mirror of
https://github.com/ventoy/Ventoy.git
synced 2024-11-17 15:25:36 +00:00
43 lines
1.6 KiB
Plaintext
43 lines
1.6 KiB
Plaintext
|
|
========== Ventoy2Disk.sh ===============
|
|
|
|
sudo sh Ventoy2Disk.sh { -i | -I | -u } /dev/sdX sdX is the USB device, for example /dev/sdb.
|
|
|
|
Ventoy2Disk.sh CMD [ OPTION ] /dev/sdX
|
|
CMD:
|
|
-i install ventoy to sdX (fail if disk already installed with ventoy)
|
|
-I force install ventoy to sdX (no matter installed or not)
|
|
-u update ventoy in sdX
|
|
|
|
OPTION: (optional)
|
|
-r SIZE_MB preserve some space at the bottom of the disk (only for install)
|
|
-s enable secure boot support (default is disabled)
|
|
-g use GPT partition style, default is MBR style (only for install)
|
|
|
|
Please refer https://www.ventoy.net/en/doc_start.html for details.
|
|
|
|
|
|
========== VentoyWeb.sh ===============
|
|
1. sudo sh VentoyWeb.sh
|
|
2. open your browser and visit http://127.0.0.1:24680
|
|
|
|
========== VentoyWebDeepin.sh ===============
|
|
1. sudo sh VentoyWebDeepin.sh
|
|
|
|
|
|
========== CreatePersistentImg.sh ===============
|
|
|
|
sudo sh CreatePersistentImg.sh [ -s SIZE_IN_MB ] [ -t FSTYPE ] [ -l LABEL ] for example:
|
|
|
|
sh CreatePersistentImg.sh ----> persistence.dat in 1GB size and ext4 filesystem and casper-rw label
|
|
sh CreatePersistentImg.sh -l MX-Persist ----> persistence.dat in 1GB size and ext4 filesystem and MX-Persist label
|
|
sh CreatePersistentImg.sh -s 2048 ----> persistence.dat in 2GB size and ext4 filesystem and casper-rw label
|
|
sh CreatePersistentImg.sh -s 4096 -t xfs ----> persistence.dat in 4GB size and xfs filesystem (ext2/3/4 xfs are supported) and casper-rw label
|
|
|
|
Please refer https://www.ventoy.net/en/plugin_persistence.html for details.
|
|
|
|
|
|
|
|
|
|
|