From 244a698531837b04c79a46f56118a0110c1f45d1 Mon Sep 17 00:00:00 2001
From: in-in <in-in@users.noreply.github.com>
Date: Sun, 2 Sep 2018 22:22:24 +0300
Subject: [PATCH] improve readability (#1085)

---
 docs/client-linux-wireguard.md | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/docs/client-linux-wireguard.md b/docs/client-linux-wireguard.md
index 123ab76..3430959 100644
--- a/docs/client-linux-wireguard.md
+++ b/docs/client-linux-wireguard.md
@@ -4,11 +4,13 @@
 
 To connect to your Algo VPN using [WireGuard](https://www.wireguard.com) from an Ubuntu Server 16.04 (Xenial) or 18.04 (Bionic) client, first install WireGuard on the client:
 
-```
+```shell
 # Add the WireGuard repository:
 sudo add-apt-repository ppa:wireguard/wireguard
+
 # Update the list of available packages (not necessary on Bionic):
 sudo apt update 
+
 # Install the tools and kernel module:
 sudo apt install wireguard
 ```
@@ -29,20 +31,25 @@ Use the IP address shown on the `DNS =` line (for most, this will be `172.16.0.1
 
 Finally, install the config file on your client as `/etc/wireguard/wg0.conf` and start WireGuard:
 
-```
+```shell
 # Install the config file to the WireGuard configuration directory on your
 # Bionic or Xenial client:
 sudo install -o root -g root -m 600 <username>.conf /etc/wireguard/wg0.conf
+
 # Start the WireGuard VPN:
 sudo systemctl start wg-quick@wg0
+
 # Check that it started properly:
 sudo systemctl status wg-quick@wg0
+
 # Verify the connection to the Algo VPN:
 sudo wg
+
 # See that your client is using the IP address of your Algo VPN:
 curl ipv4.icanhazip.com
+
 # Optionally configure the connection to come up at boot time:
 sudo systemctl enable wg-quick@wg0
 ```
 
-(If your Linux distribution does not use `systemd`, you can bring up WireGuard with `sudo wg-quick up wg0`).
\ No newline at end of file
+(If your Linux distribution does not use `systemd`, you can bring up WireGuard with `sudo wg-quick up wg0`).