/* $Id$ */ #include "stdafx.h" #include #include "openttd.h" #include "debug.h" #include "gfx.h" #include "fileio.h" #include "functions.h" #include "engine.h" #include "spritecache.h" #include "station.h" #include "sprite.h" #include "newgrf.h" #include "variables.h" #include "string.h" #include "bridge.h" #include "economy.h" #include "newgrf_engine.h" #include "vehicle.h" #include "newgrf_text.h" #include "table/sprites.h" #include "newgrf_spritegroup.h" /* TTDPatch extended GRF format codec * (c) Petr Baudis 2004 (GPL'd) * Changes by Florian octo Forster are (c) by the OpenTTD development team. * * Contains portions of documentation by TTDPatch team. * Thanks especially to Josef Drexler for the documentation as well as a lot * of help at #tycoon. Also thanks to Michael Blunck for is GRF files which * served as subject to the initial testing of this codec. */ uint16 _custom_sprites_base; static int _skip_sprites; // XXX static uint _file_index; // XXX SpriteID _signal_base = 0; static GRFFile *_cur_grffile; GRFFile *_first_grffile; GRFConfig *_first_grfconfig; static SpriteID _cur_spriteid; static int _cur_stage; static uint32 _nfo_line; /* 32 * 8 = 256 flags. Apparently TTDPatch uses this many.. */ static uint32 _ttdpatch_flags[8]; typedef enum grfspec_feature { GSF_TRAIN, GSF_ROAD, GSF_SHIP, GSF_AIRCRAFT, GSF_STATION, GSF_CANAL, GSF_BRIDGE, GSF_TOWNHOUSE, GSF_GLOBALVAR, GSF_INDUSTRYTILES, GSF_INDUSTRIES, GSF_CARGOS, GSF_SOUNDFX, } grfspec_feature; typedef void (*SpecialSpriteHandler)(byte *buf, int len); static const int _vehcounts[4] = { /* GSF_TRAIN */ NUM_TRAIN_ENGINES, /* GSF_ROAD */ NUM_ROAD_ENGINES, /* GSF_SHIP */ NUM_SHIP_ENGINES, /* GSF_AIRCRAFT */ NUM_AIRCRAFT_ENGINES }; static const int _vehshifts[4] = { /* GSF_TRAIN */ 0, /* GSF_ROAD */ ROAD_ENGINES_INDEX, /* GSF_SHIP */ SHIP_ENGINES_INDEX, /* GSF_AIRCRAFT */ AIRCRAFT_ENGINES_INDEX, }; enum { MAX_STATIONS = 256, }; static uint16 cargo_allowed[TOTAL_NUM_ENGINES]; static uint16 cargo_disallowed[TOTAL_NUM_ENGINES]; /* Debugging messages policy: * * These should be the severities used for direct DEBUG() calls * (there is room for exceptions, but you have to have a good cause): * * 0..2 - dedicated to grfmsg() * 3 * 4 * 5 * 6 - action handler entry reporting - one per action * 7 - basic action progress reporting - in loops, only single one allowed * 8 - more detailed progress reporting - less important stuff, in deep loops etc * 9 - extremely detailed progress reporting - detailed reports inside of deep loops and so */ typedef enum grfmsg_severity { GMS_NOTICE, GMS_WARN, GMS_ERROR, GMS_FATAL, } grfmsg_severity; static void CDECL grfmsg(grfmsg_severity severity, const char *str, ...) { static const char* const severitystr[] = { "Notice", "Warning", "Error", "Fatal" }; int export_severity = 0; char buf[1024]; va_list va; va_start(va, str); vsnprintf(buf, sizeof(buf), str, va); va_end(va); export_severity = 2 - (severity == GMS_FATAL ? 2 : severity); DEBUG(grf, export_severity) ("[%s:%d][%s] %s", _cur_grffile->filename, _nfo_line, severitystr[severity], buf); } #define check_length(real, wanted, where) \ do { \ if (real < wanted) { \ grfmsg(GMS_ERROR, "%s: Invalid special sprite length %d (expected %d)!", \ where, real, wanted); \ return; \ } \ } while (0) static inline byte grf_load_byte(byte **buf) { return *(*buf)++; } static uint16 grf_load_word(byte **buf) { uint16 val = grf_load_byte(buf); return val | (grf_load_byte(buf) << 8); } static uint16 grf_load_extended(byte** buf) { uint16 val; val = grf_load_byte(buf); if (val == 0xFF) val = grf_load_word(buf); return val; } static uint32 grf_load_dword(byte **buf) { uint32 val = grf_load_word(buf); return val | (grf_load_word(buf) << 16); } static uint32 grf_load_var(byte size, byte **buf) { switch (size) { case 1: return grf_load_byte(buf); case 2: return grf_load_word(buf); case 4: return grf_load_dword(buf); default: NOT_REACHED(); return 0; } } static GRFFile *GetFileByGRFID(uint32 grfid) { GRFFile *file; for (file = _first_grffile; file != NULL; file = file->next) { if (file->grfid == grfid) break; } return file; } static GRFFile *GetFileByFilename(const char *filename) { GRFFile *file; for (file = _first_grffile; file != NULL; file = file->next) { if (strcmp(file->filename, filename) == 0) break; } return file; } typedef bool (*VCI_Handler)(uint engine, int numinfo, int prop, byte **buf, int len); #define FOR_EACH_OBJECT for (i = 0; i < numinfo; i++) static void dewagonize(int condition, int engine) { EngineInfo *ei = &_engine_info[engine]; RailVehicleInfo *rvi = &_rail_vehicle_info[engine]; if (condition != 0) { ei->unk2 &= ~0x80; rvi->flags &= ~2; } else { ei->unk2 |= 0x80; rvi->flags |= 2; } } static bool RailVehicleChangeInfo(uint engine, int numinfo, int prop, byte **bufp, int len) { EngineInfo *ei = &_engine_info[engine]; RailVehicleInfo *rvi = &_rail_vehicle_info[engine]; byte *buf = *bufp; int i; bool ret = false; switch (prop) { case 0x05: /* Track type */ FOR_EACH_OBJECT { uint8 tracktype = grf_load_byte(&buf); switch (tracktype) { case 0: ei[i].railtype = RAILTYPE_RAIL; break; case 1: ei[i].railtype = RAILTYPE_MONO; break; case 2: ei[i].railtype = RAILTYPE_MAGLEV; break; default: grfmsg(GMS_WARN, "RailVehicleChangeInfo: Invalid track type %d specified, ignoring.", tracktype); break; } } break; case 0x08: /* AI passenger service */ /* TODO */ FOR_EACH_OBJECT grf_load_byte(&buf); ret = true; break; case 0x09: /* Speed (1 unit is 1 kmh) */ FOR_EACH_OBJECT { uint16 speed = grf_load_word(&buf); if (speed == 0xFFFF) speed = 0; rvi[i].max_speed = speed; } break; case 0x0B: /* Power */ FOR_EACH_OBJECT { uint16 power = grf_load_word(&buf); if (rvi[i].flags & RVI_MULTIHEAD) power /= 2; rvi[i].power = power; dewagonize(power, engine + i); } break; case 0x0D: /* Running cost factor */ FOR_EACH_OBJECT { uint8 runcostfact = grf_load_byte(&buf); if (rvi[i].flags & RVI_MULTIHEAD) runcostfact /= 2; rvi[i].running_cost_base = runcostfact; } break; case 0x0E: /* Running cost base */ FOR_EACH_OBJECT { uint32 base = grf_load_dword(&buf); switch (base) { case 0x4C30: rvi[i].running_cost_class = 0; break; case 0x4C36: rvi[i].running_cost_class = 1; break; case 0x4C3C: rvi[i].running_cost_class = 2; break; } } break; case 0x12: /* Sprite ID */ FOR_EACH_OBJECT { uint8 spriteid = grf_load_byte(&buf); /* TTD sprite IDs point to a location in a 16bit array, but we use it * as an array index, so we need it to be half the original value. */ if (spriteid < 0xFD) spriteid >>= 1; rvi[i].image_index = spriteid; } break; case 0x13: /* Dual-headed */ FOR_EACH_OBJECT { uint8 dual = grf_load_byte(&buf); if (dual != 0) { if (!(rvi[i].flags & RVI_MULTIHEAD)) { // adjust power and running cost if needed rvi[i].power /= 2; rvi[i].running_cost_base /= 2; } rvi[i].flags |= RVI_MULTIHEAD; } else { if (rvi[i].flags & RVI_MULTIHEAD) { // adjust power and running cost if needed rvi[i].power *= 2; rvi[i].running_cost_base *= 2; } rvi[i].flags &= ~RVI_MULTIHEAD; } } break; case 0x14: /* Cargo capacity */ FOR_EACH_OBJECT rvi[i].capacity = grf_load_byte(&buf); break; case 0x15: /* Cargo type */ FOR_EACH_OBJECT { uint8 ctype = grf_load_byte(&buf); if (ctype < NUM_CARGO) { rvi[i].cargo_type = ctype; } else { grfmsg(GMS_NOTICE, "RailVehicleChangeInfo: Invalid cargo type %d, ignoring.", ctype); } } break; case 0x16: /* Weight */ FOR_EACH_OBJECT SB(rvi[i].weight, 0, 8, grf_load_byte(&buf)); break; case 0x17: /* Cost factor */ FOR_EACH_OBJECT rvi[i].base_cost = grf_load_byte(&buf); break; case 0x18: /* AI rank */ FOR_EACH_OBJECT rvi[i].ai_rank = grf_load_byte(&buf); break; case 0x19: /* Engine traction type */ /* What do the individual numbers mean? * 0x00 .. 0x07: Steam * 0x08 .. 0x27: Diesel * 0x28 .. 0x31: Electric * 0x32 .. 0x37: Monorail * 0x38 .. 0x41: Maglev */ FOR_EACH_OBJECT { uint8 traction = grf_load_byte(&buf); int engclass; if (traction <= 0x07) { engclass = 0; } else if (traction <= 0x27) { engclass = 1; } else if (traction <= 0x31) { engclass = 2; ei[i].railtype = RAILTYPE_ELECTRIC; } else if (traction <= 0x41) { engclass = 2; } else { break; } rvi[i].engclass = engclass; } break; case 0x1A: /* Alter purchase list sort order */ FOR_EACH_OBJECT { EngineID pos = grf_load_byte(&buf); if (pos < NUM_TRAIN_ENGINES) { AlterRailVehListOrder(engine + i, pos); } else { grfmsg(GMS_NOTICE, "RailVehicleChangeInfo: Invalid train engine ID %d, ignoring.", pos); } } break; case 0x1B: /* Powered wagons power bonus */ FOR_EACH_OBJECT rvi[i].pow_wag_power = grf_load_word(&buf); break; case 0x1D: /* Refit cargo */ FOR_EACH_OBJECT ei[i].refit_mask = grf_load_dword(&buf); break; case 0x1E: /* Callback */ FOR_EACH_OBJECT rvi[i].callbackmask = grf_load_byte(&buf); break; case 0x21: /* Shorter vehicle */ FOR_EACH_OBJECT rvi[i].shorten_factor = grf_load_byte(&buf); break; case 0x22: /* Visual effect */ // see note in engine.h about rvi->visual_effect FOR_EACH_OBJECT rvi[i].visual_effect = grf_load_byte(&buf); break; case 0x23: /* Powered wagons weight bonus */ FOR_EACH_OBJECT rvi[i].pow_wag_weight = grf_load_byte(&buf); break; case 0x24: /* High byte of vehicle weight */ FOR_EACH_OBJECT { byte weight = grf_load_byte(&buf); if (weight > 4) { grfmsg(GMS_NOTICE, "RailVehicleChangeInfo: Nonsensical weight of %d tons, ignoring.", weight << 8); } else { SB(rvi[i].weight, 8, 8, weight); } } break; case 0x27: /* Miscellaneous flags */ FOR_EACH_OBJECT ei[i].misc_flags = grf_load_byte(&buf); break; case 0x28: /* Cargo classes allowed */ FOR_EACH_OBJECT cargo_allowed[engine + i] = grf_load_word(&buf); break; case 0x29: /* Cargo classes disallowed */ FOR_EACH_OBJECT cargo_disallowed[engine + i] = grf_load_word(&buf); break; /* TODO */ /* Fall-through for unimplemented one byte long properties. */ case 0x1C: /* Refit cost */ case 0x1F: /* Tractive effort */ case 0x20: /* Air drag */ case 0x25: /* User-defined bit mask to set when checking veh. var. 42 */ case 0x26: /* Retire vehicle early */ /* TODO */ FOR_EACH_OBJECT grf_load_byte(&buf); ret = true; break; default: ret = true; break; } *bufp = buf; return ret; } static bool RoadVehicleChangeInfo(uint engine, int numinfo, int prop, byte **bufp, int len) { EngineInfo *ei = &_engine_info[ROAD_ENGINES_INDEX + engine]; RoadVehicleInfo *rvi = &_road_vehicle_info[engine]; byte *buf = *bufp; int i; bool ret = false; switch (prop) { case 0x08: /* Speed (1 unit is 0.5 kmh) */ FOR_EACH_OBJECT rvi[i].max_speed = grf_load_byte(&buf); break; case 0x09: /* Running cost factor */ FOR_EACH_OBJECT rvi[i].running_cost = grf_load_byte(&buf); break; case 0x0A: /* Running cost base */ /* TODO: I have no idea. --pasky */ FOR_EACH_OBJECT grf_load_dword(&buf); ret = true; break; case 0x0E: /* Sprite ID */ FOR_EACH_OBJECT { uint8 spriteid = grf_load_byte(&buf); // cars have different custom id in the GRF file if (spriteid == 0xFF) spriteid = 0xFD; if (spriteid < 0xFD) spriteid >>= 1; rvi[i].image_index = spriteid; } break; case 0x0F: /* Cargo capacity */ FOR_EACH_OBJECT rvi[i].capacity = grf_load_byte(&buf); break; case 0x10: /* Cargo type */ FOR_EACH_OBJECT { uint8 cargo = grf_load_byte(&buf); if (cargo < NUM_CARGO) { rvi[i].cargo_type = cargo; } else { grfmsg(GMS_NOTICE, "RoadVehicleChangeInfo: Invalid cargo type %d, ignoring.", cargo); } } break; case 0x11: /* Cost factor */ FOR_EACH_OBJECT rvi[i].base_cost = grf_load_byte(&buf); // ?? is it base_cost? break; case 0x12: /* SFX */ FOR_EACH_OBJECT rvi[i].sfx = grf_load_byte(&buf); break; case 0x13: /* Power in 10hp */ case 0x14: /* Weight in 1/4 tons */ case 0x15: /* Speed in mph*0.8 */ /* TODO: Support for road vehicles realistic power * computations (called rvpower in TTDPatch) is just * missing in OTTD yet. --pasky */ FOR_EACH_OBJECT grf_load_byte(&buf); ret = true; break; case 0x16: /* Cargos available for refitting */ FOR_EACH_OBJECT ei[i].refit_mask = grf_load_dword(&buf); break; case 0x17: /* Callback mask */ FOR_EACH_OBJECT rvi[i].callbackmask = grf_load_byte(&buf); break; case 0x1C: /* Miscellaneous flags */ FOR_EACH_OBJECT ei[i].misc_flags = grf_load_byte(&buf); break; case 0x1D: /* Cargo classes allowed */ FOR_EACH_OBJECT cargo_allowed[ROAD_ENGINES_INDEX + engine + i] = grf_load_word(&buf); break; case 0x1E: /* Cargo classes disallowed */ FOR_EACH_OBJECT cargo_disallowed[ROAD_ENGINES_INDEX + engine + i] = grf_load_word(&buf); break; case 0x18: /* Tractive effort */ case 0x19: /* Air drag */ case 0x1A: /* Refit cost */ case 0x1B: /* Retire vehicle early */ /* TODO */ FOR_EACH_OBJECT grf_load_byte(&buf); ret = true; break; default: ret = true; break; } *bufp = buf; return ret; } static bool ShipVehicleChangeInfo(uint engine, int numinfo, int prop, byte **bufp, int len) { EngineInfo *ei = &_engine_info[SHIP_ENGINES_INDEX + engine]; ShipVehicleInfo *svi = &_ship_vehicle_info[engine]; byte *buf = *bufp; int i; bool ret = false; //printf("e %x prop %x?\n", engine, prop); switch (prop) { case 0x08: /* Sprite ID */ FOR_EACH_OBJECT { uint8 spriteid = grf_load_byte(&buf); // ships have different custom id in the GRF file if (spriteid == 0xFF) spriteid = 0xFD; if (spriteid < 0xFD) spriteid >>= 1; svi[i].image_index = spriteid; } break; case 0x09: /* Refittable */ FOR_EACH_OBJECT svi[i].refittable = grf_load_byte(&buf); break; case 0x0A: /* Cost factor */ FOR_EACH_OBJECT svi[i].base_cost = grf_load_byte(&buf); // ?? is it base_cost? break; case 0x0B: /* Speed (1 unit is 0.5 kmh) */ FOR_EACH_OBJECT svi[i].max_speed = grf_load_byte(&buf); break; case 0x0C: /* Cargo type */ FOR_EACH_OBJECT { uint8 cargo = grf_load_byte(&buf); // XXX: Need to consult this with patchman yet. #if 0 // Documentation claims this is already the // per-landscape cargo type id, but newships.grf // assume otherwise. cargo = local_cargo_id_ctype[cargo]; #endif if (cargo < NUM_CARGO) { svi[i].cargo_type = cargo; } else { grfmsg(GMS_NOTICE, "ShipVehicleChangeInfo: Invalid cargo type %d, ignoring.", cargo); } } break; case 0x0D: /* Cargo capacity */ FOR_EACH_OBJECT svi[i].capacity = grf_load_word(&buf); break; case 0x0F: /* Running cost factor */ FOR_EACH_OBJECT svi[i].running_cost = grf_load_byte(&buf); break; case 0x10: /* SFX */ FOR_EACH_OBJECT svi[i].sfx = grf_load_byte(&buf); break; case 0x11: /* Cargos available for refitting */ FOR_EACH_OBJECT ei[i].refit_mask = grf_load_dword(&buf); break; case 0x12: /* Callback mask */ FOR_EACH_OBJECT svi[i].callbackmask = grf_load_byte(&buf); break; case 0x17: /* Miscellaneous flags */ FOR_EACH_OBJECT ei[i].misc_flags = grf_load_byte(&buf); break; case 0x18: /* Cargo classes allowed */ FOR_EACH_OBJECT cargo_allowed[SHIP_ENGINES_INDEX + engine + i] = grf_load_word(&buf); break; case 0x19: /* Cargo classes disallowed */ FOR_EACH_OBJECT cargo_disallowed[SHIP_ENGINES_INDEX + engine + i] = grf_load_word(&buf); break; case 0x13: /* Refit cost */ case 0x14: /* Ocean speed fraction */ case 0x15: /* Canal speed fraction */ case 0x16: /* Retire vehicle early */ /* TODO */ FOR_EACH_OBJECT grf_load_byte(&buf); ret = true; break; default: ret = true; break; } *bufp = buf; return ret; } static bool AircraftVehicleChangeInfo(uint engine, int numinfo, int prop, byte **bufp, int len) { EngineInfo *ei = &_engine_info[AIRCRAFT_ENGINES_INDEX + engine]; AircraftVehicleInfo *avi = &_aircraft_vehicle_info[engine]; byte *buf = *bufp; int i; bool ret = false; //printf("e %x prop %x?\n", engine, prop); switch (prop) { case 0x08: /* Sprite ID */ FOR_EACH_OBJECT { uint8 spriteid = grf_load_byte(&buf); // aircraft have different custom id in the GRF file if (spriteid == 0xFF) spriteid = 0xFD; if (spriteid < 0xFD) spriteid >>= 1; avi[i].image_index = spriteid; } break; case 0x09: /* Helicopter */ FOR_EACH_OBJECT SB(avi[i].subtype, 0, 1, (grf_load_byte(&buf) != 0 ? 1 : 0)); break; case 0x0A: /* Large */ FOR_EACH_OBJECT SB(avi[i].subtype, 1, 1, (grf_load_byte(&buf) != 0 ? 1 : 0)); break; case 0x0B: /* Cost factor */ FOR_EACH_OBJECT avi[i].base_cost = grf_load_byte(&buf); // ?? is it base_cost? break; case 0x0C: /* Speed (1 unit is 8 mph) */ FOR_EACH_OBJECT avi[i].max_speed = grf_load_byte(&buf); break; case 0x0D: /* Acceleration */ FOR_EACH_OBJECT avi[i].acceleration = grf_load_byte(&buf); break; case 0x0E: /* Running cost factor */ FOR_EACH_OBJECT avi[i].running_cost = grf_load_byte(&buf); break; case 0x0F: /* Passenger capacity */ FOR_EACH_OBJECT avi[i].passenger_capacity = grf_load_word(&buf); break; case 0x11: /* Mail capacity */ FOR_EACH_OBJECT avi[i].mail_capacity = grf_load_byte(&buf); break; case 0x12: /* SFX */ FOR_EACH_OBJECT avi[i].sfx = grf_load_byte(&buf); break; case 0x13: /* Cargos available for refitting */ FOR_EACH_OBJECT ei[i].refit_mask = grf_load_dword(&buf); break; case 0x14: /* Callback mask */ FOR_EACH_OBJECT avi[i].callbackmask = grf_load_byte(&buf); break; case 0x17: /* Miscellaneous flags */ FOR_EACH_OBJECT ei[i].misc_flags = grf_load_byte(&buf); break; case 0x18: /* Cargo classes allowed */ FOR_EACH_OBJECT cargo_allowed[AIRCRAFT_ENGINES_INDEX + engine + i] = grf_load_word(&buf); break; case 0x19: /* Cargo classes disallowed */ FOR_EACH_OBJECT cargo_disallowed[AIRCRAFT_ENGINES_INDEX + engine + i] = grf_load_word(&buf); break; case 0x15: /* Refit cost */ case 0x16: /* Retire vehicle early */ /* TODO */ FOR_EACH_OBJECT grf_load_byte(&buf); ret = true; break; default: ret = true; break; } *bufp = buf; return ret; } static bool StationChangeInfo(uint stid, int numinfo, int prop, byte **bufp, int len) { StationSpec **statspec; byte *buf = *bufp; int i; bool ret = false; if (stid + numinfo > MAX_STATIONS) { grfmsg(GMS_WARN, "StationChangeInfo: Station %u is invalid, max %u, ignoring.", stid + numinfo, MAX_STATIONS); return false; } /* Allocate station specs if necessary */ if (_cur_grffile->stations == NULL) _cur_grffile->stations = calloc(MAX_STATIONS, sizeof(*_cur_grffile->stations)); statspec = &_cur_grffile->stations[stid]; if (prop != 0x08) { /* Check that all stations we are modifying are defined. */ FOR_EACH_OBJECT { if (statspec[i] == NULL) { grfmsg(GMS_NOTICE, "StationChangeInfo: Attempt to modify undefined station %u, ignoring.", stid + i); return false; } } } switch (prop) { case 0x08: /* Class ID */ FOR_EACH_OBJECT { uint32 classid; /* Property 0x08 is special; it is where the station is allocated */ if (statspec[i] == NULL) statspec[i] = calloc(1, sizeof(*statspec[i])); /* Swap classid because we read it in BE meaning WAYP or DFLT */ classid = grf_load_dword(&buf); statspec[i]->sclass = AllocateStationClass(BSWAP32(classid)); } break; case 0x09: /* Define sprite layout */ FOR_EACH_OBJECT { StationSpec *statspec = _cur_grffile->stations[stid + i]; uint t; statspec->tiles = grf_load_extended(&buf); statspec->renderdata = calloc(statspec->tiles, sizeof(*statspec->renderdata)); statspec->copied_renderdata = false; for (t = 0; t < statspec->tiles; t++) { DrawTileSprites *dts = &statspec->renderdata[t]; uint seq_count = 0; dts->seq = NULL; dts->ground_sprite = grf_load_dword(&buf); if (dts->ground_sprite == 0) continue; while (buf < *bufp + len) { DrawTileSeqStruct *dtss; // no relative bounding box support dts->seq = realloc((void*)dts->seq, ++seq_count * sizeof(DrawTileSeqStruct)); dtss = (DrawTileSeqStruct*) &dts->seq[seq_count - 1]; dtss->delta_x = grf_load_byte(&buf); if ((byte) dtss->delta_x == 0x80) break; dtss->delta_y = grf_load_byte(&buf); dtss->delta_z = grf_load_byte(&buf); dtss->width = grf_load_byte(&buf); dtss->height = grf_load_byte(&buf); dtss->unk = grf_load_byte(&buf); dtss->image = grf_load_dword(&buf); /* Remap flags as ours collide */ if (HASBIT(dtss->image, 31)) { CLRBIT(dtss->image, 31); SETBIT(dtss->image, 30); } if (HASBIT(dtss->image, 14)) { CLRBIT(dtss->image, 14); SETBIT(dtss->image, 31); } } } } break; case 0x0A: /* Copy sprite layout */ FOR_EACH_OBJECT { StationSpec *statspec = _cur_grffile->stations[stid + i]; byte srcid = grf_load_byte(&buf); const StationSpec *srcstatspec = _cur_grffile->stations[srcid]; statspec->tiles = srcstatspec->tiles; statspec->renderdata = srcstatspec->renderdata; statspec->copied_renderdata = true; } break; case 0x0B: /* Callback mask */ FOR_EACH_OBJECT statspec[i]->callbackmask = grf_load_byte(&buf); break; case 0x0C: /* Disallowed number of platforms */ FOR_EACH_OBJECT statspec[i]->disallowed_platforms = grf_load_byte(&buf); break; case 0x0D: /* Disallowed platform lengths */ FOR_EACH_OBJECT statspec[i]->disallowed_lengths = grf_load_byte(&buf); break; case 0x0E: /* Define custom layout */ FOR_EACH_OBJECT { StationSpec *statspec = _cur_grffile->stations[stid + i]; while (buf < *bufp + len) { byte length = grf_load_byte(&buf); byte number = grf_load_byte(&buf); StationLayout layout; uint l, p; if (length == 0 || number == 0) break; //debug("l %d > %d ?", length, stat->lengths); if (length > statspec->lengths) { statspec->platforms = realloc(statspec->platforms, length); memset(statspec->platforms + statspec->lengths, 0, length - statspec->lengths); statspec->layouts = realloc(statspec->layouts, length * sizeof(*statspec->layouts)); memset(statspec->layouts + statspec->lengths, 0, (length - statspec->lengths) * sizeof(*statspec->layouts)); statspec->lengths = length; } l = length - 1; // index is zero-based //debug("p %d > %d ?", number, stat->platforms[l]); if (number > statspec->platforms[l]) { statspec->layouts[l] = realloc(statspec->layouts[l], number * sizeof(**statspec->layouts)); // We expect NULL being 0 here, but C99 guarantees that. memset(statspec->layouts[l] + statspec->platforms[l], 0, (number - statspec->platforms[l]) * sizeof(**statspec->layouts)); statspec->platforms[l] = number; } p = 0; layout = malloc(length * number); for (l = 0; l < length; l++) { for (p = 0; p < number; p++) { layout[l * number + p] = grf_load_byte(&buf); } } l--; p--; free(statspec->layouts[l][p]); statspec->layouts[l][p] = layout; } } break; case 0x0F: /* Copy custom layout */ /* TODO */ FOR_EACH_OBJECT { grf_load_byte(&buf); } ret = true; break; case 0x10: /* Little/lots cargo threshold */ FOR_EACH_OBJECT statspec[i]->cargo_threshold = grf_load_word(&buf); break; case 0x11: /* Pylon placement */ FOR_EACH_OBJECT statspec[i]->pylons = grf_load_byte(&buf); break; case 0x12: /* Cargo types for random triggers */ FOR_EACH_OBJECT statspec[i]->cargo_triggers = grf_load_dword(&buf); break; case 0x13: /* General flags */ FOR_EACH_OBJECT statspec[i]->flags = grf_load_byte(&buf); break; case 0x14: /* Overhead wire placement */ FOR_EACH_OBJECT statspec[i]->wires = grf_load_byte(&buf); break; case 0x15: /* Blocked tiles */ FOR_EACH_OBJECT statspec[i]->blocked = grf_load_byte(&buf); break; default: ret = true; break; } *bufp = buf; return ret; } static bool BridgeChangeInfo(uint brid, int numinfo, int prop, byte **bufp, int len) { byte *buf = *bufp; int i; bool ret = false; switch (prop) { case 0x08: /* Year of availability */ FOR_EACH_OBJECT _bridge[brid + i].avail_year = grf_load_byte(&buf); break; case 0x09: /* Minimum length */ FOR_EACH_OBJECT _bridge[brid + i].min_length = grf_load_byte(&buf); break; case 0x0A: /* Maximum length */ FOR_EACH_OBJECT _bridge[brid + i].max_length = grf_load_byte(&buf); break; case 0x0B: /* Cost factor */ FOR_EACH_OBJECT _bridge[brid + i].price = grf_load_byte(&buf); break; case 0x0C: /* Maximum speed */ FOR_EACH_OBJECT _bridge[brid + i].speed = grf_load_word(&buf); break; case 0x0D: /* Bridge sprite tables */ FOR_EACH_OBJECT { Bridge *bridge = &_bridge[brid + i]; byte tableid = grf_load_byte(&buf); byte numtables = grf_load_byte(&buf); if (bridge->sprite_table == NULL) { /* Allocate memory for sprite table pointers and zero out */ bridge->sprite_table = calloc(7, sizeof(*bridge->sprite_table)); } for (; numtables-- != 0; tableid++) { byte sprite; if (tableid >= 7) { // skip invalid data grfmsg(GMS_WARN, "BridgeChangeInfo: Table %d >= 7, skipping.", tableid); for (sprite = 0; sprite < 32; sprite++) grf_load_dword(&buf); continue; } if (bridge->sprite_table[tableid] == NULL) { bridge->sprite_table[tableid] = malloc(32 * sizeof(**bridge->sprite_table)); } for (sprite = 0; sprite < 32; sprite++) bridge->sprite_table[tableid][sprite] = grf_load_dword(&buf); } } break; case 0x0E: /* Flags; bit 0 - disable far pillars */ FOR_EACH_OBJECT _bridge[brid + i].flags = grf_load_byte(&buf); break; default: ret = true; } *bufp = buf; return ret; } static bool GlobalVarChangeInfo(uint gvid, int numinfo, int prop, byte **bufp, int len) { byte *buf = *bufp; int i; bool ret = false; switch (prop) { case 0x08: /* Cost base factor */ FOR_EACH_OBJECT { byte factor = grf_load_byte(&buf); uint price = gvid + i; if (price < NUM_PRICES) { SetPriceBaseMultiplier(price, factor); } else { grfmsg(GMS_WARN, "GlobalVarChangeInfo: Price %d out of range, ignoring.", price); } } break; default: ret = true; } *bufp = buf; return ret; } /* Action 0x00 */ static void VehicleChangeInfo(byte *buf, int len) { byte *bufend = buf + len; int i; /* <00> ()... * * B feature 0, 1, 2 or 3 for trains, road vehicles, ships or planes * 4 for defining new train station sets * B num-props how many properties to change per vehicle/station * B num-info how many vehicles/stations to change * B id ID of first vehicle/station to change, if num-info is * greater than one, this one and the following * vehicles/stations will be changed * B property what property to change, depends on the feature * V new-info new bytes of info (variable size; depends on properties) */ /* TODO: Bridges, town houses. */ static const VCI_Handler handler[] = { /* GSF_TRAIN */ RailVehicleChangeInfo, /* GSF_ROAD */ RoadVehicleChangeInfo, /* GSF_SHIP */ ShipVehicleChangeInfo, /* GSF_AIRCRAFT */ AircraftVehicleChangeInfo, /* GSF_STATION */ StationChangeInfo, /* GSF_CANAL */ NULL, /* GSF_BRIDGE */ BridgeChangeInfo, /* GSF_TOWNHOUSE */NULL, /* GSF_GLOBALVAR */GlobalVarChangeInfo, }; uint8 feature; uint8 numprops; uint8 numinfo; byte engine; EngineInfo *ei = NULL; if (len == 1) { DEBUG(grf, 8) ("Silently ignoring one-byte special sprite 0x00."); return; } check_length(len, 6, "VehicleChangeInfo"); buf++; feature = grf_load_byte(&buf); numprops = grf_load_byte(&buf); numinfo = grf_load_byte(&buf); engine = grf_load_byte(&buf); DEBUG(grf, 6) ("VehicleChangeInfo: Feature %d, %d properties, to apply to %d+%d", feature, numprops, engine, numinfo); if (feature >= lengthof(handler) || handler[feature] == NULL) { grfmsg(GMS_WARN, "VehicleChangeInfo: Unsupported feature %d, skipping.", feature); return; } if (feature <= GSF_AIRCRAFT) { if (engine + numinfo > _vehcounts[feature]) { grfmsg(GMS_ERROR, "VehicleChangeInfo: Last engine ID %d out of bounds (max %d), skipping.", engine + numinfo, _vehcounts[feature]); return; } ei = &_engine_info[engine + _vehshifts[feature]]; } while (numprops-- && buf < bufend) { uint8 prop = grf_load_byte(&buf); bool ignoring = false; switch (feature) { case GSF_TRAIN: case GSF_ROAD: case GSF_SHIP: case GSF_AIRCRAFT: /* Common properties for vehicles */ switch (prop) { case 0x00: /* Introduction date */ FOR_EACH_OBJECT ei[i].base_intro = grf_load_word(&buf); break; case 0x02: /* Decay speed */ FOR_EACH_OBJECT SB(ei[i].unk2, 0, 7, grf_load_byte(&buf) & 0x7F); break; case 0x03: /* Vehicle life */ FOR_EACH_OBJECT ei[i].lifelength = grf_load_byte(&buf); break; case 0x04: /* Model life */ FOR_EACH_OBJECT ei[i].base_life = grf_load_byte(&buf); break; case 0x06: /* Climates available */ FOR_EACH_OBJECT ei[i].climates = grf_load_byte(&buf); break; case 0x07: /* Loading speed */ /* TODO */ /* Hyronymus explained me what does * this mean and insists on having a * credit ;-). --pasky */ /* TODO: This needs to be supported by * LoadUnloadVehicle() first. */ FOR_EACH_OBJECT grf_load_byte(&buf); ignoring = true; break; default: if (handler[feature](engine, numinfo, prop, &buf, bufend - buf)) ignoring = true; break; } break; default: if (handler[feature](engine, numinfo, prop, &buf, bufend - buf)) ignoring = true; break; } if (ignoring) grfmsg(GMS_NOTICE, "VehicleChangeInfo: Ignoring property 0x%02X (not implemented).", prop); } } #undef FOR_EACH_OBJECT /** * Creates a spritegroup representing a callback result * @param value The value that was used to represent this callback result * @return A spritegroup representing that callback result */ static SpriteGroup* NewCallBackResultSpriteGroup(uint16 value) { SpriteGroup *group = AllocateSpriteGroup(); group->type = SGT_CALLBACK; // Old style callback results have the highest byte 0xFF so signify it is a callback result // New style ones only have the highest bit set (allows 15-bit results, instead of just 8) if ((value >> 8) == 0xFF) { value &= ~0xFF00; } else { value &= ~0x8000; } group->g.callback.result = value; return group; } /** * Creates a spritegroup representing a sprite number result. * @param value The sprite number. * @param sprites The number of sprites per set. * @return A spritegroup representing the sprite number result. */ static SpriteGroup* NewResultSpriteGroup(SpriteID sprite, byte num_sprites) { SpriteGroup *group = AllocateSpriteGroup(); group->type = SGT_RESULT; group->g.result.sprite = sprite; group->g.result.num_sprites = num_sprites; return group; } /* Action 0x01 */ static void NewSpriteSet(byte *buf, int len) { /* <01> * * B feature feature to define sprites for * 0, 1, 2, 3: veh-type, 4: train stations * B num-sets number of sprite sets * E num-ent how many entries per sprite set * For vehicles, this is the number of different * vehicle directions in each sprite set * Set num-dirs=8, unless your sprites are symmetric. * In that case, use num-dirs=4. * For stations, must be 12 (hex) for the eighteen * different sprites that make up a station */ /* TODO: No stations support. */ uint8 feature; uint num_sets; uint num_ents; uint i; check_length(len, 4, "NewSpriteSet"); buf++; feature = grf_load_byte(&buf); num_sets = grf_load_byte(&buf); num_ents = grf_load_extended(&buf); _cur_grffile->spriteset_start = _cur_spriteid; _cur_grffile->spriteset_feature = feature; _cur_grffile->spriteset_numsets = num_sets; _cur_grffile->spriteset_numents = num_ents; DEBUG(grf, 7) ( "New sprite set at %d of type %d, " "consisting of %d sets with %d views each (total %d)", _cur_spriteid, feature, num_sets, num_ents, num_sets * num_ents ); for (i = 0; i < num_sets * num_ents; i++) { LoadNextSprite(_cur_spriteid++, _file_index); _nfo_line++; } } /* Helper function to either create a callback or link to a previously * defined spritegroup. */ static SpriteGroup* GetGroupFromGroupID(byte setid, byte type, uint16 groupid) { if (HASBIT(groupid, 15)) return NewCallBackResultSpriteGroup(groupid); if (groupid >= _cur_grffile->spritegroups_count || _cur_grffile->spritegroups[groupid] == NULL) { grfmsg(GMS_WARN, "NewSpriteGroup(0x%02X:0x%02X): Groupid 0x%04X does not exist, leaving empty.", setid, type, groupid); return NULL; } return _cur_grffile->spritegroups[groupid]; } /* Helper function to either create a callback or a result sprite group. */ static SpriteGroup* CreateGroupFromGroupID(byte feature, byte setid, byte type, uint16 spriteid, uint16 num_sprites) { if (HASBIT(spriteid, 15)) return NewCallBackResultSpriteGroup(spriteid); if (spriteid >= _cur_grffile->spriteset_numsets) { grfmsg(GMS_WARN, "NewSpriteGroup(0x%02X:0x%02X): Sprite set %u invalid, max %u", setid, type, spriteid, _cur_grffile->spriteset_numsets); return NULL; } /* Check if the sprite is within range. This can fail if the Action 0x01 * is skipped, as TTDPatch mandates that Action 0x02s must be processed. * We don't have that rule, but must live by the Patch... */ if (_cur_grffile->spriteset_start + spriteid * num_sprites + num_sprites > _cur_spriteid) { grfmsg(GMS_WARN, "NewSpriteGroup(0x%02X:0x%02X): Real Sprite IDs 0x%04X - 0x%04X do not (all) exist (max 0x%04X), leaving empty.", setid, type, _cur_grffile->spriteset_start + spriteid * num_sprites, _cur_grffile->spriteset_start + spriteid * num_sprites + num_sprites - 1, _cur_spriteid - 1); return NULL; } if (feature != _cur_grffile->spriteset_feature) { grfmsg(GMS_WARN, "NewSpriteGroup(0x%02X:0x%02X): Sprite set feature 0x%02X does not match action feature 0x%02X, skipping.", _cur_grffile->spriteset_feature, feature); return NULL; } return NewResultSpriteGroup(_cur_grffile->spriteset_start + spriteid * num_sprites, num_sprites); } /* Action 0x02 */ static void NewSpriteGroup(byte *buf, int len) { /* <02> * * B feature see action 1 * B set-id ID of this particular definition * B type/num-entries * if 80 or greater, this is a randomized or variational * list definition, see below * otherwise it specifies a number of entries, the exact * meaning depends on the feature * V feature-specific-data (huge mess, don't even look it up --pasky) */ uint8 feature; uint8 setid; uint8 type; SpriteGroup *group = NULL; byte *bufend = buf + len; check_length(len, 5, "NewSpriteGroup"); buf++; feature = grf_load_byte(&buf); setid = grf_load_byte(&buf); type = grf_load_byte(&buf); if (setid >= _cur_grffile->spritegroups_count) { // Allocate memory for new sprite group references. _cur_grffile->spritegroups = realloc(_cur_grffile->spritegroups, (setid + 1) * sizeof(*_cur_grffile->spritegroups)); // Initialise new space to NULL for (; _cur_grffile->spritegroups_count < (setid + 1); _cur_grffile->spritegroups_count++) _cur_grffile->spritegroups[_cur_grffile->spritegroups_count] = NULL; } switch (type) { /* Deterministic Sprite Group */ case 0x81: // Self scope, byte case 0x82: // Parent scope, byte case 0x85: // Self scope, word case 0x86: // Parent scope, word case 0x89: // Self scope, dword case 0x8A: // Parent scope, dword { byte varadjust; byte varsize; uint i; /* Check we can load the var size parameter */ check_length(bufend - buf, 1, "NewSpriteGroup (Deterministic) (1)"); group = AllocateSpriteGroup(); group->type = SGT_DETERMINISTIC; group->g.determ.var_scope = HASBIT(type, 1) ? VSG_SCOPE_PARENT : VSG_SCOPE_SELF; switch (GB(type, 2, 2)) { default: NOT_REACHED(); case 0: group->g.determ.size = DSG_SIZE_BYTE; varsize = 1; break; case 1: group->g.determ.size = DSG_SIZE_WORD; varsize = 2; break; case 2: group->g.determ.size = DSG_SIZE_DWORD; varsize = 4; break; } check_length(bufend - buf, 2 + (varsize * 3) + 2, "NewSpriteGroup (Deterministic) (2)"); /* Loop through the var adjusts. Unfortunately we don't know how many we have * from the outset, so we shall have to keep reallocing. */ do { DeterministicSpriteGroupAdjust *adjust; if (group->g.determ.num_adjusts > 0) { check_length(bufend - buf, 2 + varsize + 3, "NewSpriteGroup (Deterministic) (3)"); } group->g.determ.num_adjusts++; group->g.determ.adjusts = realloc(group->g.determ.adjusts, group->g.determ.num_adjusts * sizeof(*group->g.determ.adjusts)); adjust = &group->g.determ.adjusts[group->g.determ.num_adjusts - 1]; /* The first var adjust doesn't have an operation specified, so we set it to add. */ adjust->operation = group->g.determ.num_adjusts == 1 ? DSGA_OP_ADD : grf_load_byte(&buf); adjust->variable = grf_load_byte(&buf); adjust->parameter = IS_BYTE_INSIDE(adjust->variable, 0x60, 0x80) ? grf_load_byte(&buf) : 0; varadjust = grf_load_byte(&buf); adjust->shift_num = GB(varadjust, 0, 5); adjust->type = GB(varadjust, 6, 2); adjust->and_mask = grf_load_var(varsize, &buf); if (adjust->type != DSGA_TYPE_NONE) { adjust->add_val = grf_load_var(varsize, &buf); adjust->divmod_val = grf_load_var(varsize, &buf); } else { adjust->add_val = 0; adjust->divmod_val = 0; } /* Continue reading var adjusts while bit 5 is set. */ } while (HASBIT(varadjust, 5)); group->g.determ.num_ranges = grf_load_byte(&buf); group->g.determ.ranges = calloc(group->g.determ.num_ranges, sizeof(*group->g.determ.ranges)); check_length(bufend - buf, 2 + (2 + 2 * varsize) * group->g.determ.num_ranges, "NewSpriteGroup (Deterministic)"); for (i = 0; i < group->g.determ.num_ranges; i++) { group->g.determ.ranges[i].group = GetGroupFromGroupID(setid, type, grf_load_word(&buf)); group->g.determ.ranges[i].low = grf_load_var(varsize, &buf); group->g.determ.ranges[i].high = grf_load_var(varsize, &buf); } group->g.determ.default_group = GetGroupFromGroupID(setid, type, grf_load_word(&buf)); break; } /* Randomized Sprite Group */ case 0x80: // Self scope case 0x83: // Parent scope { byte triggers; uint i; check_length(bufend - buf, 7, "NewSpriteGroup (Randomized) (1)"); group = AllocateSpriteGroup(); group->type = SGT_RANDOMIZED; group->g.random.var_scope = HASBIT(type, 1) ? VSG_SCOPE_PARENT : VSG_SCOPE_SELF; triggers = grf_load_byte(&buf); group->g.random.triggers = GB(triggers, 0, 7); group->g.random.cmp_mode = HASBIT(triggers, 7) ? RSG_CMP_ALL : RSG_CMP_ANY; group->g.random.lowest_randbit = grf_load_byte(&buf); group->g.random.num_groups = grf_load_byte(&buf); group->g.random.groups = calloc(group->g.random.num_groups, sizeof(*group->g.random.groups)); check_length(bufend - buf, 2 * group->g.random.num_groups, "NewSpriteGroup (Randomized) (2)"); for (i = 0; i < group->g.random.num_groups; i++) { group->g.random.groups[i] = GetGroupFromGroupID(setid, type, grf_load_word(&buf)); } break; } /* Neither a variable or randomized sprite group... must be a real group */ default: { switch (feature) { case GSF_TRAIN: case GSF_ROAD: case GSF_SHIP: case GSF_AIRCRAFT: case GSF_STATION: { byte sprites = _cur_grffile->spriteset_numents; byte num_loaded = type; byte num_loading = grf_load_byte(&buf); uint i; if (_cur_grffile->spriteset_start == 0) { grfmsg(GMS_ERROR, "NewSpriteGroup: No sprite set to work on! Skipping."); return; } check_length(bufend - buf, 2 * num_loaded + 2 * num_loading, "NewSpriteGroup (Real) (1)"); group = AllocateSpriteGroup(); group->type = SGT_REAL; group->g.real.num_loaded = num_loaded; group->g.real.num_loading = num_loading; if (num_loaded > 0) group->g.real.loaded = calloc(num_loaded, sizeof(*group->g.real.loaded)); if (num_loading > 0) group->g.real.loading = calloc(num_loading, sizeof(*group->g.real.loading)); DEBUG(grf, 6) ("NewSpriteGroup: New SpriteGroup 0x%02X, %u views, %u loaded, %u loading", setid, sprites, num_loaded, num_loading); for (i = 0; i < num_loaded; i++) { uint16 spriteid = grf_load_word(&buf); group->g.real.loaded[i] = CreateGroupFromGroupID(feature, setid, type, spriteid, sprites); DEBUG(grf, 8) ("NewSpriteGroup: + rg->loaded[%i] = subset %u", i, spriteid); } for (i = 0; i < num_loading; i++) { uint16 spriteid = grf_load_word(&buf); group->g.real.loading[i] = CreateGroupFromGroupID(feature, setid, type, spriteid, sprites); DEBUG(grf, 8) ("NewSpriteGroup: + rg->loading[%i] = subset %u", i, spriteid); } break; } /* Loading of Tile Layout and Production Callback groups would happen here */ default: grfmsg(GMS_WARN, "NewSpriteGroup: Unsupported feature %d, skipping.", feature); } } } _cur_grffile->spritegroups[setid] = group; } /* Action 0x03 */ static void NewVehicle_SpriteGroupMapping(byte *buf, int len) { /* <03> ... [ ]... * id-list := [] [id-list] * cargo-list := [cargo-list] * * B feature see action 0 * B n-id bits 0-6: how many IDs this definition applies to * bit 7: if set, this is a wagon override definition (see below) * B ids the IDs for which this definition applies * B num-cid number of cargo IDs (sprite group IDs) in this definition * can be zero, in that case the def-cid is used always * B cargo-type type of this cargo type (e.g. mail=2, wood=7, see below) * W cid cargo ID (sprite group ID) for this type of cargo * W def-cid default cargo ID (sprite group ID) */ /* TODO: Bridges, town houses. */ /* TODO: Multiple cargo support could be useful even for trains/cars - * cargo id 0xff is used for showing images in the build train list. */ static byte *last_engines; static int last_engines_count; uint8 feature; uint8 idcount; bool wagover; uint8 cidcount; int c, i; check_length(len, 6, "VehicleMapSpriteGroup"); feature = buf[1]; idcount = buf[2] & 0x7F; wagover = (buf[2] & 0x80) == 0x80; check_length(len, 3 + idcount, "VehicleMapSpriteGroup"); /* If ``n-id'' (or ``idcount'') is zero, this is a ``feature * callback''. */ if (idcount == 0) { grfmsg(GMS_WARN, "VehicleMapSpriteGroup: Feature callbacks not implemented yet."); return; } cidcount = buf[3 + idcount]; check_length(len, 4 + idcount + cidcount * 3, "VehicleMapSpriteGroup"); DEBUG(grf, 6) ("VehicleMapSpriteGroup: Feature %d, %d ids, %d cids, wagon override %d.", feature, idcount, cidcount, wagover); if (feature > GSF_STATION) { grfmsg(GMS_WARN, "VehicleMapSpriteGroup: Unsupported feature %d, skipping.", feature); return; } if (feature == GSF_STATION) { // We do things differently for stations. for (i = 0; i < idcount; i++) { uint8 stid = buf[3 + i]; StationSpec *statspec = _cur_grffile->stations[stid]; byte *bp = &buf[4 + idcount]; for (c = 0; c < cidcount; c++) { uint8 ctype = grf_load_byte(&bp); uint16 groupid = grf_load_word(&bp); if (groupid >= _cur_grffile->spritegroups_count || _cur_grffile->spritegroups[groupid] == NULL) { grfmsg(GMS_WARN, "VehicleMapSpriteGroup: Spriteset 0x%04X out of range 0x%X or empty, skipping.", groupid, _cur_grffile->spritegroups_count); return; } if (ctype == 0xFE) ctype = GC_DEFAULT_NA; if (ctype == 0xFF) ctype = GC_PURCHASE; statspec->spritegroup[ctype] = _cur_grffile->spritegroups[groupid]; } } { byte *bp = buf + 4 + idcount + cidcount * 3; uint16 groupid = grf_load_word(&bp); if (groupid >= _cur_grffile->spritegroups_count || _cur_grffile->spritegroups[groupid] == NULL) { grfmsg(GMS_WARN, "VehicleMapSpriteGroup: Spriteset 0x%04X out of range 0x%X or empty, skipping.", groupid, _cur_grffile->spritegroups_count); return; } for (i = 0; i < idcount; i++) { uint8 stid = buf[3 + i]; StationSpec *statspec = _cur_grffile->stations[stid]; statspec->spritegroup[GC_DEFAULT] = _cur_grffile->spritegroups[groupid]; statspec->groundgroup = _cur_grffile->spritegroups[0]; statspec->grfid = _cur_grffile->grfid; statspec->localidx = stid; SetCustomStationSpec(statspec); } } return; } // FIXME: Tropicset contains things like: // 03 00 01 19 01 00 00 00 00 - this is missing one 00 at the end, // what should we exactly do with that? --pasky if (_cur_grffile->spriteset_start == 0 || _cur_grffile->spritegroups == 0) { grfmsg(GMS_WARN, "VehicleMapSpriteGroup: No sprite set to work on! Skipping."); return; } if (!wagover && last_engines_count != idcount) { last_engines = realloc(last_engines, idcount); last_engines_count = idcount; } if (wagover) { if (last_engines_count == 0) { grfmsg(GMS_ERROR, "VehicleMapSpriteGroup: WagonOverride: No engine to do override with."); return; } DEBUG(grf, 6) ("VehicleMapSpriteGroup: WagonOverride: %u engines, %u wagons.", last_engines_count, idcount); } for (i = 0; i < idcount; i++) { uint8 engine_id = buf[3 + i]; uint8 engine = engine_id + _vehshifts[feature]; byte *bp = &buf[4 + idcount]; if (engine_id > _vehcounts[feature]) { grfmsg(GMS_ERROR, "Id %u for feature 0x%02X is out of bounds.", engine_id, feature); return; } DEBUG(grf, 7) ("VehicleMapSpriteGroup: [%d] Engine %d...", i, engine); for (c = 0; c < cidcount; c++) { uint8 ctype = grf_load_byte(&bp); uint16 groupid = grf_load_word(&bp); DEBUG(grf, 8) ("VehicleMapSpriteGroup: * [%d] Cargo type 0x%X, group id 0x%02X", c, ctype, groupid); if (groupid >= _cur_grffile->spritegroups_count || _cur_grffile->spritegroups[groupid] == NULL) { grfmsg(GMS_WARN, "VehicleMapSpriteGroup: Spriteset 0x%04X out of range 0x%X or empty, skipping.", groupid, _cur_grffile->spritegroups_count); return; } if (ctype == GC_INVALID) ctype = GC_PURCHASE; if (wagover) { // TODO: No multiple cargo types per vehicle yet. --pasky SetWagonOverrideSprites(engine, _cur_grffile->spritegroups[groupid], last_engines, last_engines_count); } else { SetCustomEngineSprites(engine, ctype, _cur_grffile->spritegroups[groupid]); last_engines[i] = engine; } } } { byte *bp = buf + 4 + idcount + cidcount * 3; uint16 groupid = grf_load_word(&bp); DEBUG(grf, 8) ("-- Default group id 0x%04X", groupid); for (i = 0; i < idcount; i++) { uint8 engine = buf[3 + i] + _vehshifts[feature]; // Don't tell me you don't love duplicated code! if (groupid >= _cur_grffile->spritegroups_count || _cur_grffile->spritegroups[groupid] == NULL) { grfmsg(GMS_WARN, "VehicleMapSpriteGroup: Spriteset 0x%04X out of range 0x%X or empty, skipping.", groupid, _cur_grffile->spritegroups_count); return; } if (wagover) { /* If the ID for this action 3 is the same as the vehicle ID, * this indicates we have a helicopter rotor override. */ if (feature == GSF_AIRCRAFT && engine == last_engines[i]) { SetRotorOverrideSprites(engine, _cur_grffile->spritegroups[groupid]); } else { // TODO: No multiple cargo types per vehicle yet. --pasky SetWagonOverrideSprites(engine, _cur_grffile->spritegroups[groupid], last_engines, last_engines_count); } } else { SetCustomEngineSprites(engine, GC_DEFAULT, _cur_grffile->spritegroups[groupid]); SetEngineGRF(engine, _cur_grffile->grfid); last_engines[i] = engine; } } } } /* Action 0x04 */ static void VehicleNewName(byte *buf, int len) { /* <04> * * B veh-type see action 0 (as 00..07, + 0A * But IF veh-type = 48, then generic text * B language-id If bit 6 is set, This is the extended language scheme, with up to 64 language. Otherwise, it is a mapping where set bits have meaning 0 = american, 1 = english, 2 = german, 3 = french, 4 = spanish Bit 7 set means this is a generic text, not a vehicle one (or else) * B num-veh number of vehicles which are getting a new name * B/W offset number of the first vehicle that gets a new name * Byte : ID of vehicle to change * Word : ID of string to change/add * S data new texts, each of them zero-terminated, after * which the next name begins. */ /* TODO: No support for changing non-vehicle text. Perhaps we shouldn't * implement it at all, but it could be useful for some "modpacks" * (completely new scenarios changing all graphics and logically also * factory names etc). We should then also support all languages (by * name), not only the original four ones. --pasky * All of the above are coming. In Time. Some sooner than others :)*/ uint8 feature; uint8 lang; uint8 num; uint16 id; uint16 endid; const char* name; bool new_scheme = _cur_grffile->grf_version >= 7; check_length(len, 6, "VehicleNewName"); buf++; feature = grf_load_byte(&buf); lang = grf_load_byte(&buf); num = grf_load_byte(&buf); id = (lang & 0x80) ? grf_load_word(&buf) : grf_load_byte(&buf); if (feature <= GSF_AIRCRAFT && id < _vehcounts[feature]) { id += _vehshifts[feature]; } endid = id + num; DEBUG(grf, 6) ("VehicleNewName: About to rename engines %d..%d (feature %d) in language 0x%02X.", id, endid, feature, lang); name = (const char*)buf; /*transfer read value*/ len -= (lang & 0x80) ? 6 : 5; for (; id < endid && len > 0; id++) { size_t ofs = strlen(name) + 1; if (ofs < 128) { DEBUG(grf, 8) ("VehicleNewName: %d <- %s", id, name); switch (feature) { case GSF_TRAIN: case GSF_ROAD: case GSF_SHIP: case GSF_AIRCRAFT: { StringID string = AddGRFString(_cur_grffile->grfid, id, lang, new_scheme, name); if (id < TOTAL_NUM_ENGINES) SetCustomEngineName(id, string); break; } default: switch (GB(id, 8, 8)) { case 0xC4: /* Station class name */ if (_cur_grffile->stations == NULL || _cur_grffile->stations[GB(id, 0, 8)] == NULL) { grfmsg(GMS_WARN, "VehicleNewName: Attempt to name undefined station 0x%X, ignoring.", GB(id, 0, 8)); } else { StationClassID sclass = _cur_grffile->stations[GB(id, 0, 8)]->sclass; SetStationClassName(sclass, AddGRFString(_cur_grffile->grfid, id, lang, new_scheme, name)); } break; case 0xC5: /* Station name */ if (_cur_grffile->stations == NULL || _cur_grffile->stations[GB(id, 0, 8)] == NULL) { grfmsg(GMS_WARN, "VehicleNewName: Attempt to name undefined station 0x%X, ignoring.", GB(id, 0, 8)); } else { _cur_grffile->stations[GB(id, 0, 8)]->name = AddGRFString(_cur_grffile->grfid, id, lang, new_scheme, name); } break; default: DEBUG(grf, 7) ("VehicleNewName: Unsupported ID (0x%04X)", id); break; } break; #if 0 case GSF_CANAL : case GSF_BRIDGE : case GSF_TOWNHOUSE : AddGRFString(_cur_spriteid, id, lang, name); switch (GB(id, 8,8)) { case 0xC9: /* House name */ default: DEBUG(grf, 7) ("VehicleNewName: Unsupported ID (0x%04X)", id); } break; case GSF_INDUSTRIES : case 0x48 : /* for generic strings */ AddGRFString(_cur_spriteid, id, lang, name); break; default : DEBUG(grf,7) ("VehicleNewName: Unsupported feature (0x%02X)", feature); break; #endif } } else { DEBUG(grf, 7) ("VehicleNewName: Too long a name (%d)", ofs); } name += ofs; len -= ofs; } } /* Action 0x05 */ static void GraphicsNew(byte *buf, int len) { /* <05> * * B graphics-type What set of graphics the sprites define. * E num-sprites How many sprites are in this set? * V other data Graphics type specific data. Currently unused. */ /* TODO */ uint8 type; uint16 num; SpriteID replace = 0; check_length(len, 2, "GraphicsNew"); buf++; type = grf_load_byte(&buf); num = grf_load_extended(&buf); switch (type) { case 0x04: /* Signal graphics */ if (num != 112 && num != 240) { grfmsg(GMS_WARN, "GraphicsNews: Signal graphics sprite count must be 112 or 240, skipping."); return; } _signal_base = _cur_spriteid; break; case 0x05: /* Catenary graphics */ if (num != 48) { grfmsg(GMS_WARN, "GraphicsNews: Catenary graphics sprite count must be 48, skipping."); return; } replace = SPR_ELRAIL_BASE + 3; break; case 0x06: /* Foundations */ if (num != 74) { grfmsg(GMS_WARN, "GraphicsNews: Foundation graphics sprite count must be 74, skipping."); return; } replace = SPR_SLOPES_BASE; break; case 0x08: /* Canal graphics */ if (num != 65) { grfmsg(GMS_WARN, "GraphicsNews: Canal graphics sprite count must be 65, skipping."); return; } replace = SPR_CANALS_BASE + 5; break; default: grfmsg(GMS_NOTICE, "GraphicsNew: Custom graphics (type 0x%02X) sprite block of length %u (unimplemented, ignoring).\n", type, num); return; } if (replace == 0) { grfmsg(GMS_NOTICE, "GraphicsNew: Loading %u sprites of type 0x%02X at SpriteID 0x%04X", num, type, _cur_spriteid); } else { grfmsg(GMS_NOTICE, "GraphicsNew: Replacing %u sprites of type 0x%02X at SpriteID 0x%04X", num, type, replace); } for (; num > 0; num--) { LoadNextSprite(replace == 0 ? _cur_spriteid++ : replace++, _file_index); _nfo_line++; } } /* Action 0x06 */ static void CfgApply(byte *buf, int len) { /* <06> ... * * B param-num Number of parameter to substitute (First = "zero") * Ignored if that parameter was not specified in newgrf.cfg * B param-size How many bytes to replace. If larger than 4, the * bytes of the following parameter are used. In that * case, nothing is applied unless *all* parameters * were specified. * B offset Offset into data from beginning of next sprite * to place where parameter is to be stored. */ /* TODO */ grfmsg(GMS_NOTICE, "CfgApply: Ignoring (not implemented).\n"); } static uint32 GetParamVal(byte param, uint32 *cond_val) { switch (param) { case 0x83: /* current climate, 0=temp, 1=arctic, 2=trop, 3=toyland */ return _opt.landscape; case 0x84: /* .grf loading stage, 0=initialization, 1=activation */ return _cur_stage; case 0x85: { /* TTDPatch flags, only for bit tests */ uint32 param_val = _ttdpatch_flags[*cond_val / 0x20]; *cond_val %= 0x20; return param_val; } case 0x86: /* road traffic side, bit 4 clear=left, set=right */ return _opt.road_side << 4; case 0x88: /* GRF ID check */ return 0; case 0x8B: { /* TTDPatch version */ uint major = 2; uint minor = 0; uint revision = 10; // special case: 2.0.1 is 2.0.10 uint build = 73; return (major << 24) | (minor << 20) | (revision << 16) | (build * 10); } case 0x8D: /* TTD Version, 00=DOS, 01=Windows */ return !_use_dos_palette; case 0x8E: /* Y-offset for train sprites */ return _traininfo_vehicle_pitch; case 0x92: /* Game mode */ return _game_mode; case 0x9D: /* TTD Platform, 00=TTDPatch, 01=OpenTTD */ return 1; default: /* GRF Parameter */ if (param < 0x80) return _cur_grffile->param[param]; /* In-game variable. */ grfmsg(GMS_WARN, "Unsupported in-game variable 0x%02X.", param); return -1; } } /* Action 0x07 */ /* Action 0x09 */ static void SkipIf(byte *buf, int len) { /* <07/09> * * B param-num * B param-size * B condition-type * V value * B num-sprites */ /* TODO: More params. More condition types. */ uint8 param; uint8 paramsize; uint8 condtype; uint8 numsprites; uint32 param_val = 0; uint32 cond_val = 0; uint32 mask = 0; bool result; GRFLabel *label; GRFLabel *choice = NULL; check_length(len, 6, "SkipIf"); buf++; param = grf_load_byte(&buf); paramsize = grf_load_byte(&buf); condtype = grf_load_byte(&buf); if (condtype < 2) { /* Always 1 for bit tests, the given value should be ignored. */ paramsize = 1; } switch (paramsize) { case 4: cond_val = grf_load_dword(&buf); mask = 0xFFFFFFFF; break; case 2: cond_val = grf_load_word(&buf); mask = 0x0000FFFF; break; case 1: cond_val = grf_load_byte(&buf); mask = 0x000000FF; break; default: break; } if (param < 0x80 && _cur_grffile->param_end <= param) { DEBUG(grf, 7) ("Param %d undefined, skipping test", param); return; } if (param == 0x88 && GetFileByGRFID(cond_val) == NULL) { DEBUG(grf, 7) ("GRFID 0x%08X unknown, skipping test", BSWAP32(cond_val)); return; } param_val = GetParamVal(param, &cond_val); /* Apply parameter mask, only for GRF parameters. */ if (param < 0x80) param_val &= mask; DEBUG(grf, 7) ("Test condtype %d, param 0x%08X, condval 0x%08X", condtype, param_val, cond_val); switch (condtype) { case 0: result = !!(param_val & (1 << cond_val)); break; case 1: result = !(param_val & (1 << cond_val)); break; /* TODO: For the following, make it to work with paramsize>1. */ case 2: result = (param_val == cond_val); break; case 3: result = (param_val != cond_val); break; case 4: result = (param_val < cond_val); break; case 5: result = (param_val > cond_val); break; /* Tests 6 to 10 are only for param 0x88, GRFID checks */ case 6: /* Is GRFID active? */ case 9: /* GRFID is or will be active? */ result = (GetFileByGRFID(cond_val)->flags & 1) == 1; break; case 7: /* Is GRFID non-active? */ case 10: /* GRFID is not nor will be active */ result = (GetFileByGRFID(cond_val)->flags & 1) == 0; break; case 8: /* GRFID is not but will be active? */ result = 0; if ((GetFileByGRFID(cond_val)->flags & 1) == 1) { const GRFFile *file; for (file = _first_grffile; file != NULL; file = file->next) { if (file->grfid == cond_val) break; if (file == _cur_grffile) { result = 1; break; } } } break; default: grfmsg(GMS_WARN, "Unsupported test %d. Ignoring.", condtype); return; } if (!result) { grfmsg(GMS_NOTICE, "Not skipping sprites, test was false."); return; } numsprites = grf_load_byte(&buf); /* numsprites can be a GOTO label if it has been defined in the GRF * file. The jump will always be the first matching label that follows * the current nfo_line. If no matching label is found, the first matching * label in the file is used. */ for (label = _cur_grffile->label; label != NULL; label = label->next) { if (label->label != numsprites) continue; /* Remember a goto before the current line */ if (choice == NULL) choice = label; /* If we find a label here, this is definitely good */ if (label->nfo_line > _nfo_line) { choice = label; break; } } if (choice != NULL) { grfmsg(GMS_NOTICE, "Jumping to label 0x%0X at line %d, test was true.", choice->label, choice->nfo_line); FioSeekTo(choice->pos, SEEK_SET); _nfo_line = choice->nfo_line; return; } grfmsg(GMS_NOTICE, "Skipping %d sprites, test was true.", numsprites); _skip_sprites = numsprites; if (_skip_sprites == 0) { /* Zero means there are no sprites to skip, so * we use -1 to indicate that all further * sprites should be skipped. */ _skip_sprites = -1; } } /* Action 0x08 */ static void GRFInfo(byte *buf, int len) { /* <08> * * B version newgrf version, currently 06 * 4*B grf-id globally unique ID of this .grf file * S name name of this .grf set * S info string describing the set, and e.g. author and copyright */ /* TODO: Check version. (We should have own versioning done somehow.) */ uint8 version; uint32 grfid; const char *name; const char *info; check_length(len, 8, "GRFInfo"); buf++; version = grf_load_byte(&buf); grfid = grf_load_dword(&buf); name = (const char*)buf; info = name + strlen(name) + 1; _cur_grffile->grfid = grfid; _cur_grffile->grf_version = version; _cur_grffile->flags |= 0x0001; /* set active flag */ /* Do swap the GRFID for displaying purposes since people expect that */ DEBUG(grf, 1) ("[%s] Loaded GRFv%d set %08lx - %s:\n%s", _cur_grffile->filename, version, BSWAP32(grfid), name, info); } /* Action 0x0A */ static void SpriteReplace(byte *buf, int len) { /* <0A> [ ...] * : * * B num-sets How many sets of sprites to replace. * Each set: * B num-sprites How many sprites are in this set * W first-sprite First sprite number to replace */ uint8 num_sets; uint i; buf++; /* skip action byte */ num_sets = grf_load_byte(&buf); for (i = 0; i < num_sets; i++) { uint8 num_sprites = grf_load_byte(&buf); uint16 first_sprite = grf_load_word(&buf); uint j; grfmsg(GMS_NOTICE, "SpriteReplace: [Set %d] Changing %d sprites, beginning with %d", i, num_sprites, first_sprite ); for (j = 0; j < num_sprites; j++) { LoadNextSprite(first_sprite + j, _file_index); // XXX _nfo_line++; } } } /* Action 0x0B */ static void GRFError(byte *buf, int len) { /* <0B> [ 00] [] 00 [] * * B severity 00: notice, contine loading grf file * 01: warning, continue loading grf file * 02: error, but continue loading grf file, and attempt * loading grf again when loading or starting next game * 03: error, abort loading and prevent loading again in * the future (only when restarting the patch) * B language-id see action 4, use 1F for built-in error messages * B message-id message to show, see below * S message for custom messages (message-id FF), text of the message * not present for built-in messages. * V data additional data for built-in (or custom) messages * B parnum see action 6, only used with built-in message 03 */ /* TODO: For now we just show the message, sometimes incomplete and never translated. */ static const char * const msgstr[4] = { "Requires at least pseudo-TTDPatch version %s.", "This file is for %s version of TTD.", "Designed to be used with %s.", "Invalid parameter %s.", }; uint8 severity; uint8 msgid; check_length(len, 6, "GRFError"); severity = buf[1]; msgid = buf[3]; // Undocumented TTDPatch feature. if ((severity & 0x80) == 0 && _cur_stage < 2) { DEBUG(grf, 7) ("Skipping non-fatal GRFError in stage 1"); return; } severity &= 0x7F; if (msgid == 0xFF) { grfmsg(severity, "%s", buf+4); } else { grfmsg(severity, msgstr[msgid], buf+4); } } /* Action 0x0C */ static void GRFComment(byte *buf, int len) { /* <0C> [] * * V ignored Anything following the 0C is ignored */ static char comment[256]; if (len == 1) return; ttd_strlcpy(comment, (char*)(buf + 1), minu(sizeof(comment), len)); grfmsg(GMS_NOTICE, "GRFComment: %s", comment); } /* Action 0x0D */ static void ParamSet(byte *buf, int len) { /* <0D> [] * * B target parameter number where result is stored * B operation operation to perform, see below * B source1 first source operand * B source2 second source operand * D data data to use in the calculation, not necessary * if both source1 and source2 refer to actual parameters * * Operations * 00 Set parameter equal to source1 * 01 Addition, source1 + source2 * 02 Subtraction, source1 - source2 * 03 Unsigned multiplication, source1 * source2 (both unsigned) * 04 Signed multiplication, source1 * source2 (both signed) * 05 Unsigned bit shift, source1 by source2 (source2 taken to be a * signed quantity; left shift if positive and right shift if * negative, source1 is unsigned) * 06 Signed bit shift, source1 by source2 * (source2 like in 05, and source1 as well) */ byte target; byte oper; uint32 src1; uint32 src2; uint32 data = 0; uint32 res; check_length(len, 5, "ParamSet"); buf++; target = grf_load_byte(&buf); oper = grf_load_byte(&buf); src1 = grf_load_byte(&buf); src2 = grf_load_byte(&buf); if (len >= 8) data = grf_load_dword(&buf); /* You can add 80 to the operation to make it apply only if the target * is not defined yet. In this respect, a parameter is taken to be * defined if any of the following applies: * - it has been set to any value in the newgrf(w).cfg parameter list * - it OR A PARAMETER WITH HIGHER NUMBER has been set to any value by * an earlier action D */ if (oper & 0x80) { if (target < 0x80 && target < _cur_grffile->param_end) { DEBUG(grf, 7) ("Param %u already defined, skipping.", target); return; } oper &= 0x7F; } /* The source1 and source2 operands refer to the grf parameter number * like in action 6 and 7. In addition, they can refer to the special * variables available in action 7, or they can be FF to use the value * of . If referring to parameters that are undefined, a value * of 0 is used instead. */ if (src1 == 0xFF) { src1 = data; } else { uint32 temp; src1 = GetParamVal(src1, &temp); } if (src2 == 0xFF) { src2 = data; } else { uint32 temp; src2 = GetParamVal(src2, &temp); } /* TODO: You can access the parameters of another GRF file by using * source2=FE, source1=the other GRF's parameter number and data=GRF * ID. This is only valid with operation 00 (set). If the GRF ID * cannot be found, a value of 0 is used for the parameter value * instead. */ switch (oper) { case 0x00: res = src1; break; case 0x01: res = src1 + src2; break; case 0x02: res = src1 - src2; break; case 0x03: res = src1 * src2; break; case 0x04: res = (int32)src1 * (int32)src2; break; case 0x05: if ((int32)src2 < 0) res = src1 >> -(int32)src2; else res = src1 << src2; break; case 0x06: if ((int32)src2 < 0) res = (int32)src1 >> -(int32)src2; else res = (int32)src1 << src2; break; case 0x07: /* Bitwise AND */ res = src1 & src2; break; case 0x08: /* Bitwise OR */ res = src1 | src2; break; case 0x09: /* Unsigned division */ if (src2 == 0) { res = src1; } else { res = src1 / src2; } break; case 0x0A: /* Signed divison */ if (src2 == 0) { res = src1; } else { res = (int32)src1 / (int32)src2; } break; case 0x0B: /* Unsigned modulo */ if (src2 == 0) { res = src1; } else { res = src1 % src2; } break; case 0x0C: /* Signed modulo */ if (src2 == 0) { res = src1; } else { res = (int32)src1 % (int32)src2; } break; default: grfmsg(GMS_ERROR, "ParamSet: Unknown operation %d, skipping.", oper); return; } switch (target) { case 0x8E: // Y-Offset for train sprites _traininfo_vehicle_pitch = res; break; // TODO implement case 0x8F: // Rail track type cost factors case 0x93: // Tile refresh offset to left case 0x94: // Tile refresh offset to right case 0x95: // Tile refresh offset upwards case 0x96: // Tile refresh offset downwards case 0x97: // Snow line height case 0x99: // Global ID offset DEBUG(grf, 7) ("ParamSet: Skipping unimplemented target 0x%02X", target); break; default: if (target < 0x80) { _cur_grffile->param[target] = res; if (target + 1U > _cur_grffile->param_end) _cur_grffile->param_end = target + 1; } else { DEBUG(grf, 7) ("ParamSet: Skipping unknown target 0x%02X", target); } break; } } /* Action 0x0E */ static void GRFInhibit(byte *buf, int len) { /* <0E> * * B num Number of GRFIDs that follow * D grfids GRFIDs of the files to deactivate */ byte num; int i; check_length(len, 1, "GRFInhibit"); buf++, len--; num = grf_load_byte(&buf); len--; check_length(len, 4 * num, "GRFInhibit"); for (i = 0; i < num; i++) { uint32 grfid = grf_load_dword(&buf); GRFFile *file = GetFileByGRFID(grfid); /* Unset activation flag */ if (file != NULL) { grfmsg(GMS_NOTICE, "GRFInhibit: Deactivating file ``%s''", file->filename); file->flags &= 0xFFFE; } } } /* Action 0x10 */ static void DefineGotoLabel(byte *buf, int len) { /* <10>