---

# This is the list of users to generate.
# Every device must have a unique username.
# You can generate up to 250 users at one time.
# Usernames with leading 0's or containing only numbers should be escaped in double quotes, e.g. "000dan" or "123".
# Emails are not allowed
users:
  - phone
  - laptop
  - desktop

### Review these options BEFORE you run Algo, as they are very difficult/impossible to change after the server is deployed.

# Change default SSH port for the cloud roles only
# It doesn't apply if you deploy to your existing Ubuntu Server
ssh_port: 4160

# Deploy StrongSwan to enable IPsec support
ipsec_enabled: true

# Deploy WireGuard
# WireGuard will listen on 51820/UDP. You might need to change to another port
# if your network blocks this one. Be aware that 53/UDP (DNS) is blocked on some
# mobile data networks.
wireguard_enabled: true
wireguard_port: 51820

# This feature allows you to configure the Algo server to send outbound traffic
# through a different external IP address than the one you are establishing the VPN connection with.
# More info https://trailofbits.github.io/algo/cloud-alternative-ingress-ip.html
# Available for the following cloud providers:
# - DigitalOcean
alternative_ingress_ip: false

# Reduce the MTU of the VPN tunnel
# Some cloud and internet providers use a smaller MTU (Maximum Transmission
# Unit) than the normal value of 1500 and if you don't reduce the MTU of your
# VPN tunnel some network connections will hang. Algo will attempt to set this
# automatically based on your server, but if connections hang you might need to
# adjust this yourself.
# See: https://github.com/trailofbits/algo/blob/master/docs/troubleshooting.md#various-websites-appear-to-be-offline-through-the-vpn
reduce_mtu: 0

# Algo will use the following lists to block ads. You can add new block lists
# after deployment by modifying the line starting "BLOCKLIST_URLS=" at:
# /usr/local/sbin/adblock.sh
# If you load very large blocklists, you may also have to modify resource limits:
# /etc/systemd/system/dnsmasq.service.d/100-CustomLimitations.conf
adblock_lists:
 - "https://raw.githubusercontent.com/StevenBlack/hosts/master/hosts"

# Enable DNS encryption.
# If 'false', 'dns_servers' should be specified below.
# DNS encryption can not be disabled if DNS adblocking is enabled
dns_encryption: true

# Block traffic between connected clients. Change this to false to enable
# connected clients to reach each other, as well as other computers on the
# same LAN as your Algo server (i.e. the "road warrior" setup). In this
# case, you may also want to enable SMB/CIFS and NETBIOS traffic below.
BetweenClients_DROP: true

# Block SMB/CIFS traffic
block_smb: true

# Block NETBIOS traffic
block_netbios: true

# Your Algo server will automatically install security updates. Some updates
# require a reboot to take effect but your Algo server will not reboot itself
# automatically unless you change 'enabled' below from 'false' to 'true', in
# which case a reboot will take place if necessary at the time specified (as
# HH:MM) in the time zone of your Algo server. The default time zone is UTC.
unattended_reboot:
  enabled: false
  time: 06:00

### Advanced users only below this line ###

# DNS servers which will be used if 'dns_encryption' is 'true'. Multiple
# providers may be specified, but avoid mixing providers that filter results
# (like Cisco) with those that don't (like Cloudflare) or you could get
# inconsistent results. The list of available public providers can be found
# here:
# https://github.com/DNSCrypt/dnscrypt-resolvers/blob/master/v2/public-resolvers.md
dnscrypt_servers:
  ipv4:
    - cloudflare
#   - google
  ipv6:
    - cloudflare-ipv6

# DNS servers which will be used if 'dns_encryption' is 'false'.
# The default is to use Cloudflare.
dns_servers:
  ipv4:
    - 1.1.1.1
    - 1.0.0.1
  ipv6:
    - 2606:4700:4700::1111
    - 2606:4700:4700::1001

# Store the PKI in a ram disk. Enabled only if store_pki (retain the PKI) is set to false
# Supports on MacOS and Linux only (including Windows Subsystem for Linux)
pki_in_tmpfs: true

# Set this to 'true' when running './algo update-users' if you want ALL users to get new certs, not just new users.
keys_clean_all: false

# StrongSwan log level
# https://wiki.strongswan.org/projects/strongswan/wiki/LoggerConfiguration
strongswan_log_level: 2

# rightsourceip for ipsec
# ipv4
strongswan_network: 10.19.48.0/24
# ipv6
strongswan_network_ipv6: '2001:db8:4160::/48'

# If you're behind NAT or a firewall and you want to receive incoming connections long after network traffic has gone silent.
# This option will keep the "connection" open in the eyes of NAT.
# See: https://www.wireguard.com/quickstart/#nat-and-firewall-traversal-persistence
wireguard_PersistentKeepalive: 0

# WireGuard network configuration
wireguard_network_ipv4: 10.19.49.0/24
wireguard_network_ipv6: 2001:db8:a160::/48

# Randomly generated IP address for the local dns resolver
local_service_ip: "{{ '172.16.0.1' | ipmath(1048573 | random(seed=algo_server_name + ansible_fqdn)) }}"
local_service_ipv6: "{{ 'fd00::1' | ipmath(1048573 | random(seed=algo_server_name + ansible_fqdn)) }}"


congrats:
  common: |
    "#                          Congratulations!                            #"
    "#                     Your Algo server is running.                     #"
    "#    Config files and certificates are in the ./configs/ directory.    #"
    "#              Go to https://whoer.net/ after connecting               #"
    "#        and ensure that all your traffic passes through the VPN.      #"
    "#                     Local DNS resolver {{ local_service_ip }}{{ ', ' + local_service_ipv6 if ipv6_support else '' }}                   #"
  p12_pass: |
    "#        The p12 and SSH keys password for new users is {{ p12_export_password }}       #"
  ca_key_pass: |
    "#        The CA key password is {{ CA_password|default(omit) }}       #"
  ssh_access: |
    "#      Shell access: ssh -F configs/{{ ansible_ssh_host|default(omit) }}/ssh_config {{ algo_server_name }}        #"

SSH_keys:
  comment: algo@ssh
  private: configs/algo.pem
  private_tmp: /tmp/algo-ssh.pem
  public: configs/algo.pem.pub

cloud_providers:
  azure:
    size: Standard_B1S
    image:
      publisher: Canonical
      offer: 0001-com-ubuntu-server-focal-daily
      sku: 20_04-daily-lts
      version: latest
  digitalocean:
    size: s-1vcpu-1gb
    image: "ubuntu-20-04-x64"
  ec2:
    # Change the encrypted flag to "false" to disable AWS volume encryption.
    encrypted: true
    # Set use_existing_eip to "true" if you want to use a pre-allocated Elastic IP
    # Additional prompt will be raised to determine which IP to use
    use_existing_eip: false
    size: t2.micro
    image:
      name: "ubuntu-focal-20.04"
      owner: "099720109477"
  gce:
    size: f1-micro
    image: ubuntu-2004-lts
    external_static_ip: false
  lightsail:
    size: nano_1_0
    image: ubuntu_18_04
  scaleway:
    size: DEV1-S
    image: Ubuntu 20.04 Focal Fossa
    arch: x86_64
  hetzner:
    server_type: cx11
    image: ubuntu-20.04
  openstack:
    flavor_ram: ">=512"
    image:  Ubuntu-18.04
  cloudstack:
    size: Micro
    image: Linux Ubuntu 20.04 LTS 64-bit
    disk: 10
  vultr:
    os: Ubuntu 20.04 x64
    size: 1024 MB RAM,25 GB SSD,1.00 TB BW
  local:

fail_hint:
  - Sorry, but something went wrong!
  - Please check the troubleshooting guide.
  - https://trailofbits.github.io/algo/troubleshooting.html

booleans_map:
  Y: true
  y: true