-`9` - `StringID` / `SLE_FILE_STRINGID` - a StringID inside the OpenTTD's string table
-`10` - `str` / `SLE_FILE_STRING` - a string (prefixed with a length-field)
-`11` - `struct` / `SLE_FILE_STRUCT` - a struct
### Gamma value
There is also a field-type called `gamma`.
This is most often used for length-fields, and uses as few bytes as possible to store an integer.
For values <= 127, it uses a single byte.
For values > 127, it uses two bytes and sets the highest bit to high.
For values > 32767, it uses three bytes and sets the two highest bits to high.
And this continues till the value fits.
In a more visual approach:
```
0xxxxxxx
10xxxxxx xxxxxxxx
110xxxxx xxxxxxxx xxxxxxxx
1110xxxx xxxxxxxx xxxxxxxx xxxxxxxx
11110--- xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
```
## Chunks
Savegames for OpenTTD store their data in chunks.
Each chunk contains data for a certain part of the game, for example "Companies", "Vehicles", etc.
`[0..3]` - Each chunk starts with four bytes to indicate the tag.
If the tag is `\x00\x00\x00\x00` it means the end of the savegame is reached.
An example of a valid tag is `PLYR` when looking at it via ASCII, which contains the information of all the companies.
`[4..4]` - Next follows a byte where the lower 4 bits contain the type.
The possible valid types are:
-`0` - `CH_RIFF` - This chunk is a binary blob.
-`1` - `CH_ARRAY` - This chunk is a list of items.
-`2` - `CH_SPARSE_ARRAY` - This chunk is a list of items.
-`3` - `CH_TABLE` - This chunk is self-describing list of items.
-`4` - `CH_SPARSE_TABLE` - This chunk is self-describing list of items.
Now per type the format is (slightly) different.
### CH_RIFF
(since savegame version 295, this chunk type is only used for MAP-chunks, containing bit-information about each tile on the map)
A `CH_RIFF` starts with an `uint24` which together with the upper-bits of the type defines the length of the chunk.
In pseudo-code:
```
type = read uint8
if type == 0
length = read uint24
length |= ((type >> 4) <<24)
```
The next `length` bytes are part of the chunk.
What those bytes mean depends on the tag of the chunk; further details per chunk can be found in the source-code.
### CH_ARRAY / CH_SPARSE_ARRAY
(this chunk type is deprecated since savegame version 295 and is no longer in use)
`[0..G1]` - A `CH_ARRAY` / `CH_SPARSE_ARRAY` starts with a `gamma`, indicating the size of the next item plus one.
If this size value is zero, it indicates the end of the list.
This indicates the full length of the next item minus one.
In psuedo-code:
```
loop
size = read gamma - 1
if size == -1
break loop
read <size> bytes
```
`[]` - For `CH_ARRAY` there is an implicit index.
The loop starts at zero, and every iteration adds one to the index.
For entries in the game that were not allocated, the `size` will be zero.
`[G1+1..G2]` - For `CH_SPARSE_ARRAY` there is an explicit index.
The `gamma` following the size indicates the index.
The content of the item is a binary blob, and similar to `CH_RIFF`, it depends on the tag of the chunk what it means.
Please check the source-code for further details.
### CH_TABLE / CH_SPARSE_TABLE
(this chunk type only exists since savegame version 295)
Both `CH_TABLE` and `CH_SPARSE_TABLE` are very similar to `CH_ARRAY` / `CH_SPARSE_ARRAY` respectively.
The only change is that the chunk starts with a header.
This header describes the chunk in details; with the header you know the meaning of each byte in the binary blob that follows.
`[0..G]` - The header starts with a `gamma` to indicate the size of all the headers in this chunk plus one.
If this size value is zero, it means there is no header, which should never be the case.
Next follows a list of `(type, key)` pairs:
-`[0..0]` - Type of the field.
-`[1..G]` - `gamma` to indicate length of key.
-`[G+1..N]` - Key (in UTF-8) of the field.
If at any point `type` is zero, the list stops (and no `key` follows).
The `type`'s lower 4 bits indicate the data-type (see chapter above).
The `type`'s 5th bit (so `0x10`) indicates if the field is a list, and if this field in every record starts with a `gamma` to indicate how many times the `type` is repeated.
If the `type` indicates either a `struct` or `str`, the `0x10` flag is also always set.
As the savegame format allows (list of) structs in structs, if any `struct` type is found, this header will be followed by a header of that struct.
This nesting of structs is stored depth-first, so given this table:
```
type | key
-----------------
uint8 | counter
struct | substruct1
struct | substruct2
```
With `substruct1` being like:
```
type | key
-----------------
uint8 | counter
struct | substruct3
```
The headers will be, in order: `table`, `substruct1`, `substruct3`, `substruct2`, each ending with a `type` is zero field.
After reading all the fields of all the headers, there is a list of records.
To read this, see `CH_ARRAY` / `CH_SPARSE_ARRAY` for details.
As each `type` has a well defined length, you can read the records even without knowing anything about the chunk-tag yourself.
Do remember, that if the `type` had the `0x10` flag active, the field in the record first has a `gamma` to indicate how many times that `type` is repeated.
#### Guidelines for network-compatible patch-packs
For network-compatible patch-packs (client-side patches that can play together with unpatched clients) we advise to prefix the field-name with `__<shortname>` when introducing new fields to an existing chunk.
Example: you have an extra setting called `auto_destroy_rivers` you want to store in the savegame for your patched client called `mypp`.
We advise you to call this setting `__mypp_auto_destroy_rivers` in the settings chunk.
Doing it this way ensures that a savegame created by these patch-packs can still safely be loaded by unpatched clients.
They will simply ignore the field and continue loading the savegame as usual.
The prefix is strongly advised to avoid conflicts with future-settings in an unpatched client or conflicts with other patch-packs.
