mirror of
https://github.com/ventoy/Ventoy.git
synced 2024-11-17 15:25:36 +00:00
147 lines
4.9 KiB
Plaintext
147 lines
4.9 KiB
Plaintext
|
|
INTRODUCTION
|
|
------------
|
|
|
|
The vblade is a minimal ATA over Ethernet (AoE) storage target. Its
|
|
focus is simplicity, not performance or richness of features. It
|
|
exports a seekable file available over an ethernet local area network
|
|
(LAN) via the AoE data storage protocol.
|
|
|
|
The name, "vblade," is historical: It is a virtual EtherDrive (R)
|
|
blade. The first AoE target hardware sold by Coraid was in a blade
|
|
form factor, ten to a 4-rack-unit chassis.
|
|
|
|
The seekable file is typically a block device like /dev/md0 but even
|
|
regular files will work. Sparse files can be especially convenient.
|
|
When vblade exports the block storage over AoE it becomes a storage
|
|
target. Another host on the same LAN can access the storage if it has
|
|
a compatible aoe kernel driver.
|
|
|
|
BUILDING
|
|
--------
|
|
|
|
The following command should build the vblade program on a Linux-based
|
|
system:
|
|
|
|
make
|
|
|
|
For FreeBSD systems, include an extra parameter like so:
|
|
|
|
make PLATFORM=freebsd
|
|
|
|
EXAMPLES
|
|
--------
|
|
|
|
There is a "vbladed" script that daemonizes the program and sends its
|
|
output to the logger program. Make sure you have logger installed if
|
|
you would like to run vblade as a daemon with the vbladed script.
|
|
|
|
ecashin@kokone vblade$ echo 'I have logger' | logger
|
|
ecashin@kokone vblade$ tail -3 /var/log/messages
|
|
Feb 8 14:52:49 kokone -- MARK --
|
|
Feb 8 15:12:49 kokone -- MARK --
|
|
Feb 8 15:19:56 kokone logger: I have logger
|
|
|
|
Here is a short example showing how to export a block device with a
|
|
vblade. (This is a loop device backed by a sparse file, but you could
|
|
use any seekable file instead of /dev/loop7.)
|
|
|
|
ecashin@kokone vblade$ make
|
|
cc -Wall -c -o aoe.o aoe.c
|
|
cc -Wall -c -o linux.o linux.c
|
|
cc -Wall -c -o ata.o ata.c
|
|
cc -o vblade aoe.o linux.o ata.o
|
|
ecashin@kokone vblade$ su
|
|
Password:
|
|
root@kokone vblade# modprobe loop
|
|
root@kokone vblade# dd if=/dev/zero bs=1k count=1 seek=`expr 1024 \* 4096` of=bd
|
|
-file
|
|
1+0 records in
|
|
1+0 records out
|
|
1024 bytes transferred in 0.009901 seconds (103423 bytes/sec)
|
|
root@kokone vblade# losetup /dev/loop7 bd-file
|
|
root@kokone vblade# ./vblade 9 0 eth0 /dev/loop7
|
|
ioctl returned 0
|
|
4294968320 bytes
|
|
pid 16967: e9.0, 8388610 sectors
|
|
|
|
Here's how you can use the Linux aoe driver to access the storage from
|
|
another host on the LAN.
|
|
|
|
ecashin@kokone ecashin$ ssh makki
|
|
Last login: Mon Feb 7 10:25:04 2005
|
|
ecashin@makki ~$ su
|
|
Password:
|
|
root@makki ecashin# modprobe aoe
|
|
root@makki ecashin# aoe-stat
|
|
e9.0 eth1 up
|
|
root@makki ecashin# mkfs -t ext3 /dev/etherd/e9.0
|
|
mke2fs 1.35 (28-Feb-2004)
|
|
...
|
|
Creating journal (8192 blocks): done
|
|
Writing superblocks and filesystem accounting information: done
|
|
|
|
This filesystem will be automatically checked every 24 mounts or
|
|
180 days, whichever comes first. Use tune2fs -c or -i to override.
|
|
root@makki ecashin# mkdir /mnt/e9.0
|
|
root@makki ecashin# mount /dev/etherd/e9.0 /mnt/e9.0
|
|
root@makki ecashin# echo hooray > /mnt/e9.0/test.txt
|
|
root@makki ecashin# cat /mnt/e9.0/test.txt
|
|
hooray
|
|
|
|
Remember: be as careful with these devices as you would with /dev/hda!
|
|
|
|
Jumbo Frame Compatibility
|
|
-------------------------
|
|
|
|
Vblade can use jumbo frames provided your initiator is jumbo frame
|
|
capable. There is one small configuration gotcha to consider
|
|
to avoid having the vblade kernel frequently drop frames.
|
|
|
|
Vblade uses a raw socket to perform AoE. The linux kernel will
|
|
only buffer a certain amount of data for a raw socket. For 2.6
|
|
kernels, this value is managed through /proc:
|
|
|
|
root@nai aoe# grep . /proc/sys/net/core/rmem_*
|
|
/proc/sys/net/core/rmem_default:128000
|
|
/proc/sys/net/core/rmem_max:128000
|
|
|
|
rmem_max is the max amount a user process may expand the receive
|
|
buffer to -- through setsockopt(...) -- and rmem_default is, as you
|
|
might expect, the default.
|
|
|
|
The gotcha is that this amount to buffer does not relate
|
|
to the amount of user data buffered, but the amount of
|
|
real data buffered. As an example, the Intel GbE controller
|
|
must be given 16KB frames to use an MTU over 8KB.
|
|
For each received frame, the kernel must be able to buffer
|
|
16KB, even if the aoe frame is only 60 bytes in length.
|
|
|
|
The linux aoe initiator will use 16 outstanding frames when
|
|
used with vblade. A good default for ensuring frames are
|
|
not dropped is to allocate 16KB for 17 frames:
|
|
|
|
for f in /proc/sys/net/core/rmem_*; do echo $((17 * 16 * 1024)) >$f; done
|
|
|
|
Be sure to start vblade after changing the buffering defaults
|
|
as the buffer value is set when the socket is opened.
|
|
|
|
AoE Initiator Compatibility
|
|
---------------------------
|
|
|
|
The Linux aoe driver for the 2.6 kernel is compatible if you use
|
|
aoe-2.6-7 or newer. You can use older aoe drivers but you will only
|
|
be able to see one vblade per MAC address.
|
|
|
|
Contrib Patches
|
|
---------------
|
|
|
|
see contrib/README
|
|
|
|
Kvblade
|
|
-------
|
|
|
|
While vblade runs as a userland process (like "ls" or "vi"), there
|
|
is another program that runs inside the kernel. It is called
|
|
kvblade. It is alpha software.
|