Fixed typos

balong-flash.c

@@ -62,22 +62,22 @@ printf("\n This utility is intended for flashing modems with a Balong V7 chipset
 %s [options] <boot file name or directory name>\n\n\
  Following options are allowed:\n\n"
 #ifndef WIN32
-"-p <tty>  - Serial port for communicating with the bootloader (by default /dev/ttyUSB0)\n"
+"-p <tty> - Serial port for communicating with the bootloader (by default /dev/ttyUSB0)\n"
 #else
-"-p #  - Number of the serial port for communicating with the loader (e.g. -p8)\n"
+"-p # - Number of the serial port for communicating with the loader (e.g. -p8)\n"
 "  if the -p option is not specified, the port is auto-detected\n"
 #endif
 "-n       - Multi-file firmware from a specified directory\n\
--g#      - Set digital signature mode\n\
-  -gl - parameter definition\n\
-  -gd - disable signature autodetection\n\
+-g #     - Set digital signature mode\n\
+-gl      - parameter definition\n\
+-gd      - disable signature autodetection\n\
 -m       - Display the firmware file map and exit\n\
 -e       - Disassemble the firmware file into partitions without headers\n\
 -s       - Disassemble the firmware file into partitions with headers\n\
 -k       - Don't restart the modem after flashing\n\
 -r       - Force reboot of the modem without flashing partitions\n\
 -f       - Flash even if there are CRC errors in the source file\n\
--d#      - Set the firmware type (DLOAD_ID, 0...7), -dl - List of types\n\
+-d #     - Set the firmware type (DLOAD_ID, 0...7), -dl - List of types\n\
 \n",argv[0]);
     return 0;
 
@@ -126,7 +126,7 @@ printf("\n This utility is intended for flashing modems with a Balong V7 chipset
      return -1;
   }
 }
-printf("\n Program for flashing Balong-chipset devices, V3.0.%i, (c) forth32, 2015, GNU GPLv3\n",BUILDNO);
+printf("\nProgram for flashing Balong-chipset devices, V3.0.%i, (c) forth32, 2015, GNU GPLv3\n",BUILDNO);
 printf("English Version (c) robertzaage, 2022\n");
 #ifdef WIN32
 printf("Windows Port 32bit (c) rust3028, 2016\n");