Some explanations about Desyncs Last updated: 2014-02-23 ------------------------------------------------------------------------ Table of contents ----------------- 1.0) Desync theory * 1.1) OpenTTD multiplayer architecture * 1.2) What is a Desync and how is it detected * 1.3) Typical causes of Desyncs 2.0) What to do in case of a Desync * 2.1) Cache debugging * 2.2) Desync recording 3.0) Evaluating the Desync records * 3.1) Replaying * 3.2) Evaluation the replay * 3.3) Comparing savegames 1.1) OpenTTD multiplayer architecture ---- -------------------------------- OpenTTD has a huge gamestate, which changes all of the time. The savegame contains the complete gamestate at a specific point in time. But this state changes completely each tick: Vehicles move and trees grow. However, most of these changes in the gamestate are deterministic: Without a player interfering a vehicle follows its orders always in the same way, and trees always grow the same. In OpenTTD multiplayer synchronisation works by creating a savegame when clients join, and then transfering that savegame to the client, so it has the complete gamestate at a fixed point in time. Afterwards clients only receive 'commands', that is: Stuff which is not predictable, like - player actions - AI actions - GameScript actions - Admin Port command - rcon commands - ... These commands contain the information on how to execute the command, and when to execute it. Time is measured in 'network frames'. Mind that network frames to not match ingame time. Network frames also run while the game is paused, to give a defined behaviour to stuff that is executing while the game is paused. The deterministic part of the gamestate is run by the clients on their own. All they get from the server is the instruction to run the gamestate up to a certain network time, which basically says that there are no commands scheduled in that time. When a client (which includes the server itself) wants to execute a command (i.e. a non-predictable action), it does this by - calling DoCommandP resp. DoCommandPInternal - These functions first do a local test-run of the command to check simple preconditions. (Just to give the client an immediate response without bothering the server and waiting for the response.) The test-run may not actually change the gamestate, all changes must be discarded. - If the local test-run succeeds the command is sent to the server. - The server inserts the command into the command queue, which assigns a network frame to the commands, i.e. when it shall be executed on all clients. - Enhanced with this specific timestamp, the command is send to all clients, which execute the command simultaneously in the same network frame in the same order. 1.2) What is a Desync and how is it detected ---- --------------------------------------- In the ideal case all clients have the same gamestate as the server and run in sync. That is, vehicle movement is the same on all clients, and commands are executed the same everywhere and have the same results. When a Desync happens, it means that the gamestates on the clients (including the server) are no longer the same. Just imagine that a vehicle picks the left line instead of the right line at a junction on one client. The important thing here is, that noone notices when a Desync occurs. The desync client will continue to simulate the gamestate and execute commands from the server. Once the gamestate differs it will increasingly spiral out of control: If a vehicle picks a different route, it will arrive at a different time at a station, which will load different cargo, which causes other vehicles to load other stuff, which causes industries to notice different servicing, which causes industries to change production, ... the client could run all day in a different universe. To limit how long a Desync can remain unnoticed, the server transfers some checksums every now and then for the gamestate. Currently this checksum is the state of the random number generator of the game logic. A lot of things in OpenTTD depend on the RNG, and if the gamestate differs, it is likely that the RNG is called at different times, and the state differs when checked. The clients compare this 'checksum' with the checksum of their own gamestate at the specific network frame. If they differ, the client disconnects with a Desync error. The important thing here is: The detection of the Desync is only an ultimate failure detection. It does not give any indication on when the Desync happened. The Desync may after all have occured long ago, and just did not affect the checksum up to now. The checksum may have matched 10 times or more since the Desync happend, and only now the Desync has spiraled enough to finally affect the checksum. (There was once a desync which was only noticed by the checksum after 20 game years.) 1.3) Typical causes of Desyncs ---- ------------------------- Desyncs can be caused by the following scenarios: - The savegame does not describe the complete gamestate. - Some information which affects the progression of the gamestate is not saved in the savegame. - Some information which affects the progression of the gamestate is not loaded from the savegame. This includes the case that something is not completely reset before loading the savegame, so data from the previous game is carried over to the new one. - The gamestate does not behave deterministic. - Cache mismatch: The game logic depends on some cached values, which are not invalidated properly. This is the usual case for NewGRF-specific Desyncs. - Undefined behaviour: The game logic performs multiple things in an undefined order or with an undefined result. E.g. when sorting something with a key while some keys are equal. Or some computation that depends on the CPU architecture (32/64 bit, little/big endian). - The gamestate is modified when it shall not be modified. - The test-run of a command alters the gamestate. - The gamestate is altered by a player or script without using commands. 2.1) Cache debugging ---- --------------- Desyncs which are caused by inproper cache validation can often be found by enabling cache validation: - Start OpenTTD with '-d desync=2'. - This will enable validation of caches every tick. That is, cached values are recomputed every tick and compared to the cached value. - Differences are logged to 'commands-out.log' in the autosave folder. Mind that this type of debugging can also be done in singleplayer. 2.2) Desync recording ---- ---------------- If you have a server, which happens to encounter Desyncs often, you can enable recording of the gamestate alterations. This will later allow the replay the gamestate and locate the Desync cause. There are two levels of Desync recording, which are enabled via '-d desync=2' resp. '-d desync=3'. Both will record all commands to a file 'commands-out.log' in the autosave folder. If you have the savegame from the start of the server, and this command log you can replay the whole game. (see Section 3.1) If you do not start the server from a savegame, there will also be a savegame created just after a map has been generated. The savegame will be named 'dmp_cmds_*.sav' and be put into the autosave folder. In addition to that '-d desync=3' also creates regular savegames at defined spots in network time. (more defined than regular autosaves). These will be created in the autosave folder and will also be named 'dmp_cmds_*.sav'. These saves allow comparing the gamestate with the original gamestate during replaying, and thus greatly help debugging. However, they also take a lot of disk space. 3.1) Replaying ---- --------- To replay a Desync recording, you need these files: - The savegame from when the server was started, resp. the automatically created savegame from when the map was generated. - The 'commands-out.log' file. - Optionally the 'dmp_cmds_*.sav'. Put these files into a safe spot. (Not your autosave folder!) Next, prepare your OpenTTD for replaying: - Get the same version of OpenTTD as the original server was running. - Uncomment/enable the define 'DEBUG_DUMP_COMMANDS' in 'src/network/network_func.h'. - Put the 'commands-out.log' into the root save folder, and rename it to 'commands.log'. - Run 'openttd -D -d desync=3 -g startsavegame.sav'. This replays the server log and creates new 'commands-out.log' and 'dmp_cmds_*.sav' in your autosave folder. 3.2) Evaluation the replay ---- --------------------- The replaying will also compare the checksums which are part of the 'commands-out.log' with the replayed gamestate. If they differ, it will trigger a 'NOT_REACHED'. If the replay succeeds without mismatch, that is the replay reproduces the original server state: - Repeat the replay starting from incrementally later 'dmp_cmds_*.sav' while truncating the 'commands.log' at the beginning appropriately. The 'dmp_cmds_*.sav' can be your own ones from the first reply, or the ones from the original server (if you have them). (This simulates the view of joining clients during the game.) - If one of those replays fails, you have located the Desync between the last dmp_cmds that reproduces the replay and the first one that fails. If you have the original 'dmp_cmds_*.sav', you can also compare those savegames with your own ones from the replay. You can also comment/disable the 'NOT_REACHED' mentioned above, to get another 'dmp_cmds_*.sav' from the replay after the mismatch has already been detected. See Section 3.2 on how to compare savegames. If the saves differ you have located the Desync between the last dmp_cmds that match and the first one that does not. The difference of the saves may point you in the direction of what causes it. If the replay succeeds without mismatch, and you do not have any 'dmp_cmd_*.sav' from the original server, it is a lost case. Enable creation of the 'dmp_cmd_*.sav' on the server, and wait for the next Desync. Finally, you can also compare the 'commands-out.log' from the original server with the one from the replay. They will differ in stuff like dates, and the original log will contain the chat, but otherwise they should match. 3.2) Comparing savegames ---- ------------------- The binary form of the savegames from the original server and from your replay will always differ: - The savegame contains paths to used NewGRF files. - The gamelog will log your loading of the savegame. - The savegame data of AIs and the Gamescript will differ. Scripts are not run during the replay, only their recorded commands are replayed. Their internal state will thus not change in the replay and will differ. To compare savegame more semantically, there exist some ugly hackish tools at: http://devs.openttd.org/~frosch/texts/zpipe.c http://devs.openttd.org/~frosch/texts/printhunk.c The first one decompresses OpenTTD savegames. The second one creates a textual representation of an uncompressed savegame, by parsing hunks and arrays and such. With both tools you need to be a bit careful since they work on stdin and stdout, which may not deal well with binary data. If you have the textual representation of the savegames, you can compare them with regular diff tools.