mirror of
https://github.com/KinDR007/VictronMPPT-ESPHOME.git
synced 2024-10-21 07:09:27 +00:00
Mention the victron protocol label per sensor (#166)
This commit is contained in:
parent
0da509c043
commit
9d71066bd8
157
README.md
157
README.md
@ -125,82 +125,90 @@ The `uart_id` and `victron_id` is optional if you use a single UART / victron de
|
||||
|
||||
The victron device pushs one status message per second. To reduce the update interval of the ESPHome entities please use the `throttle` parameter to discard some messages.
|
||||
|
||||
The available numeric sensors are:
|
||||
- `max_power_yesterday`
|
||||
- `max_power_today`
|
||||
- `yield_total`
|
||||
- `yield_yesterday`
|
||||
- `yield_today`
|
||||
- `panel_voltage`
|
||||
- `panel_power`
|
||||
- `battery_voltage`
|
||||
- `battery_voltage_2`
|
||||
- `battery_voltage_3`
|
||||
- `auxiliary_battery_voltage`
|
||||
- `midpoint_voltage_of_the_battery_bank`
|
||||
- `midpoint_deviation_of_the_battery_bank`
|
||||
- `battery_current`
|
||||
- `battery_current_2`
|
||||
- `battery_current_3`
|
||||
- `day_number`
|
||||
- `charging_mode_id`
|
||||
- `error_code`
|
||||
- `warning_code`
|
||||
- `tracking_mode_id`
|
||||
- `device_mode_id`
|
||||
- `load_current`
|
||||
- `ac_out_voltage`
|
||||
- `ac_out_current`
|
||||
- `ac_out_apparent_power`
|
||||
- `battery_temperature`
|
||||
- `instantaneous_power`
|
||||
- `consumed_amp_hours`
|
||||
- `state_of_charge`
|
||||
- `time_to_go`
|
||||
- `depth_of_the_deepest_discharge`
|
||||
- `depth_of_the_last_discharge`
|
||||
- `depth_of_the_average_discharge`
|
||||
- `number_of_charge_cycles`
|
||||
- `number_of_full_discharges`
|
||||
- `cumulative_amp_hours_drawn`
|
||||
- `min_battery_voltage`
|
||||
- `max_battery_voltage`
|
||||
- `last_full_charge`
|
||||
- `number_of_automatic_synchronizations`
|
||||
- `number_of_low_main_voltage_alarms`
|
||||
- `number_of_high_main_voltage_alarms`
|
||||
- `number_of_low_auxiliary_voltage_alarms`
|
||||
- `number_of_high_auxiliary_voltage_alarms`
|
||||
- `min_auxiliary_battery_voltage`
|
||||
- `max_auxiliary_battery_voltage`
|
||||
- `amount_of_discharged_energy`
|
||||
- `amount_of_charged_energy`
|
||||
- `dc_monitor_mode_id`
|
||||
- `off_reason_bitmask`
|
||||
## Entities
|
||||
|
||||
The available text sensors are:
|
||||
- `charging_mode`
|
||||
- `error`
|
||||
- `warning`
|
||||
- `tracking_mode`
|
||||
- `device_mode`
|
||||
- `firmware_version`
|
||||
- `firmware_version_24bit`
|
||||
- `device_type`
|
||||
- `serial_number`
|
||||
- `hardware_revision`
|
||||
- `alarm_condition_active`
|
||||
- `alarm_reason`
|
||||
- `model_description`
|
||||
- `dc_monitor_mode`
|
||||
- `off_reason`
|
||||
### Binary sensors
|
||||
|
||||
Binary sensors:
|
||||
| Label | Sensor name |
|
||||
|-------|---------------|
|
||||
| LOAD | `load_state` |
|
||||
| Relay | `relay_state` |
|
||||
|
||||
- `load_state`
|
||||
- `relay_state`
|
||||
### Sensors
|
||||
|
||||
Big thanks for help to ssieb for the support!
|
||||
| Label | Sensor name |
|
||||
|----------|-------------------------------------------|
|
||||
| AC_OUT_V | `ac_out_voltage` |
|
||||
| AC_OUT_I | `ac_out_current` |
|
||||
| AC_OUT_S | `ac_out_apparent_power` |
|
||||
| CE | `consumed_amp_hours` |
|
||||
| CS | `charging_mode_id` |
|
||||
| DM | `midpoint_deviation_of_the_battery_bank` |
|
||||
| ERR | `error_code` |
|
||||
| HSDS | `day_number` |
|
||||
| MPPT | `tracking_mode_id` |
|
||||
| I | `battery_current` |
|
||||
| I2 | `battery_current_2` |
|
||||
| I3 | `battery_current_3` |
|
||||
| IL | `load_current` |
|
||||
| MODE | `device_mode_id` |
|
||||
| MON | `dc_monitor_mode_id` |
|
||||
| OR | `off_reason_bitmask` |
|
||||
| P | `instantaneous_power` |
|
||||
| PPV | `panel_power` |
|
||||
| SOC | `state_of_charge` |
|
||||
| T | `battery_temperature` |
|
||||
| TTG | `time_to_go` |
|
||||
| VPV | `panel_voltage` |
|
||||
| V | `battery_voltage` |
|
||||
| V2 | `battery_voltage_2` |
|
||||
| V3 | `battery_voltage_3` |
|
||||
| VM | `midpoint_voltage_of_the_battery_bank` |
|
||||
| VS | `auxiliary_battery_voltage` |
|
||||
| WARN | `warning_code` |
|
||||
| H1 | `depth_of_the_deepest_discharge` |
|
||||
| H2 | `depth_of_the_last_discharge` |
|
||||
| H3 | `depth_of_the_average_discharge` |
|
||||
| H4 | `number_of_charge_cycles` |
|
||||
| H5 | `number_of_full_discharges` |
|
||||
| H6 | `cumulative_amp_hours_drawn` |
|
||||
| H7 | `min_battery_voltage` |
|
||||
| H8 | `max_battery_voltage` |
|
||||
| H9 | `last_full_charge` |
|
||||
| H10 | `number_of_automatic_synchronizations` |
|
||||
| H11 | `number_of_low_main_voltage_alarms` |
|
||||
| H12 | `number_of_high_main_voltage_alarms` |
|
||||
| H13 | `number_of_low_auxiliary_voltage_alarms` |
|
||||
| H14 | `number_of_high_auxiliary_voltage_alarms` |
|
||||
| H15 | `min_auxiliary_battery_voltage` |
|
||||
| H16 | `max_auxiliary_battery_voltage` |
|
||||
| H17 | `amount_of_discharged_energy` |
|
||||
| H18 | `amount_of_charged_energy` |
|
||||
| H19 | `yield_total` |
|
||||
| H20 | `yield_today` |
|
||||
| H21 | `max_power_today` |
|
||||
| H22 | `yield_yesterday` |
|
||||
| H23 | `max_power_yesterday` |
|
||||
|
||||
### Text sensors
|
||||
|
||||
| Label | Sensor name |
|
||||
|-------|--------------------------|
|
||||
| Alarm | `alarm_condition_active` |
|
||||
| AR | `alarm_reason` |
|
||||
| BMV | `model_description` |
|
||||
| CS | `charging_mode` |
|
||||
| ERR | `error` |
|
||||
| FW | `firmware_version` |
|
||||
| FWE | `firmware_version_24bit` |
|
||||
| HC# | `hardware_revision` |
|
||||
| MODE | `device_mode` |
|
||||
| MON | `dc_monitor_mode` |
|
||||
| MPPT | `tracking_mode` |
|
||||
| OR | `off_reason` |
|
||||
| PID | `device_type` |
|
||||
| WARN | `warning` |
|
||||
| SER# | `serial_number` |
|
||||
|
||||
|
||||
## Debugging
|
||||
@ -210,3 +218,8 @@ If this component doesn't work out of the box for your device please flash the `
|
||||
```
|
||||
esphome run debug-esp8266-example.yaml
|
||||
```
|
||||
|
||||
|
||||
## Thanks
|
||||
|
||||
Big thanks for help to ssieb for the support!
|
||||
|
Loading…
Reference in New Issue
Block a user