|
|
- Decide on the switches
|
|
|
|
|
- If you are going to invest a whole lot of time and money for a custom keyboard instead of
|
|
|
|
|
buying one for 10€ I'd recommend to use your favorite switch-type. To make a
|
|
|
|
|
well-informed decision I bought a switch-tester for this from massdrop and decided on
|
|
|
|
|
Cherry MX Whites. https://www.massdrop.com/buy/varmilo-switch-tester-with-anodized-case
|
|
|
|
|
- I ordered 70 Cherry MX Whites from here:
|
|
|
|
|
https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=847
|
|
|
|
|
- Decide on the key caps
|
|
|
|
|
- On the glamour-Shot you can see the 1976 keycap set, it used to be sold over here:
|
|
|
|
|
http://pimpmykeyboard.com/sa-1976-keycap-set/ but the link is dead right now. You could
|
|
|
|
|
try this link: https://www.massdrop.com/buy/nineteenseventysix-sa-keycap-set but it is a
|
|
|
|
|
massdrop which is way different from usual online-stores. If you find a site that sells
|
|
|
|
|
these make sure you get the right amount and type of keys according to the layout
|
|
|
|
|
- I got the "TKL Base Set + TKL Modifier" from over here:
|
|
|
|
|
http://pimpmykeyboard.com/dsa-pbt-abs-blank-keycap-sets/ but I'm still too long keys
|
|
|
|
|
short, I will have to order those specifically and I have a bunch of keys I don't use
|
|
|
|
|
left-over.
|
|
|
|
|
- The USB-Cable that connects the keyboard to your computer
|
|
|
|
|
- It's an USB 2.0 to USB Mini-B cable, make sure you get one that is 2 meters long, it
|
|
|
|
|
really makes handling the keyboard so much more comfortable
|
|
|
|
|
- https://www.amazon.de/gp/product/B00NH11N5A/
|
|
|
|
|
- The main controller (right half)
|
|
|
|
|
- A Teensy 2.0, i got that one from here: https://www.pjrc.com/store/teensy.html
|
|
|
|
|
- The chip, connectors and cable to give life to the left half
|
|
|
|
|
- TTRS cable and jacks
|
|
|
|
|
- Got my TTRS cable from here: http://www.digikey.de/product-search/de?keywords=839-1257-ND
|
|
|
|
|
- Got my TTRS jacks from here: http://www.digikey.de/product-search/de?keywords=CP-43514-ND
|
|
|
|
|
- MCP23018 16 bitIO Expander
|
|
|
|
|
- Got mine from here: http://www.digikey.de/product-search/de?keywords=MCP23018-E%2FSP-ND
|
|
|
|
|
|
|
|
|
|
What I spend on my keyboard (should give you a rough estimate for your build):
|
|
|
|
|
| item | cost |
|
|
|
|
|
|-----------------------------------+------|
|
|
|
|
|
| filament | 70 |
|
|
|
|
|
| switch-tester | 30 |
|
|
|
|
|
| key-caps | 70 |
|
|
|
|
|
| teensy 2.0 | 30 |
|
|
|
|
|
| switches | 60 |
|
|
|
|
|
| usb cable | 10 |
|
|
|
|
|
| IO Expander, TTRS jacks and cable | 30 |
|
|
|
|
|
|-----------------------------------+------|
|
|
|
|
|
| overall cost | 300 |
|
|
|
|
|
#+TBLFM: @9$2=vsum(@2$2..@8$2)
|
|
|
|
|
|
|
|
|
|
My choices / advantages:
|
|
|
|
|
- Using the soldering iron at the uni-workshop for free
|
|
|
|
|
- 76 Diodes for free
|
|
|
|
|
- Soldering wire and copper for free
|
|
|
|
|
- All the resistors used for free (5 resistors are used)
|
|
|
|
|
- Several files for working out the rough edges of the 3D-printout
|
|
|
|
|
|
|
|
|
|
Depending on what you have available you might spend more or less money than me, 300€ however
|
|
|
|
|
is a good rough estimate.
|
|
|
|
|
|
|
|
|
|
* Dactyl Flexible PCB Rough Guide
|
|
|
|
|
|
|
|
|
|
[[workbench.jpg]]
|
|
|
|
|
|
BubblesToTheLimit
8 years ago